Samsung WF361BVBEWR/A2 Guide d'installation

Washing Machine

user manual

Imagine the possibilities

Thank you for purchasing this Samsung product.

WF361*

WF363*

WF365*

WF364*

This manual is made with 100% recycled paper.

2_ features of your new washer

features of your new washer

1. Extra Large Capacity

Even bulky garments and blankets get super clean. The large capacity leaves enough room

for a more thorough, cleaner wash.

2. VRT™ (Vibration Reduction Technology)

This Samsung washer performs smoothly at top spin speeds, minimizing noise and vibration.

3. Direct Drive Inverter Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the

washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates

a higher spin speed of 1100 rpms for more effective, quiet operation. The washer also has

fewer moving parts, meaning fewer repairs.

4. Sanitize

When you select the NSF certified Sanitize cycle, the water heats to an extra high

temperature and removes 99.9% of certain bacteria typically found on clothing, bedding, or

towels. This certification is awarded by NSF International, an independent third-party testing

and certification organization. Please check the garment care label to avoid garment

damage. Only sanitizing cycles have been designed to meet the requirements of this protocol

for sanitization efficacy.

5. Pure Cycle

TM

Using the Pure Cycle drum cleaning process helps to keep your washing machine clean even

without any chemical detergent or bleach. Keep your drum cleansed and odourless with this

specialized cleaning program.

6. Child Lock

The Child Lock function ensures that curious little hands are kept out of your washing

machine.

This safety feature stops your children from playing with the operation of the washing

machine, and alerts you when it is activated.

7. Delay Start

Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of

using your washing machine especially when you have to go out.

NSF Protocol P172

Sanitization Performance of Residential and

Commercial, Family-Sized Clothes washers

features of your new washer _3

8.

Pedestal with Storage Drawers (Model No : WE357*)

An optional 15” pedestal is available to raise the washer for easier loading and unloading.

The pedestal also offers a built-in storage drawer that can hold a 100 oz. bottle of detergent.

9. Stacking (Model No : SK-3A1/XAA , SK-4A/XAA , SK-5A/XAA)

Samsung washers and dryers can be stacked to maximize usable space. An optional

stacking kit is available for purchase from your Samsung retailer.

4_ safety information

safety information

Congratulations on your new Samsung washer. This manual contains important

information on the installation, use, and care of your appliance. Please take time

to read this manual to take full advantage of your washer’s many benefits and

features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and

situations that may occur. It is your responsibility to use common sense, caution, and care when installing,

maintaining, and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury

or death.

To reduce the risk of fire, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

CAUTION

Hazards or unsafe practices that may result in minor personal injury or

property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

These warning signs are here to prevent injury to you and others.

Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

SAVE THESE INSTRUCTIONS

safety information _5

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your

appliance, follow basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked

in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive

substances as they give off vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the

washing or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless

specifically recommended in the user-maintenance instructions or in published user-

repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances

to the wash water. These substances give off vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system

that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If

the hot water system has not been used for such a period, before using a washer or

combination washer-dryer, turn on all hot water faucets and let the water flow from

each for several minutes. This will release any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

State of California Proposition 65 Warnings:

WARNING: This product contains chemicals known to the State of California to cause

cancer and reproductive toxicity.

WARNING

SAVE THESE INSTRUCTIONS

6_ safety information

safety information

CRITICAL INSTALLATION WARNINGS

Plug the power cord into an AC 120 V / 60 Hz / 15 A wall socket or higher and use the socket

for this appliance only. In addition, do not use an extension cord.

- Sharing a wall socket with other appliances, using a power strip, or using an extension chord

may result in electric shock or fire.

- Do not use an electric transformer. It may result in electric shock or fire.

- Ensure that the voltage, frequency, and amperage provided at the wall socket match the

power specifications of the product.

The installation of this appliance must be performed by a qualified technician or service

company.

- Failing to do so may result in electric shock, fire, an explosion, problems with the product, or

injury.

Remove all foreign substances such as dust or water from the power plug terminals and contact

points using a dry cloth on a regular basis.

- Unplug the power plug and clean it with a dry cloth.

- Failing to do so may result in electric shock or fire.

Plug the power plug into the wall socket in the right direction so that the cord runs towards the

floor.

