Samsung HW-KM36 Manuel utilisateur

Marque: Samsung

Modèle: HW-KM36

Catégorie: Cheminées

Taper: Manuel utilisateur

For further information, refer to the Web Manual.

Web manual : www.Samsung.com Support

Product name search HW-KM36

HW-KM36

* Design and specifications are subject to change without prior notice.

User Manual

· 1 · English

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

This symbol indicates that this product has

included important literature concerning

operation and maintenance.

Class II product : This symbol indicates that it does not require a safety connection to electrical

earth (ground).

AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC

voltage.

DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.

Caution, Consult instructions for use : This symbol instructs the user to consult the user

manual for further safety related information.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation

instructions.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on

the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all times.

CAUTION (for Canada)

This equipment complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or

transmitter.

This device may automatically discontinue transmission if there is no information to transmit, or an operational

failure. Note that this is not intended to prohibit the transmission of control or signaling information or the use of

repetitive codes where required by the technology.

This Class B digital apparatus complies with Canadian ICES-003.

FCC Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

· 2 · English

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions listed

below. Keep these operating instructions handy for

future reference.

1) Read these instructions.

2) Keep these Instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other.

A grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachment/accessories specified by the

manufacturer.

12) Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination to avoid injury

from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

PRECAUTIONS

1. Ensure that the AC power supply in your house

complies with the power requirements listed on the

identification sticker located on the back of your

product. Install your product horizontally, on a

suitable base (furniture), with enough space around it

for ventilation (3~4 inches). Make sure the ventilation

slots are not covered.

Do not place the unit on amplifiers or other

equipment which may become hot. This unit is

designed for continuous use. To fully turn off the unit,

disconnect the AC plug from the wall outlet. Unplug

the unit if you intend to leave it unused for a long

period of time.

2. During thunderstorms, disconnect the AC plug from

the wall outlet. Voltage peaks due to lightning could

damage the unit.

3. Do not expose the unit to direct sunlight or other

heat sources. This could lead to overheating and

cause the unit to malfunction.

4. Protect the product from moisture (i.e. vases), and

excess heat (e.g. a fireplace) or equipment creating

strong magnetic or electric fields. Unplug the power

cable from the AC wall socket if the unit

malfunctions. Your product is not intended for

industrial use. It is for personal use only.

Condensation may occur if your product has been

stored in cold temperatures. If transporting the unit

during the winter, wait approximately 2 hours until the

unit has reached room temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the environment.

Do not dispose of the battery in the general

household trash. Do not expose the battery to

excess heat, direct sunlight, or fire. Do not short

circuit, disassemble, or overheat the battery.

Danger of explosion if the battery is replaced

incorrectly. Replace only with the same or equivalent

type.

WARNING: DO NOT INGEST BATTERY.

CHEMICAL BURN HAZARD.

The remote control supplied withthis product contains a

coin/button cell battery. If the coin/button cell battery is

swallowed, it can cause severe internal burns in just 2

hours and can lead to death. Keep new and used

batteries away from children. If the battery compartment

does not close securely, stop using the product and

keep it away from children. If you think batteries might

have been swallowed or placed inside any part of the

body, seek immediate medical attention.

· 3 · English

CHECKING THE COMPONENTS

Right Side of the Soundbar

Soundbar Main Unit

3 AC/DC Adapter

4 Power Cord

Top

Remote Control /

Battery

Subwoofer Optical Cable

2 Power Cord

1 AC/DC Adapter

c The package also includes wall mounting hardware. See page 8.

c The Micro USB to USB adapter is sold separately. To purchase, contact a Samsung Service Center or

Samsung Customer Care.

CONNECTING ELECTRICAL POWER

Use the power components (1, 2, 3, 4) to connect the power supplies in the following order:

Subwoofer  Soundbar Main Unit

c For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of the Soundbar Main Unit)

DC 19V

(Power Jack)

1 AC/DC

Adapter

2 Power Cord

DC 19V

(Power Jack)

3 AC/DC

Adapter

4 Power Cord

Connecting

electrical power

Connecting

electrical power

Rear of Subwoofer Bottom of the Soundbar Main Unit

c Make sure to rest the AC/DC Adapters flat on a table or the floor. If you place an AC/DC Adapter so that it is

hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter

and cause the Adapter to malfunction.

· 4 · English

CONNECTING THE SUBWOOFER TO THE MAIN UNIT

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the main unit.

Main Unit

Subwoofer

The main unit and subwoofer should link (connect wirelessly) automatically when the main unit and subwoofer are

turned on. When auto-connection is complete, the blue indicator on the rear of the subwoofer stops blinking and

glows blue continuously. The subwoofer's LED indicator modes are listed below:

blue

Auto-connection is complete.

blue

blinking

Auto-connection is not complete.

blue

is not lit

a. Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.

b. If the power cord is plugged in correctly, check the main unit. If your main unit is off (in standby

mode), the subwoofer will also be in standby mode and the blue LED won't be lit.

c If the indicator on the rear of the subwoofer does not glow continuously in blue, the subwoofer has not

connected. If this occurs, follow the directions below to connect the subwoofer manually.

c Important: Before you begin, put the battery into the remote. See page 12 for instructions.

1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.

2. Press the ID SET button on the rear of the subwoofer with a small, pointed object for 5 seconds.

c The LINK indicator (Blue LED) on the subwoofer blinks quickly.

3. Press the

button on your remote control for 5 seconds while the main unit is turned OFF.

4. The ID SET message appears on the display of the main unit for a short period of time, and then disappears.

ID SET

· 5 · English

5. While the subwoofer's indicator is blinking blue, press the button on your remote control or on the right

side of the main unit to turn on the main unit.

6. The connection is complete if the indicator on the rear of the subwoofer stops blinking and glows

continuously.

c If the connection process fails, the blue indicator will flash continuously. Go back to Step 2 and start again.

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

c Important: Before you begin, put the battery into the remote. See page 12 for instructions.

Method 1. Connecting with a Cable

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

DC 19V

OPTICAL OUT

DIGITAL AUDIO IN

(OPTICAL)

Optical Cable

Bottom of main unit

Check the DIGITAL AUDIO IN (OPTICAL)

port of the main unit.

Check the OPTICAL OUT

port of your TV.

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with

a digital optical cable.

2. Press the

button on the right side of the Soundbar or the SOURCE button on the remote control to

select the D.IN mode.

D.IN

c If you have connected the main unit to a TV with a digital optical cable, you can set Auto Power Link to ON

and have the Soundbar turn on automatically when you turn the TV on.

c This function is only available when the Soundbar is in the D.IN mode.

· 6 · English

Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)

1. Turn on your Samsung TV and the Soundbar.

2. Select TV mode in your Soundbar display by pressing the

button on the right side of the Soundbar or

the SOURCE button on your remote control. (Modes are displayed in the following order: D.IN → AUX → BT

→ TV → USB.)

3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote

control.

Samsung Audio Device detected.

Do you want to hear TV sound

through this device?

Yes No

Select <Yes> with your TV remote control.

4. The Soundbar outputs TV sound.

c If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select Add

New Device, and set Add New Device to ON. Then, try again.

c If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the volume

with the Soundbar's remote or the TV's remote. You can also have the Soundbar turn on and off automatically

when you turn the TV on or off by setting the Bluetooth POWER On function to On. See page 12.

c The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since

2012.

c If you want to disconnect the existing connection to your TV and establish a new connection to another TV,

press the & button on your remote control for more than 5 seconds.

c In the TV SoundConnect mode, the Soundbar cannot be paired or connected to another Bluetooth device.

c Do not place electronic devices or metallic objects on top of the product.

e.g., Wired/wireless router, set-top box, or modem.

c Placing the product on the floor may degrade wireless network performance, depending on the floor material.

· 7 · English

CONNECTING TO AN EXTERNAL DEVICE

Optical Cable

You can enjoy sound from separate external devices such as a BD player/game console/set-top box, etc. by

connecting them to your Soundbar.

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

DC 19V

DIGITAL AUDIO IN

(OPTICAL)

OPTICAL OUT

Bottom of Soundbar

External Device

Optical Cable

1. Connect an Optical Cable as shown in the picture above.

2. Press the

button on the right side of your Soundbar or the SOURCE button on your remote control to

select D.IN mode.

3. The Soundbar shows D.IN on its display and outputs sound from the connected device.

USB

You can play music files located on USB storage devices through the Soundbar.

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

DC 19V

USB (5V 0.5A)

Display

USB port

Micro USB to USB

adapter

(not supplied)

1. Connect a Micro USB to USB adapter with a male USB 2.0 Micro USB plug (Type B) on one end and a

standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.

c The Micro USB to USB adapter is sold separately. To purchase, contact a Samsung Service Centre or

Samsung Customer Care.

2. Connect your USB device to the female end of the adapter cable.

3. Press the

button on the main unit’s right side or the SOURCE button on the remote control to select the

USB mode.

4. USB appears on the display screen.

•

The Soundbar connection to the USB device is complete.

•

The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more

than 5 minutes.

· 8 · English

INSTALLING THE WALL

MOUNT

You can use the wall mount bracket to mount this unit

on a wall.

I nstallation Precautions

• Install on a vertical wall only.

• For the installation, avoid a location with high

temperature or humidity, or a wall that cannot

sustain the weight of the set.

• Check the strength of the wall. If the wall is not

strong enough to support the unit, reinforce the

wall or install the unit on a different wall that can

support the unit's weight.

• Purchase and use the fixing screws or anchors

appropriate for the kind of wall you have (plaster

board, iron board, wood, etc.). If possible, fix the

support screws into wall studs.

• Purchase wall mounting screws according to the

type and thickness of the wall you will mount the

Soundbar on.

- Diameter: M5

- Length: 1 3/8 inches or longer recommended.

• Connect cables from the unit to external devices

before you install it on the wall.

• Make sure the unit is turned off and unplugged

before you install it. Otherwise, it may cause an

electric shock.

Accessories for Wall-mounting

(Wall Mount L) (Wall Mount R)

Bracket-Wall Mount (2 EA)

Holder-Screw (2 EA) Screw (2 EA)

Wall Mount Guide

1. Place the Wall Mount Guide against the wall

surface.

• The Wall Mount Guide must be level.

• If your TV is mounted on the wall, install the

Soundbar at least 2 inches (5 cm) below the

TV.

2 inches or more

· 9 · English

2. Align the Wall Mount Guide's Center Line with the

center of your TV (if you are mounting the

Soundbar below your TV), and then fix the Wall

Mount Guide to the wall using tape.

c If you are not mounting below a TV, place the

Center Line in the center of the installation area.

Center Line

Push a pen tip or sharpened pencil tip through the

center of the B-TYPE images on each end of the

Guide to mark the holes for the supporting

screws, and then remove the Wall Mount Guide.

4. Using an appropriately sized drill bit, drill a hole in

the wall at each marking.

c If the markings do not correspond to the

positions of studs, make sure you insert

appropriate anchors or mollies into the holes

before you insert the support screws. If you use

anchors or mollies, make sure the holes you drill

are large enough for the anchors or mollies you

use.

5. Push a screw (not supplied) through each

Holder-Screw, and then screw each screw

firmly into a support screw hole.

6. Use the two Screws (M4 x L14) to attach both

Bracket-Wall Mount L and R to the Soundbar's

bottom. For a proper fit, make sure to align the

bumps on the Soundbar to the holes on the

brackets.

• When assembling, make sure the hanger part

Bracket-Wall Mounts are located behind

the rear of the Soundbar. See the illustration

below.

Rear of Soundbar

Right end of Soundbar

• The left and right mounts are different shapes.

Make sure to position them correctly.

Wall Mount LWall Mount R

· 10 · English

7. Install the Soundbar with the attached Bracket-

Wall Mount by hanging the Bracket-Wall Mount

on the Holder-Screws on the wall.

• Slightly tilt the Soundbar to insert both

Holder-Screw heads into Bracket-Wall

Mount holes. Push the Soundbar in the

direction of the arrow to make sure both sides

are firmly fixed.

D ETACHING THE SOUNDBAR

FROM THE WALL

1. To separate the Soundbar from the wall, push it in

the direction of the arrow, tilt it up slightly, and

then pull it away from the wall as shown.

c Do not hang onto the installed unit and avoid

striking or dropping the unit.

c Secure the unit firmly to the wall so that it does

not fall off. If the unit falls off, it may cause an

injury or damage the product.

c When the unit is installed on a wall, please make

sure that children do not pull any of the

connecting cables, as this may cause it to fall.

c For the optimal performance of a wall mount

installation, install the speaker system at least

2 inches (5 cm) below the TV, if the TV is

mounted on the wall.

c For your safety, if you do not mount the unit on

the wall, install it on a secure, flat surface where it

is unlikely to fall.

· 11 · English

REMOTE CONTROL

Power

Turns the Soundbar on and off.

Volume

Adjusts the volume level of the unit.

Play /

Pause

Plays and pauses a file.

Skip

Forward

Selects the next file.

Skip

Back

Selects the previous file.

Repeat

Press to set the Repeat function during music playback from a USB device.

• OFF-REPEAT : Cancels Repeat Playback.

• TRACK-REPEAT : Plays a track repeatedly.

• ALL-REPEAT : Plays all tracks repeatedly.

• RANDOM-REPEAT : Plays tracks in random order repeatedly. (A track that

has already been played may be played again.)

SOUND

EFFECT

You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE,

SPORTS, MOVIE, and NIGHT MODE.

c NIGHT MODE

When changing a channel or music source, the volume difference between

different music input sources is automatically adjusted to be suitable for listening.

SURROUND

SOUND

The Surround Sound function adds depth and a sense of space to sound.

Each time you press this button, ON-SURROUND SOUND and OFF-

SURROUND SOUND alternate.

Each time you press and hold this button for 5 seconds, ON-TV REMOTE and

OFF-TV REMOTE alternate.

SOURCE

Press to select a source connected to the Soundbar.

Mute

Sets the volume temporarily to 0.

Press again to cancel.

· 12 · English

Installing the Battery in the Remote Control

1. Use a suitable coin to turn

the remote control's battery

cover counterclockwise to

remove it as shown in the

figure above.

2. Insert a 3V lithium battery. Keep the

positive (+) pole facing up when

inserting the battery. Put the battery

cover on, and then align the '●'

marks side by side as shown in the

figure above.

3. Use a suitable coin to turn

the remote control battery

cover clockwise as far as it

will go to fix it in place.

Controlling the Soundbar using Your TV Remote Control

1. Press and hold the SOUND button for more than 5 seconds while the Soundbar is turned on.

2. "ON - TV REMOTE" appears on the Soundbar's display.

3. In the TV's menu, set the TV speaker to external speaker.

c TV menus differ by manufacturer and model. Refer to the TV's user manual for further information.

c Only the VOL +/- and MUTE buttons will be available to control the Soundbar.

c This function is not available when the Soundbar is in the TV SoundConnect mode.

c Manufacturers supporting this function:

• VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA

• This function may not be compatible with your TV's remote depending on the remote control's

manufacturer.

c To turn off this function, press the SOUND button for 5 seconds. "OFF - TV REMOTE" appears on the

Soundbar's display.

Bluetooth

POWER

Press to turn the Bluetooth POWER On

function on and off. When the Bluetooth

POWER On function is on,

ON - BLUETOOTH POWER appears in

the Soundbar’s display.

SOUND

CONTROL

You can select from TREBLE, BASS,

SUBWOOFER LEVEL, or AUDIO SYNC.

• Press to select TREBLE, BASS,

SUBWOOFER LEVEL, or AUDIO SYNC.

Then, use the ,  buttons to adjust the

Treble or Bass volume from -6 ~ +6,

SUBWOOFER LEVEL volume from -12, -6 ~

+6.

• If the video and audio between the TV and

your Soundbar are not synchronized, select

the AUDIO SYNC in Sound Control, and

then set audio delay between 0~300

milliseconds by using the ,  buttons.

• Each time you press and hold this  button,

ON-POWER LINK and OFF-POWER LINK

alternate.

· 13 · English

TROUBLESHOOTING

Before seeking assistance, check the following.

The unit will not turn on.

Is the power cord plugged into the outlet?

 Connect the power plug to the outlet.

A function does not work when the button is

pressed.

Is there static electricity in the air?

 Disconnect the power plug and connect it again.

Sound is not produced.

Is the Mute function on?



Press the (Mute) button to cancel the function.

Is the volume set to minimum?

 Adjust the Volume.

The remote control does not work.

Are the batteries drained?

 Replace with new batteries.

Is the distance between the remote control and main

unit too far?

 Move closer to the unit.

The TV SoundConnect (TV pairing) failed.

Does your TV support TV SoundConnect?

 TV SoundConnect is supported by some

Samsung TVs released from 2012 on. Check

your TV to see if it supports TV SoundConnect.

Is your TV firmware the latest version?

 Update your TV with the latest firmware.

Does an error occur when connecting?

 Contact the Samsung Call Center.

Reset the TV mode and connect again.

 Press and hold the & button for 5 seconds to

reset the TV SoundConnect connection.

The blue indicator on the rear of the subwoofer

is not lit and the subwoofer is not producing

sound.

Is the main unit power on?

 Check the power cord. If the power cord is

plugged in correctly, check the main unit. If your

main unit is off (in standby mode), the subwoofer

will also be in standby mode and the blue LED

won't be lit.

Your subwoofer may not be connected to the main

unit of the product.

 Try to connect your subwoofer again.

LICENSE

Manufactured under license from Dolby

Laboratories. Dolby, Dolby Audio, Pro Logic, and

the double-D symbol are trademarks of Dolby

Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing

Limited. DTS, the Symbol, DTS in combination with

the Symbol, and DTS 2.0 Channel are registered

trademarks or trademarks of DTS, Inc. in the United

States and/or other countries. © DTS, Inc. All Rights

Reserved.

OPEN SOURCE LICENSE

NOTICE

To send inquiries and requests regarding open

sources, contact Samsung via Email

([email protected]).

· 14 · English

IMPORTANT NOTE ABOUT SERVICE

• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

appearance.

SPECIFICATIONS

Model Name HW-KM36

USB 5V / 0.5A

Weight 3.3 lbs (1.5 Kg)

Dimensions (W x H x D) 35.7 x 2.1 x 2.8 inches (907.5 x 53.5 x 70.5 mm)

Operating Temperature Range +41°F to +95°F (+5°C to +35°C)

Operating Humidity Range 10 % to 75 %

AMPLIFIER

Rated Output power

35 W/CH x 2, 6 ohm

Supported play formats

(DTS 2.0 sound is played in DTS format.)

LPCM 2ch, Dolby Audio™

(supporting Dolby® Digital), DTS

Subwoofer Name PS-WK360

Weight 6.4 lbs (2.9 Kg)

Dimensions (W x H x D)

6.1 x 11.8 x 11.5 inches (155.0 x 300.0 x 293.0 mm)

AMPLIFIER

Rated Output power 60 W, 3 ohm

• Nominal specification

– Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

– Weight and dimensions are approximate.

– For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of main unit)

LIMITED WARRANTY TO ORIGINAL PURCHASER

Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material

and workmanship.

SECA further warrants that if this product falls to operate properly within the specified warranty

period and the failure is due to improper workmanship or defective materials, SECA will repair or

replace the product at its option.

All warranty repairs must be performed by a SECA Authorized Service Center. (The name and

address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)

LABOR

One year (Carry- in)

PARTS

One year

On carry-in models, transportation to and from the service center is the customer’s responsibility.

The original dated sales receipt must be retained by the customer and is the only acceptable proof

of purchase. It must be presented to the authorized service center at the time service is requested.

EXCLUSIONS (WHAT IS NOT COVERED)

This warranty does not cover damage due to accident, fire, flood and/ or other acts of God;

misuse,incorrect line voltage, improper installation, improper or unauthorized repairs, commercial

use or damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered

under this warranty. Customer adjustments which are explained in the instruction manual are not

covered under the terms of this warranty. This warranty will automatically be voided for any unit

found with a missing or altered serial number. This warranty is valid only on products purchased

and used in Canada.

Samsung Electronics Canada Inc

2050 Derry Rd West

Mississauga, On. L5N 0B9

Tel: 1-800-SAMSUNG (726-7864)

Fax: (905) 542- 1199

Website: www.samsung.com/ca

HEADQUARTERS

Samsung Electronics Canada Inc. 2050 Derry Road

West, Mississauga, Ontario L5N 0B9 Canada

TEL: 1-800-SAMSUNG (1-800-726-7864)

www.samsung.com/ca/support

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer

care Centre.

Country Contact Center



Web Site

North America

CANADA 1-800-SAMSUNG (726-7864)

www.samsung.com/ca/support (English)

www.samsung.com/ca_fr/support (French)

U.S.A 1-800-SAMSUNG (726-7864)

www.samsung.com/us/support

Pour de plus amples renseignements, consultez le guide de l’utilisateur en ligne.

Guide Web : www.Samsung.com Assistance

Recherche du nom de produit HW-KM36

HW-KM36

* Cette conception et ces spécifications techniques sont susceptibles d'être modifiées sans préavis.

Guide d'utilisation

· 1 · Français

INFORMATIONS RELATIVES À LA SÉCURITÉ

AVERTISSEMENTS

POUR ÉVITER LES RISQUES DE CHOC ÉLECTRIQUE, NE DÉMONTEZ PAS LE CAPOT.

L’APPAREIL NE CONTIENT PAS DE PIÈCES RÉPARABLES PAR L’UTILISATEUR. S’ADRESSER À UN SERVICE

APRÈS-VENTE QUALIFIÉ.

MISE EN GARDE

RISQUE DE CHOC

ÉLECTRIQUE NE PAS OUVRIR

Ce symbole indique la présence d'une haute

tension à l'intérieur. Tout contact avec une

pièce interne de l'appareil présente un danger.

Ce symbole vous informe qu'une

documentation importante relative au

fonctionnement et à l'entretien est fournie avec

le produit.

Produit de catégorie II : Ce symbole indique qu'il ne nécessite pas une connextion de sécurité

à la terre (masse).

Tension CA : Ce symbole indique que la tension nominale est la tension CA.

Tension CC : Ce symbole indique que la tension nominale est la tension CC.

Attention, consultez les instructions aux fins d'utilisation : Ce symbole indique à l'utilisateur

qu'il doit consulter le guide d'utilisation pour avoir de l'information au sujet de la sécurité.

AVERTISSEMENT

• Afin de diminuer les risques d’incendie ou de choc électrique, n’exposez pas cet appareil à la pluie ou à

l’humidité.

• Pour éviter des blessures, cet appareil doit être solidement fixé au plancher/au mur conformément aux

directives d’installation.

MISE EN GARDE

• Veillez à éviter toute projection sur l'appareil. Ne placez jamais de récipients contenant un liquide (ex. : vase)

dessus.

• La prise d’alimentation fait office de système de déconnexion. Elle doit donc rester disponible en permanence.

ATTENTION (Pour le Canada)

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de

brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

Cet appareil et son ou ses antennes ne doivent pas etre installés a proximité ou etre utilisés conjointement avec

une autre antenne ou un autre émetteur..

Le dispositif pourrait automatiquement cesser d’émettre en cas d’absence d’informations à transmettre, ou une

défaillance opérationnelle. Notez que ce n’est pas l’intention d’interdire la transmission des informations de

contrôle ou de signalisation ou l’utilisation de codes répétitifs lorsque requis par la technologie.

Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.

Declaration d’exposition aux radiations:

Cet equipement est conforme aux limites d’exposition aux rayonnements IC RSS-102 etablies pour un

environnement non controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm de distance

entre la source de rayonnement et votre corps.

· 2 · Français

Consignes de sécurité importantes

Lisez attentivement ces consignes avant d'utiliser

l'appareil. Veillez à respecter toutes les consignes

répertoriées ci-après. Conservez ces instructions à

portée de main pour vous y référer ultérieurement.

1) Lisez attentivement ces consignes.

2) Conservez-les précieusement.

3) Tenez compte de tous les avertissements

mentionnés.

4) Respectez toutes les instructions sans exception.

5) N'utilisez pas cet appareil à proximité de l'eau.

6) Nettoyez-le à l'aide d'un tissu sec.

7) Ne bloquez pas les ouvertures de ventilation.

Installez l'appareil conformément aux instructions

du fabricant.

8) N'installez pas le lecteur à proximité d’une source

de chaleur de type radiateur, registre de chaleur,

cuisinière ou tout autre appareil (y compris les

récepteurs AV) générateur de chaleur.

9) Ne désactivez pas le dispositif de sécurité de la

fiche de mise à la terre ou de la fiche polarisée.

Une fiche polarisée comporte deux lames dont

l’une est plus large que l’autre. Une fiche de mise

à la terre comporte deux lames et une troisième

broche de mise à la terre. La lame la plus large et

la troisième broche sont destinées à assurer votre

sécurité. Si la fiche fournie ne s'insère pas dans

la prise utilisée, faites appel à un électricien pour

faire remplacer celle-ci.

10) Placez le cordon d'alimentation de sorte qu'il ne

puisse être ni piétiné ni pincé, particulièrement au

niveau de la fiche, de la prise de courant et du

point de sortie de l'appareil.

11) Utilisez exclusivement les fixations/ accessoires

spécifiés par le fabricant.

12) Utilisez exclusivement le meuble à

roulettes, le socle, le trépied, le

support ou la table recommandés

par le fabricant ou vendus avec

l’appareil. Si l’appareil est posé sur

un meuble à roulettes, déplacez

l’ensemble avec précaution pour éviter de faire

tomber le lecteur et de vous blesser.

13) Débranchez l’appareil en cas d'orage ou lorsqu’il

est inutilisé pendant une période prolongée.

14) Confiez toutes les réparations à un technicien

qualifié. Votre appareil doit impérativement être

réparé lorsqu’il a été endommagé de quelque

manière que ce soit : détérioration du cordon ou

de la fiche d’alimentation, projection de liquide

sur l’appareil, chute d’objets à l’intérieur de

l’appareil, exposition à la pluie ou à l’humidité,

dysfonctionnement, chute.

PRÉCAUTIONS

1. Assurez-vous que l'alimentation c.a. de votre

domicile satisfait aux normes inscrites sur l'étiquette

d'identification située à l'arrière du produit. Installez

votre produit horizontalement, sur un socle approprié

(meuble), en laissant un espace suffisant pour la

ventilation sur le pourtour 3~4 po. Faites attention à

ne pas obstruer les orifices de ventilation. Ne posez

pas l'ensemble sur un amplificateur ou un autre

appareil susceptible de chauffer. Cet ensemble est

conçu pour une utilisation en continu. Pour éteindre

totalement l'appareil, débranchez la fiche c.a. de la

prise murale. Débranchez l'appareil si vous prévoyez

une longue période d'inactivité.

2. En cas d'orage, débranchez la fiche de l'appareil de

la prise murale. Les surtensions occasionnées par

l'orage pourraient endommager votre appareil.

3. N'exposez pas l'ensemble aux rayons directs du

soleil ou à toute autre source de chaleur. Cela

pourrait causer une surchauffe du fil et causer un

dysfonctionnement de l’unité.

4. Protégez le produit de l'humidité (comme les vases) et

d'une chaleur excessive (comme une cheminée) ou de

tout équipement capable de créer des champs

magnétiques ou électriques. Débranchez le câble

d'alimentation en cas de dysfonctionnement. Votre

produit n'est pas prévu pour un usage industriel. Ce

produit ne peut être utilisé qu'à des fins personnelles.

Une condensation peut se former si le produit ou un

disque a été stocké à basse température. Si vous

devez transporter l'ensemble pendant l'hiver, attendez

environ 2 heures que l'appareil ait atteint la

température de la pièce avant de l'utiliser.

5. Les piles utilisées dans ce produit peuvent contenir des

produits chimiques dangereux pour l'environnement.

Ne jetez pas les piles dans votre poubelle habituelle. Ne

vous débarrassez pas des piles en les faisant brûler.

Les piles ne doivent pas être court-circuitées,

démontées ou subir de surchauffe.

Le remplacement incorrect des piles peut entraîner un

danger d'explosion. Remplacez-les uniquement par

des produits similaires ou équivalents.

AVERTISSEMENT, NE PAS INGÉRER LA

PILE, RISQUE DE BRÛLURE CHIMIQUE

[La télécommande fournie avec] Ce produit contient une

pile bouton. Si la pile bouton est avalée, elle risque de

causer, en quelques heures seulement, des brûlures

internes graves pouvant entraîner la mort. Conservez les

piles neuves et usées hors de portée des enfants. Si le

compartiment des piles ne se ferme pas correctement,

arrêtez d'utiliser le produit et tenez-le à l’écart des

enfants. Si vous pensez que des piles ont été ingérées

ou insérées à l’intérieur d’une partie du corps, consultez

immédiatement un médecin.

(

La page charge ...

Samsung HW-KM36 Manuel utilisateur

Marque: Samsung

Modèle: HW-KM36

Catégorie: Cheminées

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Samsung HW-KM36 User manual

Documents connexes

Autres documents

Middle Atlantic Products FlexView FVS IFP Series Guide d'installation