AEG S80400KG Manuel utilisateur

Marque: AEG

Modèle: S80400KG

Catégorie: Congélateurs

Taper: Manuel utilisateur

S60360KG1

S80360KG

S80400KG

EN User manual 2

FR Notice d'utilisation 17

CONTENTS

1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3. FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. WHAT TO DO IF… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8. TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

9. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler –

features you might not find on ordinary appliances. Please spend a few minutes reading to get

the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com

SAFETY INSTRUCTIONS

In the interest of your safety and to en-

sure the correct use, before installing

and first using the appliance, read this

user manual carefully, including its hints

and warnings. To avoid unnecessary mis-

takes and accidents, it is important to

ensure that all people using the appli-

ance are thoroughly familiar with its op-

eration and safety features. Save these

instructions and make sure that they re-

main with the appliance if it is moved or

sold, so that everyone using it through

its life will be properly informed on ap-

pliance use and safety.

For the safety of life and property keep

the precautions of these user's instruc-

tions as the manufacturer is not respon-

sible for damages caused by omission.

1.1 Children and vulnerable

people safety

• This appliance is not intended for use

by persons (including children) with re-

duced physical, sensory or mental ca-

pabilities, or lack of experience and

knowledge, unless they have been giv-

en supervision or instruction concern-

ing use of the appliance by a person

responsible for their safety.

Children should be supervised to en-

sure that they do not play with the ap-

pliance.

• Keep all packaging well away from

children. There is risk of suffocation.

• If you are discarding the appliance

pull the plug out of the socket, cut the

connection cable (as close to the ap-

pliance as you can) and remove the

door to prevent playing children to

suffer electric shock or to close them-

selves into it.

• If this appliance featuring magnetic

door seals is to replace an older appli-

ance having a spring lock (latch) on

the door or lid, be sure to make that

spring lock unusable before you dis-

card the old appliance. This will pre-

vent it from becoming a death trap for

a child.

1.2 General safety

WARNING!

Keep ventilation openings, in the appli-

ance enclosure or in the built-in struc-

ture, clear of obstruction.

• The appliance is intended for keeping

foodstuff and/or beverages in a nor-

mal household and similar applica-

tions such as:

– staff kitchen areas in shops, offices

and other working environments;

– farm houses and by clients in hotels,

motels and other residential type

environments;

– bed and breakfast type environ-

ments;

– catering and similar non-retail appli-

cations.

• Do not use a mechanical device or any

artificial means to speed up the thaw-

ing process.

• Do not use other electrical appliances

(such as ice cream makers) inside of

refrigerating appliances, unless they

are approved for this purpose by the

manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is

contained within the refrigerant circuit

of the appliance, a natural gas with a

high level of environmental compati-

bility, which is nevertheless flammable.

During transportation and installation

of the appliance, be certain that none

of the components of the refrigerant

circuit become damaged.

If the refrigerant circuit should be-

come damaged:

– avoid open flames and sources of

ignition

– thoroughly ventilate the room in

which the appliance is situated

• It is dangerous to alter the specifica-

tions or modify this product in any

way. Any damage to the cord may

cause a short-circuit, fire and/or elec-

tric shock.

ENGLISH 3

WARNING!

Any electrical component (power

cord, plug, compressor) must be

replaced by a certified service

agent or qualified service per-

sonnel to avoid hazard.

Power cord must not be length-

ened.

Make sure that the power plug is

not squashed or damaged by the

back of the appliance. A squashed

or damaged power plug may

overheat and cause a fire.

Make sure that you can come to

the mains plug of the appliance.

Do not pull the mains cable.

If the power plug socket is loose,

do not insert the power plug.

There is a risk of electric shock or

fire.

You must not operate the appli-

ance without the lamp cover (if

foreseen) of interior lighting.

• This appliance is heavy. Care should

be taken when moving it.

• Do not remove nor touch items from

the freezer compartment if your hands

are damp/wet, as this could cause skin

abrasions or frost/freezer burns.

• Avoid prolonged exposure of the ap-

pliance to direct sunlight.

• Bulb lamps (if foreseen) used in this

appliance are special purpose lamps

selected for household appliances use

only. They are not suitable for house-

hold room illumination.

1.3 Daily Use

• Do not put hot pot on the plastic parts

in the appliance.

• Do not store flammable gas and liquid

in the appliance, because they may

explode.

• Do not place food products directly

against the air outlet on the rear wall.

(If the appliance is Frost Free)

• Frozen food must not be re-frozen

once it has been thawed out.

• Store pre-packed frozen food in ac-

cordance with the frozen food manu-

facturer's instructions.

• Appliance's manufacturers storage

recommendations should be strictly

adhered to. Refer to relevant instruc-

tions.

• Do not place carbonated or fizzy

drinks in the freezer compartment as it

creates pressure on the container,

which may cause it to explode, result-

ing in damage to the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

1.4 Care and cleaning

• Before maintenance, switch off the ap-

pliance and disconnect the mains plug

from the mains socket.

• Do not clean the appliance with metal

objects.

• Do not use sharp objects to remove

frost from the appliance. Use a plastic

scraper.

• Regularly examine the drain in the re-

frigerator for defrosted water. If neces-

sary, clean the drain. If the drain is

blocked, water will collect in the bot-

tom of the appliance.

1.5 Installation

For electrical connection careful-

ly follow the instructions given in

specific paragraphs.

• Unpack the appliance and check if

there are damages on it. Do not con-

nect the appliance if it is damaged.

Report possible damages immediately

to the place you bought it. In that case

retain packing.

• It is advisable to wait at least four

hours before connecting the appli-

ance to allow the oil to flow back in

the compressor.

• Adequate air circulation should be

around the appliance, lacking this

leads to overheating. To achieve suffi-

cient ventilation follow the instructions

relevant to installation.

• Wherever possible the back of the

product should be against a wall to

avoid touching or catching warm parts

(compressor, condenser) to prevent

possible burn.

www.aeg.com

• The appliance must not be located

close to radiators or cookers.

• Make sure that the mains plug is ac-

cessible after the installation of the ap-

pliance.

• Connect to potable water supply only

(If a water connection is foreseen).

1.6 Service

• Any electrical work required to do the

servicing of the appliance should be

carried out by a qualified electrician or

competent person.

• This product must be serviced by an

authorized Service Centre, and only

genuine spare parts must be used.

1.7 Environment Protection

This appliance does not contain

gasses which could damage the

ozone layer, in either its refriger-

ant circuit or insulation materials.

The appliance shall not be dis-

carded together with the urban

refuse and rubbish. The insula-

tion foam contains flammable

gases: the appliance shall be dis-

posed according to the applica-

ble regulations to obtain from

your local authorities. Avoid

damaging the cooling unit, espe-

cially at the rear near the heat ex-

changer. The materials used on

this appliance marked by the

symbol

are recyclable.

2. CONTROL PANEL

65 7 84321 15141312119 10

ON/OFF switch

Fridge temperature regulator, + but-

ton

Fridge temperature indicator

Fridge temperature regulator, - but-

ton

COOLMATIC button

COOLMATIC indicator

Fridge compartment indicator

Freezer compartment indicator

FROSTMATIC indicator

FROSTMATIC button

Freezer temperature regulator, +

button

Freezer temperature indicator

Freezer temperature regulator, -

button

Alarm reset button

Alarm indicator

2.1 Switching on

Insert the plug into the mains sock-

et.

Set ON/OFF switch to ON.

The alarm indicator light flashes

since the temperature is reached.

The acoustic alarm sounds.

Press the alarm reset button to reset

the alarm.

ENGLISH 5

2.2 Switching off

To switch the entire appliance off:

Set ON/OFF switch to OFF.

Disconnect the mains plug from the

mains socket.

2.3 Temperature regulation

The set temperature of the fridge and of

the freezer may be adjusted by pressing

the temperature regulator button. The

temperature indicators show the set

temperature.

For a correct storage of the food the fol-

lowing temperatures should be set:

• +5 °C in the fridge

• -18 °C in the freezer.

The set temperature will be reached

within 24 hours.

Fluctuations of some degrees around set

temperature are normal and does not

mean any fault in the appliance.

2.4 COOLMATIC function

The COOLMATIC function is suited for

quick cooling of large quantities of

goods in the refrigerator.

To activate the function, do these steps:

Press the COOLMATIC button.

The COOLMATIC indicator switches

on.

The COOLMATIC function now provides

for intensive cooling. A temperature of

+2°C is automatically selected.

The COOLMATIC function is ended au-

tomatically after a period of 6 hours.

You can deactivate the function at any

time:

Press the COOLMATIC button.

The COOLMATIC indicator switches

off.

2.5 Holiday function

This function allows you to keep the re-

frigerator shut and empty during a long

holiday period (e.g. the summer holi-

days) without the formation of a bad

smell.

The fridge compartment must be

empty when the holiday function

is on.

To activate the function:

press continuously the temperature

regulator (+ button) until the letter

"H" (Holiday) appears on the tem-

perature indicator. The Holiday func-

tion sets the temperature approx

+15°C. The refrigerator is in the en-

ergy-saving mode.

To deactivate the function:

set the required temperature by

pressing the fridge temperature reg-

ulator.

2.6 FROSTMATIC function

The FROSTMATIC function accelerates

the freezing of fresh food and, at the

same time, protects foodstuffs already

stored from undesirable warming.

To activate the function, do these steps:

Press the FROSTMATIC button.

The FROSTMATIC indicator switches

on.

The FROSTMATIC function is ended au-

tomatically after a period of 52 hours.

You can deactivate the function at any

time:

Press the FROSTMATIC button.

The FROSTMATIC indicator switches

off.

2.7 High temperature alarm

In the event of an abnormal temperature

rise inside the freezer (e.g. power cut)

alarm indicator light will start to flash

and a buzzer will sound.

Push the alarm reset button to stop the

buzzer sound, while the alarm indicator

light will continue to flash.

The buzzer will stop automatically when

the temperature has returned to normal

while the alarm indicator light will contin-

ue to flash.

Press the alarm reset button. The alarm

indicator light goes out and at the same

time the freezer temperature indicator

show for about 5 seconds the warmest

temperature reached in the freezer com-

partment.

www.aeg.com

3. FIRST USE

3.1 Cleaning the interior

Before using the appliance for the first

time, wash the interior and all internal

accessories with lukewarm water and

some neutral soap so as to remove the

typical smell of a brand-new product,

then dry thoroughly.

Do not use detergents or abra-

sive powders, as these will dam-

age the finish.

4. DAILY USE

4.1 Storage of frozen food

When first starting-up or after a period

out of use, before putting the products

in the compartment let the appliance run

at least 2 hours on the higher settings.

In the event of accidental de-

frosting, for example due to a

power failure, if the power has

been off for longer than the val-

ue shown in the technical charac-

teristics chart under "rising

time", the defrosted food must

be consumed quickly or cooked

immediately and then re-frozen

(after cooling).

4.2 Thawing

Deep-frozen or frozen food, prior to be-

ing used, can be thawed in the refrigera-

tor compartment or at room tempera-

ture, depending on the time available

for this operation.

Small pieces may even be cooked still

frozen, directly from the freezer: in this

case, cooking will take longer.

4.3 Movable shelves

The walls of the refrigerator are equip-

ped with a series of runners so that the

shelves can be positioned as desired.

4.4 Bottle rack

Place the bottles (with the opening fac-

ing front) in the pre-positioned shelf.

If the shelf is positioned horizon-

tally, place only closed bottles.

This bottle rack can be tilted in order to

store previously opened bottles. To ob-

tain this result, pull the shelf up so it can

rotate upwards and be placed on the

next higher level.

4.5 MAXIBOX drawer

The drawer is suitable for storing fruits

and vegetables.

4.6 Positioning the door

shelves

To permit storage of food packages of

various sizes, the door shelves can be

placed at different heights.

To make these adjustments proceed as

follows:

ENGLISH 7

gradually pull the shelf in the direction of

the arrows until it comes free, then repo-

sition as required.

4.7 Removal of freezing

baskets from the freezer

The freezing baskets have a limit stop to

prevent their accidental removal or fall-

ing out. At the time of its removal from

the freezer, pull the basket towards your-

self and, upon reaching the end point,

remove the basket by tilting its front up-

wards.

At the time of putting it back, slightly lift

the front of the basket to insert it into

the freezer. Once you are over the end

points, push the baskets back in their

position.

5. HELPFUL HINTS AND TIPS

5.1 Normal Operating Sounds

• You may hear a faint gurgling and a

bubbling sound when the refrigerant

is pumped through the coils or tubing.

This is correct.

• When the compressor is on, the refrig-

erant is being pumped around and

you will hear a whirring sound and a

pulsating noise from the compressor.

This is correct.

• The thermic dilatation might cause a

sudden cracking noise. It is natural,

not dangerous physical phenomenon.

This is correct.

5.2 Hints for energy saving

• Do not open the door frequently or

leave it open longer than absolutely

necessary.

• If the ambient temperature is high and

the Temperature Regulator is set to

low temperature and the appliance is

fully loaded, the compressor may run

continuously, causing frost or ice on

the evaporator. If this happens, set the

Temperature Regulator toward warm-

er settings to allow automatic defrost-

ing and so a saving in electricity con-

sumption.

5.3 Hints for fresh food

refrigeration

To obtain the best performance:

• do not store warm food or evaporat-

ing liquids in the refrigerator

• do cover or wrap the food, particularly

if it has a strong flavour

• position food so that air can circulate

freely around it

5.4 Hints for refrigeration

Useful hints:

Meat (all types) : wrap in polythene bags

and place on the glass shelf above the

vegetable drawer.

For safety, store in this way only one or

two days at the most.

Cooked foods, cold dishes, etc.: these

should be covered and may be placed

on any shelf.

www.aeg.com

Fruits and vegetables: these should be

thoroughly cleaned and placed in the

special drawer(s) provided. When in con-

tact, lemon juice can discolor the plastic

parts of your fridge. It is therefore rec-

ommended to keep citruses in separate

containers.

Butter and cheese: these should be

placed in special airtight containers or

wrapped in aluminium foil or polythene

bags to exclude as much air as possible.

Bottles: these should have a cap and

should be stored in the bottle rack on

the door.

Bananas, potatoes, onions and garlic, if

not packed, must not be kept in the re-

frigerator.

5.5 Hints for freezing

To help you make the most of the freez-

ing process, here are some important

hints:

• the maximum quantity of food which

can be frozen in 24 hrs. is shown on

the rating plate;

• the freezing process takes 24 hours.

No further food to be frozen should

be added during this period;

• only freeze top quality, fresh and thor-

oughly cleaned, foodstuffs;

• prepare food in small portions to ena-

ble it to be rapidly and completely fro-

zen and to make it possible subse-

quently to thaw only the quantity re-

quired;

• wrap up the food in aluminium foil or

polythene and make sure that the

packages are airtight;

• do not allow fresh, unfrozen food to

touch food which is already frozen,

thus avoiding a rise in temperature of

the latter;

• lean foods store better and longer

than fatty ones; salt reduces the stor-

age life of food;

• water ices, if consumed immediately

after removal from the freezer com-

partment, can possibly cause the skin

to be freeze burnt;

• it is advisable to show the freezing in

date on each individual pack to enable

you to keep tab of the storage time.

5.6 Hints for storage of frozen

food

To obtain the best performance from

this appliance, you should:

• make sure that the commercially fro-

zen foodstuffs were adequately stored

by the retailer;

• be sure that frozen foodstuffs are

transferred from the foodstore to the

freezer in the shortest possible time;

• not open the door frequently or leave

it open longer than absolutely neces-

sary;

• once defrosted, food deteriorates rap-

idly and cannot be refrozen;

• do not exceed the storage period in-

dicated by the food manufacturer.

6. CARE AND CLEANING

CAUTION!

Unplug the appliance before car-

rying out any maintenance oper-

ation.

This appliance contains hydrocar-

bons in its cooling unit; mainte-

nance and recharging must

therefore only be carried out by

authorized technicians.

6.1 Periodic cleaning

The equipment has to be cleaned regu-

larly:

• clean the inside and accessories with

lukewarm water and some neutral

soap.

• regularly check the door seals and

wipe clean to ensure they are clean

and free from debris.

• rinse and dry thoroughly.

ENGLISH 9

Do not pull, move or damage

any pipes and/or cables inside

the cabinet.

Never use detergents, abrasive

powders, highly perfumed clean-

ing products or wax polishes to

clean the interior as this will dam-

age the surface and leave a

strong odour.

Clean the condenser (black grill) and the

compressor at the back of the appliance

with a brush. This operation will improve

the performance of the appliance and

save electricity consumption.

Take care of not to damage the

cooling system.

Many proprietary kitchen surface clean-

ers contain chemicals that can attack/

damage the plastics used in this appli-

ance. For this reason it is recommended

that the outer casing of this appliance is

only cleaned with warm water with a little

washing-up liquid added.

After cleaning, reconnect the equipment

to the mains supply.

6.2 Defrosting of the

refrigerator

Frost is automatically eliminated from

the evaporator of the refrigerator com-

partment every time the motor compres-

sor stops, during normal use. The de-

frost water drains out through a trough

into a special container at the back of

the appliance, over the motor compres-

sor, where it evaporates.

It is important to periodically clean the

defrost water drain hole in the middle of

the refrigerator compartment channel to

prevent the water overflowing and drip-

ping onto the food inside. Use the spe-

cial cleaner provided, which you will find

already inserted into the drain hole.

6.3 Defrosting the freezer

A certain amount of frost will always form

on the freezer shelves and around the

top compartment.

Defrost the freezer when the frost layer

reaches a thickness of about 3-5 mm.

To remove the frost, follow the instruc-

tions below:

• Pull out the plug from the wall socket

or switch off the appliance.

• Remove any stored food, wrap it in

several layers of newspaper and put it

in a cool place.

• Remove the freezer drawers.

• Put insulating material around the

drawers, e.g. blankets or newspapers.

Defrosting can be accelerated by plac-

ing bowls with hot water (not boiling) in-

side the freezer.

• Loosen the drainage channel from its

resting position, push it in according

to the illustration and place it in the

bottom freezer drawer where water

can collect

• Carefully scrape off the ice when it

starts to thaw. Use a wood or a plastic

scraper.

• When all the ice has melted, clean and

wipe the cabinet dry, then put the

drainage channel back in place.

• Switch on the cabinet and replace the

frozen foodstuff.

It is recommended to operate the ap-

pliance at the highest position of the

thermostatic control for some hours

so that it can reach the sufficient stor-

ing temperature as soon as possible.

Never use sharp metal tools to

scrape off frost from the evapo-

rator as you could damage it. Do

not use a mechanical device or

any artificial means to speed up

the thawing process other than

those recommended by the

manufacturer. A temperature rise

of the frozen food packs, during

defrosting, may shorten their

safe storage life.

www.aeg.com

7. WHAT TO DO IF…

CAUTION!

Before troubleshooting, discon-

nect the power supply.

Only a qualified electrician or

competent person must do the

troubleshooting that is not in this

manual.

There are some sounds during

normal use (compressor, refriger-

ant circulation).

Problem Possible cause Solution

The appliance is

noisy.

The appliance is not sup-

ported properly.

Check if the appliance

stands stable (all the four

feet should be on the

floor).

The compressor op-

erates continually.

The Temperature regula-

tor may be set incorrectly.

Set a warmer temperature.

The door is not closed

correctly.

Refer to "Closing the

door".

The door has been

opened too frequently.

Do not keep the door

open longer than necessa-

ry.

The product temperature

is too high.

Let the product tempera-

ture decrease to room

temperature before stor-

age.

The room temperature is

too high.

Decrease the room tem-

perature.

The FROSTMATIC func-

tion is switched on.

Refer to "FROSTMATIC

function".

The COOLMATIC func-

tion is switched on.

Refer to "COOLMATIC

function".

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Products prevent that wa-

ter flows into the water

collector.

Make sure that products

do not touch the rear

plate.

Water flows on the

ground.

The melting water outlet

does not flow in the evap-

orative tray above the

compressor.

Attach the melting water

outlet to the evaporative

tray.

There is too much

frost and ice.

Products are not wrapped

properly.

Wrap the products better.

The door is not closed

correctly.

Refer to "Closing the

door".

ENGLISH 11

Problem Possible cause Solution

The Temperature regula-

tor may be set incorrectly.

Set a higher temperature.

The temperature in

the appliance is too

high.

The door is not closed

correctly.

Refer to "Closing the

door".

The product temperature

is too high.

Let the product tempera-

ture decrease to room

temperature before stor-

age.

Many products are stored

at the same time.

Store less products at the

same time.

The temperature in

the refrigeration is

too high.

There is no cold air circu-

lation in the appliance.

Make sure that there is

cold air circulation in the

appliance.

The temperature in

the freezer is too

high.

Products are too near to

each other.

Store products so that

there is cold air circulation.

The appliance does

not operate.

The appliance is switched

off.

Switch on the appliance.

The mains plug is not

connected to the mains

socket correctly.

Connect the mains plug to

the mains socket correctly.

The appliance has no

power. There is no volt-

age in the mains socket.

Connect a different electri-

cal appliance to the mains

socket. Contact a qualified

electrician.

The lamp does not

work.

The lamp is in stand-by. Close and open the door.

As much as the advice does not lead to result, call the nearest brand-mark service.

7.1 Replacing the lamp

Disconnect the appliance.

Push the movable part to unhook

the lamp cover (1).

Remove the lamp cover (2).

Replace the lamp with one of the

same power and specifically de-

signed for domestic appliances only.

Install the lamp cover.

Connect the appliance.

Open the door. Make sure that the

lamp comes on.

7.2 Closing the door

Clean the door gaskets.

If necessary, adjust the door. Refer

to "Installation".

If necessary, replace the defective

door gaskets. Contact the Service

Center.

www.aeg.com

8. TECHNICAL DATA

S60360KG1 S80360KG S80400KG

Dimension

Height 1850 mm 1850 mm 2010 mm

Width 595 mm 595 mm 595 mm

Depth 658 mm 658 mm 658 mm

Rising Time 20 h 20 h 20 h

Voltage 230 - 240 V 230 - 240 V 230 - 240 V

Frequency 50 Hz 50 Hz 50 Hz

The technical information are situated in

the rating plate on the internal left side

of the appliance and in the energy label.

9. INSTALLATION

WARNING!

Read the "Safety Information"

carefully for your safety and cor-

rect operation of the appliance

before installing the appliance.

9.1 Positioning

Install this appliance at a location where

the ambient temperature corresponds to

the climate class indicated on the rating

plate of the appliance:

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

9.2 Location

min

100

The appliance should be installed well

away from sources of heat such as radia-

tors, boilers, direct sunlight etc. Ensure

that air can circulate freely around the

back of the cabinet. To ensure best per-

formance, if the appliance is positioned

below an overhanging wall unit, the min-

imum distance between the top of the

cabinet and the wall unit must be at least

100 mm . Ideally, however, the appliance

should not be positioned below over-

hanging wall units. Accurate levelling is

ensured by one or more adjustable feet

at the base of the cabinet.

ENGLISH 13

WARNING!

It must be possible to disconnect

the appliance from the mains

power supply; the plug must

therefore be easily accessible af-

ter installation.

9.3 Electrical connection

Before plugging in, ensure that the volt-

age and frequency shown on the rating

plate correspond to your domestic pow-

er supply.

The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the do-

mestic power supply socket is not earth-

ed, connect the appliance to a separate

earth in compliance with current regula-

tions, consulting a qualified electrician.

The manufacturer declines all responsi-

bility if the above safety precautions are

not observed.

This appliance complies with the E.E.C.

Directives.

9.4 Rear spacers

You can find the two spacers in the bag

with documentation.

Do these steps to install the spacers:

Release the screw.

Engage the spacer below the screw.

Turn the spacer to the right position.

Tighten again the screws.

9.5 Levelling

When placing the appliance ensure that

it stands level. This can be achieved by

two adjustable feet at the bottom in

front.

9.6 Removing the shelf

holders

Your appliance is equipped with shelf re-

tainers that make it possible to secure

the shelves during transportation.

To remove them proceed as follows:

Move the shelf holders in the direc-

tion of the arrow (A).

Raise the shelf from the rear and

push it forward until it is freed (B).

Remove the retainers (C).

9.7 Door reversibility

WARNING!

Before carrying out any opera-

tions, remove the plug from the

power socket.

www.aeg.com

To carry out the following opera-

tions, we suggest that this be

made with another person that

will keep a firm hold on the

doors of the appliance during

the operations.

Open the doors. Unscrew the mid-

dle hinge (m2). Remove the plastic

spacer (m1).

Remove the spacer (m6) and move

to the other side of the hinge pivot

(m5).

Remove the doors.

Remove the left-hand cover pin of

the middle hinge (m3,m4) and move

to the other side.

Fit the pin of the middle hinge (m5)

into the left-hand hole of the lower

door.

Remove using a tool the cover (b1).

Unscrew the lower hinge pivot (b2)

and the spacer (b3) and place them

on the opposite side.

Re-insert the cover (b1) on the oppo-

site side.

Remove the plugs (t1) on the upper

side of both doors and move them

to the other side.

Re-insert the lower door on the low-

er hinge pivot (b2).

10.

Insert the middle hinge (m2) into the

left drill of the lower door.

11.

Unscrew the upper hinge pivot (t1)

and place it on the opposite side.

12.

Fit the upper door on the upper

door pivot.

13.

Re-insert the upper door on the mid-

dle hinge pivot (m5) slightly tilting

both doors.

14.

Re-screw the middle hinge (m2). Do

not forget the plastic spacer (m1).

15.

Remove the cover pins (h1). Remove

the cover (h2).

ENGLISH 15

16.

Unscrew the handles (h3) and fix

them on the opposite side.

17.

Re-insert the cover (h2) and the cov-

er pins (h1).

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the cab-

inet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly

to the cabinet. In that case, wait for the

natural fitting of the gasket.

In case you do not want to carry out the

above mentioned operations, contact

the nearest After Sales Service Force.

The After Sales Service specialist will car-

ry out the reversibility of the doors at

your cost.

10. ENVIRONMENT CONCERNS

Recycle the materials with the

symbol

. Put the packaging in

applicable containers to recycle it.

Help protect the environment and

human health and to recycle waste

of electrical and electronic

appliances. Do not dispose

appliances marked with the symbol

with the household waste. Return the

product to your local recycling

facility or contact your municipal

office.

www.aeg.com

SOMMAIRE

1. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2. BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3. PREMIÈRE UTILISATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4. UTILISATION QUOTIDIENNE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5. CONSEILS UTILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6. ENTRETIEN ET NETTOYAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

7. EN CAS D'ANOMALIE DE FONCTIONNEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

8. CARACTÉRISTIQUES TECHNIQUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

9. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

POUR DES RÉSULTATS PARFAITS

Merci d'avoir choisi ce produit AEG. Nous l'avons conçu pour qu'il vous offre des

performances irréprochables pour longtemps, en intégrant des technologies innovantes qui

vous simplifient la vie grâce à des caractéristiques que vous ne trouverez pas forcément sur

des appareils ordinaires. Veuillez prendre quelques instants pour lire cette notice afin d'utiliser

au mieux votre appareil.

Visitez notre site Internet pour :

Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :

www.aeg.com

Enregistrer votre produit pour obtenir un meilleur service :

www.aeg.com/productregistration

Acheter des accessoires, consommables et pièces de rechange d'origine pour votre

appareil :

www.aeg.com/shop

SERVICE APRÈS-VENTE

N'utilisez que des pièces de rechange d'origine.

Avant de contacter le service, assurez-vous de disposer des informations suivantes :

Vous trouverez ces informations sur la plaque signalétique. Modèle, PNC, numéro de série.

Avertissement/Attention : consignes de sécurité.

Informations générales et conseils

Informations écologiques

Sous réserve de modifications.

FRANÇAIS 17

INSTRUCTIONS DE SÉCURITÉ

Pour votre sécurité et garantir une utili-

sation correcte de l'appareil, lisez atten-

tivement cette notice, y compris les con-

seils et avertissements, avant d'installer

et d'utiliser l'appareil pour la première

fois. Pour éviter toute erreur ou accident,

veillez à ce que toute personne qui utili-

se l'appareil connaisse bien son fonc-

tionnement et ses fonctions de sécurité.

Conservez cette notice avec l'appareil. Si

l'appareil doit être vendu ou cédé à une

autre personne, veillez à remettre cette

notice au nouveau propriétaire, afin qu'il

puisse se familiariser avec son fonction-

nement et sa sécurité.

Pour la sécurité des personnes et des

biens, conservez et respectez les consi-

gnes de sécurité figurant dans cette no-

tice. Le fabricant décline toute responsa-

bilité en cas de dommages dus au non-

respect de ces instructions.

1.1 Sécurité des enfants et

des personnes vulnérables

• Cet appareil n'est pas destiné à être

utilisé par des enfants ou des person-

nes dont les capacités physiques, sen-

sorielles ou mentales, ou le manque

d'expérience et de connaissance les

empêchent d'utiliser l'appareil sans

risque lorsqu'ils sont sans surveillance

ou en l'absence d'instruction d'une

personne responsable qui puisse leur

assurer une utilisation de l'appareil

sans danger.

Empêchez les enfants de jouer avec

l'appareil.

• Ne laissez pas les différents emballa-

ges à portée des enfants. Ils pour-

raient s'asphyxier.

• Si l'appareil doit être mis au rebut,

sortez la fiche de la prise électrique,

coupez le cordon d'alimentation au

ras de l'appareil et démontez la porte

pour éviter les risques d'électrocution

et que des enfants ne restent enfer-

més à l'intérieur.

• Cet appareil est muni de fermetures

magnétiques. S'il remplace un appa-

reil équipé d'une fermeture à ressort,

nous vous conseillons de rendre celle-

ci inutilisable avant de vous en débar-

rasser. Ceci afin d'éviter aux enfants

de s'enfermer dans l'appareil et de

mettre ainsi leur vie en danger.

1.2 Consignes générales de

sécurité

AVERTISSEMENT

Veillez à ce que les orifices de ventila-

tion, situés dans l'enceinte de l'appareil

ou la structure intégrée, ne soient pas

obstrués.

• Les appareils sont destinés unique-

ment à la conservation des aliments

et/ou des boissons dans le cadre d’un

usage domestique normal, tel que ce-

lui décrit dans la présente notice.

– dans des cuisines réservées aux em-

ployés dans des magasins, bureaux

et autres lieux de travail ;

– dans les fermes et par les clients

dans des hôtels, motels et autres

lieux de séjour ;

– dans des hébergements de type

chambre d'hôte ;

– pour la restauration et autres utilisa-

tions non commerciales.

• N'utilisez pas d'appareils électriques,

d'agents chimiques ou tout autre sys-

tème artificiel pour accélérer le pro-

cessus de dégivrage.

• Ne faites pas fonctionner d'appareils

électriques (comme des sorbetières

électriques, ...) à l'intérieur des appa-

reils de réfrigération à moins que cet-

te utilisation n'ait reçu l'agrément du

fabricant.

• N'endommagez pas le circuit frigorifi-

que.

• Le circuit frigorifique de l’appareil

contient de l’isobutane (R600a), un gaz

naturel offrant un haut niveau de com-

patibilité avec l’environnement mais

qui est néanmoins inflammable.

Pendant le transport et l'installation

de votre appareil, assurez-vous qu'au-

cune partie du circuit frigorifique n'est

endommagée.

www.aeg.com

Si le circuit frigorifique est endomma-

gé :

– évitez les flammes vives et toute au-

tre source d'allumage

– aérez soigneusement la pièce où se

trouve l'appareil

• Ne modifiez pas les spécifications de

l'appareil. Si le câble d'alimentation

est endommagé, il peut causer un

court circuit, un incendie et/ou une

électrocution.

AVERTISSEMENT

Les éventuelles réparations ou

interventions sur votre appareil,

ainsi que le remplacement du câ-

ble d'alimentation, ne doivent

être effectuées que par un pro-

fessionnel qualifié.

Ne branchez pas le cordon d'ali-

mentation à une rallonge.

Assurez-vous que la prise n'est

pas écrasée ou endommagée par

l'arrière de l'appareil. Une prise de

courant écrasée ou endommagée

peut s'échauffer et causer un in-

cendie.

Vérifiez que la prise murale de

l'appareil est accessible.

Ne débranchez pas l'appareil en

tirant sur le câble.

Si la prise murale n'est pas bien fi-

xée, n'introduisez pas de prise de-

dans. Risque d'électrocution ou

d'incendie.

N'utilisez pas l'appareil sans le dif-

fuseur de l'ampoule (si présent) de

l'éclairage intérieur.

• Cet appareil est lourd. Faite attention

lors de son déplacement.

• Ne touchez pas avec les mains humi-

des les surfaces givrées et les produits

congelés (risque de brûlure et d'arra-

chement de la peau).

• Évitez une exposition prolongée de

l'appareil aux rayons solaires.

• Les ampoules (si présentes) utilisées

dans cet appareil sont des ampoules

spécifiques uniquement destinées à

être utilisées sur des appareils ména-

gers. Elles ne sont pas du tout adap-

tées à un éclairage quelconque d'une

habitation.

1.3 Utilisation quotidienne

• Ne posez pas d'éléments chauds sur

les parties en plastique de l'appareil.

• Ne stockez pas de gaz ou de liquides

inflammables dans l'appareil (risque

d'explosion).

• Ne placez pas d'aliments directement

contre la sortie d'air sur la paroi arrière

de l'appareil. (Si l'appareil est sans gi-

vre.)

• Un produit décongelé ne doit jamais

être recongelé.

• Conservez les aliments emballés con-

formément aux instructions de leur fa-

bricant.

• Respectez scrupuleusement les con-

seils de conservation donnés par le fa-

bricant de l'appareil. Consultez les ins-

tructions respectives.

• Ne mettez pas de bouteilles ni de boî-

tes de boissons gazeuses dans le com-

partiment congélateur, car la pression

se formant à l'intérieur du contenant

pourrait le faire éclater et endomma-

ger ainsi l'appareil.

• Ne consommez pas certains produits

tels que les bâtonnets glacés dès leur

sortie de l'appareil, car ils peuvent

provoquer des brûlures.

1.4 Entretien et nettoyage

• Avant toute opération d'entretien,

mettez l'appareil hors tension et dé-

branchez-le de la prise de courant.

• N'utilisez pas d'objets métalliques

pour nettoyer l'appareil.

• N'utilisez pas d'objet tranchant pour

gratter la couche de givre. Utilisez une

spatule en plastique.

• Contrôlez régulièrement l'orifice

d'évacuation de l'eau de dégivrage

dans le compartiment réfrigérateur.

Nettoyez-le, si besoin. Si l'orifice est

bouché, l'eau s'écoulera en bas de

l'appareil.

1.5 Installation

Avant de procéder au branche-

ment électrique, respectez scru-

puleusement les instructions

fournies dans cette notice.

FRANÇAIS 19

• Déballez l'appareil et vérifiez qu'il

n'est pas endommagé. Ne branchez

pas l'appareil s'il est endommagé. Si-

gnalez immédiatement au revendeur

de l'appareil les dommages constatés.

Dans ce cas, gardez l'emballage.

• Il est conseillé d'attendre au moins

quatre heures avant de brancher l'ap-

pareil pour que le circuit frigorifique

soit stabilisé.

• Veillez à ce que l'air circule librement

autour de l'appareil pour éviter qu'il

ne surchauffe. Pour assurer une venti-

lation suffisante, respectez les instruc-

tions de la notice (chapitre Installa-

tion).

• Placez l'appareil dos au mur pour évi-

ter tout contact avec le compresseur

et le condenseur (risque de brûlure).

• Placez de préférence votre appareil

loin d'une source de chaleur (chauffa-

ge, cuisson ou rayons solaires trop in-

tenses).

• Assurez-vous que la prise murale reste

accessible après l'installation de l'ap-

pareil.

• Branchez à l'alimentation en eau pota-

ble uniquement. (Si un branchement

sur le réseau d'eau est prévu.)

1.6 Maintenance

• Les branchements électriques néces-

saires à l'entretien de l'appareil doi-

vent être réalisés par un électricien

qualifié ou une personne compétente.

• Cet appareil ne doit être entretenu et

réparé que par un Service après-vente

autorisé, exclusivement avec des piè-

ces d'origine.

1.7 Protection de

l'environnement

Le système frigorifique et l'isola-

tion de votre appareil ne con-

tiennent pas de C.F.C. contri-

buant ainsi à préserver l'environ-

nement. L'appareil ne doit pas

être mis au rebut avec les ordu-

res ménagères et les déchets ur-

bains. La mousse d'isolation con-

tient des gaz inflammables : l'ap-

pareil sera mis au rebut confor-

mément aux règlements applica-

bles disponibles auprès des au-

torités locales. Veillez à ne pas

détériorer les circuits frigorifi-

ques, notamment au niveau du

condenseur. Les matériaux utili-

sés dans cet appareil identifiés

par le symbole

sont recycla-

bles.

2. BANDEAU DE COMMANDE

65 7 84321 15141312119 10

Touche ON/OFF

Dispositif de réglage de températu-

re du réfrigérateur, touche +

Affichage de la température du

compartiment réfrigérateur

Dispositif de réglage de températu-

re du réfrigérateur, touche -

Touche COOLMATIC

Voyant COOLMATIC

www.aeg.com

La page est en cours de chargement...

AEG S80400KG Manuel utilisateur

Marque: AEG

Modèle: S80400KG

Catégorie: Congélateurs

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: AEG S80400KG User manual

AEG S80400KG Manuel utilisateur

AEG S80400KG Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents