Fhiaba FI36BI-LO Guide d'installation

Taper
Guide d'installation
INSTALLATION GUIDE
NOTICE D’INSTALLATION
EN
FR
IMPORTANT
Dimensions in parentheses are in inches: mm(in).
Weights in parentheses are in pounds: kg (lb).
Temperatures in parentheses are in Fahrenheit degrees: °C(°F)
1
3
3
4
5
6
7
8
8
9
10
13
14
16
17
18
19
20
21
22
23
25
26
28
30
31
32
33
34
Installation Guide
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Index
Page
Important Instructions
Important safety instructions
Children safety
Technical requirements
Appliance features and installation requirements
Integrated installation niche features
StandPlus installation niche features
X-Pro installation niche features
Preparing to install
Transport to installation site and unpacking
Niche Dimensions and Installation Styles: Integrated Series
Niche Dimensions and Installation Styles: StandPlus and X-Pro Series
Installation types
Electrical and Water connection
Levelling
Panels mounting
Decorative door and Bottom-Drawer panels layout
Decorative panels layout for Fridge with one Bottom-Drawer
Decorative panels layout for Fridge with two Bottom-Drawers
Decorative panels layout for Fridge with Glass door and one Bottom-Drawer
Decorative panels layout for Fridge with Glass door and two Bottom-Drawers
Panels Dimensions One Bottom - Drawer
Panels Dimensions Two Bottom - Drawers
Mounting the handles on Integrated units
Mounting panels to the door and the drawer of Integrated units
Installation
Built-in installation of single appliance
Built-in installation of two or more appliances
Completing the installation
Anti-tipping safety assembly
Mounting handles on stainless front
Air circulation
Ventilation
Post installation control
Start Up
2
www.fhiaba.com · www.thevettagroup.com
3
Installation Guide
Series: All
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Symbols used in the Guide
FI24 w: 599 mm (23 5/8”)/ h: 2120 mm (83 1/2”)/ d: 610 mm (24”)
FI30 w: 749 mm (29 1/2”)/ h: 2120 mm (83 1/2”)/ d: 610 mm (24”)
FI36 w: 899 mm (35 3/8”)/ h: 2120 mm (83 1/2”)/ d: 610 mm (24”)
FM24 w: 599 mm (23 5/8”)/ h: 2120 mm (83 1/2”)/ d: 629 mm (24 3/4”)
FM36 w: 899 mm (35 3/8”)/h: 2120 mm (83 1/2”)/ d: 629 mm (24 3/4”)
FP24 w: 599 mm (23 5/8”)/ h: 2120 mm (83 1/2”)/ d: 635 mm (25”)
FP30 w: 749 mm (29 1/2”)/ h: 2120 mm (83 1/2”)/ d: 635 mm (25”)
FP36 w: 899 mm (35 3/8”)/ h: 2120 mm (83 1/2”)/ d: 635 mm (25”)
24” Series w: 650 mm (25 5/8”) / h: 2260 mm (89”) / d: 800 mm (31 1/2”)
30” Series w: 800 mm (31 1/2”) / h: 2260 mm (89”) / d: 800 mm (31 1/2”)
36” Series w: 950 mm (37 3/8”) / h: 2260 mm (89”) / d: 800 mm (31 1/2”)
24” Series up to 230 kg (507 lb)
30” Series up to 275 kg (606 lb)
36” Series up to 295 kg (650 lb)
North America Version: 110V 60Hz
North America Version: 15 A
from 0.05 MPa to 0.5 MPa (0.5 Bar - 5 Bar)
3/4” female attachment
Customized panels mounting Kit
Anti-tipping Kit (B04000200)
Lateral connecting kit (KCLIT/KCLIH)
4 mm (1/8”) allen wrench
Phillips head screwdriver
wood and percussion drill
2.5 mm (1/8”) bit for wood
8 mm (3/8”) bit for walls
17 mm (3/4”) wrench
13 mm (1/2”) socket
Appliance dimensions
Integrated
Appliance dimensions
StandPlus
Appliance dimensions
X-Pro
Appliance dimensions
with packaging
Weight with packaging
Voltage
Power supply cable
Potable water supply pressure
Water supply tube
Provided installation accessories
Additional equipment necessary
Adjusting height of the rear rollers
If this appliance is replacing an existing appliance which must be
removed or disposed of, make sure that it does not become a
dangerous trap for children by cutting its power supply cable and
rendering it impossible to close the door.
Use the same caution at the end of the lifespan of the new ap-
pliance.
Note
Tips for the correct use of the appliance
Warning
directions to prevent injury
Important
Directions to avoid appliance damage
Important safely instruction
Children safety
Appliance features and installation requirements
4
140 (5 ½”) 140 (5 ½”)
100 (4”)
100 (4”)
A A
min 2134 (84”)
FI36: 900 (35 ½”)
FI24: 600 (23 ¾”)
FI30: 750 (29 5⁄8”)
A
2134 mm (84”)
FI36: 900 mm (35 1/2”)
FI30: 750 mm (29 5/8”)
FI24: 600 mm (23 3/4”)
FI36: 1470 mm (57 7/8”)
FI30: 1320 mm (52”)
FI24: 1170 mm (46”)
105°
FI36: 899 mm (35 3/8”)
FI30: 749 mm (29 1/2”)
FI24: 599 mm (23 5/8”)
2120 mm (83 1/2”) + 25 mm (1”)
610 mm (24”)
610 (24”)
560 (22”)
610 (24”)
560 (22”)
1293 (50 7⁄8” )
474 (18 5⁄8”)
231 (9
1⁄8”
) +
25 (1”)
500 (19 ¾”) 500 (19 ¾”)
248 (9
¾”
)
+ 25 (1”)
231 (9
1⁄8”
) +
25 (1”)
248 (9
¾”
)
+ 25 (1”)
20 (¾”)
20 (¾”)10 (3⁄8”)
721 (28 3⁄8”) +25 (1”)
2120 (83 ½”) +25 (1”)
846 (33 ¼”) +25 (1”)
2120 (83 ½”) +25 (1”)
1168(46”)
330 (13”)
259 (10
¼”
)
992 (39”)
FI36: 1470 (57 7⁄8”)
FI30: 1320 (52”)
FI24: 1170 (46”)
FI36: 160 (6 3⁄8”)
FI30: 125 (5”)
FI24: 90 (3 ½”)
560 (22”)
610 (24”)
FI36: 899 (35 3⁄8”)
FI30: 749 (29 ½”)
FI24: 599 (23 5⁄8”)
10 (3⁄8”)
105°
www.fhiaba.com · www.thevettagroup.com
Installation niche features: Integrated Series
area to be left clear for the anti-tipping brackets
Niche Height
Niche Width
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door (without panel)
5
A A
min 2134 (84”)
140 (5 ½”) 140 (5 ½”)
100 (4”)
100 (4”)
FM36: 900 (35 ½”)
FM24: 600 (23 ¾”)
min 10 (3⁄8”)
A
2134 mm (84”)
FM36: 900 mm (35 1/2”)
FM24: 600 mm (23 3/4”)
FM36: 1470 mm (57 7/8”)
FM24: 1170 mm (46”)
105°
FM36: 899 mm (35 3/8”)
FM24: 599 mm (23 5/8”)
2120 mm (83 1/2”) + 25 mm (1”)
629 mm (24 3/4”)
560 (22”)
2120 (83 ½”) +25 (1”)
613 (24 1⁄8”)+25 (1”)
629 (24 ¾”)
615 (24 ¼”)
128 (5) + 25 (1”)
666 (26 ¼”)
485 (19 1⁄8”)
1296 (50”)
195 (7 5⁄8”)
8 (3⁄8”)
8 (3⁄8”)
1010 (39 ¾”)
FM36: 1470 (57 7⁄8”)
FM24: 1170 (46”)
FM36: 230 (9)
FM24: 160 (6 ¼”)
560 (22”)
FM36: 899 (35 5⁄8”)
FM24: 599 (23 5⁄8”)
10 (3⁄8”)
105°
629 (24 ¾”)
37 (1 ½”)
69 (2 ¾”)
Installation Guide
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Installation niche features: StandPlus Series
Flush
IMPORTANT
area to be left clear for the anti-tipping brackets
Niche Height
Niche Width
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door
6
min 10 (3⁄8”)
A
2134 mm (84”)
FP36: 900 mm (35 1/2”)
FP30: 750 mm (29 5/8”)
FP24: 600 mm (23 3/4”)
FP36: 1470 mm (57 7/8”)
FP30: 1320 mm (52”)
FP24: 1170 mm (46”)
105°
FP36: 899 mm (35 3/8”)
FP30: 749 mm (29 1/2”)
FP24: 599 mm (23 5/8”)
2120 mm (83 1/2”) + 25 mm (1”)
635 mm (25”)
FP36: 900 (35 ½”)
FP24: 600 (23 ¾”)
FP30: 750 (29 5⁄8”)
A A
min 2134 (84”)
140 (5 ½”) 140 (5 ½”)
100 (4”)
100 (4”)
560 (22”)
2120 (83 ½”) +25 (1”)
613 (24 1⁄8”)+25 (1”)
635 (25)
128 (5) + 25 (1”)
693 (27 ¼”)
485 (19 1⁄8”)
1296 (50”)
195 (7 5⁄8”)
8 (3⁄8”)
8 (3⁄8”)
1016 (40”)
FP36: 1470 (57 7⁄8”)
FP30: 1320 (52”)
FP24: 1170 (46”)
FP36: 230 (9)
FP30: 195 (7 ¾”)
FP24: 160 (6 ¼”)
560 (22”)
75 (3”)
FP36: 899 (35 3⁄8”)
FP30: 749 (29 ½”)
FP24: 599 (23 5⁄8”)
10 (3⁄8”)58 (2 ¼”)
105°
635 (25”)
www.fhiaba.com · www.thevettagroup.com
Installation niche features: X-Pro Series
Flush
IMPORTANT
area to be left clear for the anti-tipping brackets
Niche Height
Niche Width
Door Swing Clearance
Door Opening Angle
Width
Height
Depth with door
7
1
4
1
2
3
Installation Guide
Series: All
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
The appliance is very heavy.
Take maximum care during handling to
avoid injury.
The appliance should always be transport-
ed in an erect position.
Avoid at all costs leaning it on its front side.
Preparing the installation
Transport to installation site
and unpacking
Since this is a large and heavy appliance, before transporting the ap-
pliance, check the access to the location where it will be installed
(door size, manoeuvring space in stairwells, etc.).
The appliance is attached to the base of the packaging (pallet) through
four bolts which can be removed using a 17 mm (3/4”) wrench.
It is recommended to use a manual transporting device to move the
appliance to the installation site, and only at this point to remove the
base of the packaging.
The appliance should always be transported in an erect position.
If this is not possible, transport the appliance laying on its rear side.
Once at the installation site, the appliance, which is equipped with four
wheels, can be taken off the pallet and positioned in the installation
area.
Operate as follows:
Take off the four bolts
1
securing the appliance to the pallet by
means of a 17 mm (3/4”) open spanner.
Remove the À xing brackets
3
and
4
.
To remove the front À xing bracket
3
, unscrew for one or two turns
the rear wheel adjusting bolt
2
by means of a 13 mm (1/2”) box span-
ner.
From the back of the unit and by means of a suitable, high duty hand
trolley, take off the appliance and place it on the Á oor.
Be very careful to avoid any damage to Á oors. Delicate Á oors should be
protected with plywood, hard cardboard or similar material panels.
8
FI24: 600 (23 ¾”)
FI30: 750 (29 5⁄8”)
FI36: 900 (35 ½”)
AAB
FI36
FI30
FI24
897 (35 1/4”)900 (35 1/2”)
750 (29 5/8”)
600 (23 3/4”)
747 (29 3/8”)
597 (23 1/2”)
900 (35 1/2”)
750 (29 5/8”)
600 (23 3/4”)
914 (36”
)
762
(30”)
610 (24”)
24: 610 (24)
30: 762 (30”)
36: 914 (36”)
36
30
24
www.fhiaba.com · www.thevettagroup.com
Series: All
Niche Dimensions and Installation Styles: Integrated Series
Niche Dimensions and Installation Styles: StandPlus and X-Pro Series
Panels WidthNiche
Series
A KCLITU: Lateral connection Kit
(not included - must be ordered as a
separate accessory)
B KCCITU: Central connection Kit
(not included - must be ordered as a
separate accessory)
MAXMIN
Series
NICHE
KCLXB: Lateral connection Kit
(not included - must be ordered as a
separate accessory)
Stand-Proud
25 (1”)
20 (
¾”
)
15 (
5⁄8”
)
10 (
3⁄8”
)
610 (24”)
A
B
6,5 (¼”)
A
B
6,5 (¼”)
10 (3⁄8”)
9
Installation Guide
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
A KCLITU: Lateral connection Kit
(not included - must be ordered as a
separate accessory)
B KCCITU: Central connection Kit
(not included - must be ordered as a
separate accessory)
A KCLITU: Lateral connection Kit
(not included - must be ordered as a
separate accessory)
B KCCITU: Central connection Kit
(not included - must be ordered as a
separate accessory)
Series: All
Installation types
KCLXB: Lateral connection Kit
(not included - must be ordered as a
separate accessory)
Niche 610 mm (24”)
Stand-Proud (for StandPlus and X-Pro series)
Flush installation with standard aluminum trims
Prominent installation with standard aluminum trims
EW
E W
EW
E W
E
W
E
W
10
Series: All
www.fhiaba.com · www.thevettagroup.com
The appliances are delivered from the factory for operation at 110V-
120V AC - 60Hz (US and Canada).
They are provided with a suitable supply cable and plug to be con-
nected to an appropriate 15A socket (US and Canada) provided
with an effective grounding.
A circuit breaker should also be installed and should be easily ac-
cessible so that it can be easily switched off before performing any
installation or maintenance.
To connect to the water supply system (for appliances equipped with
ice makers) a 1/4” waterline with accessible shut-off valve must be
supplied.
The appliance is provided with a water adapter elbow which is suit-
able for high water pressure and complies the Food Regulations.
The water À lter cartridge, which is provided with the appliance,
should be installed according to the accompanying instructions. Use
only the new adapter which is supplied with the appliance. The so-
lenoid connection on the appliance is 3/4” diameter but is metric
threaded. A standard garden hose threaded connector such as a
braided stainless hose found at typical hardware stores will strip or
damage the solenoid threads. Use only the supplied 1/4” quick con-
nect elbow adapter for connecting a 1/4” copper or polyethylene
source water line to the appliance.
Electrical cord length: 2500 mm (98 3/8”)
Water connection line length: 2500 mm (98 3/8”)
The appliance should be connected only to
a drinkable water supply system.
The Built-in Fhiaba À lter cannot make it safe
to drink any water which is not suitable for
human consumption.
Electrical and water supply behind the unit
Integrated Series StandPlus and X-Pro Series
Electrical and Water connection
Do not use extension cords or adapters.
Once the appliance is fully installed, con-
nected to the water supply (if applicable) and
operational, in the event that the water sup-
ply must be turned off,(touch the button
on
control panel to switch it off) before the main
water is shut off to prevent the appliance from
entering a ‘NO WATER IN’ alarm state.
11
Installation Guide
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Series: Integrated
Back of appliance
Water connection
Electrical connection
Operate as follows:
Unwind the electric cable and connect it directly to the wall socket.
Make sure the appliance is in the Stand-by condition and that all
lights are off; should it be not so press the Unit button to switch it off.
Push the 1/4” source waterline fully into the elbow connector then
thread the elbow adapter to the solenoid at the back of the appli-
ance.
Firmly tighten with À ngers - a tool / wrench should not be needed to
make a proper seal. Turn on the water and ensure all connections
are not leaking prior to pushing the unit into the niche.
2
1
12
www.fhiaba.com · www.thevettagroup.com
Series: StandPlus/X-Pro
Operate as follows:
Unwind the electric cable and connect it directly to the wall socket.
Make sure the appliance is in the Stand-by condition and that all ights
are off; should it be not so press the Unit button to switch it off.
Connect the water line to the threaded connection at the base of the
unit, as in À gure
1
.
Fit the other end of the hose to the water tap, use the gaskets provided
in the Owner’s Kit
2
.
Firmly tighten with À ngers - a tool / wrench should not be needed to
make a proper seal. Turn on the water and ensure all connections are
not leaking prior to pushing the unit into the niche.
Front of appliance
Back of appliance
Water connectionElectrical connection
13
1
2
1
2
Installation Guide
Series: All
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Adjust the appliance level by means of the front levelling feet
and the rear adjustable wheels.
Operate as follows:
After removing the bottom plinth or grille (it is kept in position by
magnets), adjust the height of the levelling feet
1
by means of a 17
mm (3/4”) open spanner.
Then adjust the height of the rear wheels by turning the front
adjusting bolts
2
clockwise or anticlockwise as it may be required.
Remount the bottom plinth or grille.
Levelling
14
1
2
3
www.fhiaba.com · www.thevettagroup.com
Series: Integrated
Decorative door and bottom-drawer panels layout
The dimensions of the panels are indicated in the table and draw-
ings on pages 16-19.
Nevertheless, according to the requirements for aligning with other
kitchen structures, the door panel can be higher than the upper
edge of the refrigerator door, and the drawer panel can be lower
than the edge of the drawer.
The panels must be mounted using special braces which attach
to adjustable devices provided on the door and drawer and with
brackets that anchor and adjust the panel’s vertical direction.
Braces, brackets and fixing screws are provided with the appliance
and must be applied to the panel as indicated.
Operate as follows:
To prepare the panels to be mounted on the appliance, follow
these steps, working on the back of the panel.
Door Panel
Trace, a line dividing the panel width in half
1
.
Starting form the Bottom edge of the panel, mark the positioning
of the brackets
2
.
Following the corresponding table, mark the external and then
the internal hole
3
.
15
7
8
4
5
Installation Guide
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Series: Integrated
Position the brackets on each set of marks to make sure they are
aligned
4
, then drill holes through the panel (pay close attention to
the panel’s thickness)
5
.
Screw the brackets in place
6
.
Drawer Panel
When preparing the Drawer Panel, follow the same instructions as
per the door panel, but make sure measurements are taken starting
from the top edge
7
. The support bracket faces the opposite way
8
(note imgs 4 and 8).
16
D E
D E
A
B C
F G
13 (½”)
13 (
½”)
34 (1
3⁄8”)
34 (1
3⁄8”)
1285 (50 5⁄8”)
1163 (45
¾”)
660 (26”)
157 (6
¼”)
min 1390 (54
¾”)max 635 (25”)
507.5 (20”)
382 (15
1⁄8”)
100 (4”)
A
897 (35 ¼”) 897 (35 ¼”) 747 (29 3⁄8”) 747 (29 3⁄8”) 597 (23 ½”)
355.5 (14”)
355.5 (14”)
279 (11”)
279 (11”)
205 (8
1⁄8”)
205 (8
1⁄8”)261 (10 ¼”)
261 (10 ¼”)
187 (7 3⁄8”)
187 (7
3⁄8”)
111 (4
3⁄8”)
111 (4
3⁄8”)
418 (16
½”)
418 (16
½”)
343 (13
½”)
343 (13
½”)
276.5 (10 7⁄8”)
276.5 (10 7⁄8”)386 (15 ¼”)
386 (15
¼”)
311 (12
¼”)
311 (12
¼”)
236.5 (9
3⁄8”)
236.5 (9 3⁄8”)
B
C
D
E
354.5 (14”) 354.5 (14”) 279.5 (11”) 279.5 (11”) 203.5(8”)
597 (23 ½”)
203.5(8”)F / G
www.fhiaba.com · www.thevettagroup.com
Series: Integrated
Decorative panels layout for Fridge with one Bottom-Drawer
Series 36
Hinge Left Hinge Left Hinge Left
Hinge Right Hinge Right Hinge Right
Series 30 Series 24
Holes positions
17
A
897 (35 ¼”) 897 (35 ¼”) 747 (29 3⁄8”) 747 (29 3⁄8”)
355.5 (14”)
355.5 (14”)
279 (11”)
279 (11”)
261 (10
¼”)
261 (10 ¼”)
187 (7 3⁄8”)
187 (7
3⁄8”)
418 (16
½”)
418 (16
½”)
343 (13
½”)
343 (13
½”)386 (15 ¼”)
386 (15
¼”)
311 (12
¼”)
311 (12
¼”)
B
C
D
E
354.5 (14”) 354.5 (14”) 279.5 (11”) 279.5 (11”)
F / G
D E
A
B C
F G
D E
min 1265 (49 ¾”)
1160 (45
5⁄8”)
1044 (41
1⁄8”)
600 (23
5⁄8”)
268 (10
½”)
292,5 (11
½”)
183 (7
¼”)
73 (2
7⁄8”)
66 (2
5⁄8”) 157 (6 ¼”)
337 (13
¼”)max 415 (16 3⁄8”)
13 (½”)
13 (
½”)
34 (1
3⁄8”)
Installation Guide
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Series: Integrated
Decorative panels layout for Fridge with two Bottom-Drawers
Holes positions
Series 36
Hinge Left Hinge Left
Hinge Right Hinge Right
Series 30
18
H I
D E
A
F G
1286 (50 5⁄8”)
1152,5 (45
3⁄8”)
650,5 (25
5⁄8”)
148,5 (5
7⁄8”)
6,5 (¼”)
6,5 (
¼”)
13 (
½”)
34 (1
3⁄8”)
34 (1
3⁄8”)
min 1390 (54 ¾”)
max 635 (25”)
507,5 (20”)
382 (15
1⁄8”)
100 (4”)
36: 627 (24 ¾”)
30: 477 (18
¾”)
24: 327 (12
7⁄8”)
1075 (42 3⁄8”)
<200 (7 7⁄8”)
115 (4
½”)
135 (5
3⁄8”)
135 (5
3⁄8”)
A
H
I
F / G
897 (35 ¼”) 897 (35 ¼”)
747 (29 3⁄8”) 747 (29 3⁄8”) 597 (23 ½”) 597 (23 ½”)
354.5 (14”) 354.5 (14”) 279.5 (11”) 279.5 (11”) 203,5(8”) 203,5(8”)
412 (16
¼”)
412 (16
¼”)
337 (13
¼”)
337 (13
¼”)
270.5 (10 5⁄8”)
270.5 (10
5⁄8”)380 (15”)
380 (15”)
305 (12”)
305 (12”)
230.5 (9
1⁄8”)
230.5 (9 1⁄8”)
418 (16
½”)
418 (16
½”)
343 (13
½”)
343 (13 ½”)
276.5 (10
7⁄8”)
276.5 (10 7⁄8”)386 (15 ¼”)
386 (15
¼”)
311 (12 ¼”)
311 (12 ¼”)
236.5 (9 3⁄8”)
236.5 (9
3⁄8”)
D
E
www.fhiaba.com · www.thevettagroup.com
Series: Integrated
Decorative panels layout for Fridge with glass door and one Bottom-Drawer
Holes positionsDoor window dimensions
Series 36
Hinge Left Hinge Left Hinge Left
Hinge Right Hinge Right Hinge Right
Series 30
Series 24
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74

Fhiaba FI36BI-LO Guide d'installation

Taper
Guide d'installation

dans d''autres langues