VTech SN5107 Manuel utilisateur

VTech
Marque
VTech
Modèle
SN5107
Catégorie
Téléphones
Taper
Manuel utilisateur

Ce manuel convient également à

Before use
Add and register a handset
You can add new SN5107 handsets
(purchased separately) to your SN5127/
SN5147 telephone system. Your telephone
system supports a maximum of four
handsets.
Each handset must be registered with
the telephone base before use. When
first purchased, each expansion handset
displays To register HS, see manual.
• Charge the new handset without
interruption for at least 30 minutes before
registering it to the telephone base.
To register a handset to SN5127 telephone
base:
1. Press and hold
PAGE
at the telephone
base for about five seconds until the
visual ringer indicator light turns on.
Release
PAGE
.
2. Press the pound (#) key on the handset.
The handset displays
Registering...
Please wait
to indicate the registration is
in progress.
You hear a confirmation tone when the
registration process completes. It takes up
to 60 seconds to complete the registration.
If registration fails, you hear an error tone,
and the handset display
Registration
failed
. Start again from Step 1 above.
The ENERGY STAR® program
(www.energystar.gov)
recognizes and encourages
the use of products that save
energy and help protect our
environment. We are proud
to mark this product with the
ENERGY STAR® label indicating
it meets the latest energy
efficiency guidelines.
Telephones identified with
this logo have reduced noise
and interference when used
with most T-coil equipped
hearing aids and cochlear
implants. The TIA-1083
Compliant Logo is a trademark
of the Telecommunications
Industry Association. Used
under license.
T
Compatible with
Hearing
Aid T-Coil
TIA-1083
Congratulations
on purchasing your new VTech product.
Before using this telephone, please read
Important safety instructions.
This user’s manual has instructions on how
to set up and register your new handset.
For instructions on using the handset, see
the quick start guide that came with your
telephone base.
You may also view or download the online
user’s manual for a full set of installation
and operation instructions at
www.vtechphones.com. In Canada, visit
www.vtechcanada.com.
What’s in the box
Your telephone package contains the
following items. Save your sales receipt and
original packaging in the event warranty
service is necessary.
To register a handset to SN5147 telephone
base:
1. Press and hold
PAGE/INTERCOM
at the
telephone base for about five seconds
until the visual ringer indicator light turns
on. Release
PAGE/INTERCOM
.
2. Press the pound (#) key on the handset.
The handset displays
Registering...
Please wait
to indicate the registration is
in progress.
You hear a confirmation tone when the
registration process completes. It takes up
to 60 seconds to complete the registration.
If registration fails, you hear an error tone,
and the handset display
Registration
failed
. Start again from Step 1 above.
Deregister handsets
If you want to replace a handset or reassign
the designated handset number of a
registered handset, you must deregister all
the handsets and then individually register
each handset.
If you want to register a handset to another
telephone base, you must deregister all
devices, and then register each handset
individually to the desired telephone base.
To deregister all handsets from the
SN5127/SN5147 telephone base:
1. Press and hold
PAGE
or
PAGE/INTERCOM
on the telephone base
for about five seconds until the visual
ringer indicator light on the telephone
base turns on. Keep holding
PAGE
or
PAGE/INTERCOM
until the visual ringer
indicator light begins to flash. Release
PAGE
or
PAGE/INTERCOM
.
User’s manual
BC
SN5107
Amplified Accessory Handset
with Big Buttons and Display
for use with
VTech SN5127/SN5147
telephone system
Go to www.vtechphones.com
to register your product for enhanced
warranty support and latest VTech
product news.
User’s
manual
Handset overview
1 – Handset earpiece
2 – / SOS
• Press to enhance the clarity and
loudness of your caller’s voice on the
cordless handset earpiece when you
are on a call, or listening to a message
or an announcement.
• Press and hold to call the preset SOS
numbers when the handset is not in
use.
Cautions
• To ensure proper operation for making emergency
calls by using the Audio Assist/SOS button, the
telephone system must be installed according
to the installation instructions in your telephone
system’s user’s manual. To verify that the telephone
system is operating properly and can successfully
make emergency calls to the preset numbers, the
telephone system must be tested immediately
after installation, and periodically thereafter,
according to the setup and operation instructions
in your telephone system’s user’s manual.
• The telephone system cannot make an
emergency call when other equipment
(telephone, answering system, computer modem,
etc.) connected to the same phone line is in use.
• Do not solely rely on the Audio Assist/SOS
button on the cordless handset for getting help
in case of emergency. The functionality of the
SOS emergency call is dependent on the phone
settings and network availability.
3 – LCD display
4 –
• Slide to adjust the listening volume
during a call or message playback.
