Novorodapie® Rehabit
Applications
Page 1 of 4
Aluminium baseboard with simple and smart design, created for
its installation in rehabilitations or reforms without work. It can be
placed on a previously installed skirting, saving time and costs in its
installation.
It is delivered with protective lm to avoid stains or damage
occasioned in handling or transport. Available as individual Brico
pack, bagged and labeled with instructions of installation.
Novorodapie® Rehabit is a baseboard made of anodized alumi-
nium, designed to its placement in rehabilitation or reform without
work. You can install it with adhesive on the existing skirting, obtai-
ning a perfect nish.
It also has available the option of installation by using the “fastening
pieces” specially designed for that purpose, so you don’t need an
existing skirting to place Novorodapie® Rehabit.
TECHNICAL FILE
R03.002_27/04/2016
Complementary pieces
Covers
Exterior angle
Interior angle
Technical Features
General Features
Novorodapie® Rehabit
Patent:
Community design
Nº1685256 - 0007
Material: Anodized and lacquered aluminum
Length:
2 ml
Dimensions: h: 12 mm. (1/2”) h: 20 mm. (3/4”)
a: 80 mm. (3-1/8”) a: 120 mm. (4-3/4”)
Packaging:
10 u./box
With protective lm
Finishes: 13 - Matt silver 13 - Matt silver
142 - Off-white 142 - Off-white
Rotate the “fastening prole” in the other direction for the Novorodapie® Rehabit h:120 mm.
Novorodapie® Rehabit disposes of complementary pieces mande of Zamak for a perfect nish.
The “fastening prole” (2 lm) made of aluminium, will guide you to place correctly the Novorodapie®
Rehabit.
Alloy: 6063 (AA and ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Lightfastness: Excellent
Appearance and color: EN 12373-1
Page 2 of 4
TECHNICAL FILE
R03.002_27/04/2016
Materials
Zamak
Installation
On a existing baseboard
Page 3 of 4
The complementary pieces of Novorodapie® Rehabit are made of Zamak. Zamak is a non ferrous alloy
of Zinc with Aluminium, Magnesium and Copper (UNE EN 1774) It’s tenacious, hard hardeness and has
a high mechanical strenght and an excellent plastic deformability. The nish that is applied on to the
complementary pieces, protect them and complement the Novorodapie® Rehabit.
*For further information see the Technical Files of the materials in www.emac.es
1. Clean the surface destinated to the placement of Novorodapie® Rehabit.
2. Join the complementary pieces to the Novorodapie® Rehabit. This previous step will make easier
the union of the set to the wall.
3. Thirdly apply the adhesive on the internal surface of Novorodapie® Rehabit, ensuring the contact
between the new and the old baseboard. You can use an adhesive type MS Sealing/Express
Adhesive from Fischer or similar.
4. Then place carefully the Novorodapie® on the existing skirting and press softly.
5. Clean the leftover material and let dry. After drying remove the protective lm.
Novorodapie® Rehabit is a prole made by extrusion of aluminium. The matt silver nish has been
anodized, improving mainly through this process their corrosion resistance, mechanical resistance and
appearance. The anodized applied has the quality seal Qualanod, which guarantees the quality of the
process and the resulting proles. This seal regulates several tests: appearance and color, thickness
measurements, sealing and impregnation control, abrasion resistance, lightfastness, acetic saline
chamber and nitric acid immersion.
The off-white nish has been lacquered, obtaining so a high quality and homogeneus surface. The
lacquering has the quality seal Qualicoat, which guarantees the quality of the process and the nal
products.
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
Without existing baseboard
1. Clean the surface destinated to place the Novorodapie® Rehabit.
2. Join the complementary pieces to the Novorodapie® Rehabit. This previous step will make easier
the union of the set to the wall.
3. Thirdly apply the adhesive on the surface of the “fastening-prole” and on the rear of the
Novorodapie®. You can use an adhesive type MS Sealing/Express Adhesive from Fischer or similar.
4. Then place carefully the Novorodapie® Rehabit on the wall, ensuring the “fastening-prole” makes
contact with the surface.
5. Clean the remaining material and let the dry. After drying, remove the protective lm.
6. *If you’re going to paint the wall, keep the lm until you have nished the operation
Novorodapie® Rehabit
TECHNICAL FILE
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical Files in www.emac.es
If you have any query, please contact our Technical Department in [email protected].
Technical Information
R03.002_27/04/2016
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) sales@emac.es // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
Novorodapie® Rehabit
Cleaning and maintenance
Indoors Wall tiling Recyclable
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral. If a preserving agent is applied, as well as keep a very thin layer of water repellent, note that it
can’t be yellow,attract dust or dirt or have iridescent effects.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Outdoors
Page 4 of 4
-
1
-
2
-
3
-
4
dans d''autres langues
- English: Emac NRH1365 User manual
Documents connexes
-
Emac NRE13656 Guide d'installation
-
-
-
-
Emac NRECAL1570BL Manuel utilisateur
-
-
-
-