Kenmore 110.2233 series Manuel utilisateur

Marque: Kenmore

Modèle: 110.2233 series

Catégorie: Machines à laver

Taper: Manuel utilisateur

Ce manuel convient également à

Use & Care Guide

Manual de uso y cuidado

Guide d’Utilisation et d’Entretien

English / Español / Français

Table of Contents...2 / Índice...18 / Table des matières...36

Kenmore®

Top-Loading Washer

Lavadora de carga superior

Laveuse à chargement par le dessus

* = color number, número de color, le numéro de la couleur

Models/Modelos/Modèles: 110.2022*410, 110.514*410

P/N W10740540A

Sears Brands Management Corporation

Hoffman Estates, IL 60179 U.S.A.

www.kenmore.com

www.sears.com

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2C3

www.sears.ca

Designed to use only HE High Efficiency

detergents.

Diseñada para utilizar solamente

detergentes de alto rendimiento (HE).

Conçue pour l’utilisation de détergents

haute efficacité seulement (HE).

TABLE OF CONTENTS

WASHER SAFETY ................................................................2

WHAT’S NEW UNDER THE LID? ......................................3

CONTROL PANEL AND FEATURES ................................. 4

CYCLE GUIDE ......................................................................6

USING YOUR WASHER .................................................... 7

WASHER MAINTENANCE ...............................................10

TROUBLESHOOTING ....................................................... 12

PROTECTION AGREEMENTS ..........................................17

WARRANTY ........................................................................17

ASSISTANCE OR SERVICE ............................... Back Cover

WASHER SAFETY

WHAT’S NEW UNDER THE LID?

Your new washer will operate dierently than your past agitator-style washer.

For best performance, it is recommended to load items in loose

heaps evenly around the washplate.

As the washer dampens and moves the load, the level of the

items will settle in the basket. This is normal, and does not

indicate that more items should be added.

IMPORTANT:

■ You will not see a washer basket full of water as with your

past agitator-style washer. It is normal for some of the load to

be above the water line.

■ The lid must be closed before the washer basket lls with

water and for wash cycle to start. If lid is open and lling

stops, close lid and press START button to complete cycle.

Choosing the Right Detergent

Use only High Eciency detergents. The package will be

marked “HE” or “High Eciency.” Low-water washing creates

excessive sudsing with a regular non-HE detergent. Using regular

detergent will likely result in longer cycle times and reduced

rinsing performance. It may also result in component failures and

noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the

manufacturer’s instructions to determine the amount of detergent

to use and do not go over the Max line on the dispenser. See

“Using Laundry Product Dispensers” for more information.

Normal Sounds You Can Expect

At dierent stages of the wash cycle, you may hear sounds and

noises that are dierent from those of your previous washer. For

example, you may hear a clicking and hum at the beginning of

the cycle, as the lid lock goes through a self-test. There will be

dierent kinds of humming sounds as the washplate moves the

load and as basket is slowing down to stop. And sometimes, you

may hear nothing at all, as the washer determines the correct

water level for your load or allows time for clothes to soak.

Use only High Efciency (HE) detergent.

Improved Cleaning

Low-water cleaning means concentrated cleaning. Rather

than diluting detergent as done in an agitator-style washer,

this washer delivers the detergent directly to the soils. This low

water wash also allows the clothing to move in a more eective

way to remove soils.

Cleaning with Less Water

The washer automatically adjusts the water level to the load

size—no water level selector is needed.

Traditional agitator-style

washer

Washer with low-water

wash system

Washplate

Automatic Load Size Sensing

Once you start the cycle, the washer will ll to the water level.

When the washer is done lling, it will start to agitate after it

determines the correct water level for the load.

This low-water wash method uses less water and energy

compared to a traditional agitator-style washer.

CONTROL PANEL AND FEATURES

SOIL LEVEL

Select the most suitable setting for your load. For heavily

soiled and sturdy fabrics, select Heavy Soil Level for more

wash time, if needed. For lightly soiled and delicate fabrics,

select Light Soil Level for less wash time, if needed. Lighter soil

level setting will help reduce tangling and wrinkling.

WASH TEMP

Wash Temp senses and maintains uniform water temperatures

by regulating incoming hot and cold water.

Select a wash temperature based on the type of fabric and

soils being washed. For best results and following the garment

label instructions, use the warmest wash water safe for your

fabric.

• On some models and cycles, warm and hot water may be

cooler than your previous washer.

• Even in a cold and cool water wash, some warm

water may be added to the washer to maintain

a minimum temperature. All rinses are cold.

WASH CYCLE KNOB

Use the Wash Cycle knob to select cycles on your washer.

See “Cycle Guide” for detailed descriptions of cycles.

START/PAUSE/Unlock Lid button

Press to start the selected cycle; press again to pause the

cycle and unlock the lid.

NOTE: If the washer is spinning, it may take several minutes to

unlock the lid. Press and hold for 3 seconds to cancel a cycle.

CYCLE STATUS LIGHTS INDICATOR

The Cycle Status Lights show the progress of a cycle. At each

stage of the process, you may notice sounds or pauses that

are dierent from traditional washers.

SENSING

When the Start/Pause button is pressed, the washer will ll

and begin sensing to determine the load size.

