Fluance Ai61 Mode d'emploi

Marque: Fluance

Modèle: Ai61

Catégorie: Équipement musical supplémentaire

Taper: Mode d'emploi

Ai61 – Powered 6.5” Bookshelf Speakers

Quick Start Guide v1.2

Fluance Ai61 Quick Start Guide

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit form the apparatus.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in anyway, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. The use of apparatus in moderate climates.

CAUTION

• Minimum 5cm around the apparatus for sufcient ventilation.

• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

• No naked ame sources, such as lighted candles, should be placed on the apparatus.

• Should be drawn to the environmental aspects of the battery disposal.

• To reduce the risk of re or electric shock, do not expose this apparatus to rain or

moisture.

• Battery shall not be exposed to excessive heat such as sunshine, re or the like.

• The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Précautions De Sécurité Importantes a Lire En Premier

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Tenez compte de tous les avertissements.

4. Suivez toutes les instructions.

5. N’utilisez pas cet appareil près de l’eau.

6. Nettoyer uniquement avec un chiffon sec.

7. Ne bloquez aucune ouverture de ventilation. Installez conformément aux instructions du

fabricant.

8. Ne pas installer à proximité de sources de chaleur telles que des radiateurs, des registres de chaleur, des poêles ou d’autres appareils (y compris des amplica-

teurs) qui produisent de la chaleur.

9. Ne détournez pas le but de sécurité de la prise polarisée ou de mise à la terre. Une che polarisée comporte deux pales dont une plus large que l’autre. Une

che de type à la terre a deux lames et une troisième broche de mise à la terre. La lame large ou la troisième broche sont fournies pour votre sécurité. Si la che

fournie ne rentre pas dans votre prise, consultez un électricien pour le remplacement de la sortie obsolète.

10. Protégez le cordon d’alimentation avant d’être piétiné ou pincé en particulier sur les bouchons, les prises de courant et le point où ils sortent de l’appareil.

11. N’utilisez que des acces soires / accessoires spéciés par le fabricant.

12. Utilisez uniquement avec le chariot, le support, le trépied, le support

ou la table spéciés par le fabricant ou vendus avec l’appareil. Lorsqu’un

chariot est utilisé, soyez prudent lorsque vous déplacez la combinaison

panier / appareil pour éviter les blessures causées par le renversement.

13. Débranchez cet appareil pendant les orages ou lorsqu’il n’est pas utilisé pendant de longues périodes.

14. Référer tous les services à un personnel qualié. Un entretien est nécessaire lorsque l’appareil a été endommagé de toute façon, comme le cordon d’alimen-

tation ou la che est endommagé, le liquide a été renversé ou les objets sont tombés dans l’appareil, l’appareil a été exposé à la pluie ou à l’humidité, s’il ne

fonctionne pas normalement ou s’il est tombé.

15. L’utilisation d’appareils dans les climats modérés.

ATTENTION

• 5cm minimale autour de l’appareil pour une aération sufsante.

• il convient que l’aeration ne soit pas gênée par l’obstruction des ouvertures d’aération par des objets tels que journaux, nappes, rideaux, etc...

• il convent de ne pas placer sur l’appareil de sources de ammes nues, telles que des bougies allumées.

• il convent d’attirer l’attention sur les problèmes d’environnement dus à la mise au déchet des piles.

• le mode d’emploi doit stipuler que l’appareil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et de plus qu’aucun objet rempli de

liquide tel que des vases ne doit être placé sur l’appareil.

• Un avertissement selon lequel les batteries (bloc de batteries ou batteries installées) ne doivent pas être exposées à une chaleur excessive telle que celle du

soleil, d’un feu ou d’origine similaire.

• lorsque la prise du RESEAU D’ALIMENTATION ou une prise placée sur l’appareil est utilisée comme appareil de déconnecxion, cet appareil doit demeurer

aisément accessible.

Fluance Ai61 Quick Start Guide

Introduction

Thank you for your purchase of your Fluance product. We hope you enjoy your experience. If

you have any questions please visit us at www.Fluance.com/support.