• Slide to adjust the handset volume
while idle.
caution
• For hearing protection, do not put the
handset near your ear when the telephone
is ringing. Loud ringer sound may damage
your hearing. Adjust the volume to lower
the ringer sound if you find it too loud.
5 –
• Press to call the preset speed dial
memory number 1.
• Press to call the preset speed dial
memory number 2.
• Press to call the preset speed dial
memory number 3.
• Press to call the preset speed dial
memory number 4.
6 –
• Show the menu.
• While in a menu, press to select an
item, or save an entry or setting.
7 –
• Hang up a call.
• Return to the previous menu or idle
mode without making changes.
• Delete digits while predialing.
• Silence the handset ringer temporarily
while the phone is ringing.
• Press and hold to erase the missed
call indicator while the handset is not
in use.
8 –
• Press and hold to review the redial list.
• Press to enter registration mode when
the handset is not registered to any
telephone base.
9 – Microphone
10 –
• Switch to tone dialing temporarily
during a call if you have pulse service.
• While entering numbers,
press and hold to insert a dialing pause.
11 –
• Press and hold to set or dial your
voicemail number.
12 –
• Scroll up while in a menu, or in the
phonebook, caller ID log or redial list.
• Move the cursor to the left when
entering numbers or names.
• Press to show the Call block menu.
• Press to block the incoming call when
the telephone is ringing or during
the call.
• Scroll down while in a menu, or in the
phonebook, caller ID log or redial list.
• Move the cursor to the right when
entering numbers or names.
• Press to make or answer a call using
the speakerphone.
• Switch between the handset
speakerphone and the handset
earpiece during a call.
13 –
• Press to make or answer a call.
• During a call, press to answer an
incoming call when you receive a call
waiting alert.
• During message playback, press
to call back the caller if the caller’s
number is available.
14 –
• Mute the microphone during a call.
• Silence the handset ringer temporarily
while the phone is ringing.
• Delete the displayed entry while
reviewing the phonebook, caller ID
log or redial list.
• Delete digits or characters when
entering numbers or names.
15 – CHARGE light
• On when the handset is charging.
16 – Visual ringer indicator
• Flashes when the handset is ringing.
17 –
• Change the quality of the handset
audio to best suit your hearing.
18 – Speaker
19 – Battery compartment cover
Charger overview
1 – Charging pole
Display icons overview
The battery is low and needs
charging.
The battery is charging.
The battery is fully charged.
The handset speakerphone is
in use.
Handset ringer is off.
New voicemail received from
your telephone service provider.
MUTE The handset microphone is muted.
NEW There are new caller ID log entries.
ANS ON Answering system is on.
There are new messages in the
answering system.
1/13 Number of new/old messages
recorded.
AUDIO
ASSIST The handset Audio Assist®
feature is on.
Audio Assist® is a registered trademark of Advanced
Amercian Telephones.
Install the battery
Install the battery as shown below.
Cautions
• Use only the rechargeable batteries
provided or replacement batteries (model
BT205662).
• Do not use other alkaline, manganese
or Ni-Cd batteries, nor other non-
rechargeable batteries for operating the
cordless handset. They may cause failure
or malfunction of the handset or the
telephone system.
• Charge the batteries provided with this product
only in accordance with the instructions and
limitations specified in this manual.
• If the handset will not be used for a long
time, disconnect and remove the batteries to
prevent possible leakage.
Connect and charge the battery
• Use only the adapter provided.
Connect the charger
Charge the battery
Place the handset in the charger to charge.
Once you have installed the battery, the
handset LCD display indicates the battery
status (see the table below).
• For best performance, keep the handset in
the charger when not in use.
• The battery is fully charged after 12 hours of
continuous charging.
Battery
indicators
Battery
status
Action
The screen
is blank, or
displays Place
in charger
and flashes.
The battery
has no or very
little charge.
The handset
cannot be
used.
Charge
without
interruption
(at least 30
minutes).
The screen
displays
Low battery
and flashes.
The battery
has enough
charge to be
used for a
short time.
Charge
without
interruption
(about 30
minutes).
The screen
displays
HANDSET X.
The battery is
charged.
To keep
the battery
charged,
place it in the
telephone
base or
charger when
not in use.
2. Immediately press
PAGE
or
PAGE/INTERCOM
again while the light is
still flashing.
You hear a confirmation tone when the
deregistration process completes. It
takes about 10 seconds to complete the
deregistration.
If deregistration fails, you need to reset the
system and try again. To reset, unplug the
power and the telephone line cord from
the telephone base. Then, plug the cords
back in again.
Operating range
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance
- which can vary with the locations of the
telephone base and handset, the weather,
and the layout of your home or office.
When the handset is out of range, the
handset displays Out of range or No pwr
at base.
