Midea MLH27N4AWWC Manuel utilisateur

Front Loading Washer

Power supply: 120V

Circuit: 12-amp branch

Warning:

Before using this product,

please read this manual

carefully and keep it for future

reference. The design and

speciﬁcations are subject to

change without prior notice

for product improvement.

Consult with your dealer or

manufacturer for details.

en

USER MANUAL &

INSTALLATION

INSTRUCTIONS

www.midea.com

FRONT LOADING WASHER SAFETY ............................................. 3

Proper Installation ..................................................................................... 5

When Not in Use ........................................................................................ 5

OPERATION REQUIREMENTS ...........................................................6

Location of Your Washer ........................................................... 6

Electrical Requirements .......................................................................... 6

Water Supply Requirements ................................................................. 7

Drain Requirements .................................................................................. 7

INSTALLATION INSTRUCTIONS .......................................................8

Before You Begin ....................................................................................... 8

Tools Required ............................................................................................ 8

Parts Required (Obtain Locally) .......................................................... 9

Parts Supplied ............................................................................................. 9

Washer Dimensions .................................................................................. 9

Unpacking the Washer ............................................................ 10

Installing the Washer ................................................................ 11

WASHER USE ..................................................................................... 13

Control Panel .............................................................................................. 13

Operating Instructions ............................................................................14

Loading and Using the Washer ...........................................................16

Washer

Safety Operation

Requirements Installation

Instructions TroubleshootingWasher CareWasher Use

CAUTION

WARNING

This symbol indicates the possibility of death or serious

injury.

This symbol indicates the possibility of injury or damage to

property.

WARNING

This symbol indicates the possibility of dangerous voltage

constituting a risk of electrical shock is present that could

result in death or serious injury.

FRONT LOADING WASHER CARE ............................................... 17

Cleaning .......................................................................................................17

Moving, Storage and Long Vacations ..............................................24

BEFORE YOU CALL FOR SERVICE ................................................ 19

Error Codes ................................................................................................ 24

WARRANTY ...................................................................................... 25

PRODUCT REGISTRATION ............................................................. 26

FRONT LOADING WASHER SAFETY

YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT

To prevent injury to the user or other people and property damage, the

instructions shown here must be followed. Incorrect operation due to not

following instructions may cause harm or damage, including death.

The level of risk is shown by the following indications.

3

Washer

Safety Operation

Requirements Installation

Instructions TroubleshootingWasher CareWasher Use

WARNING

To reduce the risk of death, ﬁre, explosion, electric shock, or injury to

persons when using your appliance, follow basic precautions, including

the following:

• Read the instruction manual before using the appliance.

• DO NOT wash or dry articles that have been previously cleaned in,

washed in, soaked in or spotted with gasoline, dry-cleaning solvents,

or other ﬂammable or explosive substances, as they give o vapors

that could ignite or explode.

• DO NOT add gasoline, dry-cleaning solvents, or other ﬂammable or

explosive substances to the wash water. These substances give o

vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be produced in a

hot-water system that has not been used for 2 weeks or more.

HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not

been used for such a period, before using a washing machine, turn

on all hot-water faucets and let the water ﬂow from each for several

minutes. This will release any accumulated hydrogen gas. As the gas

is ﬂammable, DO NOT smoke or use an open ﬂame during this time.

• DO NOT allow children to play on or in this appliance. Close

supervision of children is necessary when this appliance is used near

children. Before the washer is removed from service or discarded,

remove the door or lid. Failure to follow these instructions may result

in death or injury to persons.

• DO NOT reach into the appliance if the drum or other components

are moving to prevent accidental entanglement.

• DO NOT install or store this appliance where it will be exposed to the

weather.

• DO NOT tamper with controls, repair or replace any part of this

appliance or attempt any servicing unless speciﬁcally recommended

in the user maintenance instructions or in published user repair

instructions that you understand and have the skills to carry out.

• Keep the area around your appliance clean and dry to reduce the

possibility of slipping.

• DO NOT operate this appliance if it is damaged, malfunctioning,

partially disassembled, or has missing or broken parts including a

damaged cord or plug.

• Unplug the appliance or turn o the circuit breaker before servicing.

Pressing the Power button DOES NOT disconnect power.

• See “Electrical Requirements” located in the Installation Instructions

for grounding instructions. This appliance is not intended for use

by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children should be

supervised to ensure that they do not play with appliance.