Fluance believes everyone should experience audio in its truest form, recreating the

performance the way the artist intended. Utilizing only superior components and expert

audio engineering, their products are a testament to the performance that can be achieved

when a passion for music takes center stage. The perfect complement to any audiophile’s

lifestyle, you’ll be enjoying live performances in your home for years to come.

Break-in Period

Our speakers have a Butyl rubber ring surrounding the cone. The break-in period allows

the rubber to loosen and stretch, allowing the cone a larger range of movement, resulting

in better sound reproduction. We recommend 10-12 hours of play at moderate volume to

achieve this.

For additional product information, please consult the manual at: Fluance.com/resources

What’s Included

Quick Start

Guide

Speaker

Wire

LIFETIME

Customer Support

Lifetime

Customer Support

2 Year

Warranty

Ai61 Passive

Speaker

(Left Channel)

Ai61 Active

Speaker

(Right Channel)

VOL +

VOL -

TREBLE BASS

Remote

Control

2x AAA

Batteries

Power

Cable

Fluance Ai61 Quick Start Guide

Front & Back Panel Layout

1. Control Knob

• Volume

• Input Selection

• Power ON/OFF

2. Source LED

• Blue (Solid) - Bluetooth® Paired

• Blue (Flashing) - Bluetooth® Pairing Mode

• Green (Solid) - RCA

• White (Solid) - Optical

• Purple (Solid) - USB

• Red (Solid) - Standby Mode

• Red (Flashing) - Mute

• Red (Flash x2) - Volume Set to Max

• Red (Flash x2) - Bass/Treb Set to -5 or +5

• Source Color: Blue/Green/White/Purple

(Flash x2) - Bass/Treb Set to 0

3. IR Sensor

4. Speaker Input

5. Bluetooth® Reset Pairing

6. USB Input (Audio Playback Only)

7. Optical Input

8. RCA Input

9. Subwoofer Output

10. Left Speaker Output

11. AC Input

12. Power Switch

Remote Control Layout

13. Power ON/OFF

14. Volume UP/DOWN

15. Source

16. Treble UP/DOWN

17. Mute

18. Play/Pause & Bluetooth® Pairing Reset*

*To enable Bluetooth® Pairing Reset, press + hold for 3 seconds.

19. Forward/Back

20. LED Brightness - (100% > 25% > OFF)

21. Bass UP/DOWN

VOL +

VOL -

TREBLE BASS

13 17

15 20

16 21

Passive SpeakerActive Speaker

Active Speaker (Back)

Fluance Ai61 Quick Start Guide

Product Setup

1. Position the speakers with the Active Speaker on the right and the Passive Speaker

on the left.

Passive Speaker Active Speaker

NOTE: If placing the speakers in a cabinet or on a shelf, position the front of the

speakers as close as possible to the front edge of the shelf for optimum audio

performance.

NOTE: The included speaker wire is 8ft. If placing your speakers further than 8ft

apart it is recommended to use standard 18 gauge speaker wire to connect the

speakers over the longer distance.

2. Connect one end of the speaker wire to the binding posts on the back of the

Active Speaker and connect the other end of speaker wire to the binding posts on the

back of the Passive Speaker.

IMPORTANT: Ensure the same wire is connected to the same color binding post on

each speaker.

Loosen the

binding post

Insert speaker

wire through

hole

Tighten the

binding post

3. Connect the power cable to the back of the Active Speaker and set the power switch

to the ON position.

Passive

Speaker

Active

Speaker

Fluance Ai61 Quick Start Guide

EQ Adjustment

Use the Bass/Treble buttons on the Remote to adjust each from -5 to +5.

LED Behavior:

Red (Flash 2x) - Bass/Treble Set to -5 or +5

Source Color (Flash 2x) - Bass/Treble Set to 0

Note: If using a source device, with it’s own EQ settings, ensure it is set to at(0).

RCA Input

1. Connect the RCA cable to your

source device (Turntable,

Smartphone, Computer…).

2. Connect the other end of the RCA

cable to back of the Active Speaker.

4. Adjust volume on Ai61 as well as

source device.

3. Press the Control Knob to select the

RCA input (Green LED).

*RCA to RCA cable not included

Fluance Ai61 Quick Start Guide

Bluetooth® Pairing

1. Press the Control Knob to select the

Bluetooth® input (Blue LED).

3. Use the Remote to control playback

on your source device.

2. Pair to “Fluance Ai61” on your

source device.

4. If your device cannot nd “Fluance

Ai61”, you can reset Bluetooth®

pairing.

Note: Unit will attempt to auto-pair to

the last paired device.

Bluetooth

MY DEVICES

Settings

Fluance Ai61

• Press and hold on the Remote

for 3 seconds to reset Bluetooth®

pairing.

• Press the Bluetooth® Pairing Reset

Button on the back of the unit.

Note: How you access your device’s Bluetooth®

settings may vary from one manufacturer to

another. Maximum line of sight for Bluetooth®

range is 33ft. Obstacles may decrease

transmission distance.

VOL +

VOL -

TREBLE BASS

Note: Adjust Volume on the source

device as well as the Ai61.

Fluance Ai61 Quick Start Guide

Optical Input

1. Connect the Optical cable to your source

device (TV, Computer, Game Console...).

Ensure protective caps are removed from

the ends of the Optical cable.

2. Connect the other end of the Optical

cable to the back of the Active Speaker.

4. Adjust the volume on Ai61 as well

as source device.

3. Press the Control Knob to select the

Optical Input (White LED).

Optical Audio Signal Compatibility

The Ai61 does not support Dolby Digital Audio or DTS Audio. Locate the audio output settings

on your source device and ensure Dolby Digital is turned off. The correct audio output setting is

commonly referred to as PCM or Stereo.

Some TVs also require that audio output be enabled. This setting may be referred to as External

Speakers. Ensure this is selected as your speaker/audio output.

For instructions on a specic device, please consult the device’s user manual.

*Optical cable not included

Fluance Ai61 Quick Start Guide

USB Input

1. Connect the USB cable to your source

device (Laptop, Desktop...).

2. Connect the other end of the USB

cable to the USB C port on the

back of the Active Speaker.

4. Adjust the volume on Ai61 as well as

source device. You may also need to

adjust volume in the different programs

on the source device.

3. Press the Control Knob to select the

USB Input (Purple LED).

USB Audio Output Settings

You may need to enable USB audio output on your source device. Here are the directions for

most Windows® and Apple® Computers.

Windows®: Control Panel > Sound > USB Audio

Apple®: System Preferences > Sound > Output > USB

It is also important to check that any sound enhancements, effects, or EQ settings are disabled

on your source device.

IMPORTANT: The USB input on the Ai61 is for

USB audio playback and not for USB charging.

*USB cable not included

Fluance Ai61 Quick Start Guide

Frequently Asked Questions

What is “auto-pairing” and how does it work?

Auto-pairing is a convenient connection feature included in all Fluance Bluetooth® Speakers.

If the connected Bluetooth®-enabled device leaves the connection range of the Ai61 and

returns at a later time, the device will automatically connect. If the device’s Bluetooth®

function is disabled and then enabled at a later time, the device will automatically connect

as well.

*Note: The Fluance Ai61 will only auto-pair to the last device that it was connected to.

Another device is connected to my Fluance Ai61 and I want to connect my device.

You can reset any Bluetooth® connection by pressing the Bluetooth® Pairing Reset button

on the back of the Active Speaker. You can also press and hold “Play/Pause” on the Remote

for 3 seconds.

How can I increase the volume when using the Ai61 with a turntable?

If turntable audio is too quiet you may need to add a preamplier. Some turntables have built

in preamps which can be turned on or off. The Fluance PA10 preamplier is a great match for

Fluance powered speakers and turntables.

Why is the volume from each input different on the Ai61?

Ensure that any volume and EQ settings on your source devices are set to similar levels. The

different signal types used by each input means they are processed differently by the Ai61.

The Optical Input uses a digital signal while the RCA Input uses an analog signal. These

differences can result in slight variances in the output volume of the Ai61.

Subwoofer Output

IMPORTANT: When a subwoofer cable is connected, the Ai61 will automatically cut frequencies

below 80Hz to optimize performance. The subwoofer cable must be removed to resume full

frequency playback.

1. Connect the Subwoofer cable to your powered subwoofer.

2. Connect the other end of the Subwoofer cable to the back of the Active Speaker.

3. Adjust the volume on the Subwoofer for the best listening experience.

Fluance offers matching subwoofers for the ultimate audio experience. For more information

visit: www.Fluance.com/subwoofer.

DB10

*Subwoofer cable not included

Fluance Ai61 Quick Start Guide

Certification Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:(1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment. This equipment complies with FCC

radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the radiator & your body.

The device has been evaluated to meet general RF exposure requirement. The device can be

used in portable exposure condition without restriction.

IC Warning

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference,

including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

Changes or modications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment. This equipment complies with IC

radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the radiator & your body. This

transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

Warranty Information

Thank you for choosing Fluance! We guarantee your investment in our products is a solid one. High performance components

combined with quality craftsmanship allow us to maintain the highest possible production standards.

All items are guaranteed against defects in materials and craftsmanship. Fluance has outstanding quality control; if something

should go wrong with any of our products, we will repair it free of charge within the warranty period. If the product cannot be

repaired, we will replace the product. If the product has been discontinued, we will replace the product with either the newest

version of said product or current equivalent. In the event that Fluance replaces a product under warranty, the replacement would

only carry the original warranty from the original date of purchase.

Warranty Period

The Fluance products below are warrantied for parts and labor for the stated period from date of original purchase, and are

subject to the terms and conditions of the warranty. Any refurbished products that are discontinued hold a 90 day warranty from

the date of original purchase. Fluance warranties are valid for the original owner and are non-transferable.

Home Audio Passive Speakers: Lifetime Warranty

Active/Powered Speakers: Two Year Warranty

HiFi Turntables: Two Year Warranty

Batteries (For Powered Speakers): One Year Warranty

Warranty Exclusions

• Products purchased from a dealer not authorized by Fluance.

• Products with the serial number defaced, altered, or missing.

• Defects resulting from disaster, accident, abuse, misuse, lightning, power surges, neglect, unauthorized modication or water

damage.

• Defect or damage as a result of repairs performed by a person or party not authorized by Fluance.

• Defects of damage occurring during shipping (claims should be made with the shipping company).

• Defect or damage as a result of connecting a product to an outlet with the incorrect voltage. Voltage converters must be

used where applicable.

• Consumable parts including, but not limited to, batteries, styli, and rubber belts.

To Obtain Warranty Service

Should your product require warranty service, please contact us at www.uance.com/contact or call us at 1-888-617-6863 to set

up a Return Authorization. Products returned without a valid Return Authorization number will be refused.

Fluance products must be returned in their original packaging. Our products are packaged specially to protect them from any

damage during shipping, and without this packaging the return shipment could get damaged.

This warranty does not cover the shipping cost, insurance, or any other incidental charges. Products shipped for warranty service

must be pre-paid by the customer, and Fluance will cover the cost to ship the repaired or replaced product back to the customer.

Thank you for your purchase of this Fluance® product.

We hope you enjoy your experience.

Questions?

Give us a chance to help, we’re just a click away.

Don’t forget to register your product with us!

Fluance.com/registration

Fluance.com/videos

Fluance.com/resources Fluance.com/support Fluance.com/contact

Fluance Ai61 Mode d'emploi

Marque: Fluance

Modèle: Ai61

Catégorie: Équipement musical supplémentaire

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Fluance Ai61 User guide

Fluance Ai61 Mode d'emploi

Fluance Ai61 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents