Dorel Home 5728872COM Assembly Manual

Taper
Assembly Manual
B345728872COM00
Do Not Return This Product!
Contact our customer service team for help rst
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Unit can p over causing severe injury or death.
–Anchor unit to stud in wall (if instructed to)
–Do not allow children climb on unit
–Put heavy items on lower shelves or drawers
Remington Storage Cabinet
5728872COM
Date of Purchase: ____/____/_____
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Easy Tough
Assembly Diculty Meter
Follow Ameriwood Home
042019PK
Helpful Hints
Contact Us!
Do NOT return this product!
Contact our friendly customer service team rst for help
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 30 MINUTES
Visit ameriwoodhome.com
Assembly Tips
2
ameriwoodhome.com
- Open your item in the area you plan to keep it for less heavy liing
- Idenfy, sort and count the parts before aempng assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (le) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture
Before You Start
Cam Lock Fastening System
3
ameriwoodhome.com
P
P
P
P
P
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cauon: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is ght.
Failure to do so may result in stripping the screw.
Q
u
i
c
k
T
i
p
A
s
s
e
m
b
l
y
1
3
2
4
Board Iden ca on
Not actual size
4
ameriwoodhome.com
x1
T5728872010PK
TOP PANEL
x1
T5728872020PK
BOTTOM PANEL
x1
T5728872030PK
LEFT SIDE PANEL
x1
T5728872040PK
RIGHT SIDE PANEL
x2
T5728872050PK
DOOR
x1
T5728872080PK
FRONT DRAWER
x1
T5728872090PK
LEFT SIDE DRAWER
x1
T5728872060PK
SHELF
x1
T5728872070PK
BRACE
1
5
8 9
6
7
2 3
4
Board Iden ca on
Not actual size
5
ameriwoodhome.com
x1
T5728872100PK
RIGHT SIDE DRAWER
x1
T5728872110PK
BACK DRAWER
x1
T5728872120PK
BOTTOM DRAWER
x1
T5728872130PK
DRAWER SUPPORT
x1
T5728872140PK
BACK PANEL
10
14
11 12
13
Part List
Actual Size
6
ameriwoodhome.com
x11
TPK0001
Cam Bolt
x11
TPK0003
Cam Lock 15-9
x10
TPK0004
DOWEL 8 X 30
x4
TPK0009
CBS 4 x 50
x16
TPK0010
SCREW PH 4 X 30
x20
TPK0015
NAIL
x4
TPK0006
SHELF HOLDER
x38
TPK0007
CBS 3.5 x 16
x5
TPK0008
CBS 4 x 38
x6
TPK3005
HANDLE SCREW
Part List
Not Actual Size
7
ameriwoodhome.com
x4
TPK2002
LEG BRACKET
x1
TPK2004
ANTI TIPPING KIT
x4
TPK2001
WOODEN LEG
x3
TPK3004
ACRYLIC HANDLE
x4
TPK4001
DOOR HINGES
x1
TPK1001
DRAWER SLIDE 300MM
8
ameriwoodhome.com
Proper orientation of CAM LOCK
Tip
Assembly
Quick
Step 1
4
Properly insert Cam Lock and dowel.
3
x4
TPK0003
x8
TPK0004
x2
TPK0001
9
ameriwoodhome.com
Step 2
4
3
Slide (CL), screw posion on panel number 3. Slide (CR), screw posion on panel number 4.
x1
TPK1001
x8
TPK0007
10
ameriwoodhome.com
Proper orientation of CAM LOCK
Tip
Assembly
Quick
Step 3
x2
TPK0003
x2
TPK0004
x4
TPK0001
x1
TPK2004
7
1
Aach An-Tipping kit as shown. Do not fully ghten yet in this step.
Properly insert Cam Lock
and dowel.
11
ameriwoodhome.com
Step 4
Aach panel 7 to panel 3 &4. Then
fully ghten the cam lock.
4
3
7
12
ameriwoodhome.com
4
1
3
Step 5
Next, aach panel 1 as shown. Make sure edge
with prole facing upwards. Then fully ghten the
cam lock.
13
ameriwoodhome.com
Step 6
2
x4
TPK0009
Next, aach panel 2 as shown. Make
sure edge with prole facing upwards.
Fix using screw as shown.
14
ameriwoodhome.com
Step 7
2
2
14
Before aach panel 14, make sure to turn the
carcass upside down. Be careful, the oor must
clean and spread with so cloth.
x20
TPK0015
Aach panel 14, this panel is part of
construcon stability. Please ensure corner to
corner in same dimension. Spread evenly the
iron nails.
15
ameriwoodhome.com
Step 8
2
1
x16
TPK0010
x4
TPK2002
To aach these plasc brackets, please be alert,
this bracket designed with slanng face. Please
carefully align the shorter edge to outside corner.
First, turn up the unit, with panel number 1 on
the oor.
Shorter edge
higher edge
IMPORTANT! Shorter edge
must align to outside corner.
16
ameriwoodhome.com
Step 9
x4
TPK2001
Please remove plasc cap on the leg rst. Carefully
align bolt to the bracket, turning the leg clockwise to
ghten the leg.
17
ameriwoodhome.com
Step 10
5
x2
x8
TPK0007
x4
TPK4001
Aach door hinges to the door panel. Align carefully
the hinges and make sure side faces parallel with
door edge. Fully ghten the screws.
18
ameriwoodhome.com
Step 11
5
5
Insert door to the side panel as shown below.
First, insert screw to the side panel.
To adjust outside level, turn this screw,
clockwise to move in, counter clockwise
to move out.
Loosen this screw to move door front or back, fully ghten
this screw aer nish make adjustment.
x16
TPK0007
19
ameriwoodhome.com
Step 12
This cabinet designed with 3 levels of
adjustment for shelf. Insert shelf holder
in desired level of holes.
x4
TPK0006
x4
TPK3005
x2
TPK3004
Aach handles as shown in illustraon.
20
ameriwoodhome.com
Step 13
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture pover.
To prevent pover:
* Install pover restraint provided
* place heaviest items in the lowest
drawers
* Unless specically designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a me
Use of pover restarints may only
reduce, but not eliminate the risk
of pover
hole
stud
wallboard
OPTION 1: Aachment into a wall stud (preferred method)
Using a stud nder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this locaon.
To make driving the screw easier, you can drill a 1/8” diameter pilot hole (3mm) through the safety
bracket into the stud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully
ghened in step 5.
OPTION 2: Aachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then
move your unit aside.
Drill a 3/16” diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole unl it is ush.
Move your unit into locaon and fasten the wall bracket to the wall anchor with the screw.
Tighten the screw that was not fully ghtened in step 5.
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
aach the safety bracket.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37

Dorel Home 5728872COM Assembly Manual

Taper
Assembly Manual

dans d''autres langues