Zanussi ZWG6100K Manuel utilisateur

Marque: Zanussi

Modèle: ZWG6100K

Catégorie: Machines à laver

Taper: Manuel utilisateur

Ce manuel convient également à

ZWG680K

User manual 2

Notice d'utilisation 16

Washing Machine

Lave-linge

ZWG 680K

ZWG 6100K

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2

Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ 3

Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 4

Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4

Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ 5

Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ 6

Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6

Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7

Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 11

Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13

Technical information _ _ _ _ _ _ _ _ _ _ _ _ 14

Subject to change without notice.

Safety information

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible if an incorrect

installation and use causes injuries and dam-

ages. Always keep the instructions with the ap-

pliance for future reference.

Children and vulnerable people safety

Warning! Risk of suffocation, injury or

permanent disability.

• Do not let persons, children included, with

reduced physical sensory, reduced mental

functions or lack of experience and knowl-

edge use the appliance. They must have su-

pervision or instruction for the operation of

the appliance by a person who is responsible

for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appli-

ance door when it is open.

• If the appliance has a child safety device, we

recommend you activate it.

Installation

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move the

appliance again you must block the drum.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where the

temperature is less than 0 °C or where it is

exposed to the weather.

• Obey the installation instruction supplied

with the appliance.

• Make sure that the floor where you install the

appliance is flat, stable, heat resistant and

clean.

• Do not install the appliance where the appli-

ance door can not be fully opened.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety

gloves.

• Make sure that there is air circulation be-

tween the appliance and the floor.

• Adjust the feet to have the necessary space

between the appliance and the carpet.

Electrical connection

Warning! Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power sup-

ply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and exten-

sion cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Contact the

Service or an electrician to change a dam-

aged mains cable.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

www.zanussi.com

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Do not touch the mains cable or the mains

plug with wet hands.

Water connection

• Make sure not to cause damage to the water

hoses.

• The appliance is to be connected to the wa-

ter mains using the new supplied hose-sets.

Old hose sets must not be reused.

• Before you connect the appliance to new

pipes or pipes not used for a long time, let

the water flow until it is clean.

• The first time you use the appliance, make

sure that there is no leakage.

Use

Warning! Risk of injury, electrical shock,

fire, burns or damage to the appliance.

• Use this appliance in a household environ-

ment.

• Do not change the specification of this appli-

ance.

• Obey the safety instructions on the detergent

packaging.

• Do not put flammable products or items that

are wet with flammable products in, near or

on the appliance.

• Do not touch the glass of the door while a

programme operates. The glass can be hot.

• Make sure that you remove all metal objects

from the laundry.

Care and Cleaning

Warning! Risk of injury or damage to the

appliance.

• Before maintenance, deactivate the appli-

ance and disconnect the mains plug from the

mains socket.

• Do not use water spray and steam to clean

the appliance.

• Clean the appliance with a moist soft cloth.

Only use neutral detergents. Do not use

abrasive products, abrasive cleaning pads,

solvents or metal objects.

Disposal

Warning! Risk of injury or suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent children

and pets to get closed in the appliance.

Environment concerns

The symbol on the product or on its

packaging indicates that this product may not

be treated as household waste. Instead it

should be taken to the appropriate collection

point for the recycling of electrical and

electronic equipment. By ensuring this product

is disposed of correctly, you will help prevent

potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product. For more detailed

information about recycling of this product,

please contact your local council, your

household waste disposal service or the shop

where you purchased the product.

Packaging materials

Recycle the materials with the symbol

Put the packaging in applicable containers to

recycle it.

Ecological hints

To help the environment, use less water and

energy, obey these instructions:

• Set a programme without the prewash phase

to wash laundry with normal soil.

• Always start a washing programme with the

maximum load of laundry.

www.zanussi.com

• If necessary, use a stain remover when you

set a programme with a low temperature.

• To use the correct quantity of the detergent,

check the water hardness of your domestic

system

Product description

1 2 3

Worktop

Detergent dispenser

Control panel

Door handle

Rating plate

Feet for the appliance level

Fixing plate kit (405517114)

Available from your authorized dealer.

If you install the appliance on a plinth, secure

the appliance in the fixing plates.

Follow the instructions supplied with the kit.

Control panel

90°

60°

40°

30°

31 2

5 467

Programme knob

Delay start button

Programme phase indicators:

Washing phase indicator

Extra rinse indicator

End cycle indicator

Start/pause button

Super quick button

Automatic spin reduction

and Rinse

hold

button

Temperature button

www.zanussi.com

Washing programmes

Programme

Temperature range

Type of load and soil

Maximum load, Maximum spin

Cotton

90 °C — Cold

White cotton and coloured cotton (normal soil and light soil).

6 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

+ Cotton with prewash

90 °C — Cold

White cotton and coloured cotton (heavy soil and normal soil).

6 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

Eco Cotton economy

60 °C – 40 °C

White cotton and colour-fast cotton. Normal soil.

6 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

Synthetics

60 °C— Cold

Synthetic items or mixed fabric items. Normal soil.

3 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

Mixed fabrics

Cold

Very energy efficient cold wash programme. Light soil.

3 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

Delicates

40 °C - Cold

Delicate fabrics as acrylics, viscose, polyester items. Normal soil.

3 kg, 700 rpm

Wool/Handwash

40 °C – Cold

Machine washable wool, hand washable wool and delicate fabrics

with «hand washing» care symbol.

2 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

Rinse

To rinse and spin the laundry. All fabrics.

6 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

Drain

To drain the water in the drum. All fabrics.

6 kg

Spin

To spin the laundry and to drain the water in the drum. All fabrics.

6 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

Easy iron

60 °C - Cold

Synthetic fabric items. Normal soil. It prevents the laundry crea-

ses.

1 kg, 900 rpm

Refresh 20

30 °C

Synthetic and mixed fabric items. Light soil and items to freshen

up.

For 5 - 6 shirts, 900 rpm

Mini 30

30 °C

Synthetic and delicate items. Light soil or items to freshen up.

3 kg, 700 rpm

Jeans

60 °C - Cold

Items in denim and jersey. Also for items in dark colours. The Extra

Rinse option activates automatically.

3 kg, 800 rpm (ZWG680K), 1000 rpm (ZWG6100K)

1) Standard programmes for the Energy Label consumption values

According to regulation 1061/2010, the “Cotton economy 60 °C” and “Cotton economy 40 °C” are

respectively the “standard 60 °C cotton programme” and the “standard 40 °C cotton programme”. They are

the most efficient programmes in terms of mixed energy and water consumptions for washing the cotton

laundry with normal soil.

The water temperature of the washing phase can be different from the temperature declared for the set

programme.

2) The default speed is 700 rpm.

www.zanussi.com

Consumption values

The data of this table are approximate. Different causes can change the data: the quantity

and type of laundry, the water and ambient temperature.

Programmes Load

(kg)

Energy con-

sumption

(kWh)

Water con-

sumption (li-

tre)

Approxi-

mate pro-

gramme

duration

(minutes)

Remaining

moisture

(%)

ZWG680K

Remaining

moisture

(%)

ZWG6100K

Cottons 60 °C 6 1.05 60 160 66 60

Cottons 40 °C 6 0.65 60 140 66 60

Synthetics 40

°C

3 0.47 45 90 37 37

Delicates 40

°C

3 0.5 60 80 37 37

Wool/Hand

wash 30 °C

2 0.27 47 55 37 32

Standard cotton programmes

Standard 60 °C

cotton

6 0.98 47 185 66 60

Standard 60 °C

cotton

3 0.76 35 173 66 60

Standard 40 °C

cotton

3 0.59 37 169 66 60

1) At the end of spin phase.

Off Mode (W) Left On Mode (W)

0.65 0.65

Options

Programme

Cotton

∎ ∎ ∎ ∎ ∎

+ Cotton with prewash

∎ ∎ ∎ ∎ ∎

Eco Cotton economy

∎ ∎

Synthetics

∎ ∎ ∎ ∎ ∎

Mixed fabrics

∎ ∎

Delicates

∎ ∎ ∎ ∎ ∎

Wool/Handwash

∎ ∎

∎

Rinse ∎

∎

∎ ∎

www.zanussi.com

Drain

Spin

∎

Easy iron

∎ ∎

Refresh 20

∎

Mini 30

∎

Jeans

∎ ∎

∎

1) When you set the Super Quick option, we recommend that you decrease the quantity of the laundry. It is

possible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 3

kg, synthetics and delicates: 1,5 kg.

Temperature button

Press this button to change the default temper-

ature.

Symbol

— cold water.

Spin

With this button you can set one of these op-

tions:

Automatic spin reduction

Set this function to decrease the spin seed to a

half, but not less than 400 rpm.

Rinse hold

Set this function to prevent the laundry creases.

There is a water in the drum when the pro-

gramme is completed.

Super quick

Press this button to decrease the programme

duration.

Set this function for items with light soil or

items to refresh.

Extra rinse

Press the button and together the button

for some seconds to add the rinsing phase

to a programme.

This function stays permanently on when you

deactivate the appliance. To remove this func-

tion press the same buttons again.

Use this function for persons allergic to deter-

gents and in areas where the water is soft.

Delay start

Press this button to delay the start of a pro-

gramme by 9, 6 or 3 hours.

Before first use

Put a small quantity of detergent in the main

wash compartment of the detergent dispenser.

Set and start a programme for cotton at the

highest temperature without laundry. This re-

moves all possible dirt from the drum and the

tub.

Daily use

1. Open the water tap.

2. Connect the mains plug to the mains sock-

et.

3. Put the laundry in the appliance.

4. Use the correct quantity of detergent and

additives.

5. Set and start the correct programme for

the type of laundry and soil.

www.zanussi.com

Loading the laundry

1. Open the appliance door.

2. Put the laundry in the drum, one item at a

time. Shake the items before you put

them in the appliance. Make sure not to

put too much laundry in the drum.

3. Close the door.

Caution! Make

sure that no

laundry stays be-

tween the seal and

the door. There is a

risk of water leakage

or damage to the

laundry.

Using the detergent and additives

The detergent compartment for the

washing phase.

If you use a liquid detergent, put it im-

mediately before you start the pro-

gramme.

Liquid additives compartment (fabric

conditioner, starch).

Put the product in the compartment be-

fore you start the programme.

Flap for powder or liquid detergent.

When you set a programme with a prewash,

put the detergent directly into the drum.

Using the liquid and the powder

detergent

The default position

of the flap is A (pow-

der detergent).

To use liquid deter-

gent:

1. Remove the

drawer. Push the

drawer edge in

the place with

the arrow

(PUSH) to re-

move the drawer

easily.

2. Adjust the flap in

position B.

3. Put back the

drawer in the re-

cess.

When you use the liquid detergent:

–

Do not use gelatinous or thick liquid de-

tergents.

– Do not put more liquid then 120 ml.

– Do not set the prewash phase.

– Do not set the delay start.

www.zanussi.com

When the flap is in

position B and you

want to use powder

detergent:

1. Remove the

drawer.

2. Adjust the flap in

position A.

3. Put back the

drawer in the re-

cess.

• Measure out the detergent and the fabric

conditioner.

• Put the detergent and the fabric condition-

er into the compartments.

• Carefully close the detergent drawer.

Setting a programme

1. Turn the programme knob and set the pro-

gramme.

2. The indicator of Start button flashes.

3. If necessary, change the temperature and

the spin speed or add available functions.

When you press the relevant button, the in-

dicator of the set function comes on.

Starting a programme without the delay

start

Press the Start button

• the indicator of button Start stops to flash

and the indicator

is on.

• the programme starts and the door locks

Starting a programme with the delay start

•

Press the Delay start button

to set neces-

sary delay. The indicator of the set delay is

on.

•

Press the Start button

The appliance starts the countdown.

When the countdown is completed, the pro-

gramme starts automatically.

You can change or cancel the delay start

before you press the Start button. After

pressing the Start button you can only cancel

the delay.

To cancel the delay start:

Press the Start button

to set the appli-

ance to PAUSE.

Press the Delay button

one time, the in-

dicator of the set delay goes off.

Press the Start button

again to start the

programme immediately.

Interruption of a programme

Press the button

. The indicator flashes.

Press the button

again. The washing

programme continues.

Cancel a programme

Turn the programme knob to

to cancel

the programme and to deactivate the appli-

ance.

2. Turn the programme knob again to activate

the appliance. You can set a new washing

programme then.

The appliance does not drain the water.

Changing the options

You can change only some options before they

operate.

Press the button

. The indicator flashes.

2. Change the options.

Press the button

again. The programme

continues.

Open the door

While a programme or the delay start operates,

the appliance door is locked.

Caution! If the temperature and level of

the water in the drum are too high, you

cannot open the door.

To open the appliance door when the

delay start operates:

Press the button

to set the appliance to

PAUSE.

2. Wait for some minutes and then you can

open the appliance door.

3. Close the appliance door.

Press the button

again and the delay

start continues to operate.

www.zanussi.com

To open the appliance door when the

programme operates:

Turn the programme knob to

to deacti-

vate the appliance.

2. Wait for some minutes and then open the

appliance door.

3. Close the appliance door.

4. Set the programme again.

At the end of the programme

The appliance stops automatically.

•

The start button

indicator goes off.

•

The End indicator

is on.

Turn the programme knob to

to deacti-

vate the appliance.

2. Remove the laundry from the appliance.

Make sure that the drum is empty.

3. Keep the door ajar, to prevent the mildew

and odours.

4. Close the water tap.

The washing programme is completed,

but there is water in the drum:

– The drum turns regularly to prevent the crea-

ses in the laundry.

– The door stays locked and the start button

indicator flashes.

– You must drain the water before you can

open the door.

To drain the water:

1. Set the Drain or the Spin programme.

Press the start button

. The appliance

drains the water and spins.

3. When the programme is completed:

–

The start button

indicator goes off

and the End indicator

is on.

– You can open the door.

Turn the programme knob to

to deacti-

vate the appliance.

Stand by

Some minutes after the end of the washing pro-

gramme, if you do not deactivate the appliance,

the energy saving status activates.

The energy saving status decreases the energy

consumption when the appliance is on the

standby.

• All indicators go off.

• The indicator of button Start flashes slowly

Press one of the buttons to deactivate the en-

ergy saving status.

Hints and tips

The laundry load

• Divide the laundry in: white, coloured, syn-

thetics, delicates and wool.

• Obey the washing instructions that are on

the laundry care labels.

• Do not wash together white and coloured

items.

• Some coloured items can discolour with the

first wash. We recommend that you wash

them separately for the first times.

• Button up pillowcases, close zippers, hooks

and poppers. Tie up belts.

• Empty the pockets and unfold the items.

• Turn inside out multilayered fabrics, wool and

items with painted illustrations.

• Remove hard stains.

• Wash with a special detergent heavy soil

stains.

• Be careful with the curtains. Remove the

hooks or put the curtains in a washing bag or

pillowcase.

• Do not wash in the appliance :

– Laundry without hems or with cuts

– Underwired bras.

– Use a washing bag to wash small items.

• A very small load can cause balance prob-

lems with the spin phase. If this occurs, ad-

just manually the items in the tub and start

the spin phase again.

Stubborn stains

For some stains, water and detergent is not

sufficient.

www.zanussi.com

We recommend that you remove these stains

before you put the items in the appliance.

Special stain removers are available. Use the

special stain remover that is applicable to the

type of stain and fabric.

Detergents and additives

• Only use detergents and additives specially

made for washing machines.

• Do not mix different types of detergents.

• To help the environment, do not use more

than the correct quantity of detergent.

• Obey the instructions that you find on the on

packaging of these products.

• Use the correct products for the type and

colour of the fabric, the programme tempera-

ture and the level of soil.

• If you use liquid detergents, do not set the

prewash phase.

• If your appliance has not the detergent dis-

penser with the flap device, add the liquid

detergents with a dosing ball.

Water hardness

If the water hardness in your area is high or

moderate, we recommend that you use a water

softener for washing machines. In areas where

the water hardness is soft it is not necessary to

use a water softener.

To know the water hardness in your area, con-

tact your local water authority.

Obey the instructions that you find on the pack-

aging of the products.

Care and cleaning

External cleaning

Clean the appliance only with soap and warm

water. Fully dry all the surfaces.

Caution! Do not use alcohol, solvents or

chemical products.

Descaling

The water we use contains limescale. If it be-

comes necessary, use a water softener to re-

move limescales.

Use a special product made for washing ma-

chines. Obey the instructions that you find on

the packaging of the manufacturer.

Do this separately from the laundry wash.

Maintenance wash

With the low temperature programmes it is

possible that some detergent stays in the drum.

Make regularly a maintenance wash. To do this:

• Empty the laundry from the drum.

• Set the hottest cotton wash programme

• Use a correct quantity of powder detergent

with biological properties.

After each wash, keep the door open for a

while to prevent mould and to let unpleasant

smells go out.

Drum

Regularly examine the drum to prevent lime-

scale and rust particles.

Only use special products to remove rust parti-

cles from the drum.

To do this:

• Clean the drum with special product for

stainless steel.

• Start a short programme for cotton at the

maximum temperature with a small quantity

of detergent.

Door seal

Regularly examine the

seal and remove all

objects from the inner

part.

www.zanussi.com

Detergent dispenser

To clean the dispenser:

3. 4.

5. 6.

The inlet hose filter and the valve filter

To clean the water inlet filters:

3. 4.

45°

20°

Frost precautions

If the appliance is installed in an area where the

temperature can be less than 0 °C, remove the

remaining water from the inlet hose and the

drain pump.

1. Disconnect the mains plug from the

mains socket.

2. Close the water tap.

3. Remove the water inlet hose

4. Remove the drain hose from the rear

support and unhook it from sink or spigot

5. Put the ends of the drain and inlet hose

in a container. Let the water flow out of

the hoses.

6. When no more water flows, install the in-

let hose and the drain hose again.

Warning! Make sure that the temperature

is more than 0 °C before you use the

appliance again.

The manufacturer is not responsible for

damages caused by low temperatures.

www.zanussi.com

Troubleshooting

The start of the appliance does not occur or the

appliance stops during operation.

First try to find a solution to the problem (refer

to the table). If not, contact the Service.

During appliance operation it is possible that

the red indicator of button Start flashes and

one of the indicators comes on, to show that

the appliance does not operate:

•

: the appliance does not fill with water.

•

: the appliance does not drain the water.

•

: the appliance door is open or not

closed correctly.

Problem Possible solution

The appliance does not

start.

Make sure that the mains plug is connected in the mains socket.

Make sure that the appliance door is closed.

Make sure that there is not a damaged fuse in the household fuse box.

Make sure that the button Start/Pause has been pressed.

If the delay start is set, cancel the setting or wait for the end of the countdown.

Make sure that the programme knob is in the correct position.

Deactivate the Child Lock function if it is on.

The appliance does not

fill with water.

Make sure that the water tap is opened.

Make sure that the pressure of the water supply is not too low. For this informa-

tion, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter of the inlet hose and the filter of the valve are not clogged.

Refer to 'Care and cleaning'.

Make sure that the inlet hose has no kinks or bends.

Make sure that the connection of the water inlet hose is correct.

The appliance does not

drain the water.

Make sure that the sink spigot is not clogged.

Make sure that the water drain hose has no kinks or bends.

Make sure that the connection of the water drain hose is correct.

Set the drain programme if you set a programme without the drain phase.

Set the drain programme if you set an option which ends with water in the drum.

If above mentioned solutions do not help, contact the Service (as the filter of the

drain pump may be clogged).

The spin phase does

not operate

the washing cycle lasts

longer than usually.

Adjust manually the items in the drum and start the spin phase again. This problem

may be caused by balance problems.

Set the spin programme.

www.zanussi.com

Problem Possible solution

Set the drain programme if you set an option which ends with water in the drum.

If above mentioned solutions do not help, contact the Service (as the filter of the

drain pump may be clogged).

There is water on the

floor.

Make sure that the couplings of the water hoses are tight and there are no water

leakages.

Make sure that the water inlet hose and the water drain hose has no damages.

Make sure you use the correct detergent and the correct quantity of it.

You cannot open the

appliance door.

Make sure that the washing programme is finished.

Set the drain or the spin programme if there is water in the drum.

The appliance makes an

unusual noise.

Make sure that the leveling of the appliance is correct. Refer to 'Installation in-

struction'.

Make sure that the packaging and/or the transit bolts are removed. Refer to 'Instal-

lation instruction'.

Add more laundry in the drum. The load may be too small.

The appliance fills with

water and drain immedi-

ately.

Make sure that the drain hose is in the correct position. The end of the hose may

be is too low. Refer to 'Installation instruction'.

The washing results are

not satisfactory.

Increase the detergent quantity or use a different detergent.

Use special products to remove the stubborn stains before you wash the laundry.

Make sure that you set the correct temperature.

Decrease the laundry load.

After the check, activate the appliance. The

programme continues from the point of inter-

ruption.

If the problem occurs again, contact the Serv-

ice.

Service

We recommend the use of original spare parts.

When contacting the Service, make sure that

these data are available. You can find the infor-

mation on the rating plate: model (Mod.), PNC

(Prod.No.), Serial number (Ser.No.).

Technical information

Dimensions Width / Height / Depth 600 / 850 / 452 mm

Total depth 502 mm

Electrical connection: Voltage

Overall power

Fuse

Frequency

230 V

2100 W

10 A

50 Hz

Level of protection against ingress of solid particles and moisture en-

sured by the protective cover, except where the low voltage equip-

ment has no protection against moisture

IPX4

www.zanussi.com

Water supply pressure Minimum 0,5 bar (0,05 MPa)

Maximum 8 bar (0,8 MPa)

Water supply

Cold water

Maximum load Cotton 6 kg

Spin speed Maximum 800 rpm (ZWG680K)

1000 rpm (ZWG6100K)

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

www.zanussi.com

Sommaire

Consignes de sécurité _ _ _ _ _ _ _ _ _ _ _ 16

En matière de protection de l'environnement

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18

Description de l'appareil _ _ _ _ _ _ _ _ _ _ 18

Bandeau de commande _ _ _ _ _ _ _ _ _ _ 19

Programmes de lavage _ _ _ _ _ _ _ _ _ _ _ 19

Valeurs de consommation _ _ _ _ _ _ _ _ _ 20

Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21

Avant la première utilisation _ _ _ _ _ _ _ _ _ 22

Utilisation quotidienne _ _ _ _ _ _ _ _ _ _ _ 22

Conseils _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 25

Entretien et nettoyage _ _ _ _ _ _ _ _ _ _ _ 26

En cas d'anomalie de fonctionnement _ _ _ 28

Caracteristiques techniques _ _ _ _ _ _ _ _ 30

Sous réserve de modifications.

Consignes de sécurité

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fa-

bricant ne peut être tenu pour responsable des

dommages et blessures liés à une mauvaise in-

stallation ou utilisation. Conservez toujours cet-

te notice avec votre appareil pour vous y référer

ultérieurement.

Sécurité des enfants et des personnes

vulnérables

Avertissement Risque d'asphyxie, de

blessure ou d'invalidité permanente.

• Cet appareil n'est pas conçu pour être utilisé

par des personnes (y compris des enfants)

dont les facultés physiques, sensorielles ou

mentales sont réduites, ou qui manquent

d'expérience et de connaissances, à moins

qu'une personne responsable de leur sécu-

rité ne les supervise ou leur donne des ins-

tructions sur la manière de l'utiliser.

• Ne laissez pas les enfants jouer avec l'appa-

reil.

• Ne laissez pas les emballages à la portée

des enfants.

• Ne laissez pas les détergents à la portée des

enfants.

• Tenez les enfants et les animaux éloignés du

hublot de l'appareil lorsque celui-ci est ou-

vert.

• Si l'appareil est équipé d'un dispositif de sé-

curité enfants, nous vous recommandons de

l'activer.

Installation

• Retirez l'intégralité de l'emballage et les bou-

lons de transport.

• Conservez les boulons de transport. Si vous

devez déplacer à nouveau l'appareil, il est

conseillé de bloquer le tambour.

• N'installez pas et ne branchez pas un appa-

reil endommagé.

• N'installez pas l'appareil ou ne l'utilisez pas

dans un endroit où la température ambiante

est inférieure à 0 °C ou exposé aux condi-

tions météorologiques.

• Suivez scrupuleusement les instructions

d'installation fournies avec l'appareil.

• Assurez-vous que le sol sur lequel vous in-

stallez l'appareil est plat, stable, résistant à la

chaleur et propre.

• N'installez pas l'appareil dans un endroit où il

ne pourrait pas être complètement ouvert.

• L'appareil est lourd, soyez toujours prudent

lorsque vous le déplacez. Portez toujours des

gants de sécurité.

• Assurez-vous que de l'air circule entre l'ap-

pareil et le sol.

• Réglez les pieds pour laisser un espace suf-

fisant entre l'appareil et la surface en mo-

quette.

Branchement électrique

Avertissement Risque d'incendie ou

d'électrocution.

• L'appareil doit être relié à la terre.

www.zanussi.com

• Vérifiez que les données électriques figurant

sur la plaque signalétique correspondent à

celles de votre réseau. Si ce n'est pas le cas,

contactez un électricien.

• Utilisez toujours une prise de courant de sé-

curité correctement installée.

• N'utilisez pas d'adaptateurs multiprises ni de

rallonges.

• Veillez à ne pas endommager la fiche secteur

ni le câble d'alimentation. Contactez le servi-

ce après-vente ou un électricien pour rem-

placer le câble d'alimentation s'il est endom-

magé.

• Ne connectez la fiche d'alimentation à la pri-

se de courant qu'à la fin de l'installation. As-

surez-vous que la prise de courant est ac-

cessible une fois l'appareil installé.

• Ne tirez jamais sur le câble d'alimentation

électrique pour débrancher l'appareil. Tirez

toujours sur la prise.

• Ne touchez jamais le câble d'alimentation ou

la prise avec des mains mouillées.

Raccordement à l'arrivée d'eau

• Veillez à ne pas endommager les tuyaux de

circulation d'eau.

• L'appareil doit être raccordé au circuit d'eau

à l'aide des tuyaux neufs fournis. N'utilisez

pas de tuyaux provenant d'anciens appareils.

• Avant de brancher l'appareil à des tuyaux

neufs ou n'ayant pas servi depuis longtemps,

laissez couler l'eau jusqu'à ce qu'elle soit

propre.

• Avant d'utiliser l'appareil pour la première

fois, assurez-vous de l'absence de fuites.

Utilisation

• Cet appareil est conçu uniquement pour un

usage domestique et des situations telles

que :

– Cuisines réservées aux employés dans

des magasins, bureaux et autres lieux de

travail

– Bâtiments de ferme

– Pour une utilisation privée, par les clients,

dans des hôtels et autres lieux de séjour

– En chambre d'hôtes.

Avertissement Risque de blessure, de

choc électrique, d'incendie, de brûlures ou

de dommage matériel à l'appareil.

• Utilisez cet appareil dans un environnement

domestique.

• Ne modifiez pas les caractéristiques de cet

appareil.

• Suivez les consignes de sécurité figurant sur

l'emballage du produit de lavage.

• Ne placez pas de produits inflammables ou

d'éléments imbibés de produits inflammables

à l'intérieur, à proximité ou sur l'appareil.

• Ne touchez pas la vitre du hublot pendant le

déroulement d'un programme. La vitre peut

être chaude.

• Veillez à retirer tout objet métallique du linge

avant chaque lavage.

Entretien et nettoyage

Avertissement Risque de blessure

corporelle ou de dommages matériels.

• Avant toute opération d'entretien, éteignez

l'appareil et débranchez la prise secteur.

• Ne pulvérisez pas d'eau ni de vapeur pour

nettoyer l'appareil.

• Nettoyez l'appareil avec un chiffon doux hu-

mide. Utilisez uniquement des produits de la-

vage neutres. N'utilisez pas de produits abra-

sifs, de tampons à récurer, de solvants ou

d'objets métalliques.

Mise au rebut

Avertissement Risque de blessure ou

d'asphyxie.

• Débranchez l'appareil de l'alimentation élec-

trique.

• Coupez le câble d'alimentation au ras de

l'appareil et mettez-le au rebut.

• Retirez le dispositif de verrouillage de la por-

te pour empêcher les enfants et les animaux

de s'enfermer dans l'appareil.

www.zanussi.com

En matière de protection de l'environnement

Le symbole sur le produit ou son emballage

indique que ce produit ne peut être traité

comme déchet ménager. Il doit être remis au

point de collecte dédié à cet effet (collecte et

recyclage du matériel électrique et

électronique).

En procédant à la mise au rebut de l'appareil

dans les règles de l’art, nous préservons

l'environnement et notre sécurité, s’assurant

ainsi que les déchets seront traités dans des

conditions optimum.

Pour obtenir plus de détails sur le recyclage de

ce produit, veuillez prendre contact avec les

services de votre commune ou le magasin où

vous avez effectué l'achat.

Matériaux d’emballage

Recyclez les matériaux portant le symbole

Déposez les emballages dans les conteneurs

prévus à cet effet.

Conseils écologiques

Pour préserver l'environnement et utiliser moins

d'eau et d'énergie, suivez ces instructions :

• Réglez un programme sans prélavage pour

laver du linge normalement sale.

• Commencez toujours un programme de lava-

ge avec une charge maximum de linge.

• Si nécessaire, utilisez un détachant quand

vous réglez un programme à basse tempéra-

ture.

• Pour utiliser la quantité correcte de produit

de lavage, vérifiez la dureté de l'eau de votre

système domestique

Description de l'appareil

1 2 3

Plan de travail

Distributeur de produit de lavage

Bandeau de commande

Poignée d'ouverture du hublot

Plaque signalétique

Pieds pour la mise de niveau de l'appareil

Kit de plaques de fixation (405517114)

Disponible auprès de votre magasin vendeur.

Si vous installez l'appareil sur un socle, stabili-

sez l'appareil à l'aide des plaques de fixation.

Suivez les instructions fournies avec le kit.

www.zanussi.com

Bandeau de commande

90°

60°

40°

30°

31 2

5 467

Sélecteur de programme

Touche Départ différé

Voyants de phase du programme :

Voyant de phase du programme de la-

vage

Voyant rinçage plus

Voyant fin de cycle

Touche Départ/Pause

Touche Rapide

Réduction automatique de la vitesse d'es-

sorage

et touche Arrêt cuve pleine

Touche de sélection de la température

Programmes de lavage

Programme

Plage de températures

Type de charge et degré de salissure

Charge maximale, vitesse d'essorage maximale

Coton

90 °C - Froid

Coton blanc et couleurs (normalement sale ou légèrement sale).

6 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

+ Coton avec prélavage

90 °C - Froid

Coton blanc et couleurs (très sale ou normalement sale).

6 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

Eco Coton éco

60 °C - 40 °C

Coton blanc et couleur grand teint. Normalement sale.

6 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

Synthétiques

60 °C - Froid

Vêtements en textiles synthétiques ou mélangés. Normalement

sale.

3 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

Textiles mixtes

Froid

Programme de lavage à froid très économe en énergie. Légère-

ment sale.

3 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

Délicats

40 °C - Froid

Textiles délicats comme les articles en acrylique, viscose et poly-

ester. Normalement sale.

3 kg, 700 tr/min

Laine/Lavage à la main

40 °C - Froid

Laine lavable en machine, lainages lavables à la main et textiles

délicats portant le symbole « Lavage à la main ».

2 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

www.zanussi.com

Programme

Plage de températures

Type de charge et degré de salissure

Charge maximale, vitesse d'essorage maximale

Rinçage

Pour rincer et essorer le linge. Tous textiles.

6 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

Vidange

Pour vidanger l'eau dans le tambour. Tous textiles.

6 kg

Essorage

Pour essorer le linge et vidanger l'eau dans le tambour. Tous texti-

les.

6 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

Repassage facile

60 °C - Froid

Articles en textiles synthétiques. Normalement sale. Évite le frois-

sement du linge.

1 kg, 900 tr/min

Rafraîchir 20

30 °C

Articles en textiles synthétiques ou mélangés. Légèrement sale ou

articles à rafraîchir.

Pour 5 - 6 chemises, 900 tr/min

Mini 30

30 °C

Articles en textiles synthétiques et délicats. Légèrement sale ou

articles à rafraîchir.

3 kg, 700 tr/min

Jeans

60 °C - Froid

Articles en jean ou en jersey. Également pour les articles de cou-

leurs foncées. L'option Rinçage plus est automatiquement activée.

3 kg, 800 tr/min (ZWG680K), 1000 tr/min (ZWG6100K)

1) Programmes standard pour les valeurs de consommation de l'étiquette énergétique

Conformément à la norme 1061/2010, les programmes « coton éco 60 °C » et « coton éco 40 °C » sont

respectivement le « programme standard à 60 °C pour le coton » et le « programme standard à 40 °C pour le

coton ». Ce sont les programmes les plus économes en termes de consommation d'eau et d'électricité pour

laver du linge en coton normalement sale.

La température de l'eau de la phase de lavage peut différer de la température indiquée pour le programme

sélectionné.

2) La vitesse par défaut est 700 tr/min.

Valeurs de consommation

Les données de ce tableau sont approximatives. Les données peuvent différer pour différen-

tes raisons : la quantité et le type de linge, la température ambiante ou de l'eau.

Programmes Charge

(kg)

Consomma-

tion énergéti-

que (kWh)

Consomma-

tion d'eau

(litres)

Durée ap-

proximative

du pro-

gramme

(minutes)

Taux d'hu-

midité res-

tant (%)

ZWG680K

Taux d'hu-

midité res-

tant (%)

ZWG6100K

Coton 60 °C 6 1.05 60 160 66 60

Coton 40 °C 6 0.65 60 140 66 60

Synthétiques

40 °C

3 0.47 45 90 37 37

www.zanussi.com

La page charge ...

Zanussi ZWG6100K Manuel utilisateur

Marque: Zanussi

Modèle: ZWG6100K

Catégorie: Machines à laver

Taper: Manuel utilisateur

Ce manuel convient également à

ZWG680K

Télécharger le PDF

rapport

dans d''autres langues

English: Zanussi ZWG6100K User manual

Zanussi ZWG6100K Manuel utilisateur

Ce manuel convient également à

Zanussi ZWG6100K Manuel utilisateur

dans d''autres langues

Documents connexes