- If you plug the power plug into the socket in the opposite direction, the electric wires within

the cable may be damaged and this may result in electric shock or fire.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

- This may result in electric shock, fire, an explosion, or problems with the product

- Never plug the power cord into a socket that is not grounded correctly and make sure that it

is in accordance with local and national codes.

Do not install this appliance near a heater or inflammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct

sunlight and water (rain drops).

Do not install this appliance in a location where gas may leak.

- This may result in electric shock or fire.

Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged

power cord or loose wall socket.

- This may result in electric shock or fire.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord, insert

the power cord between objects, or push the power cord into the space behind the appliance.

- This may result in electric shock or fire.

Do not pull the power cord when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failing to do so may result in electric shock or fire.

If the power plug or power cord is damaged, contact your nearest service center.

SAVE THESE INSTRUCTIONS

WARNING

safety information _7

INSTALLATION CAUTIONS

Position the appliance so that the power plug is easily accessible.

- Failing to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a level and hard floor that can support its weight.

- Failing to do so may result in abnormal vibrations, noise, or problems with the product.

Unplug the power plug when the appliance is not being used for long periods of time or during a

thunder/lightning storm.

- Failing to do so may result in electric shock or fire.

CRITICAL USAGE WARNINGS

If the appliance is flooded, cut the power immediately and contact your nearest service center.

If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug

immediately and contact your nearest service center.

- Failing to do so may result in electric shock or fire.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without

touching the power plug. Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or fire.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other flammable or explosive substances.

- This may result in electric shock, fire or an explosion.

Do not open the washer door by force while the washer is operating (high-temperature washing/

drying/spinning).

- Water flowing out of the washer may result in burns or cause the floor to be slippery.

This may result in injury.

- Opening the door by force may result in damage to the product or personal injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer

before using it.

Do not insert your hand under the washer.

- This may result in injury.

Do not touch the power plug with wet hands.

- This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

- Plugging the power plug into the wall socket again may cause a spark and result in electric

shock or fire.

Keep all packaging materials well out of the reach of children, as packaging materials can be

dangerous to children.

- If a child places a plastic bag over his or her head, the child may sufficate.

Do not let children or infirm persons use this washer unsupervised.

- Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

- This may result in injury.

Make sure the detergent drawer is closed before you put laundry into the washer or remove

laundry from the washer.

- If the detergent drawer is open, you could strike the drawer with your head and injure

yourself.

SAVE THESE INSTRUCTIONS

CAUTION

WARNING

8_ safety information

safety information

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.

- If you need to repair or reinstall the appliance, contact your nearest service center.

- Failing to do so may result in electric shock, fire, problems with the product, or injury.

If water has enters the appliance anywhere but the drum, unplug the power plug and contact

your nearest service center.

- Failing to do so may result in electric shock or fire.

When the water supply hose comes loose from the faucet and floods the appliance, unplug the

power plug.

- Failing to do so may result in electric shock or fire.

If any foreign substance enters the appliance, unplug the power plug and contact you nearest

service center.

- Failing to do so my result in electric shock or fire.

USAGE CAUTIONS

If the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc.,

unplug the power plug and clean the washer using a damp, soft cloth.

- Failing to do so may result in discoloration, deformation, damage or rust.

If struck hard, the front glass can break. Take care when using the washer.

- If the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the faucet slowly.

Open the faucet slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may result in damage to a part or

in water leakage.

If a drain error occurs during an operation, check if there is a drainage problem.

- If the washer is used when it is flooded because of a drainage problem, it may result in

electric shock or fire due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the door.

- If laundry gets caught in the door, it may result in damage to the laundry or the washer, or

result in water leakage.

Ensure that the faucet is turned off when the washer is not being used.

- Ensure that the fittings on the water supply hoses are firmly connected to the faucets and

properly tightened.

- Failing to do so may result in property damage or injury.

Take care that the Rubber Seal and the Front Door Glass are not contaminated by a foreign

substance (e.g. waste, thread, hair, etc.)

- If a foreign substance is caught in the door or the door is not completely closed, it may cause

water leakage.

Open the faucets and check if the water supply hose connectors are firmly tightened and that

there is no water leaking before using the product.

- If the water supply hose connectors are loose, it may result in water leakage.

The product you have purchased is designed for domestic use only.

The use for business purposes qualifies as product misuse. If used for business, the product

will not be covered by the standard warranty provided by Samsung and no responsibility can be

attributed to Samsung for malfunctions or damage resulting from such misuse.

SAVE THESE INSTRUCTIONS

CAUTION

safety information _9

If the wash is not started and the laundry is left for a period of time after you have added

detergent or applied stain remover or pre-treatment, the laundry may be discolored.

Select the recommended cycle and temperature on the basis of the laundry items, sort the

laundry by color on the basis of its colorfastness, and select the appropriate cycle.

Make sure that foreign objects such as pins, buttons, and coins are removed from clothing items

when adding laundry to the washer. Wash dirty laundry separately from relatively clean items and

wash fragile items separately from tougher textiles.

If an item is stained, wash it as soon as possible. Use stain remover or detergent only after

testing the colorfastness of the item by applying a small quantity to an inside seam.

Do not stand on top of the appliance or place objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, fire, problems with the product, or injury.

Do not operate the appliance with wet hands.

- This may result in electric shock.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also result in electric shock, fire, or problems with

the product.

Do not place an object that generates a electromagnetic field near the washer.

- This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the

water.

- This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats, or clothing (*).

- Do not wash thick, hard mats even if the washer mark is on the care label.

- This may result in injury or damage to the washer, walls, floor, or clothing due to abnormal

vibrations.

* Items not to wash: Woolen Bedding PLUS, rain covers, fishing vests, ski pants, sleeping

bags, diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent dispenser is open or removed.

- This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot.

- This may result in burns.

Do not insert your hand into the detergent dispenser after opening it.

- This may result in injury as your hand may be caught.

Do not place any non-laundry objects, such as shoes, food waste, or animals into the washer.

- This can cause abnormal vibrations that can damage the washer, and, in the case of pets,

cause severe injury or death.

Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.

- This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams, or lotions usually found in skincare shops or

massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

SAVE THESE INSTRUCTIONS

10_ safety information

safety information

Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods of

time.

- This may cause the tub to rust.

- If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface and

use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated

by dry cleaning detergent.

- This may result in spontaneous combustion or ignition due to the heat from the oxidation of

the oil.

Do not use hot water from water cooling/heating devices.

- This may result in problems with the washer.

Do not use natural hand-washing soap in the washer.

- If it hardens and accumulates inside the washer, it may result in problems with the product,

discoloration, rust, or bad odors.

Do not wash large laundry items such as Bedding PLUS in the washing net.

- Failing to do so may result in injury due to abnormal vibrations.

- Place smaller items, such as lace socks and lingerie in the washing net.

Do not use hardened detergent.

- If it accumulates inside the washer, it may result in water leakage.

Do not wash throw rugs or doormats.

- If you wash throw rugs or doormats, sand will accumulate inside the washer. The sand can

prevent the washer from draining properly.

Take care that children’s ﬁngers are not caught in the door when closing it. This may result in

injury.

CRITICAL CLEANING INSTRUCTIONS

Do not clean the appliance by spraying water directly onto it.

Do not use the strong acid cleaning agent.

Do not use benzene, thinner, or alcohol to clean the appliance.

- This may result in discoloration, deformation, damage, electric shock, or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failing to do so may result in electric shock or fire.

SAVE THESE INSTRUCTIONS

WARNING

contents _11

contents

SETTING UP YOUR WASHER

12

12 Checking the parts

13 Meeting installation requirements

13 Electrical supply

13 Grounding

13 Water

13 Drain facility

14 Flooring

14 Location considerations

14 Alcove or closet installation (washer only)

14 Undercounter installation (washer only)

15 With optional pedestal base or stacking kit

16 Installing your washer

16 Installation flow chart

WASHING A LOAD OF LAUNDRY

19

19 Loading your washer

19 Getting started

20 Overview of the control panel

22 Child Lock

23 Spin Only

23 Garment+

23 Using steam wash (WF363*, WF365*)

23 ATC (Auto Temperature Control)

24 Detergent use

24 Features

CLEANING AND MAINTAINING YOUR

WASHER

26

26 Cleaning the exterior

26 Cleaning the interior

26 Cleaning the dispensers

26 Storing your washer

27 Cleaning the debris filter

28 Cleaning the door seal/bellow

28 Preserving the top cover and the front frame

29 Pure cycle

tm

TROUBLESHOOTING AND

INFORMATION CODES

30

30 Check these solutions if your washer…

32 Information codes

APPENDIX

34

34 Fabric care chart

35 Helping the environment

35 Declaration of conformity

35 Specifications

36 Cycle chart

12_ setting up your washer

setting up your washer

CHECKING THE PARTS

Unpack your washer and inspect it for shipping damage. Make sure you have received all of the items

shown below. If your washer was damaged during shipping, or you do not have all of the items, contact

1-800-SAMSUNG (1-800-726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

Packing materials can be dangerous to children; Keep all packing material (plastic bags, polystyrene,

etc.) well out of childrens’ reach.

- If a child places a plastic bag over his or her head, the child may sufficate.

Parts supplied

Wrench Bolt hole covers Water supply hoses

Hose guide Manual book

Tools needed

Pliers Flat screwdriver

* Bolt hole covers : The number of bolt hole covers depends on the model (3~6 covers).

WARNING

Cold water supply hose

Hot water supply hose

Drain hose

Adjustable legs

Detergent drawer

Control panel

Door

Emergency

drain tube

Tub

Debris filter

Filter cover

Plug

Work top

setting up your washer _13

MEETING INSTALLATION REQUIREMENTS

Electrical supply

• 120 Volt 60 Hz 15 AMP fuse or circuit breaker

• Individual branch circuit serving only your washer is recommended.

• Your washer is equipped with a power cord.

Never use an extension cord.

Grounding

ELECTRICAL GROUNDING IS REQUIRED FOR THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a

properly installed and grounded outlet.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electrical

shock. Check with a qualified electrician or serviceman if you are not sure whether the

appliance is properly grounded. Do not modify the plug provided with the appliance. If it

does not fit the outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT SAFETY PRECAUTIONS

• To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and

grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.

70 Latest Revision and local codes and ordinances. It is the personal responsibility of the

appliance owner to provide adequate electrical service for this appliance.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Water

To correctly fill your washer in the proper amount of time, water pressure of 20-116 psi (137-

800 kPa) is required.

Water pressure less than 20 psi (137 kPa) may cause water valve failure, may not allow the water

valve to shut off completely, or may extend the fill time beyond what your washer controls allow,

resulting in your washer turning off. A time limit is built into the controls to prevent flooding if a

hose becomes loose.

The water faucets must be within 4 ft. (122 cm) of the back of your washer to match the inlet

hose provided with your washer.

Accessory inlet hoses are available in various lengths up to 10 ft. (305 cm) for faucets that

are further away from the back of your washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible.

• Turn off faucets when the washer is not in use.

• Periodically check that there is no leakage from the water inlet hose fittings.

Check all connections at the water valve and faucet for leaks.

Drain facility

If you use a standpipe, the recommended height of the standpipe is 18 in (46 cm). The drain hose

must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to

accept the outside diameter of the drain hose. The drain hose is attached the factory.

01 setting up your washer

CAUTION

WARNING

14_ setting up your washer

setting up your washer

Flooring

For best performance, your washer must be installed on a solidly constructed floor. Wood floors

may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting

and soft tile surfaces are contributing factors to vibration which can cause your washer to move

slightly during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location considerations

Do not install your washer in areas where water may freeze, since your washer will always retain

some water water in its water valve, pump, and hose areas. This can cause damage to the

pump, hoses and other components.

Alcove or closet installation (washer only)

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides - 1 In. (2.5 cm)

Rear - 5.9 In. (15 cm)

Top - 17 In. (43.2 cm)

Closet Front - 2 In. (5.1 cm)

If the washer and a dryer are installed together, the closet front must have at least a 72 in²

(465 cm²) unobstructed air opening. Your washer alone does not require a specific air opening.

A. Recessed area

B. Side view - closet or confined area

Undercounter installation (washer only)

CAUTION

1 in.

(2.5 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

39 in.

(99 cm)

1 in.

(2.5 cm)

1 in.

(2.5 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

27 in.

(68.6 cm)

A

2 in.

(5 cm)

5.9 in.

(15 cm)

31,1 in.

(80 cm)

17 in.

(43.2 cm)

B

setting up your washer _15

With optional pedestal base or stacking kit

Required Dimensions for Installation With Pedestal

Required Dimensions for Installation With Stacking Kit

* Required spacing

** External exhaust elbow requires additional space.

01 setting up your washer

1 in.

(2.5 cm)

27 in.

(68.6 cm)

76 in.

(193 cm)

6 in. *

(15.2 cm)

Closet or Door

48 in.² *

(310 cm²)

24 in.² *

(155 cm²)

3 in.

(7.6 cm)

3 in.

(7.6 cm)

1 in.

(2.5 cm)

31.1 in.

(80 cm)

5.9 in.**

(15 cm)

5 in.

(12.7 cm)

27 in.

(68.6 cm)

38 in.

(96.5 cm)

53 in.

(134.6 cm)

5.9 in.

(15 cm)

31.1 in.

(80 cm)

50.8 in. (129 cm) to clear open door

16_ setting up your washer

INSTALLING YOUR WASHER

Before STEP 5 is complete, do not plug the power cord into a wall socket.

Packaging materials can be dangerous to children; keep all packaging material (plastic bags,

polystyrene, etc.) well out of the reach of children.

Installation flow chart

Selecting a

location

Finish the

installation

Removing the shipping

bolts (*Drum only)

Connecting the water

and the drain

Adjusting the

levelling feet

Powering your washing

machine

[Running a test cycle]

Run a test cycle (Rinse+Spin) with

small amount of laundary

(about 4~5 Towels)

Yes

Please

check again

before

steps.

No

Does

your washer

have excess vibration

or noise?

STEP 1

Selecting a location

Before you install the washer, make sure the location:

• Hasahard,levelsurfacewithoutcarpetingorflooringthatmayobstructventilation.

• Hasnodust,oil,detergentetc.

• Isawayfromdirectsunlight.

• Hasadequateventilation.

• Willnothavetemperaturesatorbelow32˚For0˚C.

• Isawayfromheatsourcessuchasoilorgas.

• Hasenoughspacesothatthewasherdoesn’tstandonitspowercord.

STEP 2

Removing the Shipping Bolts

Before using your washer, you must remove all shipping

bolts from the back of the unit.

1. Loosen all the bolts with the supplied wrench.

2. Slide the bolt and spacer up and remove the bolt with

the spacer through the hole in the rear wall of your

washer. Repeat for each bolt.

3. Fill the holes with the supplied plastic covers.

4. Keep the shipping bolts and spacers for future use.

setting up your washer

WARNING

CAUTION

setting up your washer _17

STEP 3

Installing your washer

1. Place the drain hose in the drain facility (tub,

sink, or standpipe.) If you connect the drain

hose to a standpipe, be sure an airtight

connection is NOT made between the drain

hose and the standpipe. The standpipe

must be at least 18 inches or 46 cm high

and no higher than 96 inches.

You must always exercise caution to avoid

collapsing or damaging the drain hose.

For best results, the drain hose should

not be restricted in any way – by elbows,

couplings, or excessive length. For

situations where the drain hose cannot be

conveniently elevated to at least 18 in or

46 cm, the drain hose must be supported.

If drain hose is installed below 18”(46cm),

water can be drained in cycle working

cause of siphon phenomenon. It causes

the washer to “nF” error.

Drain Hose can be installed until 96”(245cm) maximum.

But drain capability can be reduced at this height. It

causes the washer to have odor, because of remained

water in the drain system.

Connection the hose guide within 6”(15cm) from the end

of the drain hose. If the drain hose is extended more

than 6”(15cm) beyond the end of the hose guide, mold or

microorganisms could spread to the inside of the washer.

2. Before connecting the inlet hoses to the water faucets,

make sure a washer is inside each coupling on both ends.

3. Thread the inlet hoses onto the HOT and COLD faucet

connections on the washer.

Attach the other end of each fill hose to a water valve. Make

sure the hose with Hot printed on it is attached to the HOT

faucet. Tighten by hand until snug, then tighten two-thirds of

a turn with pliers.

For correct water use, connect both HOT and COLD water

valves. If either or both are not connected, an “nF” (no fill)

error can occur.

1RPRUHWKDQ

ರFP

+RVH*XLGH

01 setting up your washer

96” Max

18” Min

96” Max

18” Min

Hose

retainer

Tie strap

Laundry tub Stand pipe

Rubber

washer

Coupling

Cold Hot

18_ setting up your washer

4. Turn on the HOT and COLD water supply and check all

connections at the water valve and the faucet for leaks.

5. Slide your washer into position.

6. Level your washer by turning the leveling legs in or out as

necessary by hand or by using the wrench included with your

washer.

When your washer is level, tighten the locking nuts using the

wrench or (-) flathead screwdriver.

7. Plug the power cord into a 3-prong, well grounded 120 volt

60 Hz approved electrical outlet protected by a 15-amp fuse

or comparable circuit breaker.

Your washer is grounded through the third prong of the power

cord when plugged into a three-prong grounded receptacle.

Your washer must be leveled on all four sides. Use a

carpenter’s level on all four corners of your washer to ensure

it’s level. It’s also a good idea to recheck the leveling after

the first dozen washes.

Avoid damage to the legs. Do not

move the washer unless the locking-

nuts are fastened to the bottom of the

washer.

Test run

Make sure that you install your washing machine correctly by running the Rinse+Spin cycle

after the installation is complete.

setting up your washer

Cold printed Hot printed

washing a load of laundry _19

washing a load of laundry

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY

INSTRUCTIONS before operating this appliance.

LOADING YOUR WASHER

• You can fill the tub with dry, unfolded clothes, but DO NOT OVERLOAD the tub.

• Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or

wrinkling of the load.

• Wash delicate items such as bras, hosiery, and other lingerie in the Delicates cycle with similar

lightweight items.

• When washing big bulky items or a few smaller items that don’t fill the tub completely – a rug, a pillow, stuffed

toys, or one or two sweaters, for example – add a few towels to improve tumbling and spin performance.

During the spin cycle, the washer may add water to redistribute any imbalance inside the drum.

• To ensure good cleaning results when washing heavily soiled loads, do not overload your washer.

• To add a forgotten item:

1. Press the Power button.

2. Press the Start/Pause Button.

3. Wait for the Door Lock light to go out (5 seconds).

4. Add the item, close the door, and press the Start/Pause Button.

After a 10-second pause, the cycle resumes.

To ensure thorough cleaning, add items within five minutes of starting the wash cycle.

GETTING STARTED

1. Load your washer.

2. Close the door.

3. Press the Power button.

4. Add detergent and additives to the dispenser (see pages 24~25).

5. Select the appropriate cycle and options for the load (see pages 20~21).

6. Press the Start/Pause Button.

7. The Wash Indicator light illuminates.

8. The estimated cycle time appears in the display.

The time may fluctuate to indicate the time remaining in the cycle better.

The actual time required for a cycle may differ from the estimated time in the display depending on the

water pressure, water temperature, detergent, and laundry.

9. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a

quick drain.

• When the cycle is complete, the Door Lock light goes out and “End” appears in the display.

• DO NOT attempt to open the door until the Door Lock light is off. To add a forgotten item, see the

“Loading your washer” section. (page 19)

• When you restart your washer after a pause, expect a delay of up to 15 seconds before the cycle

continues.

• Pressing Power cancels the cycle and stops your washer.

• The Wash, Rinse, and Spin indicator lights illuminate during those portions of the cycle.

Do not place anything on top of your washer while it is running.

02 washing a load of laundry

WARNING

20_ washing a load of laundry

OVERVIEW OF THE CONTROL PANEL

Cycle Selector

Select the appropriate cycle for the type of load.

This will determine the tumble pattern and spin speed for the cycle.

Normal - For most fabrics including cottons, linens, and normally soiled garments.

Heavy Duty - For sturdy, colorfast fabrics, and heavily soiled garments.

Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally soiled

garments.

To minimize wrinkling of laundry, select the Perm Press cycle.

Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to 150 °F to

eliminate bacteria.

washing a load of laundry

1

10

2

11

2 7

3

9

1

6 8

5

4

12

La page charge ...

Samsung WF361BVBEWR/A2 Guide d'installation

Ce manuel convient également à

Samsung WF361BVBEWR/A2 Guide d'installation

dans d''autres langues

Documents connexes