B.A. International BA OPTIMA U-MIX Instructions For Use Manual

BA OPTIMA U-MIX

Capsule Mixer

insTrucTions For use

MADE IN TAIWAN

Fabricado en Taiwan

Fabriqué en Taiwan

Hergestellt in Taiwan

base 800

B.A. INTERNATIONAL LTD.

Unit 9, Kingsthorpe Business Centre

Studland Road, Northampton - NN2 6NE

U.K.

Rev. 2018/07

MEZCLADOR DE CÁPSULAS UNIVERSAL

Modo de eMpleo

VIBREUR MALAXEUR

Mode d’eMploi

UNIVERSAL KAPSELMISCHER

GebrauchsanweisunG

2

BA OPTIMA U-MIX

1. First of all, we would like to thank you for purchasing BA OPTIMA U-

MIX Capsule Mixer. Please carefully read the user manual and operate

the apparatus accordingly. Please keep this user manual well preserved

for future reference.

2.

BA shall not assume any responsibility for any malfunction or damage that

was caused by improper operation, removal, modification or maintenance.

3. We shall not assume any responsibility for malfunction or damage that

was caused by operating in an unsuitable environment.

4. We cannot be held liable for any malfunction or damage caused by

improper use, poor maintenance or force majeure

5. BA reserves the right to decline any responsibility for defective products

which may have been caused by natural disasters, abnormal

temperature or humidity that is inconsistent with the instructions in this

manual.

Disclaimer:

•

Content:

•

Intended Use........................................................................................

Professional Use Statement................................................................

Safety Precautions...............................................................................

Explanation of Graphical Symbols.......................................................

Product parts & accessories................................................................

Important tips before operation............................................................

Operating Steps...................................................................................

Important tips on product maintenance................................................

Important tips on product cleaning.......................................................

Troubleshooting....................................................................................

Product Specification............................................................................

EMC Tables..........................................................................................

3

4

5

6

7

8

9

10

11

12

3

ENGLISH

Intended use:

"BA OPTIMA U-MIX Capsule Mixer" is intended for the

mixing of dental material capsules. Applies to all capsules

products on the market.

Professional Use Statement:

3

This device is capsule mixer for dental use. Used only in

dental clinics and operated by trained personnel.

4

INTENDED USE

Please follow the instructions in this manual for correct and safe operation

of the device. Pay special attention to the following warning signs beside

the operation descriptions where applicable.

EU-wide legislation, as implemented in each Member State,

requires that waste electrical and electronic products carrying

the mark (left) must be disposed of separately from normal

household waste. This includes monitors and electrical

accessories, such as sign

al cables or power cords. When you

need to dispose of your display products, please follow the

guidance of your local authority, or ask the shop where you

purchased the product, or if applicable, follow any agreements

made between yourself.

The mark on electrical and electronic products only applies to

the current European Union Member States.

DANGER :

This message appears where improper operation may cause severe

injury to the human body if instructions are not followed correctly.

WARNING :

This message appears where improper operation may cause

serious damage or defect to other objects or the device itself if

instructions are not followed correctly.

CAUTION :

This message appears where improper operation may cause

slight injury to the human body if instructions are not followed

correctly.

IMPORTANT :

This message appears wher

e improper operation may cause

slight damage or defect to other objects or the device itself if

instructions are not followed correctly.

SAFETY PRECAUTIONS

5

Product Cleaning:

If there is any dirt or stains on the surface, please use a cloth to wipe clean.

If it is hard to clean, please use a neutral cleansing agent. 70% isopropyl

alcohol is recommended.

IMPORTANT :

Never use a solvent, volatile oil or immerse for cleaning.

IEC 60878 safety Sign ISO 7010-M002:Refer to the instruction manual.

Indicates the polarity of the DC power input.

CLASS I equipment has met requirements of European Medical

Device Directive 93/42/EEC.

WARNING :

Do not modify this device without authorization of the manufacturer.

IMPORTANT :

Do not use other adapters without authorization from the

manufacturer.

CAUTION :

Please check the specification before using the adapter, the

incorrectness could cause the malfunction of the product.

Explanation of Graphical Symbols:

ENGLISH

CAUTION :

Please use dental material capsules. Do not use corrosive materials

to cause the malfunction of the product.

1. Protective Shield:

The safety switch will be activated when the Protective Shield is

not closed. The machine will automatically stop its operation in

case the protective shield is opened.

2.

Holding Arms:

Where to place the capsule.

3. Power Button:

The Mode indicator & Time Display indicator will start to blink

(showing display of “10” ) when the power button is pressed ON.

4.

Mode Set-up Buttons:

Press Mode button to set required Mode setting.

5. Mode Indicator:

When the required mode is selected, the corresponding indicator

will be turned on.

6.

▲ ▼

-

Timer Setting Button:

To set the mixing time, adjustable from 1-30 seconds.

7. Time Display indicator:

Displays the selected mixing time. The timer will blink during

operation as it counts down.

8. START/STOP Button:

Press the button to start operation. Press once again to stop the

oper-ation at anytime.

9. Adapter(UK/EU/AUS) : 100V ~ 240V 50/60Hz

2A

6

1

2

6

8

3

7

5

4

9

+

-

Product Parts & Accessories

Please read the following information thoroughly before first use.

Important tips before Operation

Due to transportation requirements, all the motors inside each unit

are secured with 2 fixing screw bolts. Please observe the diagram

below for removing these screws before placing the capsule mixer

on the cabinet.

1. Please unscrew the two screw bolts,

which are pre-installed at the bottom

of each unit, as shown in the

Diagram 1.

Please maintain the balance of the

apparatus while removing the screw

bolts. Please remove the two bolts

simultaneously as unscrewing

1 bolt at a time could result in

difficulties loosening the second bolt.

2. Please retain the two bolts to the

screw holes as shown in Diagram 2,

for future needs. When the

apparatus is required to be

transported from one place to

another, please screw back these

two screw bolts before removal or

delivery to prevent possible damage.

3. Insert the “L” shape plug into

the amalgamator power socket,

then connect the power plug with the

adaptor. Please make sure the

power plug is connected securely

(As shown in Diagram 3)

7

1

2

3

ENGLISH

8

Operating STEPS

1.

After pressing the Power button on,

the mode indicator and the time

indicator will start blinking. As shown

in diagram 4.

2. Depending on each capsules different characteristics, the

time required for mixing may vary from each other.

※ The Amalgam capsule & Filling material require an average time

of 10 seconds to gain a consistent mixture. Material

with special specifications may vary with different capsules.

※ Mixing time can be reset at any given time setting between 1 to

30 seconds. The user is able to setup two different time settings

using the memory. Regarding individual capsule time setting, please

review the instruction manual accompanied with the capsule

products for further details.

1) Please make sure the Protective glass is securely closed.

2) Press Set button to select the designated mode.

3) Press to change the time set up mode. Press “” or “ ”

to add or reduce the mixing time by one second.

4) Press “SET” button to confirm the setting. The time indicator

will change from a blinking display to a fixed display.

3.

Open the Protective shield, and place the capsule into the

holding arms as shown in diagram 5.

4

5

8

4. Securely close the protective glass and press “START/STOP”

button to begin mixing operation. The timer display on the

screen will start to countdown as time proceeds.

•

This apparatus will not operate if the protective glass is not

securely shut. The time indicator will display “OFF” as a

result.

5. After Mixing is complete, please open the protective glass and take the

capsule from the holding arms. Please review diagram 6 for

removing the capsule.

1. Do not operate when the capsule is not in place. Operation without

the capsule may result in malfunction. This damage is not covered

under the warranty.

2. This product should not be placed in direct sunlight. DO NOT

place this product in a dusty environment.

3. If any liquid escapes from the capsule to the inside of the mixing

chamber, immediately wipe clean to prevent possible damage,

colour change or metallic distortion caused by dental use liquid or

solvent.

Clean the surface of this equipment with a soft clean cloth

soaked in warm water or a mild neutral cleaning agent. Avoid

using a volatile solvent when cleaning.

9

Important tips on Product maintenance

Important tips on Product cleaning

6

ENGLISH

10

In the unlikely event of a problem occurring with the capsule mixer,

please check against the below listed SOP. If the solution is not

provided below, please contact your local dealer or BA International for

a solution or repair. Thank you.

Scenario Possible Cause Possible Solution

The power adaptor

might be loose.

Ensure the power adaptor

is plugged in to the unit.

The L shaped plower

plug might be loose.

Ensure the L shaped plug

is properly plugged in.

Unable to operate

when pressing

START / STOP

button

The protective shield

is open.

Make sure the protective

shield is firmly shut.

The apparatus

moves during

operation.

Please check if the

apparatus is placed on

uneven surface.

Please place a securely

stable plastic pad under

the equipment.

Abnormal Noise

2 Screw bolts have

not been removed.

Unscrew the two screw bolts

at the bottom of the units.

All B.A. International Products are manufactured under thorough quality

control. If the apparatus were to be broken under normal operation

in accordance with the Instruction Manual and within the warranty

period, the broken unit is subject to repair and maintenance free of

charge. Please contact your nearest local dealer or B.A. International

for your inquiry & best solution. Our warranty period extends to 1

year from the date of purchase.

Trouble Shooting

Product Warranty & Repair

Product Classification:

Protection against power strike CLASS I equipment

Voltage DC24V

Input Power 50VA

Specification on the power adaptor

11

Product Specification

(Input) AC100V~240V 50/60Hz, 2A

(Output) DC24V

, 2.7A

System storage conditions

System transportation conditions

Temperatur e: 25°C to 35°C (77°F~9 5°F)

Humidity: 15% to 95% @ 40°C, noncondensing

Atmospheric Pressure: 700-1060 hpa

Temperatur e: -20°C to 65°C (-4°F~149°F)

Humidity: 15% to 95% @ 40°C, noncondensing

Atmospheric Pressure: 700-1060 hpa

Temperatur e: -20°C to 65°C (-4°F~149°F)

Humidity: 15% to 95% @ 40°C, noncondensing

Atmospheric Pressure: 700-1060 hpa

System operational conditions

ENGLISH

EMC TABLES

Guidance and manufacturer's declaration – electromagnetic emissions

The model BASE800 is intended for use in the electromagnetic environment specified below.

The customer or the user of the model BASE800 should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment – guidance

RF emissions

CISPR 11

RF emissions

CISPR 11

Harmonic emissions

IEC 61000-3-2

Voltage fluctuations/

flicker emissions

IEC 61000-3-3

Group 1

Class B

Class A

Not applicable

The model BASE800 uses RF energy only for its internal

function. Therefore, its RF emissions are very low and are

not likely to cause any interference in nearby electronic

equipment.

The model BASE800 is suitable for use in all

establishments, including domestic establishments and

those directly connected to the public low-voltage

power supply network that supplies buildings used for

domestic purposes.

Recommended separation distances between

portable and mobile RF communications equipment and the model BASE800

The model BASE800 is intended for use in an electromagnetic environment in which radiated RF

disturbances are controlled. The customer or the user of the model BASE800 can help prevent

electromagnetic interference by maintaining a minimum distance between portable and mobile RF

communications equipment (transmitters) and the model BASE800 as recommended below, according to

the maximum output power of the communications equipment.

Rated maximum output

power of transmitter W

Separation distance according to frequency of transmitter

m

150 kHz to 80 MHZ

d = 1,2

P

80 MHz to 800 MHZ

d = 1,2

P

0,01

0,1

1

10

100

0,12

0,38

1,2

3,8

12

0,12

0,38

1,2

3,8

12

0,23

0,73

2,3

7,3

23

For transmitters rated at a maximum output power not listed above, the recommended separation distance

d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P

is the maximum output power rating of the transmitter in watts (W) according to the transmitter

manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by

absorption and reflection from structures, objects and people.

800 MHz to 2,5 GHz

d = 2,3

P

12

Guidance and manufacturer's declaration – electromagnetic immunity

The model BASE800 is intended for use in the electromagnetic environment specified below. The

customer or the user of the model BASE800 should assure that it is used in such an environment.

Immunity test

IEC 60601

test level

Compliance level

Electromagnetic environment –

guidance

Electrostatic

discharge (ESD)

IEC 61000-4-2

± 6 kV contact

± 8 kV air

± 6 kV contact

± 8 kV air

Floors should be wood, concrete or

ceramic tile. If floors are covered

with synthetic material, the relative

humidity sh

ould be at least 30 %.

Electrical fast

transient/burst

IEC 61000-4-4

± 2 kV for power

supply lines

± 1 kV for

input/output

lines

± 2 kV for power

supply lines

± 1 kV for input/output

lines

Mains power quality should be that

of a typical commercial or hospital

environment.

Surge

IEC 61000-4-5

± 1 kV line(s) to

line(s)

± 2 kV line(s) to

earth

± 1 kV line(s) to line(s)

± 2 kV line(s) to earth

Mains power quality should be that

of a typical commercial or hospital

environment.

interruptions and

voltage

variations

on power supply

input lines

IEC 61000-4-11

<5 %

(>95% dip in UT)

for 0,5 cycle

40 % UT

(60 % dip in UT)

for 5 cycles

70 % UT

(30 % dip in UT)

for 25 cycles

<5 % UT

(>95% dip in UT)

for 5 sec

UT

<5 %

(>95% dip in UT)

for 0,5 cycle

40 % UT

(60 % dip in UT)

for 5 cycles

70 % UT

(30 % dip in UT)

for 25 cycles

<5 % UT

(>95% dip in UT)

for 5 sec

UT

Mains power quality should be that

of a typical commercial or hospital

environment. If the user of the

model BASE800 requires continued

operation during power mains

interruptions, it is recommended

that the model BASE800 be

powered from an uninterruptible

power supply or a battery.

Power frequency

(50/60 Hz)

magnetic field

IEC 61000-4-8

3 A/m 3 A/m

Power frequency magnetic fields

should be at levels characteristic

of a typical location in a typical

commercial or hospital environment.

NOTE UT is the a.c. mains voltage prior to application of the test level.

13

ENGLISH

Guidance and manufacturer's declaration – electromagnetic immunity

The model BASE800 is intended for use in the electromagnetic environment specified below.

The customer or the user of the model BASE800 should assure that it is used in such an environment.

Immunity test

IEC 60601test

level

Compliance

level

Electromagnetic environment –

guidance

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 Vrms

150 kHz to 80 MHz

3 V/m

80 MHz to 2,5 GHz

3 Vrms

3 A/m

Portable and mobile RF

communications equipment should be

used no closer to any part of the model

BASE800, including cables, than the

recommended separation distance

calculated from the equation applicable

to the frequency of the transmitter.

Recommended separation distance

d = 1,2

P

d = 1,2 8

P

0 MHZ to 800 MHZ

d = 2,3 8

P

00 MHZ to 2,5 GHZ

where P is the maximum output power

rating of the transmitter in watts (W)

according to the transmitter

manufacturer and d is the recommended

separation distance in metres (m).

Field strengths from fixed RF

transmitters, as determined by an

electromagnetic site survey,

a

should be

less than the compliance level in each

frequency range.

b

Interference may occur in the vicinity of

equipment marked with the following

symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by

absorption and reflection from structures, objects and people.

a

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and

land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted

theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an

electromagnetic site survey should be considered. If the measured field strength in the location in which the

model BASE800 is used exceeds the applicable RF compliance level above, the model BASE800 should be

observed to verify normal operation. If abnormal performance is observed, additional measures may be

necessary, such as reorienting or relocating the model BASE800.

b

Over the frequency range 150 kHz to 80 MHz, field strengths should be less than V/m.

14

15

BA Ultimate U-Mix

Descargo de Responsabilidad:

Content:

ESPAÑO

L

•

Partes y Accesorios ...................................................................19

•

Importatnte notas antes de Operacion ..................................... 20

•

Operación ................................................................................. 21

•

Mantenimiento .......................................................................... 22

•

Limpieza del Mezclador ............................................................ 22

•

Resolucion de Problema .......................................................... 23

•

Especificaciones ....................................................................... 24

Precauciones de seguridad ........................................................17

•

Declaración de uso profesional ..................................................16

•

Uso Previsto ...............................................................................16

•

Explicación de los símbolos gráficos .........................................18

•

EMC Tables .............................................................................. 25

1.

Gracias por adquirir el “BA OPTIMA U-MIX Mezclador de Cápsula”.

Preste atención al siguiente contenido para garantizar un

funcionamiento correcto y seguro de este producto.

2. BA no asume ninguna responsabilidad por cualquier mal

funcionamiento o daño que haya sido causado por una operación,

remoción, modificación o mantenimiento incorrectos.

3.

BA no asume ninguna responsabilidad por el mal funcionamiento

o daño causado por operar en un entorno inadecuado.

4. BA no se responsabiliza de ningún mal funcionamiento o daño causado

por un uso inadecuado, mantenimiento deficiente o fuerza mayor.

5. BA se reserva el derecho de declinar cualquier responsabilidad por

productos defectuosos que puedan haber sido causados por desastres

naturales, temperatura anormal o humedad que no se ajuste a las

instrucciones de este manual.

10

16

“BA OPTIMA U-MIX Capsule Mixer”

de materiales dental. Se aplica a todos productos de cápsula en el

mercado.

está diseñado para la mezcla

Uso Previsto:

Declaración de uso profesional

Esta máquina es un mezclador de cápsulas para uso dental.

Utilizado solo en clínicas dentales y operado por personal

capacitado.

17

PELIGRO:

Este mensaje aparece cuando una operación incorrecta podría

causar lesiones graves si no se siguen las instrucciones

adecuadamente.

Precauciones de Seguridad

Siga las instrucciones de este manual para una utilización correcta y

segura del dispositivo. En los casos que corresponda, preste especial

atención a los siguientes símbolos de advertencia que aparecen junto

a las descripciones de uso.

ADVERTENCIA

:

Este mensaje aparece cuando una operaci

ón incorrecta podría

causar lesiones graves o daños a otros objetos si no se siguen

las instrucciones adecuadamente.

PRECAUCIÓN

:

Este mensaje aparece cuando una operaci

ón incorrecta podría

causar daños leves a otros objetos o al cuerp

o humano si no se

siguen las instrucciones adecuadamente.

IMPORTANTE:

Este mensaje aparece cuando la operación podría implicar riesgos

de daños para el dispositivo si no se realiza de forma correcta.

La legislación del ámbito de la Unión Europea, tal como se

implementa en cada Estado miembro, requiere que los residuos

de productos eléctricos y electrónicos que posean la marca

que aparece a la izquierda se desechen por separado de los

derechos domésticos normales. Esta le

gislación incluye monitores

y accesorios eléctricos, como cables de señal o cables de

alimentación. Cuando deba desechar productos con pantalla,

siga las instrucciones de las autoridades locales o consulte a la

tienda en la que adquirió el producto o, si corresponde, siga

cualquier acuerdo realizado de manera privada.

Esta marca en productos eléctricos y electrónicos sólo se aplica

a los Estados miembro actuales de la Unión Europea.

ESPAÑO

L

10

18

IMPORTANTE:

Nunca utilice un solvente o aceite volátil para realizar la limpieza.

Limpieza del producto:

Si existe alguna suciedad o mancha en la superficie, utilice un paño

para limpiar. Si es difícil realizar la limpieza,utilice un agente de limpieza

neutro. Se recomienda alcohol isopropílico al 70%.

IMPORTANTE:

No utilice otros adaptadores sin la autorización del fabricante.

ADVERTENCIA:

No modifique este dispositivo sin la autorización del fabricante.

PRECAUCIÓN:

Compruebe la especificación es correcta antes de ultilizar el

adaptaor. La incorrecioón podría causar avería del producto.

ISO 7000-1641: Siga las instrucciones de operación o

consulte las instrucciones de uso.

Indica la polaridad de la entrada de alimentación de CC.

El equipo de Clase I cumplen con los requisitos de la Directiva

Europea de Dispositivos Médicos 93/42 / EEC.

PRECAUCIÓN:

Utilice cápsulas de material dental. No utilice materiales corrosivos

para causar el mal funcionamiento del producto.

Explicación de los símbolos

gráficos:

19

1.

Cubierta Protectora:

al abrir la cubierta la máquina se apaga instantaneamente

2.

Horquilla:

donde se coloca la cápsula

3.

Botón de encendido:

presione el boton para encender o apagar la máquina. Las

luces de “Mode 1 & 2” y pantalla de temporizador empzeran

a parpadear por 10 segundos.

4.

Botón de configuración de modo:

presione el bóton para programar el modo de operación que

necesita, se puede programar hasta 2 modos de operación.

5.

Indicador de modo:

la luz se prende cuando el modo de operación está seleccionado.

6.

+ botones para medir tiempo de programación de 1 segundo hasta

30 segundos como máximo.

7. Pantalla de temporizador:

desmuestra tiempo de operación que falta de forma descontandose

8. START / STOP :

presione el botón una vez para empezar la operación, para

terminar presione el botón otra vez más.

9.

Adaptador(UK/EU/AUS): 100V~240V 50/60Hz 2A

Partes y Accesorios

ESPAÑOL

1

2

6

8

3

7

5

4

9

20

Importantes Notas antes de Operación

El motor está atornillado para evitar posible daños provocado

durante transportacion . Para poder operar el equipo habra que

destornillar los 2 tornillos como los siguientes paso:

1.

Mantene el equipo en equilibrio

mientras destornille los tornillos

como muestra la diagrama.

Mantene el equilibrio del aparato

mientras retira los tornillos. Retire

los dos tornillos al mismo tiempo

porque desatornillar un perno a

la vez puede ocasionar que el

segundo perno se afloje.

2.

Guarda los tornillos en el

lugar indicado en la diagrama 2

así para posible transportación

Cuando se requiera que el

aparato se transporte de uno a

otro, atornille estos dos tornillos

antes de retirarlos o entregarlos

para evitar posibles daños.

3 Inserte el enchufe en forma de "L"

en la toma de corriente del

amalgamador, luego conecte el

enchufe con el adaptador.

Asegúrese de que el enchufe esté

bien conectado con el amalgamador

como muestra la diagrama 3.

1

2

3

La page est en cours de chargement...

B.A. International BA OPTIMA U-MIX Instructions For Use Manual

B.A. International BA OPTIMA U-MIX Instructions For Use Manual

dans d''autres langues

Autres documents