4

IMPORTANT SAFETY INSTRUCTIONS

Washer

Safety Operation

Requirements Installation

Instructions TroubleshootingWasher CareWasher Use

• If the supply cord is damaged, it must be replaced by the

manufacture, its service agent or similarly qualiﬁed persons in order to

avoid a hazard.

• The new hose-sets bought from the retailer where the product was

purchased are to be used and that old hose-sets should not be

reused.

• This appliance is for indoor use only.

SAVE THESE INSTRUCTIONS

• This appliance must be properly installed and located in accordance

with the Installation Instructions before it is used. Ensure the cold

water hose is connected to the “C” valve.

• Install or store where it will not be exposed to temperatures below

freezing or exposed to the weather, which could cause permanent

damage and invalidate the warranty.

Properly ground washer to conform with all governing codes and

ordinances. Follow details in installation instructions.

WARNING

Electrical Shock Hazard

• Plug into a grounded 3 prong outlet.

• Do not remove the ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Failure to do so can result in death, ﬁre or

electrical shock.

WARNING: Cancer and Reproductive Harm

-www.P65Warnings.ca.gov.

PROPER INSTALLATION

WHEN NOT IN USE

Turn o water faucets to minimize leakage if a break or rupture should

occur. Check the condition of the ﬁll hoses; We recommend changing the

hoses every 5 years.

State of California Proposition 65 Warnings:

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY

5

Installation

Instructions TroubleshootingWasher CareWasher Use

Washer

Safety Operation

Requirements

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK AND PERSONAL

INJURY:

• DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG

WITH THIS APPLIANCE. Washer must be electrically grounded in

accordance with local codes and ordinances.

OPERATION REQUIREMENTS

LOCATION OF YOUR FRONT LOADING WASHER

DO NOT INSTALL THE WASHER:

1. In an area exposed to dripping water or outside weather conditions.

The ambient temperature should never be below 60°F (15.6°C) for

proper washer operation.

2. In an area where it will come in contact with curtains or drapes.

3. On carpet. The ﬂoor MUST be a hard surface with a maximum slope

of 1/4” per foot (.6 cm per 30 cm). To make sure the washer does not

vibrate or move, you may have to reinforce the ﬂoor.

NOTE: If ﬂoor is in poor condition, use 3/4” impregnated plywood sheet

solidly attached to the existing ﬂoor covering.

IMPORTANT: MINIMUM INSTALLATION CLEARANCES

• When installed in alcove: Top and Sides = 0” (0 cm), Back = 3” (7.6 cm)

• When installed in closet: Top and Sides = 1” (25 mm), Front = 2” (5 cm),

Back = 3” (7.6 cm)

• Closet door ventilation openings required: 2 louvers each 60 square in.

(387 cm), located 3” (7.6 cm) from top and bottom of door

ELECTRICAL REQUIREMENTS

Read these instructions completely and carefully.

CIRCUIT - Individual, properly polarized and grounded 15-amp branch

circuit fused with 15-amp time -delay fuse or circuit breaker.

POWER SUPPLY - 2-wire with ground, 120V~, single-phase, 60Hz,

alternating current.

OUTLET RECEPTACLE - Properly grounded receptacle located so

the power supply cord is accessible when the washer is in an installed

position.

6

Installation

Instructions TroubleshootingWasher CareWasher Use

Min 60

Max 100

B

Min.60cm

Max.100cm

C

28

" min.

(710 mm)

D

Washer

Safety Operation

Requirements

Min 60

Max 100

B

Min.60cm

28” min.

(710 mm)

GROUNDING REQUIREMENTS

Improper connection of the equipment grounding conductor can result in a

risk of electrical shock. Check with a licensed electrician if you are in doubt

as to whether the appliance is properly grounded.

1. The appliance MUST be grounded. In the event of malfunction or

breakdown, grounding will reduce the risk of electrical shock by

providing a path of least resistance for electrical current.

2. Since your appliance is equipped with a power supply cord having an

equipment-grounding conductor and a grounding plug, the plug MUST

be plugged into an appropriate, copper-wired receptacle that is properly

installed and grounded in accordance with all local codes. If in doubt,

call a licensed electrician. DO NOT cut o or alter the grounding prong

on the power supply cord. In situations where a two-slot receptacle is

present, it is the owner’s responsibility to have a licensed electrician

replace it with a properly grounded grounding-type receptacle.

WATER SUPPLY REQUIREMENTS

Hot and cold water faucet MUST be installed within 42” (107 cm) of your

washer’s water inlet. The faucet MUST be 3/4” (1.9 cm) garden hose-type

so inlet hoses can be connected. Water pressure MUST be between 20 and

100 psi. Your water department can advise you of your water pressure.

DRAIN REQUIREMENTS

1. Drain capable of eliminating 64.3 L per

minute.

2. A standpipe diameter of 1-1/4” (3.18 cm)

minimum.

3. The standpipe height above the ﬂoor

should be: Minimum height: 24” (61 cm)

Maximum height: 40” (100 cm)

4. to drain into a laundry tub; tub needs to

be min 20 gal (76 L), top of the laundry

tub must be min 24” (61 cm)

5. Floor drain requires a min 28” siphon

drain (710 mm) from the bottom of the

unit

C

D

7

Max.100cm

TroubleshootingWasher CareWasher Use

Washer

Safety Operation

Requirements Installation

Instructions

• IMPORTANT - Save these instructions for local

inspector’s use.

• IMPORTANT - Observe all governing codes and

ordinances.

• Note to Installer - Be sure to leave these instructions with the

Consumer.

• Note to Consumer - Keep these instructions for future reference.

• Skill level - Installation of this appliance requires basic mechanical

and electrical skills.

• Completion time - 1-3 hours.

• Proper installation is the responsibility of the installer.

• Product failure due to improper installation is not covered under the

Warranty.

WARNING

• This appliance must be properly grounded and installed as described

in these Installation Instructions.

• Do not install or store the appliance in an area where it will be

exposed to water/weather. See the Location of Your Washer section.

• NOTE: This appliance must be properly grounded, and electrical

service to the washer.

• Certain internal parts are intentionally not grounded and may present

a risk of electric shock only during servicing. Service Personnel - Do

not contact the following parts while the appliance is energized:

Electrical Valve, Drain Pump, Heater and Motor.

INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN

Read these instructions completely and carefully.

FOR YOUR SAFETY:

TOOLS REQUIRED

• Adjustable wrench or 3/8 “ & 7/16 “ socket with ratchet

• Adjustable wrench or 9/16 “ & 3/8” open-end wrench

• Channel-lock adjustable pliers

• Carpenter’s level 8

TroubleshootingWasher CareWasher Use

Washer

Safety Operation

Requirements Installation

Instructions

23 1/2’’

(60 cm)

33 1/2’’

(85 cm)

PARTS REQUIRED (OBTAIN LOCALLY)

Water Hose (2)

PARTS SUPPLIED

Cable Tie Drain Hose Guide

Inlet Hose Screen Washers(2)

Washer DIMENSIONS

SIDE

22 1/2’’

(57 cm)

9

• Recycle or destroy the carton and plastic bags after the washer is

unpacked. Make materials inaccessible to children. Children might use

them for play. Cartons covered with rugs, bedspreads or plastic sheets

can become airtight chambers causing suocation.

Washer

Safety Operation

Requirements Installation

Instructions TroubleshootingWasher CareWasher Use

WARNING:

1. Cut and remove the top and bottom packaging straps.

2. While it is in the carton, carefully lay the washer on its side. DO NOT lay

the washer on its front of back.

3. Turn down the bottom ﬂaps-remove all base packaging, including the

cardboard, styrofoam base and styrofoam tub support (inserted in

center of base).

NOTE: If you are installing a pedestal, proceed to the installation

instructions that come with the pedestal.

4. Carefully return the Washer to an upright position and remove the carton.

5. Carefully move the washer to within 4 feet (122 cm) of the ﬁnal location.

6. Remove the following from the back side of the washer:

4 bolts

4 plastic spacers (including rubber grommets)

4 power cord retainers

UNPACKING THE WASHER

IMPORTANT: Failure to remove the shipping bolts* can cause the washer to

become severely unbalanced.

Save all bolts for future use.

* Any damages from failure to remove the shipping bolts are not covered by the

warranty.

10

NOTE: If you must transport the washer at a later date, you must reinstall

the shipping support hardware to prevent shipping damage. Keep the

hardware in the plastic bag provided.

INSTALLING THE WASHER

1. Run some water from the cold faucet to ﬂush the water lines and remove

particles that might clog up the inlet hose.

2. Ensure there is a rubber washer in the hoses. Reinstall the rubber washer

into the hose ﬁtting if it has fallen out during shipment. Carefully connect

the inlet hose marked HOT to the rear “H” inlet of the water valve.

Tighten by hand;then tighten another 2/3 turn with pliers. And COLD

to the rear “C” inlet of the water valve. Tighten by hand; then tighten

another 2/3 turn with pliers.