If there is a call while the handset is out of
range, it may not ring, or if it does ring,
the call may not connect well when you
press . Move closer to the
telephone base, then press
to answer the call. If the handset moves out of
range during a telephone conversation, there
may be interference. To improve reception,
move closer to the telephone base.
ECO mode
This power conserving technology reduces
power consumption for optimal battery
performance.
The ECO mode activates automatically
whenever the handset is synchronized with the
telephone base.
General product care
Taking care of your telephone
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the
original packing materials to protect your
telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet.
Do not use the handset outdoors in the rain,
or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For
your own safety, take caution when using
electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
Important safety instructions
When using your telephone equipment, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and injury,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked
on the product.
3. Unplug this product from the wall outlet
before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water such as
near a bath tub, wash bowl, kitchen sink,
laundry tub or a swimming pool, or in a wet
basement or shower.
5. Do not place this product on an unstable
table, shelf, stand or other unstable surfaces.
6. Avoid placing the telephone system in places
with extreme temperature, direct sunlight, or
other electrical devices. Protect your phone
from moisture, dust, corrosive liquids and
fumes.
7. Slots and openings in the back or bottom
of the telephone base and handset are
provided for ventilation. To protect them
from overheating, these openings must not
be blocked by placing the product on a
soft surface such as a bed, sofa or rug. This
product should never be placed near or
over a radiator or heat register. This product
should not be placed in any area where
proper ventilation is not provided.
8. This product should be operated only from
the type of power source indicated on the
marking label. If you are not sure of the type
of power supply in your home or office,
consult your dealer or local power company.
9. Do not allow anything to rest on the power
cord. Do not install this product where the
cord may be walked on.
10.Never push objects of any kind into this
product through the slots in the telephone
base or handset because they may touch
dangerous voltage points or create a short
circuit. Never spill liquid of any kind on the
product.
11.To reduce the risk of electric shock, do not
disassemble this product, but take it to
an authorized service facility. Opening or
removing parts of the telephone base or
handset other than specified access doors
may expose you to dangerous voltages
or other risks. Incorrect reassembling can
cause electric shock when the product is
subsequently used.
12. Do not overload wall outlets and extension
cords.
13. Unplug this product from the wall outlet
and refer servicing to an authorized service
facility under the following conditions:
• When the power supply cord or plug is
damaged or frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to rain or
water.
• If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operation instructions. Improper
adjustment of other controls may result in
damage and often requires extensive work
by an authorized technician to restore the
product to normal operation.
17
18
19
1
2
3
4
5
7
8
6
12
13
14
11
10
15
9
16
1
SN5127 base
SN5147 base
Specifications are subject to change without notice.
© 2019 VTech Communications, Inc.
All rights reserved. 02/19. SN5107-X_CIB_V2.0
Document order number: 91-010986-020-100
cordless handset by radio waves, so there
is a possibility that the cordless telephone
conversations could be intercepted by
radio receiving equipment within range
of the cordless handset. For this reason,
you should not think of cordless telephone
conversations as being as private as those on
corded telephones.
• Electrical power: The telephone base of this
cordless telephone must be connected to a
working electrical outlet. The electrical outlet
should not be controlled by a wall switch.
Calls cannot be made from the cordless
handset if the telephone base is unplugged,
switched off or if the electrical power is
interrupted.
• Potential TV interference: Some cordless
telephones operate at frequencies that may
cause interference to televisions and VCRs.
To minimize or prevent such interference, do
not place the telephone base of the cordless
telephone near or on top of a TV or VCR.
If interference is experienced, moving the
cordless telephone farther away from the
TV or VCR often reduces or eliminates the
interference.
• Rechargeable batteries: Exercise care in
handling batteries in order not to create a
short circuit with conducting material such
as rings, bracelets and keys. The battery or
conductor may overheat and cause harm.
Observe proper polarity between the
battery and the battery charger.
• Nickel-metal hydride rechargeable
batteries: Dispose of these batteries in a
safe manner. Do not burn or puncture the
battery. Like other batteries of this type, if
burned or punctured, they could release
caustic material which could cause injury.
The RBRC® seal
The RBRC® seal on the Ni-MH
battery indicates that VTech
Communications, Inc. is voluntarily
participating in an industry
program to collect and recycle
these batteries at the end of their useful lives,
when taken out of service within the United
States and Canada.
The RBRC® program provides a convenient
alternative to placing used Ni-MH batteries
into the trash or municipal waste, which may be
illegal in your area.
VTech’s participation in RBRC® makes it easy
for you to drop off the spent battery at local
retailers participating in the RBRC® program or
at authorized VTech product service centers.
Please call 1 (800) 8 BATTERY® for information
on Ni-MH battery recycling and disposal bans/
restrictions in your area. VTech’s involvement
in this program is part of its commitment to
protecting our environment and conserving
natural resources.
RBRC® and 1 (800) 8 BATTERY® are registered
trademarks of the Rechargeable Battery
Recycling Corporation.
FCC, ACTA and IC regulations
FCC Part 15
NOTE: This equipment has been tested and
found to comply with the requirements for
a Class B digital device under Part 15 of the
Federal Communications Commission (FCC)
rules. These requirements are intended to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
WARNING: Changes or modifications to this
equipment not expressly approved by the party
responsible for compliance could void the
Then the telephone base is powered up as
normal.
2. Register your handsets back to the
telephone base. Refer to Add and register
a handset.
• If the product has been dropped and the
telephone base and/or handset has been
damaged.
• If the product exhibits a distinct change in
performance.
14.Avoid using a telephone (other than
cordless) during an electrical storm. There is
a remote risk of electric shock from lightning.
15. Do not use the telephone to report a gas
leak in the vicinity of the leak. Under certain
circumstances, a spark may be created when
the adapter is plugged into the power
outlet, or when the handset is replaced in
its cradle. This is a common event associated
with the closing of any electrical circuit. The
user should not plug the phone into a power
outlet, and should not put a charged handset
into the cradle, if the phone is located in
an environment containing concentrations
of flammable or flame-supporting gases,
unless there is adequate ventilation. A spark
in such an environment could create a fire or
explosion. Such environments might include:
medical use of oxygen without adequate
ventilation; industrial gases (cleaning
solvents; gasoline vapors; etc.); a leak of
natural gas; etc.
16.Only put the handset of your telephone next
to your ear when it is in normal talk mode.
17.The power adapter is intended to be
correctly oriented in a vertical or floor mount
position. The prongs are not designed to
hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
18.For pluggable equipment, the socket-outlet
shall be installed near the equipment and
shall be easily accessible.
19.CAUTION: Use only the batteries indicated in
this manual. There may be a risk of explosion
if a wrong type of battery is used for the
handset. Use only the supplied rechargeable
batteries for the handset. Do not dispose of
batteries in a fire. They may explode.
20.Use only the adapter included with this
product. Incorrect adapter polarity or voltage
can seriously damage the product.
Charger power adapter: Output:
6V DC @ 400mA.
SAVE THESE INSTRUCTIONS
Battery
• Use only the batteries provided or
equivalent. To order a replacement, visit our
website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call
1 (800) 267-7377.
• Do not dispose of the battery in a fire. Check
with local waste management codes for
special disposal instructions.
• Do not open or mutilate the battery.
Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
• Exercise care in handling batteries in order
not to create a short circuit with conductive
materials.
• Charge the battery provided with this
product only in accordance with the
instructions and limitations specified in this
manual.
Precautions for users of implanted cardiac
pacemakers
Cardiac pacemakers (applies only to digital
cordless telephones):
Wireless Technology Research, LLC (WTR),
an independent research entity, led a
multidisciplinary evaluation of the interference
between portable wireless telephones and
implanted cardiac pacemakers. Supported by
the U.S. Food and Drug Administration, WTR
recommends to physicians that:
Pacemaker patients
• Should keep wireless telephones at least six
inches from the pacemaker.
• Should NOT place wireless telephones
directly over the pacemaker, such as in a
breast pocket, when it is turned ON.
• Should use the wireless telephone at the ear
opposite the pacemaker.
WTR’s evaluation did not identify any risk
to bystanders with pacemakers from other
persons using wireless telephones.
About cordless telephones
• Privacy: The same features that make a
cordless telephone convenient create some
limitations. Telephone calls are transmitted
between the telephone base and the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation. Privacy
of communications may not be ensured when
using this telephone.
To ensure safety of users, the FCC has
established criteria for the amount of radio
frequency energy that can be safely absorbed
by a user or bystander according to the
intended usage of the product. This product
has been tested and found to comply with
the FCC criteria. The handset may be safely
held against the ear of the user. The telephone
base shall be installed and used such that parts
of the user’s body other than the hands are
maintained at a distance of approximately 20 cm
(8 inches) or more.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B).
FCC Part 68 and ACTA
This equipment complies with Part 68 of the
FCC rules and with technical requirements
adopted by the Administrative Council for
Terminal Attachments (ACTA). The label on the
back or bottom of this equipment contains,
among other things, a product identifier in
the format US:AAAEQ##TXXXX. This identifier
must be provided to your telephone service
provider upon request.
The plug and jack used to connect this
equipment to premises wiring and the
telephone network must comply with
applicable Part 68 rules and technical
requirements adopted by ACTA. A compliant
telephone cord and modular plug is provided
with this product. It is designed to be
connected to a compatible modular jack that
is also compliant. An RJ11 jack should normally
be used for connecting to a single line and
an RJ14 jack for two lines. See the installation
instructions in the user’s manual.
The Ringer Equivalence Number (REN) is
used to determine how many devices you
may connect to your telephone line and still
have them ring when you are called. The
REN for this product is encoded as the 6th
and 7th characters following the US: in the
product identifier (e.g., if ## is 03, the REN
is 0.3). In most, but not all areas, the sum of
all RENs should be five (5.0) or less. For more
information, please contact your telephone
service provider.
This equipment must not be used with Party
Lines. If you have specially wired alarm dialing
equipment connected to your telephone
line, ensure the connection of this equipment
does not disable your alarm equipment. If you
have questions about what will disable alarm
equipment, consult your telephone service
provider or a qualified installer.
If this equipment is malfunctioning, it must be
unplugged from the modular jack until the
problem has been corrected. Repairs to this
telephone equipment can only be made by the
manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined
under the Limited warranty.
If this equipment is causing harm to the
telephone network, the telephone service
provider may temporarily discontinue your
telephone service. The telephone service
provider is required to notify you before
interrupting service. If advance notice is
not practical, you will be notified as soon as
possible. You will be given the opportunity to
correct the problem and the telephone service
provider is required to inform you of your right
to file a complaint with the FCC. Your telephone
service provider may make changes in its
facilities, equipment, operation, or procedures
that could affect the proper functioning of
this product. The telephone service provider
is required to notify you if such changes are
planned.
If this product is equipped with a corded or
cordless handset, it is hearing aid compatible.
If this product has memory dialing locations,
you may choose to store emergency telephone
numbers (e.g., police, fire, medical) in these
locations. If you do store or test emergency
numbers, please:
Remain on the line and briefly explain the
reason for the call before hanging up.
Perform such activities in off-peak hours, such
as early morning or late evening.
Industry Canada
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
Privacy of communications may not be ensured
when using this telephone.
The term ‘’IC:‘’ before the certification/
registration number only signifies that the
Industry Canada technical specifications were
met.
This product meets the applicable Innovation,
Science and Economic Development Canada
technical specifications.
California Energy Commission
battery
charging testing
instructions
This telephone is set up to comply with the
energy-conserving standards right out of
the box. These instructions are intended for
California Energy Commission (CEC) compliance
testing only. When the CEC battery charging
testing mode is activated, all cordless handset
functions, except battery charging, will be
disabled.
To activate the CEC battery charging testing
mode:
1. Unplug the telephone base power
adapter from the power outlet. Make sure
all handsets are plugged with charged
batteries before proceeding.
2. While you press and hold PAGE or
PAGE/INTERCOM on the telephone base,
plug the telephone base power adapter
back to the power outlet.
3. After about 20 seconds, when the visual
ringer indicator light on the telephone base
turns on. Keep pressing PAGE or
PAGE/INTERCOM until the visual ringer
indicator light starts flashing, release PAGE
or PAGE/INTERCOM and then press it again
within 2 seconds.
• When the phone successfully enters the CEC
battery charging testing mode, the visual
ringer indicator light turns off and all handsets
display To register HS, see manual.
• When the phone fails to enter this mode,
repeat Step 1 through Step 3 above.
To deactivate the CEC battery charging testing
mode:
1. Unplug the telephone base power adapter
from the power outlet, then plug it back in.
For C-UL compliance only
Mesures de sécurité importantes
Afin de réduire les risques d’incendie, de
blessures corporelles ou d’électrocution, suivez
toujours ces mesures préventives de base
lorsque vous utilisez votre téléphone :
1. Lisez et comprenez bien toutes les
instructions.
2. Observez toutes les instructions et mises en
garde inscrites sur l’appareil.
3. Débranchez ce téléphone de la prise murale
avant de le nettoyer. N’utilisez pas de
nettoyeurs liquides ni en aérosol. N’utilisez
qu’un chiffon doux et légèrement humecté.
4. N’utilisez pas ce produit près de l’eau, tel
que près d’un bain, d’un lavabo, d’un évier
de cuisine, d’un bac de lavage ou d’une
piscine, ou dans un sous-sol humide ou sous
la douche.
5. Ne déposez pas ce téléphone sur un chariot,
support ou table chancelants. L’appareil
pourrait tomber et être sérieusement
endommagé.
6. Évitez d’installer le système téléphonique
dans les endroits soumis à une température
extrême, à la lumière directe du soleil ou
à proximité immédiate d’autres appareils
électriques ou électroniques. Protégez votre
téléphone contre les sources d’humidité,
la poussière, les vapeurs et les liquides
corrosifs.
7. Le boîtier de l’appareil est doté de fentes et
d’ouvertures d’aération situées à l’arrière ou
en dessous. Afin d’empêcher la surchauffe,
ces ouvertures ne doivent pas être obstruées
en plaçant l’appareil sur un lit, divan, tapis
ou autre surface similaires. Ne placez pas
cet appareil à proximité d’un élément de
chauffage ni d’une plinthe électrique. De
plus, ne l’installez pas dans une unité murale
ou un cabinet fermé qui ne possède pas
d’aération adéquate.
8. Ne faites fonctionner cet appareil qu’avec le
type d’alimentation indiqué sur les étiquettes
de l’appareil. Si vous ne connaissez pas le
voltage de votre maison, consultez votre
marchand ou votre fournisseur d’électricité.
9. Ne déposez rien sur le cordon
d’alimentation. Installez cet appareil dans un
endroit sécuritaire, là où personne ne pourra
trébucher sur la ligne d’alimentation ni le
cordon téléphonique modulaire.
10.N’insérez jamais d’objets à travers les
fentes et ouvertures de cet appareil, car ils
pourraient toucher à des points de tension
dangereux ou court-circuiter des pièces,
ce qui constituerait un risque d’incendie ou
d’électrocution. N’échappez pas de liquides
dans l’appareil.
11. Afin de réduire les risques d’électrocution,
ne démontez pas l’appareil, mais apportez-le
plutôt à un centre de service qualifié s’il doit
être réparé. En enlevant le couvercle, vous
vous exposez à des tensions dangereuses
ou autres dangers similaires. Un remontage
inadéquat peut être à l’origine d’une
électrocution lors d’une utilisation ultérieure
de l’appareil. Débranchez l’appareil avant de
procéder au nettoyage. Utilisez un chiffon
humide et doux.
12. Ne surchargez pas les prises de courant et les
rallonges.
13. Débranchez cet appareil de la prise
de courant et communiquez avec le
département de service à la clientèle de
VTech dans les cas suivants :
• Lorsque le cordon d’alimentation est
endommagé ou écorché.
• Si du liquide a été échappé dans l’appareil.
• Si l’appareil a été exposé à une source
d’humidité telle que la pluie ou l’eau.
• Si le produit ne fonctionne pas
normalement en respectant les instructions
de fonctionnement. Réglez uniquement
les commandes indiquées dans le les
instructions de fonctionnement. Les
réglages incorrects des autres commandes
pourraient provoquer un dommage qui
pourrait exiger un travail exhaustif de
la part d’un technicien autorisé afin de
rétablir le fonctionnement normal de
l’appareil.
• Si le produit a été échappé et que le socle
et/ou le combiné a été endommagé.
• Si le produit affiche une nette diminution
de sa performance.
14.Évitez d’utiliser un téléphone (autre qu’un
sans fil) pendant un orage. Les éclairs
peuvent être à l’origine d’une électrocution.
15.N’utilisez pas le téléphone pour rapporter
une fuite de gaz à proximité de la fuite. En
certaines circonstances, une flammèche
pourrait être provoquée lorsque l’adaptateur
est branché à une prise de courant, ou
lorsque le combiné est déposé sur le socle.
Ceci est un événement commun associé à la
fermeture d’un circuit électrique. L’utilisateur
ne devrait pas brancher le téléphone à
une prise de courant, et ne devrait pas
déposer le combiné chargé sur le socle,
si le téléphone se trouve à proximité d’un
endroit comportant des concentrations de
gaz inflammables, à moins que la ventilation
soit adéquate. Une flammèche dans un tel
endroit pourrait provoquer un incendie
ou une explosion. De tels environnements
peuvent comprendre: des endroits où l’on
utilise de l’oxygène médical sans ventilation
adéquate; des gaz industriels (dissolvants de
nettoyage, des vapeurs d’essence, etc.); une
fuite de gaz naturel, etc.
16.Ne placez que le combiné de votre
téléphone près de votre oreille lorsqu’en
mode de conversation.
17.Ces adaptateurs ont été conçus pour être
orientés en position verticale ou montés au
sol. Les broches ne sont pas conçues pour
maintenir l’adaptateur en place si celui-ci est
barnché dans une prise au plafond ou sous
une table/ armoire.
18.Pour le MATERIEL RACCORDE PAR PRISE DE
COURANT, le socle de prise de courant doit
etre installe a proximite du materiel et doit
etre aisement accessible.
19.MISE EN GARDE: Il peut y avoir un risque
d’explosion si vous utilisez le mauvais type
de piles pour le téléphone. N’utilisez que
les piles rechargeable inclus. N’incinérez
pas les piles. Celles-ci risqueraient
d’exploser.
20.N’utilisez que les adaptateurs inclus avec
ce produit. L’utilisation d’un adaptateur
dont la polarité ou la tension serait
inadéquate risque d’endommager
sérieusement le produit et mettre votre
sécurité en péril.
Adaptateur de chargeur:
Sortie : 6 V CC 400 mA
CONSERVEZ CES INSTRUCTIONS
Pile
• N’utilisez que la pile incluse ou l’équivalent.
Pour commander une pile de recharge,
visitez notre site Web au
www.vtechphones.com ou composez le
1-800-595-9511. Au Canada, visitez le
www.vtechcanada.com ou composez le
1-800-267-7377.
• Ne jetez pas la pile au feu. Vérifiez les
instructions spécifiques de mise aux rebus
auprès des autorités locales.
• N’ouvrez pas et ne mutilez pas la pile.
L’électrolyte qui s’en échapperait est corrosif
et pourrait causer des brûlures ou des
blessures aux yeux ou à la peau. L’électrolyte
est toxique si avalé.
• Soyez prudents lorsque vous manipulez
les piles afin d’éviter les courts-circuits
provoqués par des matériaux conducteurs.
• Rechargez la pile incluse avec cet appareil,
selon les instructions et limites spécifiées
dans ce guide d’utilisation.
Stimulateurs cardiaques implantés dans
l’organisme
Les simulateurs cardiaques (s’applique
uniquement aux téléphones numériques sans fil) :
L’organisme ‘Wireless Technology Research, LLC
(WTR)’, une firme de recherche indépendante,
a mené une évaluation pluridisciplinaire
des interférences entre les téléphones sans
fil portatifs et les stimulateurs cardiaques
implantés dans l’organisme. Appuyée par
l’Administration des aliments et drogues (FDA)
des États-Unis, la firme WTR recommande aux
médecins :
Avis aux détenteurs de stimulateurs
cardiaques
• Ils doivent tenir le téléphone sans fil à
une distance d’au moins six pouces du
stimulateur cardiaque.
• Ils ne doivent PAS placer le téléphone sans
fil directement sur le stimulateur cardiaque,
tel que dans une poche de chemise, lorsque
celui-ci est en marche.
• Ils doivent utiliser le téléphone sans fil en
l’appuyant sur l’oreille qui se trouve dans la
direction opposée au stimulateur cardiaque.
L’étude effectuée par l’organisme WRS n’a
pas identifié de risque pour les détenteurs de
simulateurs cardiaques causés par les gens qui
utilisent un téléphone sans fil à proximité de
ceux-ci.
À propos des téléphones sans fil
• Confidentialité : Les mêmes caractéristiques
qui constituent des avantages pour les
téléphones sans fil affichent également
des restrictions. Les appels téléphoniques
sont transmis entre le combiné sans fil et
le socle par le biais d’ondes radio ; il y a
donc la possibilité que vos conversations
téléphoniques sans fil soient interceptées
par des équipements de réception radio
se trouvant dans la portée du combiné sans
fil. Pour cette raison, vous ne devez pas
percevoir les communications téléphoniques
sans fil comme étant aussi confidentielles
que celles des téléphones à cordons.
• Alimentation électrique : Le socle de ce
téléphone sans fil doit être branché à une
prise électrique fonctionnelle. La prise
électrique ne doit pas être contrôlée par un
interrupteur mural. Les appels ne pourront
pas être effectués du combiné sans fil si le
socle est débranché ou mis hors tension ou si
le courant est coupé.
• Possibilité d’interférences aux téléviseurs :
Certains téléphones sans fil fonctionnent
sur des fréquences pouvant causer des
interférences aux téléviseurs et aux
magnétoscopes. Pour réduire ou prévenir de
telles interférences, ne placez pas le socle du
téléphone sans fil près ou sur un téléviseur
ou magnétoscope. S’il y a présence de
parasites, il est conseillé d’éloigner le
téléphone sans fil du téléviseur ou du
magnétoscope afin de réduire possiblement
les interférences.
• Piles rechargeables : Manipulez les piles
avec soin afin de ne pas les court-circuiter
avec des bagues, bracelets ou clés. Les
piles ou le conducteur peut surchauffer et
causer des blessures. Respectez la polarité
adéquate entre la pile et le chargeur.
• Les bloc-piles rechargeables à l’hydrure
métallique de nickel : Jetez ces blocs-piles
de manière écologique et sécuritaire. Ne les
incinérez pas et ne les percez pas. Tel que
les autres piles de ce type, elles pourraient
dégager une matière toxique qui peut
causer des blessures corporelles si elles sont
brûlées ou percées.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product
warrants to the holder of a valid proof of
purchase (“Consumer” or “you”) that the
Product and all accessories provided in the
sales package (“Product”) are free from defects
in material and workmanship, pursuant to the
following terms and conditions, when installed
and used normally and in accordance with the
Product operating instructions. This limited
warranty extends only to the Consumer for
Products purchased and used in the United
States of America and Canada.
What will VTech do if the Product is not free
from defects in materials and workmanship
during the limited warranty period (“Materially
Defective Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace
the Product, we may replace it with a new or
refurbished Product of the same or similar
design. We will retain defective parts, modules,
or equipment. Repair or replacement of the
Product, at VTech’s option, is your exclusive
remedy. VTech will return the repaired or
replacement Products to you in working
condition. You should expect the repair or
replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product
extends for ONE (1) YEAR from the date
of purchase. If VTech repairs or replaces a
Materially Defective Product under the terms of
this limited warranty, this limited warranty also
applies to the repaired or replacement Product
for a period of either (a) 90 days from the date
the repaired or replacement Product is shipped
to you or (b) the time remaining on the original
one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or
other liquid intrusion;
2. Product that has been damaged due to repair,
alteration or modification by anyone other
than an authorized service representative of
VTech;
3. Product to the extent that the problem
experienced is caused by signal conditions,
network reliability, or cable or antenna
systems;
4. Product to the extent that the problem is
caused by use with non-VTech accessories;
5. Product whose warranty/quality stickers,
product serial number plates or electronic
serial numbers have been removed, altered or
rendered illegible;
6. Product purchased, used, serviced, or shipped
for repair from outside the United States of
America or Canada, or used for commercial
or institutional purposes (including but not
limited to Products used for rental purposes);
7. Product returned without a valid proof of
purchase (see item 2 below); or
8. Charges for installation or set up, adjustment
of customer controls, and installation or repair
of systems outside the unit.
How do you get warranty service?
To obtain warranty service in the USA, please visit
our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
NOTE: Before calling for service, please review
the user’s manual - a check of the Product’s
controls and features may save you a service call.
Except as provided by applicable law, you assume
the risk of loss or damage during transit and
transportation and are responsible for delivery
or handling charges incurred in the transport
of the Product(s) to the service location. VTech
will return repaired or replaced Product under
this limited warranty. Transportation, delivery or
handling charges are prepaid. VTech assumes no
risk for damage or loss of the Product in transit. If
the Product failure is not covered by this limited
warranty, or proof of purchase does not meet the
terms of this limited warranty, VTech will notify
you and will request that you authorize the cost of
repair prior to any further repair activity. You must
pay for the cost of repair and return shipping costs
for the repair of Products that are not covered by
this limited warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and
contents including the Product to the VTech
service location along with a description of the
malfunction or difficulty; and
2. Include a “valid proof of purchase” (sales
receipt) identifying the Product purchased
(Product model) and the date of purchase or
receipt; and
3. Provide your name, complete and correct
mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech.
It supersedes all other written or oral
communications related to this Product. VTech
provides no other warranties for this Product.
The warranty exclusively describes all of VTech’s
responsibilities regarding the Product. There
are no other express warranties. No one is
authorized to make modifications to this limited
warranty and you should not rely on any such
modification.
State/Provincial Law Rights: This warranty gives
you specific legal rights, and you may also have
other rights, which vary from state to state or
province to province.
Limitations: Implied warranties, including
those of fitness for a particular purpose and
merchantability (an unwritten warranty that the
Product is fit for ordinary use) are limited to one
year from the date of purchase. Some states/
provinces do not allow limitations on how long
an implied warranty lasts, so the above limitation
may not apply to you. In no event shall VTech
be liable for any indirect, special, incidental,
consequential, or similar damages (including,
but not limited to lost profits or revenue,
inability to use the Product or other associated
equipment, the cost of substitute equipment,
and claims by third parties) resulting from the use
of this Product. Some states/provinces do not
allow the exclusion or limitation of incidental or
consequential damages, so the above limitation
or exclusion may not apply to you.
Please retain your original sales receipt as
proof of purchase.
Technical specifications
Frequency
control
Crystal controlled PLL
synthesizer
Transmit
frequency
1921.536-1928.448 MHz
Channels 5
Nominal
effective
range
Maximum power allowed by
FCC and IC. Actual operating
range may vary according to
environmental conditions at the
time of use.
Power
requirements
Handset: 1.2V 500mAh, 3 x AAA
Ni-MH battery
Charger: 6V DC @ 400mA
Memory Handset phonebook:
50 memory locations;
up to 30 digits and 15 characters
Handset caller ID log:
50 memory locations;
up to 24 digits and 15 characters
Handset call block: 1000 entries
Audio Assist® is a registered trademark of Advanced
Amercian Telephones.
  • Page 1 1
  • Page 2 2

VTech SN5107 Manuel utilisateur

VTech
Marque
VTech
Modèle
SN5107
Catégorie
Téléphones
Taper
Manuel utilisateur
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes