Britax U751905 Mode d'emploi

Catégorie
Poussettes
Taper
Mode d'emploi
B-LIVELY® Stroller
User Guide
Guide de l’utilisateur
Guía del usuario
1
B-LIVELY®, BRITAX®, and CLICK & GOTM are trademarks owned by Britax Child
Safety, Inc. All rights reserved. ©2021 Britax Child Safety, Inc. This product and its
components are subject to change without notice. P06319300_B:02.21
Contents
Safety Information ���������������������������������������������������������������2
Features �������������������������������������������������������������������������������� 4
In The Box ����������������������������������������������������������������������������5
Assembly ������������������������������������������������������������������������������6
Stroller Frame ..................................................................................... 6
Front Wheel ........................................................................................ 6
Rear Wheels ....................................................................................... 7
Canopy ...............................................................................................8
Operation ������������������������������������������������������������������������������9
Using the Stroller ...............................................................................9
Adjusting the Seat ............................................................................ 10
Using the Parking Brake ..................................................................11
Using the Front Wheel Swivel Lock .................................................11
Using the Front Basket Access ........................................................ 11
Canopy Vent .................................................................................... 12
Using the Harness ........................................................................... 12
Securing Your Child ����������������������������������������������������������� 14
Infant Car Seat Mode ��������������������������������������������������������15
Using the Infant Car Seat Receivers ................................................15
Using a Britax Infant Car Seat .........................................................17
Care and Maintenance ������������������������������������������������������18
Warranty �����������������������������������������������������������������������������19
2
Safety Information
Failure to follow all warnings and instructions
could result in SERIOUS INJURY or DEATH.
Read these instructions carefully before using this product�
To ensure proper use, store this user guide in a convenient
place so it can be consulted often�
Never leave child unattended.
Do not use stroller with a child taller than 44 inches (111.8 cm).
Do not use stroller with a child who weighs more than
55 lbs (25 kg). Exceeding this limit may cause stroller to
become unstable.
Avoid serious injury from falling or sliding out. Always use
harness to secure child.
Avoid finger entrapment or injury. Always ensure any child
occupants or bystanders are away from the stroller while
folding or unfolding.
Stroller appropriate from birth, however, Britax recommends
use only with an infant car seat until child has head and
neck control.
Do not overload under-seat storage basket – Maximum
weight in basket is 10 lbs (4.5 kg). Overloading the basket
may cause the stroller to become unstable and tip over.
Do not overload the canopy pockets - Maximum weight in
canopy pockets is 1 lb (0.45 kg). Overloading the canopy
pockets may cause the stroller to become unstable and
tip over.
Do not attach parcels, bags, or other items to the handlebar
or frame of stroller except those recommended by Britax, as
stroller can become unstable and tip over.
3
Always make certain that the stroller is fully open and locked
before use.
Assembly of this stroller must be performed only by
an adult.
Only use Britax approved child restraints, car seats,
accessories and replacement parts with this stroller.
Do not allow children to climb on or play with the stroller.
Do not use the stroller on stairs, escalators, moving
vehicles, or steep inclines. Stroller can tip over.
Stroller is intended for walking speed only. Do not use while
jogging, skating, or any activity other than walking.
Always set the parking brake when stroller is not moving.
Never load or unload the stroller without the parking
brake set.
Do not park on inclines. The parking brake is intended to
park the stroller on flat surfaces only. Parking on inclines
may result in tip over or runaway stroller.
Do not exceed the manufacturers maximum weight limit
when using an infant car seat with this product. See infant
car seat user guide for maximum occupant weight and
other instructions.
All infant car seats MUST be installed rear facing.
Do not modify the stroller or any labels. Doing so voids the
warranty and could lead to a dangerous condition.
Failure to regularly inspect this product and its components
to make sure they are in good condition and good working
order can result in injury. Discontinue use of stroller if
damaged or any parts are missing.
4
Actual product may vary from images.
Features
Canopy
Handle
Canopy
Pockets
Chassis
Lock
Harness
& Buckle
Leg Rest
Front
Wheel
Rear Wheel
Release
Button
Frame
Release
Button
Frame
Release
Strap
Under-Seat
Storage
Basket
Swivel
Lock
Rear
Wheel
Canopy
Vent Flap
5
Actual product may vary from images.
In The Box
B-LIVELY Stroller
Canopy with Pockets
Infant Car Seat Click & Go ReceiversFront Wheel
Rear Wheels
6
Assembly
Stroller Frame
1. Push the release on the chassis lock
and open the frame.
2. Lift handle until frame locks into
upright position.
NOTE: After stroller is upright, push
down on handle to make sure frame is
locked in open position.
Front Wheel
Installing the Front Wheel
1. Slide the front wheel assembly
onto the mounting post at the front of
the stroller.
IMPORTANT: Ensure the swivel
lock is at the top of the assembly
when installing.
2. Pull wheel to ensure that it is secure.
CLICK
CLICK
7
Removing the Front Wheel
1. Press the release buttons at the bottom
of the mounting post and pull the wheel
away from the stroller.
Rear Wheels
Installing the Real Wheels
1. Slide the rear wheel axle into the rear
wheel hub mounting bracket until it
locks into place.
2. Pull wheel to ensure that it is secure.
Removing the Rear Wheels
1. Pull and hold the release lever at the
bottom of the rear wheel hub while
pulling the rear wheel away from
the stroller.
8
Canopy
1. Slide the canopy stay brackets into
the stroller frame mounts until they are
in place.
2. Pull the inner canopy flap over the
back of the stroller and secure the
hook and loop fasteners to the stroller.
3. Drape the outer canopy back flap over
the inner canopy flap and secure the
hook and loop fasteners under each
side of the outer canopy flap to the
stroller seat.
4. Attach the hook and loop fasteners on
each side of the canopy to the inside of
the stroller frame.
9
Operation
Using the Stroller
Folding the Stroller
IMPORTANT: Always apply brake and remove children before folding
the stroller.
1. Press the frame release button.
NOTE: Do not continue to hold the
frame release button once pressed.
2. Remove your hand from stroller frame
and hinge area and lift the frame
release strap in the middle of the seat
until the stroller collapses and the
chassis lock engages.
IMPORTANT:
Before and during use, always make sure the child’s hands and feet
are away from wheels.
Protect stroller when transporting and shipping to prevent damage
to stroller and stroller components. Check closely for damage after
transporting and shipping.
10
Unfolding the Stroller
1. Push the release on the chassis lock
and open the frame.
2. Lift the handle until frame locks into
upright position.
NOTE: After stroller is upright, push
down on handle to make sure frame is
locked in open position.
Adjusting the Seat
1. To recline, pull the recline adjuster
release lever and slide it away from
the seat.
2. To raise, pull both straps apart.
CLICK
11
Using the Parking Brake
1. Press the brake pedal down to lock
the brake.
NOTE: Pressing the brake locks both
back wheels.
2. Lift the brake pedal to release
the brake.
Using the Front Wheel Swivel Lock
1. Press the swivel lock lever down to lock
the front wheel.
2. Lift the swivel lock lever to allow the
wheel to swivel.
Using the Front Basket Access
1. Pull up on the leg rest to access the
under-seat storage basket from the
front of the stroller.
NOTE: Leg rest is not intended to be
used as an adjustable leg rest.
2. Secure the hook and loop fasteners
to close.
12
Using the Harness
IMPORTANT: Shoulder and waist straps separate for care and
maintenance, but should always be used together to secure
your child.
1. Align the tongues on the waist straps
with the retainers of the shoulder
straps and slide through until they lock
into place.
2. Insert the tongues into the buckle
assembly until a click is heard.
CLICK
Canopy Vent
1. Fold the canopy vent forward to
access additional ventilation.
13
Adjusting the Harness
IMPORTANT: The harness can be adjusted to three dierent heights.
Always ensure proper adjustment at or above your child’s shoulders.
1. Pull the harness strap retainer
away from the seat back and turn
90 degrees to feed it through the
harness slot.
2. Push the harness retainer through the
appropriate harness slot to the back of
the seat.
3. Turn the harness retainer to its original
position as shown so it properly retains
the harness.
14
Securing Your Child
1. Release the harness by depressing the
button in the center of the buckle while
pulling the two tongues away from the
buckle assembly.
2. Fasten the harness by inserting the
tongues on the harness straps into the
buckle assembly.
3. Tighten or loosen the harness straps by
sliding the harness adjusters.
15
Infant Car Seat Mode
All infant car seats MUST be installed rear facing.
Always remove the infant car seat receivers when not in use.
Failure to do so may result in injury.
IMPORTANT: For non-Britax infant car seats, an infant car seat
adapter frame must be used. This adapter frame is sold separately at
select retailers and on us.britax.com.
Using the Infant Car Seat Receivers
Attaching the Infant Car Seat Receivers
NOTE: Receivers are marked left and right. Attach each from the
position of the occupant.
1. Set the parking brake.
2. Align the receiver with the mount on
the inside frame of the stroller, then
push down until a click is heard.
Pull up on the receiver to ensure it
is secure.
3. Attach the snap on the receiver strap
to the snap on the stroller seat strap
inside the stroller frame.
4. Repeat for the other side.
CLICK
16
Removing the Infant Car Seat Receivers
1. Unsnap the receiver strap from the
stroller seat snap.
NOTE: Ensure seat strap stays
attached to stroller frame.
2. Press the button on the receiver and
lift upward.
3. Repeat for the other side.
17
Using a Britax Infant Car Seat
Attaching a Britax Infant Car Seat
1. Set the parking brake.
2. Line up the adapter on the infant car
seat with the receivers on the stroller.
3. Press down until locked into place.
4. Lift up on both sides of the infant car
seat to ensure that it is secure.
Removing a Britax Infant Car Seat
Refer to your infant car seat user guide for information on the removal
instructions for your specific model.
18
IMPORTANT: Before each use, check the stroller and its
components to make sure they are in good condition and good
working order.
Parking Brake
Periodically check that the parking brake works
properly and locks both wheels securely.
Clean out any dirt or debris that may prevent
the brake from working.
Frame Wipe the frame with a damp cloth and mild
soap. Use clean, dry cloth or towel to wipe
away excess water and soap.
Fabric and
Harness
Do not machine wash or dry the cover.
Hand wash with cold water and mild soap. Air
dry to prevent shrinking.
Do not iron.
Plastic Parts
Wipe with a damp cloth and mild soap. Use a
clean, dry cloth or towel to wipe away excess
water and soap.
Do not use abrasives, solvents, strong
detergents, or household cleaners. These
products can scratch, discolor, and weaken
plastic or cause corrosion on metal surfaces.
Maintenance If the stroller gets wet, wipe with a clean cloth
or towel to prevent corrosion.
Do not fold the stroller when wet or damp.
Always make sure that the stroller is dry
before storing.
Storage To prevent damage to plastic parts, store away
from extreme heat.
Cover the stroller to prevent dust build-up and
exposure to sunlight.
Do not stack other items on top of the stroller.
Care and Maintenance
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Britax U751905 Mode d'emploi

Catégorie
Poussettes
Taper
Mode d'emploi

dans d''autres langues