Do not crossthread or over-tighten these connections.

3. Install the screen washers by inserting them into the free ends of the

inlet hoses with protruded side facing the faucet.

4. Connect the inlet hose ends to the HOT and COLD water faucets tightly

by hand, then tighten another 2/3 turn with pliers. Turn the water on

and check for leaks.

5. Carefully move the washer to its ﬁnal location. Gently rock the washer into

position ensuring inlet hoses do not become kinked. It is important not

to damage the rubber leveling legs when moving your washer to its ﬁnal

location. Damaged legs can increase washer vibration. It may be helpful to

spray window cleaner on the ﬂoor to help move your washer into its ﬁnal

position.

NOTE: To reduce vibration, ensure that all four rubber leveling legs are

ﬁrmly touching the ﬂoor. Push and pull on the back right and then back

left of your washer.

TroubleshootingWasher CareWasher Use

Washer

Safety Operation

Requirements Installation

Instructions

11

Washer

Safety Operation

Requirements Installation

Instructions TroubleshootingWasher CareWasher Use

Cable

Tie Cable

Tie

NOTE: Do not use the dispenser drawer or door to lift the washer.

NOTE: If you are installing into a drain pan, you can use a 24-inch long

2x4 to lever the Washer into place.

6. With the Washer in its ﬁnal position, place a level on top of the washer

(if the washer is installed under a counter, the washer should not be able

to rock). Adjust the front leveling legs up or down to ensure the washer

is resting solid. Turn the locknuts on each leg up towards the base of the

washer and snug with a wrench.

NOTE: Keep the leg extension at a

minimum to prevent excessive vibration.

The farther out the legs are extended,

the more the washer will vibrate.

If the ﬂoor is not level or is damaged,

you may have to extend the rear leveling

legs.

7. Attach the U-shaped hose guide to the end of the drain hose. Place

the hose in a laundry tub or standpipe and secure it with the cable tie

provided in the enclosure package.

NOTE: Placing the drain hose too far down the drain pipe can cause a

siphoning action. No more than 7 inch (17.78 cm) of hose should be in the

drain pipe. There must be an air gap around the drain hose. A snug ﬁt can

also cause a siphoning action.

8. Plug the power cord into a grounded outlet.

NOTE: Turn o electricity to the circuit breaker/fuse box before plugging

the power cord into an outlet.

9. Turn on the power at the circuit breaker/fuse box.

10. Read the rest of this Owner’s Manual. It contains valuable and helpful

information that will save you time and money.

11. Before starting the Washer, check to make sure:

• Main power is turned on.

• The washer is plugged in.

• The water faucets are turned on.

• The Washer is level and all four leveling legs are ﬁrmly in the ﬂoor. The

shipping support hardware is removed and saved.

• The drain hose is properly tied up.

12

Delay

Add agarment

On/O

Press once to turn the

washing machine on,

press again to turn the

washing machine o.

Display

WashChild LockDoor Lock

Steam

My Cycle

Express Spin

Start/Pause

Press the button to

start or pause the

wash cycle

Function setting

Press the button repeatedly to set the

water temp. soil level, rinse number, spin

speed and so on.

Program

For the convenience of users to

washing clothes with the dierent

program.

12. Run the Washer through a complete cycle.

13. If your Washer does not operate, please review the Before You Call

For Service section before calling for service.

14. Place these instructions in a location near the washer for future

reference.

WASHER CONTROL PANEL

Control Panel

Notes: 1. The Control panel line chart is for reference only, Please refer to actual product as standard.

TroubleshootingWasher CareWasher Use

Washer

Safety Operation

Requirements Installation

Instructions

Rinse

13

Washer

Safety Operation

Requirements Installation

Instructions TroubleshootingWasher CareWasher Use

Operating Instructions

- Normal

This selection is for hard-wearing heat-resistant fabrics made of cotton or linen.

- Heavy Duty

This cycle is for washing the heavy clothing like towels.

- Bulky

This selection is for washing the large articles.

- Sports Wear

This selection is for washing activewear.

- Spin Only

This selection allows extra spin with selectable spin speed.

- Rinse & Spin

This selection is for only rinse with spin, no wash cycle.

- Washer Clean

This selection is specially set in this machine to clean the drum through high

temperature sterilization. Chlorine bleach can be added to this selection, it is

recommended to run monthly or as needed.

- Quick Wash

This selection has shortened cycles for lightly soiled washing and small loads of

laundry.

- Delicates

This selection is for delicate, washable fabrics, made of silk, satin, synthetic or

blended fabrics.

- Sanitary

This selection uses hot water for all cycles, suitable for dicult to wash the

clothes.

- Wool

This selection is for wool fabrics labeled as “Machine Wash”. Please select the

proper washing temperature according to the label on the articles to be washed.

Speciﬁc detergent may be required, review care label for complete instructions.

- Perm Press

This selection is used to reduce the wrinkling of clothes.

- Baby Wear

This selection is intended to make baby’s clothes cleaner, the rinse cycle better

protects the baby skin.

- My Cycle

Press Spin 3sec. for my cycle to memorize user settings.

- Cold Wash

This selection is for cold water wash & rinse only.

- Drain Only

This selection is to drain the tub, no other functions performed during this cycle.

14

TroubleshootingWasher Care

Washer

Safety Operation

Requirements Installation

Instructions Washer Use

Ⅱ Ⅰ

Special functions

-Child Lock

To set Child Lock, hold down simultaneously Soil Level & Dryness selections

for 3 seconds. The buzzer will beep, Start/Pause button as well as the rotary

switch are locked. Press the two buttons for 3 seconds together and buzzer

will beep to release the lock.

-Delay

Delay function can be set with this button, the delaying time is 0-24 hours.

-Steam

Allows steam to be used during noted selections

-Temperature

Allows custom temperature setting for various selections.

-Soil level

Allows custom soil level setting (light to heavy) for various selections.

-Dryness

Allows custom soil level setting for various selections, including timed dry

and air ﬂu.

-Spin

Allows changing spin speed, low to high.

Washing clothes for the ﬁrst time

Before washing clothes for the ﬁrst time, the washing machine needs to be

operated in one round of the whole procedure without clothes in as follows:

1. Connect power source and water.

2. Put a small amount of detergent into the

box and close it.

NOTE: The drawer is separated as follows:

I: Pre-wash detergent or washing powder.

II: main wash

fabric softener or bleach

3. Press the button “On/o”.

4. Press the button “Start/Pause”.

Loading POD’s in the washer

- First load POD’s directly into the bottom of an empty basket

- Then add clothes on top of the POD’s

NOTE:

- Loading POD’s at the bottom of the basket will improve wash performance

and will enable detergent to dissolve more easily in the wash.

15

Operation

Requirements Installation

Instructions TroubleshootingWasher Care

Washer Use

Washer

Safety

Extra Hot

(Hot+)

heavily soiled, pure white cotton or linen blended (for

example: coee table cloths, canteen table cloths,

towels, bed sheets)

Hot

Moderately soiled, colorful linen blended, cotton and

synthetic articles with certain decolorizing degree (for

example: shirts, night pajamas, pure white linen (for

example: underwear)

Warm Normally soiled articles (including synthetic and wool)

Operating Instructions

Table of washing procedures Model:MLH27N4AWWC

 Means optional Energy test program: Normal

• The parameters in this table are only for user’s reference. The actual

parameters vary from the parameters in above mentioned table.

16

Operation

Requirements Installation

Instructions TroubleshootingWasher Use Washer Care

Washer

Safety

WARNING

Fire Hazard

• Never place items in the washer that are dampened

with gasoline or other ﬂammable liquids.

• No washer can completely remove oil.

• Do not dry anything that has ever had any type of oil

on it (including cooking oils).

• Doing so can result in death, explosion, or ﬁre.

LOADING AND USING THE WASHER

Always follow fabric manufacturer’s care label when laundering.

SORTING WASH LOADS

Sort laundry into loads that can be washed together.

• Combine large and small items in a load. Load large items ﬁrst. Large

items should not be more than half the total wash load.

• Washing single items is not recommended. This may cause an out-of-

balance load. Add one or two similar items.

• Pillows and comforters should not be mixed with other items. This

may cause an out-of-balance load.

PREPARING CLOTHES

To avoid snags during washing:

Follow these steps to maximize garment care.

• Close garment zippers, snaps, buttons and hooks.

• Mend seams, hems, tears.

• Empty all items from pockets.

• Remove non-washable garment accessories such as pins and

jewelry and non-washable belts & trim materials.

• To avoid tangling, tie strings, draw ties and belt-like materials.

• Brush away surface dirt and lint.

• Promptly wash wet or stained garments to maximize results.

• Use nylon mesh garment bags to wash small items.

• Wash multiple garments at one time for best results.

17

COLORS SOIL FABRIC LINT

Whites

Lights

Darks

Heavy

Normal

Light

Delicates

Easy Care

Sturdy Cottons

Lint

Producers

Lint

Collectors

Operation

Requirements Installation

Instructions TroubleshootingWasher Use Washer Care

Washer

Safety

LOADING THE WASHER

Wash drum may be fully loaded with loosely added items. Do not wash

fabrics containing ﬂammable materials (waxes, cleaning ﬂuids, etc.).

To add items after washer has started, press for 3 seconds and wait

until the door is unlocked, the washer may take up to 30 seconds to

unlock the door. If the water temperature is extra hot, you may not be

able to pause the cycle.

Do not try to force open the door when it is locked. After the door

unlocks, open gently. Add items, close the door and press to restart.

WASHER CARE

CLEANING

EXTERIOR

Immediately wipe o any spills. Wipe with damp cloth. Do not hit surface

with sharp objects.

INTERIOR

To clean the interior of the washer, select the Washer Clean feature on

the control panel. This cycle should be performed, at a minimum, once

per month. This cycle will use more water, in addition to bleach, to control

the rate at which soils and detergents may accumulate in your washer.

NOTE: Read the instructions below completely before starting the Tub

Clean cycle.

1. Remove any garments or objects from the washer and ensure the

washer basket is empty.

2. Open the washer door and pour one cup or 250 ml of liquid bleach or

other washing machine cleaner into the basket.

3. Close the door and select the Tub Clean cycle. Push the button.

4. When the Washer Clean cycle is working, the display will show the

estimated cycle time remaining. The cycle will complete in about 90

minutes. Do not interrupt the cycle.

18

Operation

Requirements Installation

Instructions TroubleshootingWasher Use Washer Care

Washer

Safety

Care And Cleaning

WARNING

Pull out the power plug to avoid electrical shock before servicing washer.

For prolonged non-use of the washing machine, pull out the power cord and

close the door tightly to avoid children from entering.

Remove foreign matters

Drain Pump Filter:

Drain pump ﬁlter can ﬁlter the yarns and small foreign matters from the washing cycles.

Clean the ﬁlter periodically to ensure the normal operation of washing machine.

Depending on the soil level within the cycles and the frequency of the cycles,

you will need to inspect and clean the ﬁlter regularly.

The pump should be inspected if the machine does not empty and/or spin;

The machine may make an unusual noise during draining due to objects

such as safety pins, coins etc. blocking the pump, disconnect power before

servicing pump.

Service as follows:

1

Open the lower

cover cap

2

Emergency

drain hose

3

After water runs out,

reset the drain hose

4

Open the ﬁlter

by turning to the

counter clockwise

5

Remove collected

items

6

Close the lower cover

cap

Rotate 90° and pull

out the emergency

drain hose, and take

o the hose cap

When the appliance is in use and depending on the program selected

there can be hot water in the pump. Never remove the pump cover during

a wash cycle, always wait until the appliance has ﬁnished the cycle, and is

empty. When replacing the cover, ensure it is securely re-installed.

WARNING

19

Operation

Requirements Installation

Instructions Washer CareWasher Use Troubleshooting

Washer

Safety

BEFORE YOU CALL FOR SERVICE...

Troubleshooting Tips

Save time and money! Review the charts on the following pages ﬁrst and

you may not need to call for service.

20

Problem Possible Cause What To Do

Not draining

Not spinning

Not agitating

Load is out of balance

Pump clogged

Drain hose is kinked or

improperly connected

Household drain may be

clogged

Drain hose siphoning;

drain hose pushed too far

down the drain

• Redistribute clothes and

run drain & spin or rinse

& spin.

• Increase load size if

washing small load

containing heavy and

light items.

• See page 18 on how to

clean the Pump Filter.

• Straighten drain hose and

make sure washer is not

sitting on it.

• Check household

plumbing. You may need

to call a plumber.

• Ensure there is an air gap

between hose and drain.

Leaking water Door gasket is damaged • Check to see if gasket is

seated and not torn.

Objects left in pockets

may cause damage to

the washer (nails, screws,

pens, pencils).

Door gasket not damaged • Water may drip from the

door when the door is

opened. This is a normal

operation.

• Carefully wipe o rubber

door seal. Sometimes dirt

or clothing is left in this

seal and can cause a small

leak.

Check back left of washer

for water • If this area is wet, you

have oversudsing

condition. Use less

detergent.

La page charge ...

Midea MLH27N4AWWC Manuel utilisateur

Midea MLH27N4AWWC Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents