R03.001_27/01/2017
TECHNICAL FILE
Novorodapie® MaxiSoho
Novorodapie® MaxiSoho is a skirting prole made of Maxi, an
exclusive Emac® material wich consists in PVC with vegetable
bers proceeding from organic waste recycling. This prole has
been designed to be installed as a skirting to protect the bottom
part of the walls from posible damage. Its design, with simple and
clean lines, makes contrast with the innovative nish similar to Wood
from the MaxiSoho range, being suitable for multiple environments
and trends. Optionally the skirting can be nished on the top with an
aluminum prole. Each prole is unique and different from others.
Novorodapie® Maxisoho, not two proles are the same.
Page 1 of 4
R03.001_27/01/2017
TECHNICAL FILE
General Features
Material: Maxi
Length: 2,5 ml
Dimensions:
h: 12,3 mm
a: 80 mm
Packaging: 10 ud./caja
Finishes:
White vintage - 161
Grey vintage - 159
Brown vintage - 160
Applications
Novorodapie® MaxiSoho is a prole made of our exclusive Maxi material designed to be installed as a
decorative skirting in joints between oor and wall.
La innovative MaxiSoho range can be installed both indoors or outdoors without losing functionality.
Materials
Page 2 of 4
Novorodapie® MaxiSoho
Technical Features and Tests
Resistance to chemical
agents
Very good except acetone, chromic acid and sulfu-
ric acid.
Water absorption
Very small absorption, high dimensional stability.
Retains its weight after dry.
Fire reaction M1 Classication
UNE 23.727-90 1R
Abrasion resistance Up to 2200 cycles without variation
UNE EN 438-2:2005
Aptdo. 23
Surface resistance to
staining
Resistance to acetone, coffee 176ºF/80ºC, bitumen,
hydrogen peroxyde 30%, sodium hydroxide 25%.
Acetone: surface degradation and blisters.
Rest: without changing.
Impact resistance
Spring: 34 N
Ball drop: 3,93ft/120 cm. maximum drop /
0,38 in./9,9 mm mark diameter
Cigarette burns Surface degradation
Resistance to humidity-
drying
> 20 cycles
UNE EN 14428
Maxi is a composite material made of PVC and vegetable bers. Those bers proceed from the recycling
of organic waste from agriculture. The waste reduction and the recycling of materials, help Maxi to fulll
with the Emac®’s commitment with the Environment and the sustainable construction.
Maxi has an original nish, similar to wood and natural elements, which adapts to different decorative
environments. The main advantage of this composite is that has the best qualities of PVC and vegetable
bers such as good mechanic strenght, abrasion resistance and dimensional stability among others.
R03.001_27/01/2017
TECHNICAL FILE
Installation
Advertencias
Page 3 of 4
1. Clean the surface to install the Novorodapie® MaxiSoho
2. Apply adhesive on the rear of the prole. You can use polyurethane mastic or mounting adhesive.
Apply a big amount to ensure a good adhesion.
3. Then, place carefully the Novorodapie® MaxiSoho on the wall and press softly until is correctly xed
4. Clean the leftover material and let dry.
Novorodapie® MaxiSoho
• The MaxiSoho range is manufactured by the exclusive controlled shade variation process, so each
piece is unique in color and texture and should not be considered manufacturing defect.
• It is recommended to take the proles by its central part, avoiding taking them by the tops to avoid
bending stresses which could cause scratches or breaks.
• Do not bend excessively the material. Store it always horizontally and in dry places.
• It must not be sanded, because that could affect to its surface appearance.
• It resists in moisture conditions but it is no recommended its use in submerged places.
• The ranges MaxiKenya, MaxiDakar and MaxiSoho are especially recommended for installations
outdoors because it has an excellent weatherability and remains unalterable to sun exposure.
• The Maxi material, like other construction materials, can suffer dimensional variations due to the
environment thermal changes. Outdoors, the installation in the hottest or colder hours of the
day should be avoided as it could change dimensionally the prole more han usual due to the
thermal change. It is recommendable keeping the material at environment temperature, out of the
packaging and always far from heat sources like direct sunlight.
• In installations with butt joint it is recommendable to keep a small separation by way of expansion
joint which should be greater the longer the proles to join are. Approximately 2 mm/m. This joint
can be sealed with elastic lling suitable for outdoors.
Take into account that the prole has an optimal position for
the installation, as it is shown in the drawing. The visible side
is the brushed and the grooved one is the side to adhere to the
wall. In the same way, the chamfered area should be on the rear,
not on the visible side. Once is installed, the skirting should ap-
pear as a rectangular prole with at sides.
You can optionally install a “L” shape alu-
minum prole on the top of the skirting,
creating an aesthetic contrast between
the metal prole and the maxi.
Available in several nishes.
TECHNICAL FILE
R03.001_27/01/2017
Los datos facilitados son meramente informativos y han sido obtenidos por nuestro proveedor o por Emac®.
En ningún caso constituyen garantía jurídica en cuanto a propiedades y/o funcionalidad de la aplicación del material
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical information
Page 4 of 4
Ecology Pack by Nerghal
Indoors
Wall tilingOutdoors
Novorodapie® MaxiSoho
Cleaning and maintenance
You can clean Maxi with a cloth dampened with only water or with water in a solution with a neutral
detergent 5%. The correct use of bleach doesn’t affect the material.
It is not recommended the use of chromic or sulphuric acids or polar solvents as toluene or acetone
for its cleaning.
Sustainable commitment
In Emac® we are aware about the value of moving towards a sustainable and respectful commitment
with the Environment. Therefore, in our commitment with nature, quality and service, in Emac® we
work with the following principles:
As result of this commitment and the strong investment in R&D, arises Maxi. Our material has the best
mechanical properties and functional requirements proved in different tests in specialized Institutions
of each sector. The use of bers proceeding from the recycling of organic waste of the Agriculture,
shows that it’s possible to obtain high-performance materials minimizing the environmental impact.
In the continuous search of excellence, Emac® continues betting every day on the innovation and
quality of their products and the strict fullling of their Environmental and Quality policies.
• We collaborate with companies that use harmless products and raw materials in their production
processes. They avoid so environmental risks in their processes and in the posterior transport.
• We develope innovative products that, plus solve the market requirements and fulll the
standards in the sector, doesn’t damage the Environment and help to its conservation and care.
• We continue investigating new processes and materials which allow us to continue fullling our
commitment.
-
1
-
2
-
3
-
4
Emac NRMXS159318 Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Emac NRMXS159318 User manual
Documents connexes
-
Emac NEMX821 Manuel utilisateur
-
Emac NJP1031 Manuel utilisateur
-
-
-
-
-
-
-
-