Emac NEMX821 Manuel utilisateur

Taper
Manuel utilisateur
R03.001_18/05/2011
TECHNICAL FILE
Novoescuadra
Maxi
General Features
Material: Maxi
Length: 8ft2in / 2.5 l.m.
Dimensions: a: 1” / 25 mm.
Packaging: 50 u./box
Finishes:
Applications
Novoescuadra Maxi is a prole intended to protect the edges of ceramic installations or other kind
of walls.
The installation of Maxi outdoors, could result in a natural variation in its original color, being slightly
higher in the range of redish colors. To avoid these possible color variations due to continuous sun
exposure, we recommend installing Maxi indoors.
Technical Features and Tests
Page 1 of 3
Prole with right angle section, intended to be installed as an edge
protector in walls or countertops. This prole is made of Maxi,
exclusive Emac® raw material which belongs to the family of
products WPC (Wood Plastic Composites). Maxi integrates vegetable
bers in its composition and contributes, this way, to preserve the
Environment. It is available in a wide range of trendy colors.
Resistance to chemical
agents
Very good except acetone, chromic acid and sulfu-
ric acid.
Water absorption
Very small absorption, high dimensional stability.
Retains its weight after dry.
Fire reaction M1 Classication
UNE 23.727-90 1R
Abrasion resistance Up to 2200 cycles without variation
UNE EN 438-2:2005
Aptdo. 23
Surface resistance to
staining
Resistance to acetone, coffee 176ºF/80ºC, bitumen,
hydrogen peroxyde 30%, sodium hydroxide 25%.
Acetone: surface degradation and blisters.
Rest: without changing.
Impact resistance
Spring: 34 N
Ball drop: 3,93ft/120 cm. maximum drop /
0,38 in./9,9 mm mark diameter
Cigarette burns Surface degradation
Resistance to humidity-
drying
> 20 cycles
UNE EN 14428
R03.001_18/05/2011
TECHNICAL FILE
Novoescuadra Maxi
Maxi
Materials
Installation
Sustainable commitment
Warnings
Page 2 of 3
Cleaning and maintenance
Maxi is a composite raw material made of PVC and vegetable bers. Those bers proceed from the
recycling of organic waste from agriculture. The waste reduction and the recycling of materials, help
Maxi to fulll with the Emac®’s commitment with the Environment and the sustainable construction.
Maxi has an original nish, similar to wood and natural elements, which adapts to different decorative
environments. The main advantage of this composite is that has the best qualities of PVC and vegetable
bers such as good mechanic strenght, abrasion resistance and dimensional stability among others.
Novoescuadra Maxi es an “easy to install” prole:
1. First clean the prole and the surface to install to facilitate a correct adhesion without imperfections.
2. Then, apply adhesive in the inner layers of the prole. This prole has transparent color so you’ll have
to use a colorless adhesive or silicone.
3. Align the prole to the edge and keep it pressed for a while.
4. Remove the leftover material if necessary and let dry.
You can clean Maxi with a soft cloth dampened just with water or in a solution with a neutral detergent
5%. The correct use of bleach does not affect the material.
It is not recommended the use of chromic or sulphuric acids or polar solvents as toluene or acetone
for its cleaning.
In Emac® we are aware about the value of moving towards a sustainable and respectful commitment
with the Environment. Therefore, in our commitment with nature, quality and service, in Emac® we
work with the following principles:
• Part of the composition of Maxi and MaxiKenya is natural, so it may have differences in tone that
must not be considered as manufacturing defects.
• It is recommended to take the proles by its central part and not take them by the tops, to avoid
bending stresses which could cause scratches or breaks.
• Do not bend excessively the material. Store it always horizontally and in dry places.
• It must not be sanded, because that could affect to its surface appearance.
• It resists in moisture conditions but it is not recommended its installation in submerged places.
• Remember that the installation of Maxi outdoors, could result in a natural variation of its original
color, being signicantly higher in the range of redish colors. For outdoor installations, we
recommend the MaxiKenya range, which has an excellent weatherability and remains unalterable
to sun exposure.
TECHNICAL FILE
R03.001_18/05/2011
You can nd out more information about the Technical Features of Emac®’s products by downloading
their Technical les from our website www.emac.es
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical Information
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
Novoescuadra Maxi
Indoors Wall tiling
Page 3 of 3
Ecology Pack by Nerghal
As result of this commitment and the strong investment in R&D, arises Maxi. Our material has the
best mechanical properties and functional requirements certied through different tests in specialized
Institutions of each sector. The use of bers proceding from the recycling of organic waste of the
Agriculture, shows that it’s posible to obtain high-performance materials minimizing the environmental
impact.
In the continuous search of excellence, Emac® continues betting every day on the innovation and
quality of their products and the strict fullling of their Environmental and Quality policies.
- We collaborate with companies that use harmless products and raw materials in their production
processes. They avoid so environmental risks in their processes and in the posterior transport.
- We develope innovative products that, plus solve the market requirements and fulll the standards
in the sector, doesn’t damage the Environment and help to its conservation and care.
- We continue investigating new processes and materials which allow us to continue fullling our
commitment.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Emac NEMX821 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues