LeapFrog Scout's Get Up & Go Walker Parent Guide
- Catégorie
- Jouets d'apprentissage
- Taper
- Parent Guide
Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003535-008
US
Scout's
Get
Up
&
Go
Walker
TM
2
INTRODUCTION
Thank you for purchasing Scout’s Get Up & Go Walker
TM
! Start
with an interactive baby gym that includes a dangling teether
with beads and a mirror for self discovery. When your child is
ready, put the legs on the activity panel to transform it into a
walker with speed control wheels.
Mode Switch
Butterfly
Spinners
Peek-a-Boo
House
Musical Book
Light-Up
Dome
Detachable
Handle
Speed
Control
Light-Up
Piano Keys
Bead Ring
Paw Button
On/Off/Volume
Control Switch
Gears
Leg Screws
Activity
Panel
Walker
Legs
Detachable Phone
Light-Up Face
Bug Bead
Spinner
Mirror
3
INCLUDED IN THIS PACKAGE
• One Scout’s Get Up & Go Walker
TM
activity panel
• One detachable handle
• Two leg screws
• Two walker legs
• One detachable phone
• One parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90
degrees counterclockwise.
Pull out the packaging locks and
discard.
4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the
battery cover.
4. Install 2 new AA (AM-3/LR6) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
5
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.
6
ASSEMBLY
With Scout’s Get Up & Go Walker
TM
safety comes first. To ensure
your child’s safety, adult assembly is required.
Use the Scout’s Get Up & Go Walker
TM
as a gym for infants. Use
as a floor toy (without legs) for sitting play or use as a walker
only when child is able to stand steadily. As with all toys for this
age group, adult supervision is recommended.
1. Attach the Walker Legs by inserting the Leg Screws into
the screw holes.
2. Adjust the desired angle of the Activity Panel, then tighten
each leg screw until you hear a “click”. The click signals when
the safety lock has been enabled.
a. Baby gym b. Activity panel
Note: For smaller babies, rotate
the panel so it’s flat so they can
reach all the manipulatives.
Note: When the legs are removed,
please keep the legs and leg
screws away from children.
7
c. Easel d. Walker
3. To loosen the screws, press and hold
the safety buttons on the bottom side
of the Activity Panel to disengage the
safety locks. Then turn the Leg Screws
counterclockwise. To fully disengage
the safety locks, you may need to
rotate the screw clockwise and then, after it disengages,
counterclockwise.
4. Attach the Handle by pressing it firmly
into the Activity Panel.
5. Insert the Detachable Phone into Scout’s
left paw. To prevent the Detachable
Phone from accidentally falling, do not
insert it when configured as a baby gym.
CAUTION:
ADULT ASSEMBLY REQUIRED
ATTENTION:
Ce jouet doit être assemblé par un adulte
8
PRODUCT FEATURES
1. On/Off/Volume Control Switch
To turn the unit ON, slide the Off/Low/
High Volume Switch to the Low Volume
(
) or the High Volume (
) position.
To turn the unit OFF, slide the Off/Low/
High Volume Switch to the OFF (
)
position.
2. Mode Switch
Slide the Mode Switch to choose Music,
Play and Learn or Let’s Get Moving
modes.
3. Speed Control
Turn to the rabbit icon ( ) to allow the
wheels to turn at a regular rate. Turn to
the turtle icon ( ) to allow the wheels
to turn at a slower rate.
4. Paw Button
Press the Paw Button to hear playful
phrases.
5. Peek-a-Boo House
Open and close the door to hear fun
phrases.
9
6. Musical Book
Turn the page back and forth to alternate
between letter, shape and color songs.
7. ButterySpinners
Spin the colorful butterflies.
8. Detachable Phone
Pick up or hang up for fun role-play
phone sounds.
9. Gears
Spin for fun gear play.
10. Bug Bead Spinner
Spin to hear fun music.
10
11. Mirror
Look into the Mirror to learn self-
recognition.
12. Bead Ring
Shake for rattling fun.
13.Light-UpPianoKeys
Press for fun number, shape and musical
sounds and phrases.
ACTIVITIES
1. Music
Press buttons and open and close items
to hear delightful music and educational
songs.
2. PlayandLearn
Press buttons and open and close items
to hear fun shape and color phrases.
11
3. Let’s Get Moving
Press buttons and open and close items
to hear phrases that encourage kids to
be active.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace
the batteries.
4. Turn the unit back ON. The unit will now be ready to
play again.
5. If the unit still does not work, replace with an entire set
of new batteries.
12
Environmental phenomena.
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement.
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
Supplier’s Declaration of Conformity
Trade Name: LeapFrog
®
Model: 6042
Product name: Scout’s Get Up & Go Walker
TM
Responsible Party: LeapFrog Enterprises, Inc.
Address: 6401 Hollis Street, Suite 100,
Emeryville, CA 94608
Website: leapfrog.com
13
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
support@leapfrog.com. Creating and developing LeapFrog
®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
14
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
Read our complete warranty policy online
at leapfrog.com/warranty
LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
TM & © 2018 LeapFrog Enterprises, Inc.
All rights reserved.
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
91-003535-008
US
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
LeapFrog Scout's Get Up & Go Walker Parent Guide
- Catégorie
- Jouets d'apprentissage
- Taper
- Parent Guide
dans d''autres langues
- English: LeapFrog Scout's Get Up & Go Walker
Documents connexes
-
LeapFrog Scout's Learning Lights Remote Deluxe Parent Guide
-
-
-
-
-
-
-
-
-