Once sensing is complete, the washer will ll to the

detected load size and then begin the wash phase of the

cycle.

NOTE: Sensing ll and agitation phases will be paused by

opening the unlocked lid. Close the lid to resume the cycle.

If the lid is left open for more than 10 minutes the washer

will cancel the cycle and pump out the water. The lid will

lock after the wash phase to begin the initial spin out and

remain locked for the remainder of the cycle.

WASH

You will hear the motor and agitator moving the load.

During the rst stage of the sensing/wash cycle, water will

partially ll the washer and then begin to move the load. It

is normal to have the sensing light on during this stage. You

will hear the agitator rotate, followed by a several second

pause. This process will repeat for several minutes, allowing

the entire load to become saturated. The lower water

level combined with HE detergent at this stage allows for

concentrated cleaning. Concentrated cleaning delivers the

detergent directly to the soils. It is normal for the load to

be above the water line during this stage. At the beginning

of the second stage, the washer will add water to the

correct level based on the load size. You will hear the

agitator move quicker during this stage of the wash cycle.

The motor sounds may change at dierent stages in the

wash cycle.

2 31

Not all features and options are available on all models.

Appearance may vary.

RINSE

You will hear sounds similar to the wash cycle as the

washer rinses and moves the load. You may hear the

motor turning on briey (short hum) to move the basket

while lling.

SPIN

The washer spins the load at increasing speeds for

proper water removal, based on the selected cycle

and spin speed.

COMPLETE

Once the cycle is complete, this light will come on.

Remove the load promptly for best results.

LID LOCKED

To allow for proper load sensing and

spinning, the lid will lock and the Lid

Locked light will turn on. This light

indicates that the lid is locked and

cannot be opened.

If you need to open the lid, press START/

Pause/Unlock Lid. The lid will unlock once

the washer movement has stopped. This may

take several minutes if the load was spinning at

high speed. Press START/Pause/Unlock Lid again

to resume the cycle. Avoid opening the lid during

sensing. The sensing process will start over when

the washer is restarted.

CYCLE GUIDE

For best fabric care, choose the cycle that best ts the load being washed.

Recommended settings for best performance are shown in Bold.

Not all cycles and options are available on all models.

*All rinses are cold.

Heavily soiled

fabrics

Soak Heavy Hot

Warm

Cool Lights

Cool Darks

Cold

Use this cycle to soak small spots of set in stains on fabrics.

The washer will use intermittent agitation and soaking.

After time has expired, water will drain, but the washer

will not spin. Cycle is complete.

Casual and mixed

loads, jeans, towels,

sturdy fabrics

Deep Wash Medium Hot

Warm

Cool Lights

Cool Darks

Cold

Provides additional water and alternating wash action for

heavily soiled mixed loads. Water-level sensing process

may take longer for some items than for others because

they will absorb more water than other fabric types.

Sturdy fabrics,

colorfast items,

towels, sheets, jeans

Heavy Duty Heavy

Hot

Warm

Cool Lights

Cool Darks

Cold

Use this cycle for normally soiled or sturdy fabrics.

Cottons, linens, and

mixed garment

loads

Normal Medium Hot

Warm

Cool Lights

Cool Darks

Cold

Use this cycle for normally soiled cottons and mixed

fabric loads.

No-iron fabrics,

cottons, perm press,

linens, synthetics

Casual Medium Hot

Warm

Cool Lights

Cool Darks

Cold

Use this cycle to wash loads of no-iron fabrics such as

sport shirts, blouses, casual business clothes, permanent

press, and blends.

Machine-wash silks,

lingerie, washable

wools

Delicates Light Hot

Warm

Cool Lights

Cool Darks

Cold

Use this cycle to wash lightly soiled garments indicating

“Machine Washable Silks” or “Gentle” cycle on the care

label. Place small items in mesh garment bags before

washing.

Swimsuits and items

requiring rinsing

without detergent

Rinse/

Spin

N/A Cold Combines a rinse and spin for loads requiring an additional

rinse cycle or to complete a load after power interruption.

Also use for loads that require rinsing only.

Hand-wash items or

dripping wet items

Drain/

Spin

N/A N/A This cycle uses a spin to shorten drying times for heavy

fabrics or special-care items washed by hand. Use

this cycle to drain washer after canceling a cycle or

completing a cycle after a power failure.

No clothes in washer Clean Washer N/A

Hot

Use this cycle every 30 washes to keep the inside of

your washer fresh and clean. This cycle uses a higher

water level. Use with liquid chlorine bleach to thoroughly

clean the inside of your washer. This cycle should not be

interrupted. See “Washer Care.”

IMPORTANT: Do not place garments or other items in the

washer during the Clean Washer cycle. Use this cycle with

an empty wash tub.

Items to wash: Cycle: Soil Level Wash

Temp*:

Cycle Details:

USING YOUR WASHER

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

re, or electrical shock.

WARNING

• Empty pockets. Loose change, buttons, or any small object

can pass under the agitator and become trapped, causing

unexpected sounds.

• Sort items by recommended cycle, water temperature,

and colorfastness.

• Separate heavily soiled items from lightly soiled.

• Separate delicate items from sturdy fabrics.

• Do not dry garments if stains remain after washing, because

heat can set stains into fabric.

• Treat stains promptly.

• Close zippers, fasten hooks, tie strings and sashes, and remove

non-washable trim and ornaments.

• Mend rips and tears to avoid further damage to items

during washing.

Helpful Tips:

• When washing water-proof or water-resistant items, load

evenly.

• Use mesh garment bags to help avoid tangling when washing

delicate or small items.

• Turn knits inside out to avoid pilling. Separate lint-takers from

lint-givers. Synthetics, knits, and corduroy fabrics will pick up

lint from towels, rugs, and chenille fabrics.

NOTE: Always read and follow fabric care labels instructions to

avoid damage to your garments.

1. Sort and prepare your laundry

Add a measured of amount of detergent or single-dose laundry

packet into the basket.

If using Oxi-type boosters, color-safe bleach, or fabric softener

crystals, add to the bottom of the washer basket before adding

clothes.

IMPORTANT: Use only High Eciency detergents. The package

will be marked “HE” or “High Eciency.” Low-water washing

creates excessive sudsing with a regular non-HE detergent. Using

regular detergent will likely result in longer cycle times and

reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew. HE detergents are made

to produce the right amount of suds for the best performance.

Follow the manufacturer’s instructions to determine the amount

of detergent to use.

NOTE: Follow the manufacturer’s instructions to determine the

amount of laundry products to use.

2. Add laundry products

5. Add fabric softener to dispenser

(on some models)

Pour a measured amount of liquid fabric

softener into dispenser; always follow

manufacturer’s directions for correct amount

of fabric softener based on your load size.

Dilute liquid fabric softener by lling the

dispenser with warm water until liquid reaches the underside of

the rim. See max ll line arrows.

Adding Liquid Fabric Softener Manually to Wash Load

During the nal rinse, wait until the washer has completed

lling, press the START/PAUSE/Unlock Lid button to pause

the washer. Lift the lid and add the measured recommended

amount of liquid fabric softener. Do not allow liquid fabric

softener to spill, splash, drip, or run into the basket or on load.

Do not use more than the recommended amount. Close the lid

and press the START/PAUSE/Unlock Lid button again to start

the washer.

Liquid

Chlorine Bleach

4. Add liquid chlorine bleach

to dispenser

Do not overll, dilute, or use more than 1 cup (250 mL).

Do not use color-safe bleach or Oxi products in the same

cycle with liquid chlorine bleach.

Turn cycle knob to choose your wash cycle. For more

information, see “Cycle Guide”.

6. Select cycle

Load garments in loose heaps evenly

around basket wall. For best results, do

not pack the load tightly. Do not wrap

large items such as sheets around the

agitator; load them in loose piles around

the sides of the basket. Try mixing

dierent sized items to reduce tangling.

IMPORTANT: Do not tightly pack or force

items into washer. Items need to move freely for best cleaning

and to reduce wrinkling and tangling.

3. Load laundry into washer

MAX FILL

7. Select SOIL LEVEL

Once you select a cycle, select the soil level by turning the

Soil Level knob to the desired setting.

8. Select WASH TEMPERATURE

Select the Wash Temperature by turning knob to desired

temperature. All rinses are tap cold.

NOTE: Always read and follow fabric care label instructions

to avoid damage to your garments.

9. Press START/PAUSE/Unlock Lid

to begin wash cycle

Press the START/PAUSE/Unlock Lid button to start the wash

cycle. When the cycle has nished, the Cycle Complete

status light will light. Promptly remove garments after cycle

has completed to avoid odor, reduce wrinkling, and rusting of

metal hooks, zippers, and snaps.

Unlocking the lid to add garments

If you need to open the lid to add 1 or 2 missed garments:

Press START/PAUSE/Unlock Lid; the lid will unlock once the

washer movement has stopped. This may take several minutes

if the load was spinning at high speed. Then close lid and press

START/PAUSE/Unlock Lid again to restart the cycle.

NOTES:

■ Washer will not ll with the lid open.

■ If your washer does not have a soak option, then pause

your washer to soak by pressing the Start/Pause button.

Soaking should be done with the lid closed. When you are

done soaking, press the Start/Pause button to bring washer

out of Pause and resume the cycle.

IMPORTANT: If lid is left open for more than 10 minutes, the

water will pump out automatically.

Wash Temp Suggested Fabrics

Hot

Some cold water is added

to save energy. This may be

cooler than your hot water

heater setting.

Whites and pastels

Durable garments

Heavy soils

Warm

Some cold water may be

added, so this will be cooler

than what your previous washer

provided.

Bright colors

Moderate to light soils

Cool Lights

Warm water is added to assist

in soil removal and to help

dissolve detergents. Cool is

slightly warmer than cold.

Colors that bleed or fade

Light soils

Cool Darks

Warm water is added to assist

in soil removal and to help

dissolve detergents. Cool is

slightly warmer than cold.

Dark colors that bleed or fade

Light soils

Cold

Warm water may be added

to assist in soil removal and to

help dissolve detergents.

Dark colors that bleed or fade

Light soils

Operate your washer only when you are home. If moving, or

not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer.

2. Turn o water supply to washer, to avoid ooding due to

water pressure surge.

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in

hoses, freezing can damage washer. If storing or moving

during freezing weather, winterize your washer.

To winterize washer:

1. Shut o both water faucets; disconnect and drain water

inlet hoses.

2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run

washer on Rinse/Spin cycle for about 30 seconds to mix

antifreeze and remaining water.

3. Unplug washer or disconnect power.

NON-USE AND VACATION CARE

WASHER MAINTENANCE

Replace inlet hoses after 5 years of use to reduce the risk of

hose failure. Periodically inspect and replace inlet hoses if

bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of

replacement on the label with a permanent marker.

NOTE: This washer does not include inlet hoses. See the

“Installation Instructions” for more information.

WATER INLET HOSES

WASHER CARE

Recommendations to Help Keep Your Washer Clean and

Performing at its Best

1. Always follow the detergent manufacturer’s instructions

regarding the amount of detergent to use. Never use more

than the recommended amount because that may increase

the rate at which detergent and soil residue accumulate

inside your washer, which in turn may result

in undesirable odor.

2. Use warm and hot wash water settings sometimes (not

exclusively cold water washes), because they do a better

job of controlling the rate at which soils and detergent

accumulate.

3. Always leave the washer lid open between uses to help dry

out the washer and prevent the buildup of odor-causing

residue.

Cleaning Your Top Loading Washer

Read these instructions completely before beginning the

routine cleaning processes recommended below. This Washer

Maintenance Procedure should be performed, at a minimum,

once per month or every 30 wash cycles, whichever occurs

sooner, to control the rate at which soils and detergent may

otherwise accumulate in your washer.

Cleaning the Inside of the Washer

To keep your washer odor-free, follow the usage instructions

provided above, and use this recommended monthly cleaning

procedure:

Recommended Cycle for Cleaning the Washer

Refer to the “Cycle Guide” for the optimal cycle for cleaning

the inside of the washer. Use this cycle with aresh

Washer

Cleaner or liquid chlorine bleach as described below.

Begin procedure

1. aresh

Washer Cleaner Cycle Procedure (Recommended

for Best Performance):

a. Open the washer lid and remove any clothing or items.

b. Place an aresh

Washer Cleaner tablet in the bottom

of the washer basket.

c. Do not place an aresh

Washer Cleaner tablet

in the detergent dispenser.

d. Do not add any detergent or other chemical to the

washer when following this procedure.

e. Close the washer lid.

f. Select the cycle recommended for cleaning the inside

of the washer.

g. Press the START/PAUSE/Unlock Lid button to start the

cycle.

NOTE: For best results, do not interrupt cycle. If cycle must

be interrupted, press START/PAUSE/Unlock Lid once. After

the cycle has stopped, run a RINSE/SPIN cycle to rinse

cleaner from washer.

WASHER CARE

2. Chlorine Bleach Procedure (Alternative):

a. Open the washer lid and remove any clothing or items.

b. Add 1 cup (236 mL) of liquid chlorine bleach to the

bleach compartment.

NOTE: Use of more liquid chlorine bleach than is

recommended above could cause washer damage

over time.

c. Close the washer lid.

d. Do not add any detergent or other chemical to the

washer when following this procedure.

e. Select the cycle recommended for cleaning the inside of

the washer.

f. Press the START/PAUSE/Unlock Lid button to start the

cycle.

NOTE: For best results, do not interrupt cycle. If cycle must

be interrupted, press START/PAUSE/Unlock Lid once. After

the cycle has stopped, run a RINSE/SPIN cycle to rinse

cleaner from washer.

Cleaning the Dispensers

After a period of using your washer, you may nd some

residue buildup in the washer’s dispensers. To remove residue

from the dispensers, wipe them with a damp cloth and towel

dry. Do not attempt to remove the dispensers or trim for

cleaning. The dispensers and trim are not removable. If your

model has a dispenser drawer, however, remove the drawer

and clean it before or after you run the Clean Washer cycle.

Use an all-purpose surface cleaner, if needed.

Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe away any spills.

Use only mild soaps or cleaners when cleaning external

washer surfaces.

IMPORTANT: To avoid damaging the washer’s nish, do not

use abrasive products.

TRANSPORTING YOUR WASHER

1. Shut o both water faucets. Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

Winter Storage Care directions before moving.

3. Disconnect drain from drain system and drain any

remaining water into a pan or bucket. Disconnect drain hose

from back of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer basket.

6. Drape power cord over edge and into washer basket.

7. Place packing tray from original shipping materials back

inside washer. If you do not have packing tray, place heavy

blankets or towels into basket opening. Close lid and place

tape over lid and down front of washer. Keep lid taped

until washer is placed in new location. Transport washer in

upright position.

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,

or moving:

1. Refer to “Installation Instructions” to locate, level, and

connect washer.

2. Before using again, run washer through the following

recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

re, or electrical shock.

WARNING

2. Plug in washer or reconnect power.

3. Run washer through Clean Washer cycle to clean washer

and remove antifreeze, if used. Use half the manufacturer’s

recommended amount for a medium-size load.

TROUBLESHOOTING

If you experience Possible Causes Solution

Vibration or Off-Balance

Check the following for

proper installation or

see “Using Your Washer”

section.

Feet may not be in contact with the

oor and locked.

Front and rear feet must be in rm contact with oor, and

washer must be level to operate properly.

Washer may not be level. Check oor for exing or sagging. If ooring is uneven, a 3/4"

(19 mm) piece of plywood under your washer will reduce sound.

See “Level the Washer” in Installation Instructions.

Load could be unbalanced. Load dry items in loose heaps evenly around basket wall.

Adding wet items to washer or adding more water to basket

could unbalance washer.

Wash smaller loads to reduce imbalance.

Do not tightly pack. Avoid washing single items.

Use Deep Wash cycle for oversized, non-absorbent items such as

comforters or poly-lled jackets.

See “Cycle Guide” and “Using Your Washer” in this Use and

Care Guide.

Noises

Clicking or metallic noises Objects caught in washer drain

system.

Empty pockets before washing. Loose items such as coins could

fall between basket and tub or may block pump. It may be

necessary to call for service to remove items.

It is normal to hear metal items on clothing such as metal snaps,

buckles, or zippers touch against the basket.

Gurgling or humming Washer may be draining water. It is normal to hear the pump making a continuous humming

sound with periodic gurgling or surging as nal amounts of water

are removed during the Drain/Spin cycles.

Humming Load sensing may be occurring. You may hear the hum of the sensing spins after you have started

the washer. This is normal.

Water Leaks

Check the following for

proper installation:

Washer not level. Water may splash o basket if washer is not level.

Fill hoses not attached tightly. Tighten ll-hose connection.

Fill hose washers. Make sure all four ll hose at washers are properly seated.

Drain hose connection. Pull drain hose from washer cabinet and properly secure it to

drainpipe or laundry tub.

Check household plumbing for leaks

or clogged sink or drain.

Water can back up out of a clogged sink or drainpipe. Check

all household plumbing for leaks (laundry tubs, drain pipe, water

pipes, and faucets.)

Washer not loaded as recommended. Unbalanced loading can cause basket to be out of alignment

and cause water to splash o tub. See “Using Your Washer” for

loading instructions.

Washer not performing as expected

Not enough water in

washer

Load not completely covered in water. This is normal operation for an HE low-water washer. The load will

not be completely under water. The washer senses load sizes and

adds correct amount of water for optimal cleaning.

IMPORTANT: Do not add more water to washer. Adding water

lifts the items o the washplate, resulting in less eective cleaning.

Use Heavy Duty or Deep Wash cycle for higher water ll. See

“What’s New under the Lid” and “Cycle Guide” to match your

load with the best cycle.

Run Clean Washer cycle to optimize the water level and wash

performance due to soil build-up in washer basket.

First try the solutions suggested here

for assistance and to possibly avoid a service call.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

re, or electrical shock.

WARNING

TROUBLESHOOTING

Washer won’t run or ll,

washer stops working

or wash light remains

on (indicating that the

washer was unable to ll

appropriately) (cont.)

Check proper electrical supply. Plug power cord into a grounded 3 prong outlet.

Do not use an extension cord.

Ensure there is power to outlet.

Reset a tripped circuit breaker. Replace any blown fuses.

NOTE: If problems continue, contact an electrician.

Normal washer operation. Lid must be closed for washer to run.

Washer will pause during certain phases of cycle. Do not interrupt

cycle.

Washer may be tightly packed. Remove several items, rearrange load evenly in basket. Close lid

and press START/PAUSE/Unlock Lid.

Do not add more than 1 or 2 additional items after cycle has

started to avoid tightly packing or unbalancing.

Do not add more water to the washer.

Washer not draining/

spinning, loads are

still wet or spin light

remains on (indicating

that the washer was

unable to pump out

water within 10 minutes)

Small items may have been caught

in pump or between basket and tub,

which can slow draining.

Empty pockets and use garment bags for small items.

Use a cycle with a low spin speed. Cycles with lower spin speeds remove less water than cycles

with high spin speeds. Use the recommended cycle/speed spin

for your garment. To remove extra water in the load, select

Drain/Spin. Load may need to be rearranged to allow even

distribution of the load in the basket.

The washer may be tightly packed or

unbalanced.

Tightly packed or unbalanced loads may not allow the washer

to spin correctly, leaving the load wetter than normal. Evenly

arrange the wet load for balanced spinning. Select the Drain/

Spin cycle to remove excess water. See “Using Your Washer” for

loading recommendations.

If you experience Possible Causes Solution

Washer not performing as expected (cont.)

Washer won’t run or ll,

washer stops working

or wash light remains

on (indicating that the

washer was unable to ll

appropriately)

Check for proper water supply. Both hoses must be attached and have water owing to inlet

valve.

Both hot and cold water faucets must be turned on.

Check that inlet valve screens have not become clogged.

Check for any kinks in inlet hoses, which can restrict water ow.

First try the solutions suggested here

for assistance and to possibly avoid a service call.

TROUBLESHOOTING

If you experience Possible causes Solution

Washer not performing as expected (cont.)

Washer not draining/

spinning, loads are

still wet or spin light

remains on (indicating

that the washer was

unable to pump out

water within 10 minutes)

(cont.)

Check plumbing for correct drain hose

installation. Drain hose extends into

standpipe farther than 4.5" (114 mm).

Check drain hose for proper installation. Use drain hose form

and securely attach to drainpipe or tub. Do not tape over drain

opening. Lower drain hose if the end is higher than 96" (2.4 m)

above the oor. Remove any clogs from drain hose.

Too much detergent causing suds to

slow or stop draining and spinning.

Always measure and follow detergent directions for your load.

To remove extra suds, select Rinse/Spin. Do not add detergent.

Dry spots on load

after cycle

High speed spins extract more

moisture than your previous washer.

The high spin speeds combined with air ow during the nal spin

can cause items near the top of the load to develop dry spots

during the nal spin. This is normal.

Washer may be tightly packed. Use Heavy Duty or Deep Wash cycle for higher water ll. See

“Cycle Guide” to match your load with the best cycle.

Added extra garments to the load

after the sensing/ll phase.

Add only 1 or 2 additional garments after washer has started.

Incorrect or wrong

wash or rinse

temperatures

Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached to both washer and faucet, and

have both hot and cold water owing to inlet valve.

Check that inlet valve screens are not clogged.

Remove any kinks in hoses.

Energy saving controlled

wash temperatures.

ENERGY STAR

qualied washers use cooler wash and rinse water

temperatures than traditional top-load washers. This includes

cooler hot and warm washes.

Load not rinsed Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached and have water owing to the

inlet valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

Not using HE detergent or using too

much HE detergent.

The suds from too much detergent can keep washer from

operating correctly. Always measure detergent and follow

detergent directions based on load size and soil level.

Washer not loaded as recommended. The washer is less ecient at rinsing when load is tightly packed.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 additional garments after washer has started.

Use Heavy Duty or Deep Wash cycle for higher water ll. See

“Cycle Guide” to match your load with the best cycle.

Sand, pet hair, lint,

etc. on load after

washing

Heavy sand, pet hair, lint, and

detergent or bleach residues may

require additional rinsing.

Increase Soil Level setting.

Load is tangling Washer not loaded as recommended. See “Using Your Washer” section.

Select a cycle with a slower wash action and spin speed; however,

items will be wetter than those using a higher speed spin. Use

Heavy Duty or Deep Wash cycle for higher water ll. See the

“Cycle Guide” to match your load with the best cycle.

Load garments in loose heaps evenly around the basket wall.

Reduce tangling by mixing types of load items. Use the

recommended cycle for the type of garments being washed.

First try the solutions suggested here

for assistance and to possibly avoid a service call.

TROUBLESHOOTING

If you experience Possible Causes Solution

Washer not performing as expected (cont.)

Not cleaning or

removing stains

Added more water to washer. Washer senses load size and adds correct amount of water. This

is normal and necessary for clothes to move. It is normal for the

wash load to be not completely covered in water. Added water

lifts the laundry o the washplate, resulting in less eective

cleaning.

Washer not loaded as recommended. Washer is less ecient at cleaning when load is tightly packed.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Add only 1 or 2 additional garments after washer has started.

Adding detergent on top of load. Add detergent, oxi products, and color-safe bleach to the

bottom of the basket before adding the load items.

Not using HE detergent or using too

much HE detergent.

The suds from regular detergent can keep washer from operating

correctly.

Use only HE detergent. Be sure to measure correctly.

Always measure detergent and follow manufacturer’s directions

based on load size and soil level.

Not using correct cycle for fabric

type.

Use a higher soil level cycle option and warmer wash temp to

improve cleaning.

Use Heavy Duty cycle for tough cleaning. See the “Cycle Guide”

to match your load with the best cycle.

Not using dispensers. Use dispensers to avoid chlorine bleach and fabric softener

staining.

Load dispensers before starting a cycle.

Avoid overlling.

Do not add products directly onto load.

Not washing like colors together. Wash like colors together and remove promptly after the cycle is

complete to avoid dye transfer.

Incorrect dispenser

operation

Clogged dispenser. Load dispensers before starting a cycle.

Use only liquid chlorine bleach in the bleach dispenser. Use only

fabric softener in the fabric softener dispenser.

Fabric damage Sharp items were in pockets during

wash cycle.

Empty pockets, zip zippers, and snap or hook fasteners before

washing to avoid snags and tears.

Strings and straps could have tangled. Tie all strings and straps before starting wash load.

Items may have been damaged

before washing.

Mend rips and broken threads in seams before washing.

Fabric damage can occur if load is

tightly packed.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Use cycle designed for the fabrics being washed.

Use Heavy Duty or Deep Wash cycle for higher water ll. See

“What’s New under the Lid” and “Cycle Guide” to match your

load with the best cycle.

Add only 1 or 2 additional garments after washer has started.

Liquid chlorine bleach may have been

added incorrectly.

Do not pour liquid chlorine bleach directly onto load. Wipe up

bleach spills.

Undiluted bleach will damage fabrics. Do not use more than

recommended by manufacturer.

Do not place load items on top of bleach dispenser when loading

and unloading washer.

Garment care instructions may not

have been followed.

Always read and follow garment manufacturer’s care label

instructions. See the “Cycle Guide” to match your load with the

best cycle.

First try the solutions suggested here

for assistance and to possibly avoid a service call.

TROUBLESHOOTING

If you experience Possible Causes Solution

Washer not performing as expected (cont.)

Odors Monthly maintenance not done as

recommended.

See “Washer Care” in Washer Maintenance.

Unload washer as soon as cycle is complete.

Using too much detergent. Be sure to measure correctly. Always follow the manufacturer’s

directions.

See “Washer Care” section.

Lid locked light is

ashing

The lid is not closed. Close the lid. The washer will not start or ll with the lid open.

A cycle was stopped or paused using

the START/PAUSE/Unlock Lid button.

The washer may still be spinning. The lid will not unlock until the

basket has stopped spinning. This may take several minutes if

washing large loads or heavy fabrics.

Single-dose laundry

packet not dissolving

Adding laundry packet incorrectly. Be sure laundry packet is added to washer basket before adding

clothes. Do not add packet to dispenser. Follow the manufacturer’s

instructions to avoid damage to your garments.

Washer pumps out water

before nishing cycle

Lid is left open for more than

10 minutes.

Make sure lid is closed before starting a cycle and/or during

prewash (soak).

First try the solutions suggested here

for assistance and to possibly avoid a service call.

KENMORE APPLIANCE WARRANTY

PROTECTION AGREEMENTS

Master Protection Agreements

Congratulations on making a smart purchase. Your new Kenmore

product is designed and manufactured for years of dependable

operation.

But like all products, it may require preventive maintenance or

repair from time to time. That’s when having a Master Protection

Agreement can save you money and aggravation.

The Master Protection Agreement also helps extend the life

of your new product. Here’s what the Agreement* includes:

Parts and labor needed to help keep products operating properly

under normal use, not just defects. Our coverage goes well

beyond the product warranty. No deductibles, no functional

failure excluded from coverage—real protection.

Expert service by a force of more than 10,000 authorized Sears

service technicians, which means someone you can trust will be

working on your product.

Unlimited service calls and nationwide service, as often as you

want us, whenever you want us.

– replacement of your covered product if four or more product

failures occur within twelve months.

Product replacement if your covered product can’t be xed.

Annual Preventive Maintenance Check at your request –

no extra charge.

Fast help by phone – we call it Rapid Resolution – phone support

from a Sears representative on all products. Think of us as a

“talking owner’s manual.”

Power surge protection against electrical damage due

to power uctuations.

Rental reimbursement if repair of your covered product takes

longer than promised.

25% discount o the regular price of any non-covered repair

service and related installed parts.

Once you purchase the Agreement, a simple phone call is all

that it takes for you to schedule service. You can call anytime

day or night, or schedule a service appointment online.

The Master Protection Agreement is a risk free purchase. If you

cancel for any reason during the product warranty period, we

will provide a full refund. Or, a prorated refund anytime after the

product warranty period expires. Purchase your Master Protection

Agreement today! Some limitations and exclusions apply.

For prices and additional information in the U.S.A., call

1-800-827-6655. *Coverage in Canada varies on some items.

For full details, call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances, garage

door openers, water heaters, and other major home items,

in the U.S.A. or Canada, call 1-800-4-MY-HOME

KENMORE LIMITED WARRANTY

FOR ONE YEAR from the date of sale this appliance is warranted

against defects in material or workmanship when it is correctly

installed, operated, and maintained according to all supplied

instructions.

WITH PROOF OF SALE, a defective appliance will receive free

repair or replacement at option of seller.

For warranty coverage details to obtain free repair or

replacement, visit the web page: www.kenmore.com/warranty.

This warranty applies for only 90 DAYS from the sale date in the

United States, and is void in Canada, if this appliance is ever used

for other than private household purposes.

This warranty covers ONLY defects in material and

workmanship, and will NOT pay for:

1. Expendable items that can wear out from normal use, including

but not limited to lters, belts, bags, or screw-in base light

bulbs.

2. A service technician to clean or maintain this appliance, or to

instruct the user in correct appliance installation, operation, and

maintenance.

3. Service calls to correct appliance installation not performed

by Sears authorized service agents, or to repair problems with

house fuses, circuit breakers, house wiring, and plumbing or gas

supply systems resulting from such installation.

4. Damage to or failure of this appliance resulting from

installation not performed by Sears authorized service agents,

including installation that was not in accord with electrical, gas,

or plumbing codes.

5. Damage to or failure of this appliance, including discoloration

or surface rust, if it is not correctly operated and maintained

according to all supplied instructions.

6. Damage to or failure of this appliance, including discoloration

or surface rust, resulting from accident, alteration, abuse, misuse

or use for other than its intended purpose.

7. Damage to or failure of this appliance, including discoloration

or surface rust, caused by the use of detergents, cleaners,

chemicals, or utensils other than those recommended in all

instructions supplied with the product.

8. Damage to or failure of parts or systems resulting from

unauthorized modications made to this appliance.

9. Service to an appliance if the model and serial plate is missing,

altered, or cannot easily be determined to have the appropriate

certication logo.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION

OF REMEDIES

Customer’s sole and exclusive remedy under this limited warranty

shall be product repair or replacement as provided herein. Implied

warranties, including warranties of merchantability or tness

for a particular purpose, are limited to one year or the shortest

period allowed by law. Seller shall not be liable for incidental

or consequential damages. Some states and provinces do not

allow the exclusion or limitation of incidental or consequential

damages, or limitation on the duration of implied warranties of

merchantability or tness, so these exclusions or limitations may

not apply to you.

This warranty applies only while this appliance is used in the

United States or Canada*.

This warranty gives you specic legal rights, and you may also

have other rights which vary from state to state.

* In-home repair service is not available in all Canadian

geographical areas, nor will this warranty cover user or servicer

travel and transportation expenses if this product is located

in a remote area (as dened by Sears Canada Inc.) where an

authorized servicer is not available.

Sears Brands Management Corporation

Homan Estates, IL 60179

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2C3

10/2014

SEGURIDAD DE LA LAVADORA

SEGURIDAD DE LA LAVADORA .................................18

¿QUÉ HAY DE NUEVO DEBAJO DE LA TAPA? ......... 20

PANEL DE CONTROL Y CARACTERÍSTICAS ............. 21

GUÍA DE CICLOS .......................................................... 22

USO DE SU LAVADORA ..............................................24

MANTENIMIENTO DE LA LAVADORA ......................27

SOLUCIÓN DE PROBLEMAS .......................................30

CONTRATOS DE PROTECCIÓN .................................35

GARANTÍA .................................................................... 35

AYUDA O SERVICIO TÉCNICO ............ Contraportada

ÍNDICE

¿QUÉ HAY DE NUEVO DEBAJO DE LA TAPA?

Para obtener el mejor funcionamiento, se recomienda colocar

las prendas en montones ojos y de modo parejo alrededor

de la placa de lavado.

A medida que la lavadora moja y mueve la carga, las prendas

de acomodan en la canasta y el nivel de las mismas se asentará.

Esto es normal y no indica que se deban agregar más prendas.

IMPORTANTE:

■ No verá una canasta llena de agua como solía ver en su

lavadora anterior de estilo tradicional con agitador. Es normal

que parte de la carga quede por encima del nivel de agua.

■ La tapa debe cerrarse antes de que la canasta se llene con

agua y de que comience el ciclo de lavado. Si la tapa está

abierta y se detiene el llenado, cierre la tapa y presione el

botón START (Inicio) para concluir el ciclo.

Selección del detergente adecuado

Use solamente detergentes de alto rendimiento. El paquete

tendrá la indicación “HE” o “High Eciency” (Alto rendimiento).

El lavado con poca agua crea espuma en exceso con un

detergente regular que no sea HE. El uso de un detergente común

probablemente derive en tiempos de ciclo más prolongados

y menor rendimiento de enjuague. También puede ocasionar

fallas en los componentes y moho evidente. Los detergentes de

alto rendimiento (HE) están hechos para producir la cantidad

adecuada de espuma para el mejor rendimiento. Siga las

instrucciones del fabricante para determinar la cantidad de

detergente que debe utilizar y no se pase de la línea Max (Máx.)

del depósito. Consulte la sección “Cómo usar los depósitos para

productos de lavandería” para obtener más información.

Sonidos comunes que puede esperar

En diferentes etapas del ciclo de lavado, podrá escuchar

sonidos y ruidos que son diferentes a los de su lavadora anterior.

Por ejemplo, podrá escuchar un chasquido y un zumbido al

comienzo del ciclo, cuando el seguro de la tapa realiza una

autovericación. Se escucharán distintos tipos de zumbidos

mientras la placa de lavado mueve la carga y mientras la

canasta desacelera para detenerse. Algunas veces no escuchará

nada, ya que la lavadora determina el nivel de agua adecuado

para su carga y en remojo por un tiempo.

Use solamente un detergente de Alto rendimiento (HE).

Limpieza mejorada

Una limpieza con bajo nivel de agua signica una limpieza

concentrada. En lugar de diluir el detergente como lo hace

una lavadora con agitador, esta lavadora coloca el detergente

directamente sobre la suciedad. Este sistema de bajo nivel

de agua también permite que las prendas se muevan de una

manera más ecaz para quitar las manchas.

Limpieza con menos agua

La lavadora regula automáticamente el nivel del agua de

acuerdo al tamaño de la carga; no se necesita un selector de

nivel de agua.

Lavadora de estilo

tradicional con agitador

Lavadora con bajo

nivel de agua

Washplate

Detección automática del tamaño de la carga

Una vez que ponga en marcha el ciclo, la lavadora se llenará

hasta el nivel de agua. Cuando termine de llenarse, comenzará a

girar después de determinar el nivel adecuado de agua para la

carga.

Este método de lavado con bajo nivel de agua usa menos agua

y energía, en comparación con el estilo tradicional de lavadora

con agitador.

La mayor diferencia en su nueva lavadora es el sistema de lavado con placa de lavado y bajo nivel de agua.

La page charge ...

Kenmore 110.2233 series Manuel utilisateur

Marque: Kenmore

Modèle: 110.2233 series

Catégorie: Machines à laver

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Kenmore 110.2233 series User manual
español: Kenmore 110.2233 series Manual de usuario

Kenmore 110.2233 series Manuel utilisateur

Ce manuel convient également à

Kenmore 110.2233 series Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents