Sony AVD-S500ES Manuel utilisateur

4-248-074-11(2)

Super Audio CD/

DVD RECEIVER

Operating instructions

Mode d’emploi

AVD-S500ES

US

FR

2

US

3

Caution – The use of optical instruments

with this product will increase eye

hazard.

For the customers in the U.S.A

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

This symbol is intended to alert the user to

the presence of uninsulated “dangerous

voltage” within the product’s enclosure that

may be of sufficient magnitude to constitute a risk of

electric shock to persons.

This symbol is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Owner’s Record

The model and serial numbers are located at the rear of

the unit. Record the serial number in the space

provided below. Refer to them whenever you call upon

your Sony dealer regarding this product.

Model No. AVD-S500ES

Serial No.______________

WARNING

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

You are cautioned that any changes or modifications

not expressly approved in this manual could void your

authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical.

For the customers in Canada

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ENERGY STAR

®

is a U.S.

registered mark.

As an ENERGY STAR

®

partner,

Sony Corporation has determined

that this product meets the

ENERGY STAR

®

guidelines for

energy efficiency.

WARNING

3

US

Precautions

Safety

• If anything falls into the cabinet, unplug the unit and

have it checked by qualified personnel before

operating it any further.

• The unit is not disconnected from the mains as long

as it is connected to the mains outlet, even if the unit

itself has been turned off.

• Unplug the unit from the wall outlet if you do not

intend to use it for an extended period of time. To

disconnect the cord, pull it out by the plug, never by

the cord.

Installing

• Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

• Allow adequate air circulation to prevent internal

heat buildup.

• Do not place the unit on surfaces (rugs, blankets, etc.)

or near materials (curtains, draperies) that may block

the ventilation slots.

• Do not install the unit near heat sources such as

radiators, or air ducts, or in a place subject to direct

sunlight, excessive dust, mechanical vibration, or

shock.

• Do not install the unit in an inclined position. It is

designed to be operated in a horizontal position only.

• Keep the unit and discs away from equipment with

strong magnets, such as microwave ovens, or large

loudspeakers.

• Do not place heavy objects on the unit.

• If the unit is brought directly from a cold to a warm

location, moisture may condense inside the receiver

and cause damage to the lenses. When you first install

the unit, or when you move it from a cold to a warm

location, wait for about 30 minutes before operating

the unit.

Thank you for purchasing this Sony Super

Audio CD/DVD RECEIVER. Before operating

this system, please read this manual thoroughly

and retain it for future reference.

On safety

Should any solid object or liquid fall into the cabinet,

unplug the receiver and have it checked by qualified

personnel before operating it any further.

On placement

• Place the receiver in a location with adequate

ventilation to prevent heat build-up in the receiver.

• At high volume, over long periods of time, the cabinet

becomes hot to the touch. This is not a malfunction.

However, touching the cabinet should be avoided. Do

not place the unit in a confined space where

ventilation is poor as this may cause overheating.

• Do not block the ventilation slots by putting anything

on the receiver. The receiver is equipped with a high

power amplifier. If the ventilation slots on the top

surface are blocked, the unit can overheat and

malfunction.

• Do not place the receiver on a soft surface such as a

rug that might block the ventilation holes on the

bottom.

• Do not place the receiver in a location near heat

sources, or in a place subject to direct sunlight,

excessive dust, or mechanical shock.

On operation

• If the receiver is brought directly from a cold to a

warm location, or is placed in a very damp room,

moisture may condense on the lenses inside the

receiver. Should this occur, the receiver may not

operate properly. In this case, remove the disc and

leave the receiver turned on for about half an hour

until the moisture evaporates.

• When you move the receiver, take out any disc. If you

don’t, the disc may be damaged.

• For power saving purposes, the receiver can be

completely turned off by the POWER button on the

main unit. Though the LED remains lit for a while,

the receiver is completely off.

Welcome!

Precautions

continued

4

US

On adjusting volume

Do not turn up the volume while listening to a section

with very low level inputs or no audio signals. If you

do, the speakers may be damaged when a peak level

section is played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth

slightly moistened with a mild detergent solution. Do

not use any type of abrasive pad, scouring powder or

solvent such as alcohol or benzine.

If you have any questions or problems concerning your

receiver, please consult your nearest Sony dealer.

On cleaning discs

Do not use a commercially available CD/DVD

cleaning disc. It may cause a malfunction.

On your TV’s color

If the speakers should cause the TV screen to have

color irregularity, turn off the TV at once then turn it

on after 15 to 30 minutes. If color irregularity should

persist, place the speakers farther away from the set.

The nameplate is located on the rear of the unit.

On moving the receiver

When you carry the receiver, use the following

procedure to protect the inner mechanism.

Remove the disc. “NO DISC” is displayed in the front

panel display. Turn off the receiver and remove the AC

power cord from a wall outlet.

IMPORTANT NOTICE

Caution: This receiver is capable of holding a still

video image or on-screen display image on your

television screen indefinitely. If you leave the still

video image or on-screen display image displayed

on your TV for an extended period of time you risk

permanent damage to your television screen.

Projection televisions are especially susceptible to

this.

5

US

Welcome!................................................3

Precautions..............................................3

About this Manual...................................7

This receiver Can Play the Following

Discs .................................................7

Terms for discs........................................7

Notes about Discs ...................................9

Guide to the Control Menu Display......11

Getting Started

Unpacking.............................................13

Inserting Batteries into the Remote.......13

Step 1: Speaker System Hookup...........14

Step 2: Antenna Hookups .....................17

Step 3: TV and Video Component

Hookups..........................................19

Step 4: Connecting the AC Power Cord

(mains lead) ....................................21

Speaker Setup........................................22

Playing Discs

Playing Discs ........................................23

Resuming Playback from the Point Where

You Stopped the Disc.....................25

(Resume Play)

Using the DVD’s Menu........................26

Playing VIDEO CDs with PBC Functions

(Ver. 2.0).........................................26

(PBC Playback)

Playing an MP3 Audio Track ...............27

Playing JPEG Image Files ....................29

Creating Your Own Program................31

(Program Play)

Playing in Random Order .....................32

(Shuffle Play)

Playing Repeatedly ...............................33

(Repeat Play)

Searching for a Particular Point on a

Disc.................................................34

(Scan, Slow-motion Play)

Searching for a Title/Chapter/Track/

Index/Album/File............................35

Viewing Disc Information ....................37

Sound Adjustments

Changing the Sound.............................. 42

Enjoying Surround Sound ....................44

Selecting the Surround Back Decoding

Mode...............................................48

Selecting the Decode Priority............... 49

Changing the Speaker Impedance

Value .............................................. 50

Using Various Additional

Functions

Changing the Angles ............................ 51

Displaying Subtitles.............................. 52

Adjusting the Playback Picture.............53

(PICTURE MODE)

Locking Discs....................................... 54

(CUSTOM PARENTAL

CONTROL, PARENTAL

CONTROL)

Other Operations

Controlling Other Units with the Supplied

Remote ........................................... 59

Using Other Units................................. 62

Enjoying the Radio...............................62

Changing the Brightness of the Front

Panel...............................................65

Settings and Adjustments

Using the Setup Display....................... 66

Setting the Display or Sound Track

Language........................................ 67

(LANGUAGE SETUP)

Settings for the Display ........................68

(SCREEN SETUP)

Custom Settings.................................... 69

(CUSTOM SETUP)

Settings for the Speakers ......................70

(SPEAKER SETUP)

Table of Contents

continued

6

US

Additional Information

Troubleshooting....................................74

Specifications........................................77

Glossary ................................................78

Index to Parts and Controls...................81

Language Code List..............................85

DVD Setup Menu List..........................86

Index .....................................................88

7

US

• The instructions in this manual describe the

controls on the remote. You can also use the

controls on the receiver if they have the same

or similar names as those on the remote.

• The following symbols are used in this

manual.

* MP3 (MPEG1 Audio Layer 3) is a standard format

defined by ISO/MPEG which compresses audio

data.

The “DVD VIDEO” logo is a trademark.

• Title

The longest section of a picture or music

feature on a DVD, movie, etc., in video

software, or the entire album in audio

software.

• Chapter

Section of a picture or a music piece that is

smaller than titles. A title is composed of

several chapters. Depending on the disc, no

chapters may be recorded.

• Album

Section of a music piece or an image on a data

CD containing MP3 audio tracks or JPEG

files.

• Track

Section of a picture or a music piece on a

VIDEO CD, Super Audio CD, CD, or MP3.

• Index (Super Audio CD, CD) / Video

Index (VIDEO CD)

A number that divides a track into sections to

easily locate the point you want on a VIDEO

CD, Super Audio CD or CD. Depending on the

disc, no indexes may be recorded.

• Scene

On a VIDEO CD with PBC functions

(page 26), the menu screens, moving pictures

and still pictures are divided into sections

called “scenes.”

• File

Section of a picture on a data CD containing

JPEG image files.

About this Manual

Symbol Meaning

Functions available for DVD

VIDEOs and DVD-Rs/DVD-RWs

in video mode or DVD+Rs/

DVD+RWs in video mode

Functions available in VIDEO CD

mode

Functions available in CD mode

Functions available in Super Audio

CD and Audio CD mode

Functions available for MP3* audio

tracks

Functions available for JPEG files

This receiver Can Play the

Following Discs

Format of

discs

Disc logo

DVD VIDEO

Super Audio

CD

VIDEO CD

Audio CD

CD-R/CD-RW

(audio data)

(MP3 files)

(JPEG files)

Terms for discs

Format of

discs

Disc logo

continued

8

US

Note on PBC (Playback Control)

(VIDEO CDs)

This receiver conforms to Ver. 1.1 and Ver. 2.0

of VIDEO CD standards. You can enjoy two

kinds of playback depending on the disc type.

About Multi Session CD

• This receiver can play Multi Session CDs

when an MP3 audio track is contained in the

first session. Any subsequent MP3 audio

tracks recorded in later sessions can also be

played back.

• This receiver can play Multi Session CDs

when a JPEG image file is contained in the

first session. Any subsequent JPEG image files

recorded in later sessions can also be played

back.

• If audio tracks and images in music CD format

or video CD format are recorded in the first

session, only the first session will be played

back.

Region code

Your receiver has a region code printed on the

back of the unit and will only play DVDs

labelled with the same region code.

DVDs labelled will also play on this

receiver.

If you try to play any other DVD, the message

“Playback prohibited by area limitations.” will

appear on the TV screen. Depending on the

DVD, no region code indication may be given

even though playing the DVD is prohibited by

area restrictions.

Examples of discs that the

receiver cannot play

The receiver cannot play the following discs:

• CD-ROMs (except for extension “.MP3,”

“.JPG,” or “.JPEG”)

• CD-Rs/CD-RWs other than those recorded in

the following formats:

– music CD format

– video CD format

– MP3/JPEG format that conforms to

ISO9660* Level 1/Level 2, or its extended

format, Joliet

• Data part of CD-Extras

• DVD-ROMs

• DVD Audio discs

• DVD-RAMs

• DVD-RWs in VR (Video Recording) mode

• DVD+RWs in VR (Video Recording) mode

• Progressive JPEG file

* A logical format of files and folders on CD-ROMs,

defined by ISO (International Standard

Organization)

Disc type You can

VIDEO CDs

without PBC

functions

(Ver. 1.1 discs)

Enjoy video playback (moving

pictures) as well as music.

VIDEO CDs

with PBC

functions

(Ver. 2.0 discs)

Play interactive software using

menu screens displayed on the

TV screen (PBC Playback), in

addition to the video playback

functions of Ver. 1.1 discs.

Moreover, you can play high-

resolution still pictures, if they

are included on the disc.

DVD

structure

VIDEO

CD, Super

Audio CD,

or CD

structure

MP3

structure

Disc

Title

Chapter

Track

Index

Album

Track

JPEG

structure

Disc

Album

File

ALL

9

US

Do not load the following discs:

• A DVD with a different region code (page 8,

79).

• A disc that is neither standard nor circular

(e.g., card, heart, or star shape).

• A disc with paper or stickers on it.

• A disc that has adhesive or cellophane tape still

left on it.

Notes about CD-R/CD-RW/DVD-R/DVD-RW

(Video mode)/DVD+R/DVD+RW (Video

mode)

In some cases, CD-R/CD-RW/DVD-R/DVD-RW

(Video mode)/DVD+R/DVD+RW (Video mode)

cannot be played on this player due to the recording

quality or physical condition of the disc, or the

characteristics of the recording device and authoring

software.

The disc will not play if it has not been correctly

finalized. For more information, see the operating

instructions for the recording device.

Note that discs created in the Packet Write format

cannot be played.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with copyright

protection technologies are marketed by some record

companies. Please be aware that among those discs,

there are some that do not conform to the CD standard

and may not be playable by this product.

Note on playback operations

of DVDs and VIDEO CDs

Some playback operations of DVDs and VIDEO

CDs may be intentionally set by software

producers. Since this receiver plays DVDs and

VIDEO CDs according to the disc contents the

software producers designed, some playback

features may not be available. Also, refer to the

instructions supplied with the DVDs or VIDEO

CDs.

Copyrights

This product incorporates copyright protection

technology that is protected by U.S. patents and

other intellectual property rights. Use of this

copyright protection technology must be

authorized by Macrovision, and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

This system incorporates with Dolby* Digital

and Dolby Pro Logic (II) adaptive matrix

surround decoder and the DTS** Digital

Surround System.

* Manufactured under license from Dolby

Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are

trademarks of Dolby Laboratories.

**Manufactured under license from Digital Theater

Systems, Inc.

“DTS”, “DTS-ES” and “Neo:6” are trademarks of

Digital Theater Systems, Inc.

On handling discs

• To keep the disc clean, handle the disc by its

edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

• Do not expose the disc to direct sunlight or

heat sources such as hot air ducts, or leave it in

a car parked in direct sunlight as the

temperature may rise considerably inside the

car.

• After playing, store the disc in its case.

On cleaning

• Before playing, clean the disc with a cleaning

cloth.

Wipe the disc from the center out.

Notes about Discs

continued

10

US

• Do not use solvents such as benzine, thinner,

commercially available cleaners, or anti-static

spray intended for vinyl LPs.

This receiver can only play back a standard

circular disc. Using neither standard nor circular

discs (e.g., card, heart, or star shape) may cause

a malfunction.

Do not use a disc that has a commercially

available accessory attached, such as a label or

ring.

11

US

Use the Control Menu to select a function that you would like to use. The Control Menu display appears

when the DVD DISPLAY button is pressed. For details, refer to the page in parentheses.

List of Control Menu Items

Guide to the Control Menu Display

DISC Displays the disc name or the disc type inserted into the

receiver.

TITLE (DVD only) (page 35)/

SCENE (only VIDEO CD in PBC playback) /

TRACK (VIDEO CD only) (page 35)

Selects the title (DVD), or the track (VIDEO CD) to be

played.

Displays the scene (VIDEO CD in PBC playback).

CHAPTER (DVD only) (page 36)/

INDEX (VIDEO CD only) (page 36)

Selects the chapter (DVD) or the index (VIDEO CD) to be

played.

ALBUM (MP3 only) (page 28, 35) Selects the album (MP3) to be played.

TRACK (Super Audio CD/CD/MP3

only) (page 28, 35)

Selects the track (Super Audio CD/CD/MP3) to be played.

INDEX (Super Audio CD/CD only)

(page 36)

Displays the index and selects the index (Super Audio CD) to

be played.

TIME (page 37) Checks the elapsed time and the remaining playback time.

Inputs the time code for picture and music searching.

AUDIO (DVD/VIDEO CD/Super

Audio CD/CD/MP3 only) (page 42)

Changes the audio setting.

SUBTITLE (DVD only) (page 52) Displays the subtitles.

Changes the subtitle language.

2: FRENCH

3: SPANISH

1: ENGLISH

Select:

SUBTITLE

DVD

1 2

(

2 7

)

MAKING SCENE

1 8

(

3 4

)

T

1 : 3 2 : 5 5

ENTER

Currently playing title number (Video CD/

Super Audio CD/CD: track number)

Playing time

Currently playing chapter

number (Video CD/Super

Audio CD/CD: index number)

Icon of selected

Control Menu item

Control Menu items

Function name of selected

Control Menu item

Operation message

Disc name or disc

type

Total number of

titles or tracks

recorded

Currently playing

title name

Total number of chapters or indexes recorded

Playback status

(NPlayback, XPause, xStop, etc.)

Type of disc being

played back

Current setting

Options

continued

12

US

Tips

• Each time you press DVD DISPLAY, the Control Menu display changes as follows:

The Control Menu items vary, depending on the disc.

• The Control Menu icon indicator lights up in green t unless you set the REPEAT setting to

“OFF.”

• The “ANGLE” indicator lights up in green only when multiple angles are recorded on the disc.

• The “PICTURE MODE” indicator lights up in green if “STANDARD” is not selected.

ALBUM (JPEG only) (page 29, 35) Selects the album (JPEG) to be played.

FILE (JPEG only) (page 29, 35) Selects the file (JPEG) to be played.

DATE (JPEG only) (page 41) Displays the date information.

ANGLE (DVD only) (page 51) Changes the angle.

PLAYMODE (VIDEO CD/Super

Audio CD/CD/MP3/JPEG only) (page 32)

Selects the play mode.

REPEAT (page 33) Plays the entire disc (all titles/all tracks), one title/chapter/

track/album, or contents of program repeatedly.

PICTURE MODE (DVD/VIDEO

CD/JPEG only) (page 53)

Adjusts the video signal from the receiver in various ways.

Selects the setting that suits the program you are watching.

CUSTOM PARENTAL CONTROL

(page 54)

Sets the disc to prohibit playing.

Control Menu display

Control Menu display off

m

Getting Started

13

US

Check that you have the following items:

• AM loop antenna (1)

• FM wire antenna (1)

• S Video cord (1)

• Remote Commander (remote) RM-SP500 (1)

• R6 (size AA) batteries (2)

• Operating instructions (1)

You can control the receiver using the supplied

remote. Insert two R6 (size AA) batteries by

matching the 3 and # ends on the batteries to

the markings inside the compartment. When

using the remote, point it at the remote sensor

on the receiver.

Notes

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from

the sun or lighting apparatus. Doing so may cause a

malfunction.

• If you do not use the remote for an extended period of

time, remove the batteries to avoid possible damage

from battery leakage and corrosion.

• When you operate the receiver, select DVD or

TUNER function.

Getting Started

Unpacking

Inserting Batteries into

the Remote

14

US

You can enjoy surround sound by connecting 6 speakers (front L/R speakers, center speaker, surround

L/R speakers, surround back speaker) and active subwoofer to the receiver. If you do not connect 6

speakers and active subwoofer to the receiver, the receiver offers the means to optimize the signal

depending on the number of connected speakers. When you connect 2 speakers to the receiver, connect

the speakers to the SPEAKERS FRONT L/R jacks.

Notes

• Be sure to match the speaker cords to their appropriate terminal: 3 to 3, # to #, L to L, and R to R jack.

• Use high performance speakers.

• Use suitable sized speakers of similar performance for the front, center, surround and surround back speakers.

• To obtain the best possible surround sound, specify the speaker parameters (size, distance, level, etc.) on page 70.

Step 1: Speaker System Hookup

Getting Started

15

US

Terminals for connecting the speakers

Connect To the

Front speakers SPEAKERS FRONT L and R terminals

Surround speakers SPEAKERS SURROUND L and R terminals

Surround back speaker SPEAKERS SURROUND BACK terminal

Center speaker SPEAKERS CENTER terminal

Subwoofer SUBWOOFER AUDIO OUT jack

ANTENNA

COMPONENT VIDEO OUT

MONITOR

DIGITAL

TV/SAT

COAXIAL IN

TV/SAT

OPTICAL IN OPTICAL

OUT

AUDIO

IN

Y

(DVD ONLY)

S VIDEO

P

B/CB PR/CR

OUT

FM

75

COAXIAL

AM

TV/SAT VIDEO2

VIDEO2

AUDIO

IN

VIDEO1

AUDIO

IN

L

R

SPEAKERS

IMPEDANCE USE 4-16

SUB

WOOFER

TV/SAT

S VIDEO

IN

VIDEO2

S VIDEO

IN

VIDEO1

S VIDEO

IN

BACK

MONITOR

VIDEO

OUT

TV/SAT

VIDEO

IN

VIDEO2

VIDEO

IN

VIDEO1

VIDEO

AUDIO

OUT

IN

R

SURROUND

CENTER FRONT

L R L

+–

+

–

+–

Front speaker (R)

Center speaker

Front speaker (L)

Surround speaker (R)

Subwoofer

(active type)

Surround speaker (L)

Surround back speaker

continued

16

US

Note for connecting the speaker cords to the receiver

Remove about 10 mm (

3

/8 inch) of insulation at the end of the cord, then twist the exposed wires.

Connect the stripped ends of the cords to the terminals, taking care to avoid contact between the cords.

Make sure the cords are firmly connected to the speaker and receiver terminals.

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the receiver. To prevent this, be sure to follow these

precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch

another speaker terminal or the bare wire of another speaker cord.

Examples of poor speaker cord connection

After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to

check that all the speakers are connected correctly. For details on outputting a test tone, see page 72.

If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker

other than the one currently displayed in the front panel display, the speaker may be short-circuited. If

this happens, check the speaker connection again.

Notes

• Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords

are reversed, the sound will be distorted and will lack bass.

• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on

the speakers.

• When connecting the stripped ends of the speaker cords, make sure the ends do not touch each other or neighbouring

terminals.

10 mm

(3/8 in.)

Stripped speaker cord is touching

another speaker terminal.

Stripped cords are touching each other

due to excessive removal of insulation.

Getting Started

17

US

Connect the supplied AM/FM antennas for listening to the radio.

Terminals for connecting the antennas

Notes

• To prevent noise pickup, keep the AM loop antenna away from the receiver and other components.

• Be sure to fully extend the FM wire antenna.

• After connecting the FM wire antenna, keep it as horizontal as possible.

• When you connect the supplied AM loop antenna, connect the black cord (A) to the U terminal, and the white cord

(B) to the other terminal.

Step 2: Antenna Hookups

Connect the To the

AM loop antenna AM terminals

FM wire antenna FM 75Ω COAXIAL jack

ANTENNA

COMPONENT VIDEO OUT

MONITOR

DIGITAL

TV/SAT

COAXIAL IN

TV/SAT

OPTICAL IN OPTICAL

OUT

AUDIO

IN

Y

(DVD ONLY)

S VIDEO

P

B/CB PR/CR

OUT

FM

75

COAXIAL

AM

TV/SAT VIDEO2

VIDEO2

AUDIO

IN

VIDEO1

AUDIO

IN

L

R

SPEAKERS

IMPEDANCE USE 4-16

SUB

WOOFER

TV/SAT

S VIDEO

IN

VIDEO2

S VIDEO

IN

VIDEO1

S VIDEO

IN

BACK

MONITOR

VIDEO

OUT

TV/SAT

VIDEO

IN

VIDEO2

VIDEO

IN

VIDEO1

VIDEO

AUDIO

OUT

IN

R

SURROUND

CENTER FRONT

L R L

AM loop antenna

FM wire antenna

A

B

AM

continued

18

US

If you have poor FM reception

Use a 75-ohms coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below.

Note

If you connect the receiver to an outdoor antenna, ground it to protect against lightning. To prevent a gas explosion,

do not connect the earth wire to a gas pipe.

ANTENNA

FM

75

COAXIAL

AM

To earth

Outdoor FM antenna

Receiver

Earth wire

(not supplied)

Getting Started

19

US

Required cords

S Video cord for connecting a TV monitor

Audio/Video cords (not supplied)

When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the

components.

Jacks for connecting video components

Note

When the receiver is not set to “DVD” mode, no signal is output from the COMPONENT VIDEO OUT jacks.

Tip

When using the COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR) instead of the S Video jacks or

the Video jacks, your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y,

PB/CB, PR/CR). If your TV accepts progressive format signals, you must use this connection and set

“COMPONENT OUT” to “PROGRESSIVE” in “SCREEN SETUP” (page 69).

Step 3: TV and Video Component Hookups

Connect a To the

TV monitor MONITOR (S VIDEO OUT or VIDEO OUT) jack

VCR VIDEO 1 or VIDEO 2 (S VIDEO IN or VIDEO IN/AUDIO L/R IN) jacks

Digital satellite receiver TV/SAT (S VIDEO IN or VIDEO IN/AUDIO L/R IN) jacks

Yellow (Video)

White (L/audio)

Red (R/audio)

continued

20

US

If you connect a digital satellite receiver with an OPTICAL OUT jack or

a COAXIAL OUT jack

The digital satellite receiver can be connected to the TV/SAT (OPTICAL or COAXIAL) INPUT jack

instead of the AUDIO IN L/R jacks of the receiver.

The receiver can accept both the digital and analogue signals. Digital signals have priority over

analogue signals. If the digital signal ceases, the analogue signal will be processed after 2 seconds.

If you connect a digital satellite receiver without an OPTICAL OUT jack

Connect the digital satellite receiver to the S VIDEO IN or VIDEO IN and AUDIO IN L/R jacks only

of the receiver.

To listen to the TV or game machine (ex: PlayStation 2) sound by using

the receiver

Connect the audio output jacks of the TV or game machine to the VIDEO 2 (AUDIO L/R IN or

OPTICAL IN) jacks of the receiver.

ANTENNA

COMPONENT VIDEO OUT

MONITOR

DIGITAL

TV/SAT

COAXIAL IN

TV/SAT

OPTICAL IN OPTICAL

OUT

AUDIO

IN

Y

(DVD ONLY)

S VIDEO

P

B/CB PR/CR

OUT

FM

75

COAXIAL

AM

TV/SAT VIDEO2

VIDEO2

AUDIO

IN

VIDEO1

AUDIO

IN

L

R

SPEAKERS

IMPEDANCE USE 4-16

SUB

WOOFER

TV/SAT

S VIDEO

IN

VIDEO2

S VIDEO

IN

VIDEO1

S VIDEO

IN

BACK

MONITOR

VIDEO

OUT

TV/SAT

VIDEO

IN

VIDEO2

VIDEO

IN

VIDEO1

VIDEO

AUDIO

OUT

IN

R

SURROUND

CENTER FRONT

L R L

R

L

S VIDEO

OUT

AUDIO

OUT

VIDEO

IN

INPUT

S VIDEO

IN

INPUT

PR/CR

COMPONENT

VIDEO IN

PB/CB

Y

OUTPUT

OPTICAL

R

L

S VIDEO

OUT

AUDIO

OUT

DIGITAL OUT

(OPTICAL)

AV MULTI OUT

IN

OUTOUT OUT OUTOUT

ININ

PlayStation 2

VCR

TV

TV with

COMPONENT VIDEO IN jacks

TV with

S VIDEO IN jack

Digital satellite receiver

La page charge ...

Sony AVD-S500ES Manuel utilisateur

Ce manuel convient également à

Sony AVD-S500ES Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents