LG WM3488HW Le manuel du propriétaire

Catégorie
Machines à laver
Taper
Le manuel du propriétaire

Ce manuel convient également à

OWNER’S MANUAL
WASHING MACHINE
WM3488H*
www.lg.com
Please read this owner’s manual thoroughly before operating and
keep it handy for reference at all times.
MFL63288674
ENGLISH FRANÇAIS
2
TABLE OF CONTENTS
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 IMPORTANT SAFETY INSTRUCTIONS
4 BASIC SAFETY PRECAUTIONS
5 GROUNDING INSTRUCTIONS
6 SAFETY INSTRUCTIONS FOR INSTALLATION
7 SAFETY INSTRUCTIONS FOR USE, CARE,
CLEANING, AND DISPOSAL
8 PRODUCT OVERVIEW
8 Parts
8 Accessories
9 Control Panel Features
11 INSTALLATION
11 Installation Overview
12 Choosing the Proper Location
13 Unpacking and Removing Shipping Bolts
14 Connecting the Water Lines
15 Connecting the Drain Line
16 Leveling the Washer
17 Connecting to the Power Supply
17 Testing the Washer
18 PREPARATION
18 Sorting Wash Loads
19 - Fabric Care Labels
19 - Sorting Laundry
20 Using Detergent/Fabric Softener
20 - Recommended Detergent
20 - Loading the Dispenser
22 OPERATION
22 Using the Washer
23 Cycle Guide
24 Wash Cycles
24 - Sanitary: Reducing Laundry Bacteria
24 - Baby Wear: Lightly Soiled Baby Clothes
24 - Bulky/Large: Blankets or Bulky Items
24 - Heavy Duty: Heavily Soiled Items
24 - Perm. Press: Wrinkle-Free Items
24 - Cotton/Normal: Normal Items
24 - Sports Wear: High-Performance Fabrics
24 - Hand Wash/Wool: Items Labeled Wool or
Hand-Wash
24 - Delicates: Sheer Items
24 - Speed Wash: Washing Quickly
24 - Wash+Dry: A Small Load which Can Be
Tumble Dried
24 - Drain+Spin: Drain and Spin Only
25 Cycle Modifier Buttons
25 Setting Options Before Cycle
25 - Soil Level
25 - Temp.
25 - Spin Speed
27 - Dry
27 - Delay Wash
27 - Water Plus
27 - Rinse+Spin
27 - Extra Rinse
27 - Pre Wash
27 - Signal On/Off
28 Setting Options During Cycle
28 - Child Lock
28 - PGM Save
28 - Custom PGM
28 Adding Garments
29 MAINTENANCE
29 Regular Cleaning
29 - Care After Wash
29 - Care in Cold Climates
30 Cleaning
30 - Tub Clean
31 - Cleaning the Detergent Dispenser Drawer
32 - Cleaning the Water Inlet Filters
33 - Cleaning the Drain Pump Filter
34 - Cleaning the Door Seal
35 TROUBLESHOOTING
35 Checking Error Messages
36 Before Calling for Service
38 SPECIFICATIONS
39 USING SMART DIAGNOSIS™
40 USING THE TAG ON FUNCTION
41 WARRANTY
3
PRODUCT FEATURES
ENGLISH
PRODUCT FEATURES
INVERTER DIRECT-DRIVE MOTOR
The inverter direct drive motor, which is directly connected to the drum, is capable of producing multiple
distinct motions for optimal wash performance with very little noise and vibration. The motor assembly
also contains fewer moving parts, resulting in fewer repairs.
SMART DIAGNOSIS™
Should you experience any technical difficulty with your washing machine, it has the capability of
transmitting diagnostic data to your smart phone via a free app or directly to the Customer Information
Center for quick and efficient troubleshooting (refer to page 39).
TUB CLEAN
Regular cleaning of the tub on a monthly basis using TUB CLEAN can help keep the tub clean and fresh.
LARGE CAPACITY STAINLESS STEEL DRUM
The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and
allow easier access for large items.
CHILD LOCK
Use this option to disable the controls during a wash cycle. This option can prevent children from
changing cycles or operating the machine.
DETERGENT DISPENSER DRAWER
The four-compartment dispenser drawer makes it easy to separate the pre-wash detergent, the main
laundry detergent, liquid bleach, and fabric softener into different compartments and will be dispensed
automatically at the appropriate time.
4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or
electric shock, or to prevent property damage, injury to persons, or death.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.
These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed.
BASIC SAFETY PRECAUTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following :
Use this appliance only for its intended purpose as
described in this owner’s manual.
Before use, the washer must be properly installed as
described in this manual.
Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline, dry
cleaning solvents, or other flammable or explosive
substances, as they give off vapors that could ignite
or explode.
Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washer, turn
on all hot water faucets and let the water flow from
each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer
is used near children.
Before the washer is removed from service or
discarded, remove the lid to prevent children from
climbing inside.
Do not install or store the washer where it will be
exposed to the weather or freezing temperatures.
Do not tamper with controls.
Keep the area underneath and around your
appliances free of combustible materials (lint, paper,
rags, etc.), gasoline, chemicals and other flammable
vapors and liquids.
Do not repair or replace any part of the washer or
attempt any servicing other than as described in this
manual. We strongly recommend that any service be
performed by a qualified technician.
See Installation Instructions for grounding
requirements.
ALWAYS follow the fabric care instructions supplied by
the garment manufacturer.
Do not place items exposed to cooking oil in your
washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a
load to catch fire.
Use fabric softeners or products to eliminate static
only as recommended by the manufacturer.
This washer is not designed for maritime use or for
mobile installations such as in RVs, aircraft, etc.
Turn off the water faucets and unplug the washer if the
machine is to be left for an extended period of time,
such as during vacations.
Packaging material can be dangerous for children.
There is a risk of suffocation! Keep all packaging from
children.
Always check the inside of the washer for foreign
objects before loading laundry. Keep the lid closed
when not in use.
Do not reach into the appliance if the tub or agitator is
moving.
WARNING : This product contains chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm.
Wash hands
after handling.
5
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire,
explosion, or electric shock, or to prevent property damage, injury to persons, or death.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with
a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do
not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed
by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or
death.
6
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire,
explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following :
Refer to the INSTALLATION INSTRUCTIONS for
detailed grounding procedures. Installation
instructions are packed with the washer for the
installer’s reference. If the washer is moved to a
new location, have it checked and reinstalled by
a qualified service technician. Failure to follow
this warning can cause serious injury, fire,
electric shock, or death.
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
For personal safety, this appliance must be properly
grounded. Failure to follow this warning can
cause serious injury, fire, electric shock, or death.
The power cord of this appliance is equipped with
a 3-prong (grounding) plug which mates with a
standard 3-prong (grounding) wall outlet to
minimize the possibility of electric shock from
this appliance.
This washer must be plugged into a 120 VAC, 60
Hz grounded outlet. Failure to follow this
warning can cause serious injury, fire, electric
shock, or death.
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded. Failure to follow this
warning can cause serious injury, fire, electric
shock, or death.
Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility and
obligation to have it replaced with a properly
grounded 3-prong wall outlet. Failure to follow
this warning can cause serious injury, fire,
electric shock, or death.
Do not install on carpet. Install washer on a solid
floor. Failure to follow this warning can cause
serious leak damage.
Do not remove ground prong. Do not use an adapter
or extension cord. Plug into a grounded 3-prong
outlet. Failure to follow these warnings can cause
serious injury, fire, electric shock, or death.
The washer should always be plugged into its own
individual electrical outlet which has a voltage
rating that matches the rating plate. This
provides the best performance and also
prevents overloading house wiring circuits
which could cause a fire hazard from
overheated wires.
Never unplug your washer by pulling on the
power cord. Always grip the plug firmly and
pull straight out from the outlet. Failure to
follow this warning can cause serious injury,
fire, electric shock, or death.
Repair or immediately replace all power cords
that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion
damage along its length or at either end. Failure
to follow this warning can cause serious injury,
fire, electric shock, or death.
When installing or moving the washer, be careful
not to pinch, crush, or damage the power cord.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
The washer must be installed and electrically
grounded by a qualified service person in
accordance with local codes to prevent shock
hazard and assure stability during operation.
The washer is heavy. Two or more people may be
needed to install and move the appliance. Failure
to do so can result in back or other injury.
Store and install the washer where it will not be
exposed to temperatures below freezing or exposed
to outdoor weather conditions. Failure to follow
this warning can cause serious leak damage.
To reduce the risk of electric shock, do not install
the washer in humid spaces. Failure to follow
this warning can cause serious injury, fire,
electric shock, or death.
To reduce the risk of injury to persons, adhere to
all industry recommended safety procedures
including the use of long sleeved gloves and
safety glasses. Failure to follow all of the safety
warnings in this manual could result in
property damage, injury to persons or death.
Certain internal parts are intentionally not
grounded and may present a risk of electric shock
only during servicing. Service personnel - Do not
contact the following parts while the appliance
is energized: pump, valve, motor, control
board, drying heater.
7
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire,
explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following :
SAVE THESE INSTRUCTIONS
Unplug the washer before cleaning to avoid the
risk of electric shock.
Never use harsh chemicals, abrasive cleaners, or
solvents to clean the washer. They will damage
the finish.
Do not put oily or greasy rags or clothing on top of
the washer. These substances give off vapors
that could ignite the materials.
Do not wash items that are soiled with vegetable
or cooking oil. These items may contain some oil
after laundering. Due to the remaining oil, the
fabric may smoke or catch fire by itself.
Disconnect this appliance from the power supply
before attempting any user maintenance. Turning
the controls to the OFF position does not
disconnect this appliance from the power supply.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
Do not combine laundry products for use in one
load unless specified on the label.
Do not mix chlorine bleach with ammonia or acids
such as vinegar. Follow package directions when
using laundry products. Incorrect usage can
produce poisonous gas, resulting in serious
injury or death.
Do not reach into the washer while parts are
moving. Before loading, unloading, or adding
items, press the START/PAUSE button and allow
the drum to coast to a complete stop before
reaching inside. Failure to follow this warning
can cause serious injury, fire, electric shock, or
death.
Do not allow children to play on or in the washer.
Close supervision of children is necessary when
the washer is used near children. As children
grow, teach them the proper, safe use of all
appliances. Failure to comply with these
warnings could result in serious injury to
persons or death.
Destroy the carton, plastic bag, and other packing
materials after the washer is unpacked. Children
might use them for play. Cartons covered with
rugs, bedspreads, or plastic sheets can become
airtight chambers. Failure to comply with these
warnings could result in serious injury to
persons or death.
Keep laundry products out of children’s reach. To
prevent injury to persons, observe all warnings on
product labels. Failure to comply with these
warnings could result in serious injury to
persons or death..
Before your washer is removed from service or
discarded, remove the door to the washing
compartment to avoid the danger of children or
small animals getting trapped inside Failure to do
so can result in serious injury to persons or
death.
Make sure the dispenser drawer is closed at all
times when not being filled with laundry products.
Failure to keep the drawer closed can result in
personal injury or flooding.
Certain internal parts are intentionally not
grounded and may present a risk of electric shock
only during servicing. Service personnel - Do not
contact the following parts while the appliance
is energized: pump, valve, motor, control board,
drying heater.
8
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Parts
Accessories
NOTE
Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are
y
missing.
For your safety and for extended product life, use only authorized components. The manufacturer
y
is not responsible for product malfunction or accidents caused by the use of separately purchased
unauthorized components or parts.
The images in this guide may be different from the actual components and accessories, and are subject
y
to change by the manufacturer without prior notice for product improvement purposes.
or
Hot/cold water hoses Non-skid pads
Caps for covering
shipping bolt holes
Wrench Tie strap
Elbow bracket
(for securing drain hose)
Included Accessories
Detergent
dispenser
drawer
(See page 20)
Door
Control panel
(See page 9)
Leveling feet
Drain pump filter cover
Drain pump filter
Drain hose
Water inlets
Shipping
bolts
Power
cord
Drain
hose
Large-capacity
stainless steel drum
Inverter direct-
drive motor
9
PRODUCT OVERVIEW
ENGLISH
Control Panel Features
Operation
Button Description
Turns the washing machine on and off.
y
(During the wash cycle) stops operation, and cancels the settings.
y
Tub Clean
y
- For tub clean (see page 30).
Sanitary
y
- For underwear, diapers, etc. (see page 24).
Baby Wear
y
- For lightly soiled baby clothes (see page 24).
Bulky/Large
y
- For blankets or large, bulky items (see page 24).
Heavy Duty
y
- For heavily soiled cotton fabric (see page 24).
Perm. Press
y
- For wrinkle-free fabric (see page 24).
Cotton/Normal
y
- For general laundry, such as cotton T-shirts or towels (see page 24).
Sports Wear
y
- For high-performance fabrics which need special care (see page 24).
Hand Wash/Wool
y
- For wool or hand-wash fabrics (see page 24).
Delicates
y
- For sheer and delicate fabrics (see page 24).
Speed Wash
y
- For small quantities of lightly soiled items (see page 24).
Wash+Dry
y
- For a small load which can be washed and dried in the same cycle (see page 24).
Drain+Spin
y
- For items that only require draining and spinning (see page 24).
Starts or pauses the wash cycle.
y
- If you do not press the Start/Pause button within 4 minutes of selecting a cycle, the
washing machine will turn off automatically and all settings will be lost.
(Press repeatedly) Selects a wash cycle by soil level (see page 25).
y
- Selects soil level from 3 settings.
(Press repeatedly) Selects the water temperature for the wash cycle (see page 25).
y
- Select water temperature from 5 settings.
(Press repeatedly) Selects the spin speed (see page 25).
y
- Selects spin speed from 5 settings.
(Press repeatedly) Selects a dry cycle. Pressing this button enables drying.
y
(See page 26).
Operation Custom PGM Button Display
Cycle selector
Soil
Level
Selection
Button
Dry
Selection
Button
Spin
Speed
Selection
Button
Pre Wash
Button
Water
Temperature
Selection
Button
Start/
Pause
Button
Power
Button
10
PRODUCT OVERVIEW
Operation (continued)
Button Description
Set the delay time of starting the cycle (see page 27).
y
Use this option to add extra water to the wash and rinse cycles for
y
better wash performance with large or bulky items.
Use this option to save a special combination of settings that you use
y
frequently. (See page 28).
Use this option to rinse detergent from the load. (See page 27).
y
Add an extra rinse to the selected cycle (see page 27).
y
(Press before wash cycle) Pre wash heavily soiled laundry (see page 27).
y
(Press and hold during wash cycle) Lock/Unlock the buttons (see page 28).
y
Display
Door lock
indicator
Child lock
indicator
Cycle process
indicator
Estimated time remaining/
error message display
(See page 35)
Display Icon Description
This portion of the display shows which stage of the wash cycle is
y
currently underway (Wash, Rinse, Spin, Dry).
This indicator shows that the door is locked. The washer door will lock while
y
the washer is operating. The door can be unlocked by pressing the Start/
Pause button to stop the washer.
This indicator shows that the washer has been set for Child Lock. The
y
Child Lock function locks the buttons on the control panel to prevent them
from being used.
When the Start/Pause button is pressed, the washer automatically detects
y
the wash load (weight) and optimizes the washing time, based on the
selected cycle and options. The display will then indicate the estimated
time remaining for the selected wash cycle.
11
INSTALLATION
ENGLISH
INSTALLATION
Installation Overview
WARNING
Washer is heavy! Two or more people are required when moving and unpacking the washer.
y
Failure
to follow this warning can result in back or other injury.
Store and install the washer where it will not be exposed to temperatures below freezing or exposed
y
to outdoor weather conditions.
Failure to follow this warning can cause serious injury, fire, electric
shock, or death.
Properly ground washer to conform with all governing codes and ordinances.
y
Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
To reduce the risk of electric shock, do not install the washer in humid spaces.
y
Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
The base opening must not be obstructed by carpeting when the washer is installed on a carpeted
y
floor.
Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong
y
outlet.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Choosing the proper
location
Unpacking and removing
shipping bolts
Connecting
the water line
Connecting
the drain line
Leveling the washer
Connecting to the
power supply
Testing the washer
12
INSTALLATION
Choosing the Proper Location
Install the washing machine on a solid floor that
is strong and rigid enough to support the weight
of the washing machine, even when fully loaded,
without flexing or bouncing. If the floor has too
much flex, you may need to reinforce it to make
it more rigid. If the floor is not solid, it may cause
severe vibration and noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth ground.
2
Two or more people are needed for moving and
unpacking the washing machine.
3
Allow for sufficient space between the walls and
the washing machine for installation.
Space Requirements
You must allow sufficient space for water lines,
the drain line, and airflow.
NOTE
Be sure to allow for wall, door, or floor
y
moldings that may incr he required clearances.
Clearances
21.6" (54.86 cm)
25.2" (64 cm)
45" (114.3 cm)
33.5" (85.09 cm)
3.5" (8.89 cm)
24" (60.96 cm) 1" (2.5 cm)1" (2.5 cm)
NOTE
The floor must be strong and rigid enough to
y
support the weight of the washer, when fully
loaded, without flexing or bouncing. If your
floor has too much flex,
you may need to reinforce it to make it more
rigid.
A floor that is adequate for a top-loading
washer may not be rigid enough for a front
loading washer, due to the difference in the
spin speed and direction. If the floor is not
solid, your washer may vibrate and you may
hear and feel the vibration throughout your
house.
Before installing the washer, make sure the
y
floor is clean, dry and free of dust, dirt, water
and oils so the washer feet can not slide easily.
Leveling feet that can move or slide on the
floor can contribute to excess vibration and
noise due to poor contact with the floor.
If a drip pan must be used, take extra care
y
to follow the instructions provided with the
drip pan and make sure the leveling feet are
adjusted for firm and even contact with the
pan. Use of drip pans and failure to properly
level the machine may result in increased
vibration and noise during operation.
13
INSTALLATION
ENGLISH
1
Starting with the bottom two shipping bolts,
use the wrench (included) to fully loosen all four
shipping bolts by turning them counterclockwise.
Remove the bolt assemblies by wiggling them
slightly while pulling them out.
2
Locate the four hole caps included in the
accessory pack and install them in the shipping
bolt holes.
Cap
NOTE
Save the bolt assemblies for future use. To
y
prevent damage to internal components, do
not transport the washer without reinstalling
the shipping bolts.
Failure to remove shipping bolts and retainers
y
may cause severe vibration and noise, which
can lead to permanent damage to the washer.
The cord is secured to the back of the washer
with a shipping bolt to help prevent operation
with shipping bolts in place.
Unpacking and Removing Shipping
Bolts
Remove the washer from the carton base.
If you must lay the washer down to remove the
base packaging materials, always lay it carefully on
its side. Do not lay the washer on its front or back.
Carton Base
14
INSTALLATION
4
Connect the hoses to the water inlets tightly by
hand and then tighten another 2/3 turn with pliers.
- Connect the blue hose to the cold water inlet
and the red hose to the hot water inlet.
Cold
water
inlet
Hot
water
inlet
WARNING
Do not overtighten the hoses.
y
Overtightening
can damage the valves resulting in leaking
and property damage.
5
Check for leaks by turning on the faucets.
- If water leaks, check steps 1 to 4 again.
NOTE
For your safety, and for extended product
y
life, use only authorized components. The
manufacturer is not responsible for product
malfunction or accidents caused by the use
of separately purchased, unauthorized parts.
Use new hoses when installing the washing
y
machine. Do not reuse old hoses.
Contact LG Customer Service for Assistance
y
in buying hoses : 1-800-243-0000.
Periodically check the hoses for cracks,
y
leaks and wear, and replace the hoses every
5 years. Do not stretch the water hoses
intentionally, and make sure that they are
not crushed by other objects.
Water supply pressure must be between 20
y
psi and 120 psi (138 – 827 kPA). If the Water
supply pressure is more than 120 psi, a
Pressure reducing valve must be installed.
To provide optimum washing performance
y
the hot water temperature should be set at
120 – 135°F (48-57°C) and the cold at 60°F
(15°C).
Connecting the Water Lines
1
Check the rubber seals on both sides of the hose.
- Insert a rubber seal into the threaded fittings on
each hose to prevent leaking.
Rubber seal
Water hose
(To water inlet on the
washing machine)
Rubber seal
Water hose
(To faucet)
2
Connect the water supply hoses to the HOT and
COLD water faucets tightly by hand and then
tighten another 2/3 turn with pliers.
- Connect the blue hose to a cold water faucet
and the red hose to a hot water faucet.
WARNING
Do not overtighten. Damage to the coupling
y
can result.
3
After connecting the inlet hoses to the water
faucets, turn on the water faucets to flush out
foreign substances (dirt, sand or sawdust) in the
water lines. Let the water drain into a bucket, and
check the water temperature.
15
INSTALLATION
ENGLISH
Connecting the Drain Line
Secure the drain hose in place to prevent moving
and leaking.
NOTE
The drain hose should be properly secured.
y
Failure to properly secure the drain hose can
result in flooding and malfunction.
Total height of the hose end should not exceed
y
96 inches (244.8 cm) from the bottom of the
washer.
The drain must be installed in accordance with
y
any applicable local codes and regulations.
Make sure that the water lines are not
y
stretched, pinched, crushed, or kinked.
Using a Standpipe
1
Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10
cm) of the end of the drain hose. If the drain
hose is extended more than 4 inches (10 cm)
beyond the end of the elbow bracket, mold or
microorganisms could spread to the inside of
the washer.
No more than
4 inches (10 cm)
Elbow bracket
2
Insert the end of the drain hose into the
standpipe.
Drain Hose
Elbow Bracket
3
Use a tie strap to secure the drain hose in place.
Using a Laundry Tub
1
Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10
cm) of the end of the drain hose. If the drain
hose is extended more than 4 inches (10 cm)
beyond the end of the elbow bracket, mold or
microorganisms could spread to the inside of
the washer.
No more than
4 inches (10 cm)
Elbow bracket
2
Hang the end of the drain hose over the side of
the laundry tub.
Elbow Bracket
Drain Hose
3
Use a tie strap to secure the drain hose in place.
16
INSTALLATION
Leveling the Washer
The drum of your new washing machine spins at
very high speeds. To minimize vibration, noise, and
unwanted movement, the floor must be perfectly
level and solid.
1
Check that the washing machine is level.
- Ensure it is level by rocking the top edges of
the washing machine or placing a level on
the washing machine. The slope beneath the
washing machine must not exceed 1°, and all
four leveling feet must rest firmly on the floor.
Level
2
Turn the lower leveling feet clockwise to level
the washing machine.
- Turning the lower leveling feet clockwise
raises the washing machine.
Raise Lower
3
Turn the locknuts counterclockwise and tighten
them when the washing machine is level.
Tighten all 4 lock
nuts securely using
the wrench.
4
Check again to make sure the machine is level.
- Push or rock the top edges of the washing
machine gently to make sure that the washing
machine does not rock.
-
If the washing machine rocks, repeat steps 1 to 3.
WARNING
Using the washing machine without leveling,
y
it may result in malfunction caused by the
production of excess vibration and noise.
If you are installing the washing machine
y
on the optional pedestal, you must adjust
the leveling feet on the pedestal to level the
washing machine. The washing machine´s
leveling feet should be minimized and the
locknuts turned counterclockwise to secure
them.
Use the leveling feet only when you level the
y
washing machine. If you raise the leveling feet
unnecessarily, it may cause abnormal vibration
of the washing machine.
Using Non-Skid Pads (Optional)
If you install the washing machine on a slippery
surface, it may move because of excessive vibration.
Incorrect leveling may cause malfunction through
noise and vibration. If this occurs, lay the non-skid
pads under the leveling feet and adjust the level.
1
Clean the floor to attach the non-skid pads.
- Use a dry rag to remove and clean foreign
objects or moisture. If moisture remains, the
non-skid pads may slip.
2
Adjust the level after placing the washing
machine in the installation area.
3
Place the adhesive side of the non-skid pad on
the floor.
- It is most effective to install the non-skid pads
under the front legs. If it is hard to place the
pads under the front legs, place them under the
back legs.
Remove
backing
This side up
Adhesive
side
4
Check the washing machine’s level again.
- Push or rock the top edges of the washing
machine gently to make sure that the washing
machine does not rock. If the washing machine
rocks, level the washing machine again.
17
INSTALLATION
ENGLISH
Connecting to the Power Supply
Make sure to ground the washing machine to
prevent a short circuit or an electric shock when
plugging in.
Using a 3-Prong Outlet
If plugged into a grounded, 3-prong outlet rated
for use with this appliance, no further grounding is
necessary.
WARNING
The power outlet must be within 60 inches (1.5
y
m) of either side of the washer.
The appliance and outlet must be positioned
y
so that the plug is easily accessible.
Do not overload the outlet with more than one
y
appliance.
The outlet must be grounded in accordance
y
with current wiring codes and regulations.
Time-delay fuse or circuit breaker is
y
recommended.
It is the personal responsibility and obligation
y
of the product owner to have a proper outlet
installed by a qualified electrician.
Do not use a worn or damaged power cord
y
or power plug. Replace or repair worn or
damages cords or plugs it immediately. Failure
to do so may result in death, fire, electric
shock, or malfunction.
Do not modify the power cord and take care
y
not to damage it when installing or moving
the washing machine. Failure to follow this
warning may result in death, fire, electric
shock, or malfunction.
Make sure that the washing machine is
y
grounded.
Connect this washing machine to a grounded
y
outlet conforming to the rating prior to use.
Failure to do so may result in fire, electric
shock, or malfunction.
Do not use adaptors or extension cords. The
y
washing machine should always be plugged
into its own individual electrical outlet which
has a voltage rating that matches the rating
plate. Failure to do so may result in fire, electric
shock or malfunction.
Do not damage or cut off the ground prong of
y
the power cord. Doing so may cause death,
fire, electric shock, or product malfunction.
Testing the Washer
Check if the washing machine is properly installed
and run a test cycle.
1
Load the washing machine with 6 pounds of
laundry (approximately 14 shirts).
2
Press the Power button and turn the cycle
selector knob to the right.
3
Press the Rinse+Spin button to select Rinse+Spin.
4
Press the Start/Pause button.
- The wash cycle starts.
5
Check if water is supplied, that the washing
machine does not rock or vibrate excessively,
and that it drains well during the spin cycle.
- If water leaks during water supply, see page
14, Connecting the water lines, to connect them
properly.
- If the washing machine rocks and vibrates
excessively, see page 16, Leveling the washing
machine, to level it again.
- If the drain does not work, see page 15,
Connecting the drain line, to install it properly.
18
PREPARATION
Check all pockets to make sure that they are
u
empty.
-Items such as clips, matches, pens, coins, and
keys can damage both your washer and your
clothes.
Close zippers, hooks, and drawstrings to prevent
u
these items from snagging or tangling on other
clothes.
Pretreat heavily stained areas before washing.
u
- Doing so will produce clean, stain-free results.
Combine large and small items in a load. Load
u
large items first.
Large items should not be more than half of the
u
total washload.
The washer can be fully loaded, but the drum
u
should not be tightly packed with items.
-The door of the washer should close easily.
Do not wash single items, except for bulky items
u
such as blankets. Make sure to wash laundry in
similar types of loads.
- Washing a single small item may result in the
tub becoming unbalanced, vibrating and making
a noise.
Do not wash waterproof clothes.
u
- This may cause abnormal vibration, or may
cause the load
to bounce, which could damage the tub.
Check if there are any foreign objects in the door
u
seal and take extra care that clothes do not get
caught there.
- Foreign objects in the door seal may stain
clothes, and water may leak if clothes get caught
in the door seal.
Wash underwear or small, light items in a laundry
u
net (mesh bag).
- Small, light items may get caught in the door
seal, and a brassiere hook may damage other
items or the tub.
Brush heavy soil, dust, or hair off fabrics before
u
washing.
- Laundry may not wash clean if there is dirt or
sand on the fabrics, or items may be damaged
due to particles rubbing against sheer fabrics.
Wash blankets individually.
u
- Washing more than one blanket in a load may
produce inferior results due to tangling or an
unbalanced load.
Always separate fabrics according to their colors
u
and wash them separately to prevent colors from
running.
- Fabrics may be damaged or become stained due
to fabric dyes running, or due to foreign objects
transferring from one fabric to another.
For best performance, load clothes as shown. u
1
3
2
4
- Load clothes loosely, and do not overfill the
drum. Clothes need room to circulate in order
to get clean.
- Do not press down on items while stacking
them in the drum.
PREPARATION
Sorting Wash Loads
Read and observe the following to prevent shrinkage or damage to clothes.
19
PREPARATION
ENGLISH
Category Label Directions
Washing
Hand Wash
Machine Wash, Normal
Cycle
Use Permanent Press/
Wrinkle Resistant
washing machine setting
(which has a cool down
or cold spray before the
reduced spin)
Use Gentle/Delicate
washing machine setting
(slow agitation and/ or
reduced wash time).
Do Not Wash
Do Not Wring
Water
Temperature
Hot
Warm
Cold/Cool
Bleach
symbols
Any Bleach (When
Needed)
Only Non-Chlorine
Bleach (When Needed)
Do Not Bleach
Colors Whites / Lights / Darks
Soil Heavy / Normal / Light
Fabric Delicates / Easy Care / Sturdy
Cottons
Lint Lint Producers / Lint Collectors
Fabric Care Labels
Most articles of clothing feature fabric care labels
that include instructions for proper care.
Sorting Laundry
Sort laundry into similar loads that are washable in
the same cycle.
Refer to the following chart for sorting clothes.
20
PREPARATION
PREPARATION
Loading the Dispenser
The detergent dispenser drawer of the washing
machine has a dispenser compartment for
each detergent type. Add each detergent to its
appropriate compartment.
1
Pull out the detergent dispenser drawer.
2
Add each detergent to its appropriate
compartment.
- If you use a liquid detergent, check if the liquid
detergent cup is in place.
- If you use a powdered detergent, remove the
liquid detergent cup and put the powder in the
main wash detergent compartment.
Main wash
detergent
compartment
Pre-wash
detergent
compartment
Liquid fabric
softener
compartment
3
Close the detergent dispenser drawer slowly.
- Slamming the detergent dispenser drawer
may result in the detergent overflowing into
another compartment or pouring into the tub
earlier than programmed.
NOTE
It is normal for a small amount of water to
y
remain in the dispenser compartments at the
end of the cycle.
Using Detergent/Fabric Softener
Recommended Detergent
Make sure to use HE (High-Efficiency) detergent
for front-loading washing machines. HE detergents
dissolve more efficiently and produce fewer suds
to ensure efficient washing and rinsing. Use the
correct amount of detergent as indicated on the
detergent packaging.
Specially designed to use only
HE (High-Efficiency) detergent
NOTE
Only use HE detergents, because using a
y
regular detergent may produce excessive suds.
HE detergents produce fewer suds, dissolve
y
more efficiently to improve washing and
rinsing performance, and help to keep the
interior of your washer clean.
Use less detergent for soft water.
y
Wipe up any spills immediately, as liquids
y
could damage the finish and the control panel
of the washing machine.
Using too much detergent can cause a build-
y
up in the tub resulting in unsatisfactory
performance and machine malfunction.
If you use a detergent that does not dissolve
y
easily or a detergent with high viscosity, it will
leave a residue on the tub, which may not rinse
properly.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

LG WM3488HW Le manuel du propriétaire

Catégorie
Machines à laver
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues