: PRINT FLIP INSTRUCTION MANUAL ENGLISH ONE SIDE - FRENCH THE OTHER SIDE AS
PER ILLUSTRATION BELOW.
APPLY SERIAL NUMBER LABEL FROM CARTON
Serial No.
XXXXXX000000
MODEL NO.
N415-0262 APR 27/12
2
www.napoleongrills.com
NAPOLEON warrants the following materials and workmanship in your new NAPOLEON
gas grill against defects for 10years. This covers aluminum casngs (excluding paint), side
shelves (excluding paint), stainless steel control panel (excluding screen prinng), stainless
steel burners, stainless steel or porcelain lid and base inserts, and lid handles, subject to
the following condions: During the rst ve years NAPOLEON will provide replacement
parts at our opon free of charge. From the sixth year to the tenth year, NAPOLEON will
provide replacement parts at 50% of the current retail price.
Components such as stainless steel or porcelain sear plates, stainless steel or cast iron
cooking grids, valves with ignion system, temperature gauges, knobs, and ceramic infra
red
burners (excluding screens) are covered and Napoleon will provide parts free of charge
during the rst two years of the limited warranty.
All other components including regulators, casters, warming racks, hoses and connectors,
I-GLOW™, fasteners and accessories are covered and NAPOLEON will provide parts free of
charge during the rst year of the limited warranty.
NAPOLEON shall not be liable for any transportaon charges, labor costs or export dues.
NAPOLEON products are designed with superior components and materials, and are assembled by trained crasmen who
take great pride in their work. The burner and valve assembly are leak tested and test-red at a quality test staon. This
grill has been thoroughly inspected by a qualied technician before packaging and shipping to ensure that you, the cus
tomer,
receive the quality product you expect from NAPOLEON.
We at Napoleon are dedicated to you, “our valued customer.” It is our goal to provide you with the necessary tools for an
unforgeable grilling experience. This manual is provided to assist you in assuring your new grill is assembled, installed,
maintained and cared for properly. It is important to read and understand this enre manual before operang your new
grill to ensure you fully understand all the safety precauons and features your grill has to oer. By carefully following
these instrucons, you will enjoy years of trouble-free grilling. If this product fails to meet your expectaons, for any rea
son,
please call our customer care department at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time) or visit our
Website at www.napoleongrills.com.
“NAPOLEON warrants its products against manufacturing defects to the original purchaser only, provided that the purchase was made through an autho
rized
NAPOLEON dealer and is subject to the following condions and limitaons:”
This factory warranty is non-transferable and may not be extended what-so-ever by any of our representaves.
The gas grill must be installed by a licensed, authorized service technician or contractor. Installaon must be done in accordance with the installaon
instrucons included with the product and all local and naonal building and re codes.
This limited warranty does not cover damages caused by misuse, lack of maintenance, grease res, hosle environments, accident, alteraons, abuse or
neglect and parts installed from other manufacturers will nullify this warranty.
This limited warranty further does not cover any scratches, dents, painted nishes, corrosion or discoloring by heat, abrasive and chemical cleaners, nor
chipping on porcelain enamel parts, nor any components used in the installaon of the gas grill.
Should deterioraon of parts occur to the degree of non-performance within the duraon of the warranted coverage, a replacement part will be provided.
In the rst year only, this warranty extends to the replacement of warranted parts, which are defecve in material or workmanship provided that the prod
uct
has been operated in accordance with the operaon instrucons and under normal condions.
Aer the rst year, with respect to this President’s Limited Lifeme Warranty NAPOLEON may, at its discreon, fully discharge all obligaons with respect to
this warranty by refunding to the original warranted purchaser the wholesale price of any warranted but defecve part(s).
NAPOLEON will not be responsible for the installaon, labor or any other costs or expenses related to the re-installaon of a warranted part, and such
expenses are not covered by this warranty.
Notwithstanding any provision contained in this President’s Limited Lifeme Warranty NAPOLEON’s responsibility under this warranty is dened as above
and it shall not in any event extend to any incidental, consequenal, or indirect damages.
This warranty denes the obligaon and liability of NAPOLEON with respect to the NAPOLEON gas grill and any other warranes expressed or implied with
respect to this product, its components or accessories are excluded.
NAPOLEON neither assumes, nor authorizes any third party to assume, on its behalf, any other liabilies with respect to the sale of this product.
NAPOLEON will not be responsible for: over ring, blow outs caused by environmental condions such as strong winds, or inadequate venlaon,
Any damages to the gas grill due to weather damage, hail, rough handling, damaging chemicals or cleaners will not be the responsibility of NAPOLEON.
The bill of sale or copy will be required together with a serial number and a model number when making any warranty claims from NAPOLEON.
NAPOLEON reserves the right to have its representave inspect any product or part prior to honoring any warranty claim.
NAPOLEON shall not be liable for any transportaon charges, labor costs, or export dues.
3
www.napoleongrills.com
• This gas grill must be assembled exactly according to the instrucons in the manual. If the grill was store
assembled, you must review the assembly instrucons to conrm correct assembly and perform the
required leak tests before operang the grill.
• Read the enre instrucon manual before operang the gas grill.
• Under no circumstance should this gas grill be modied.
• Follow lighng instrucons carefully when operang grill.
• Gas must be turned o at the propane cylinder or at the natural gas supply valve when the gas grill is not in use.
• Keep children and pets away from hot grill, DO NOT allow children to climb inside cabinet.
• Do not leave the grill unaended while in use.
• Do not move grill when hot or operang.
• This gas grill must not be installed in or on recreaonal vehicles and/or boats.
• This gas grill must only be stored outdoors in a well-venlated area and must not be used inside a building,
garage, screened -in porch or any other enclosed area.
• Maintain proper clearance to combusbles (16” (410mm) to rear of unit 7” (178mm) to sides). Addional
clearance 24” (610mm) is recommended near vinyl siding or panes of glass.
• At all mes keep the venlaon openings of the cylinder enclosure free and clear from debris.
• Do not operate unit under any combusble construcon.
• Do not locate in windy sengs. High winds adversely aect the cooking performance of the gas grill.
• When the gas grill is stored indoors, the propane cylinder must be disconnected from the grill and stored
outdoors in a well-venlated area, disconnected cylinders must not be stored in a building, garage or other
enclosed area. Natural gas units must be disconnected from the supply when being stored indoors.
• Inspect the gas line hose before each use. If there is evidence of excessive abrasion or wear, it must be
replaced before using the gas grill, with a replacement hose assembly specied by the grill manufacturer.
• Never store a spare LP gas cylinder under or near this grill.
• Never ll the cylinder beyond 80 % full.
• Do not aempt to use a cylinder, which is not equipped with a QCC1 type connecon.
• Leak test all connecons before inial use, even if the grill was purchased fully assembled, annually or
whenever any gas component has been replaced.
• Never use natural gas in a unit designed for liquid propane gas.
• Never use lighter uid in a gas grill.
• Use charcoal briquees only with a Napoleon charcoal tray designed for this unit.
• Burner controls must be o when turning supply cylinder on.
• Do not light burners with lid closed.
• Do not operate rear burner with main burners operang.
• The lid is to be closed during the preheat period.
• Do not route hose underneath drip pan-proper hose clearance to boom of unit must be maintained.
• Clean grease tray and sear plates regularly to avoid build-up, which may lead to grease res.
• Remove warming rack before lighng rear burner. The extreme heat will damage the warming rack.
• Ensure sear plates are posioned properly according to sear plate installaon instrucons.
• Do not use side shelves to store lighters, matches or any other combusbles.
• Keep gas line away from heated surfaces
• Keep any electrical supply cord away from water or heated surfaces.
• Inspect infrared burner venturi tube for spider webs and other obstrucons periodically. Clean the tubes
completely if you nd any such obstrucons.
• The outdoor cooking gas grill and its individual shuto valve must be disconnected from the gas supply
piping system during any pressure tesng of that system at test pressures in excess of 0.5psi (3.5kPa).
• The outdoor cooking gas grill must be isolated from the gas supply piping system by closing its individual
manual shuto valve during any pressure tesng of the gas supply piping system at test pressures equal to
or less than 1/2 psi (3.5 kPa).
4
www.napoleongrills.com
This gas barbecue is cered under Canadian and American Naonal Standards, CSA 1.6-2008 and ANSI
Z21.58a -2008 respecvely for outdoor gas grills and should be installed to conform with local codes. In
absence of local codes, install to the current CAN/CSA-B149.1 Propane Installaon Code in Canada or to the
Naonal Fuel Gas Code, ANSI Z223.1 in the United States.
When installed, the unit must be electrically grounded in accordance with local codes or, in absence of local
codes, with the current CSA C22.1 Canadian electrical code in Canada or the Naonal Electrical Code,
ANSI/
NFPA 70 in the United States.
If a rosserie motor is used, it must be electrically grounded in accordance with local codes or, in absence of
local codes, with the current CSA C22.1 Canadian electrical code in Canada or the Naonal Electrical Code,
ANSI/NFPA 70 in the United States.
: The burning of gas fuel creates by-products, some of which are on the list as
substances known by the State of California to cause cancer or reproducve harm. When cooking with gas,
always ensure adequate venlaon to the unit, to minimize exposure to such substances.
Propane Cylinder Specicaons
A dented or rusty cylinder may be hazardous and should be checked by your propane supplier. Never use a
cyl
inder with a damaged valve. Use only a propane supply cylinder constructed and marked in accordance
with the specicaons for LP-gas cylinders of the Naonal Standard of Canada, CAN/CSA-b339, Cylinders,
Spheres and Tubes for Transportaon of Dangerous Goods; and Commission, as applicable or the Specica
ons
for LP-Gas Cylinders of the U.S. Department of Transportaon (D.O.T.). This appliance has been designed for
use with a 20 lb. (9.1 kg) size propane cylinder only (not supplied).
The propane cylinder must be provided with a cylinder connecon device compable with the connecon
for outdoor cooking appliances. The propane cylinder must be provided with a shut-o valve terminang in
a propane cylinder valve type QCC1, and a safety relief device having direct communicaon with the vapor
space of the cylinder. The cylinder supply system must be arranged for vapor withdrawal and the cylinder shall
include a collar to protect the cylinder valve. The cylinder shall incorporate a listed OPD (overll protecon
device). Do not store a spare LP-gas cylinder under or near this appliance. Never ll the cylinder beyond 80
percent full.
Propane Cylinder Installaon
Ensure that the gas regulator hose is kink free. Remove the cap or plug from the cylinder
fuel valve. Insert the black QCC1 regulator nipple onto the QCC1 fuel valve. Hand ghten clockwise. Do not use
tools. Leak test all joints prior to using the barbecue. A leak test must be performed annually, and each me a
cylinder is hooked up, or if a part of the gas system is replaced.
• Check that the cylinder valve is closed by turning the knob clockwise.
• Check that the grill’s burner knobs are in the o posion.
• Open cabinet doors.
• Place the cylinder into the tank holder in boom of shelf.
• Posion the cylinder so that the valve faces toward the front of the unit.
• Aach regulator hose.
The regulator supplies a pressure of 11 inches. water column to the gas grill and has a QCC1 type ng. Cyl
inders
to be used with this unit must be supplied with a QCC1 cylinder valve. A QCC1 cylinder has a posive seat
ing
connecon, which will not allow gas ow unl a posive seal has been achieved. It is also equipped with an
excess ow device. In order to aain full ow to the grill, the valves must be in the o posion when the cylin
der
valve is turned on.
5
www.napoleongrills.com
Natural Gas Hook-Up
This natural gas grill is supplied with a 10 supply hose (complete with a quick disconnect) designed for natural
gas and cered for outdoor use. The gas grill is designed to operate at an inlet pressure of 7 inches water
column. Piping and valves upstream of the quick disconnect are not supplied. The installaon must com
ply
with CAN B149.1 Natural Gas and Propane installaon code in Canada, or to the Naonal Fuel Gas Code,
ANSI Z223.1 in the United States. The gas supply pipe must be suciently sized to supply the BTU/h specied
on the rang plate, based on the length of the piping run. The quick disconnect must not be installed in an
upward direcon and a readily accessible manual shut-o valve must be installed upstream of, and as close to,
the quick disconnect as is feasible. The ared end of the hose must be connected to the ng on the end of
the ex tube as illustrated in the Natural Gas Hose Aachment diagram. Tighten using two wrenches. (Do not
use thread sealer/pipe dope.) These connecons must be made by a licensed gas installer. Leak test all joints
prior to using the gas grill.
• Do not route hose underneath drip pan.
• Do not route hose between space in boom shelf and back panel.
• Do not route hose over top of back panel.
• Ensure all hose connecons are ghtened using two wrenches. Do not use teon tape or pipe dope on
any hose connecon.
• Ensure the hose does not contact any high temperature surfaces, or it may melt and leak causing a re.
• Do not use enclosure to store excess hose, as there is a greater chance of the hose contacng a hot
surface, it may melt and leak causing a re.
• Leak test all the connecons using a soap and water soluon, as per the leak tesng instrucons found in
the this manual.
: This must be done before inial use, annually, and whenever any gas components are replaced
or serviced. Do not smoke while performing this test, and remove all sources of ignion. See Leak Tesng
Dia
gram for areas to check. Turn all burner controls to the o posion. Turn gas supply valve on.
Brush a half-and-half soluon of liquid soap and water onto all joints and connecons of the regulator, hose,
manifolds and valves.
Bubbles will indicate a gas leak. Either ghten the loose joint or have the part replaced with one recommend
ed
by the Napoleon Customer Care department and have the grill inspected by a cered gas installer.
If the leak cannot be stopped, immediately shut o the gas supply, disconnect it, and have the grill inspected
by a cered gas installer or dealer. Do not use the grill unl the leak has been corrected.
6
www.napoleongrills.com
1. Open grill lid. 1. Open grill lid. 1. Open/Remove side burner cover.
2. Push and turn any main burner knob
slowly to the ’hi’ posion. This acon
will ignite the pilot ame which will in
turn light the selected burner. If the pilot
lights, connue to push down on the
control knob unl the burner lights and
then release.
2. Remove the warming rack 2. Push and turn side burner control to
high posion.
3. If the pilot does not ignite, then
immediately turn the control knob back
to the ‘o posion and repeat step 2
several mes.
3. Clip a match into the supplied lighng
rod. Hold a lit match to right end ports of
rear burner. Turn rear burner to high.
3. Press and hold igniter buon unl
burner lights, or light by match
4. If the pilot and burner will not ignite
within 5 seconds, turn the control knob to
the ‘o’ posion and wait 5 minutes for
any excess gas to dissipate. Either repeat
steps 2 and 3 or light with a match.
4. If the burner will not ignite within 5
seconds, turn the control knob to the
‘o’ posion and wait 5 minutes for any
excess gas to dissipate. Either repeat
steps 2 and 3 or light with a match.
5. If lighng the unit with a match, clip
the match into the supplied lighng
rod. Hold the lit match down through
the grill and sear plate while turning the
corresponding burner valve to high.
7
www.napoleongrills.com
: When lit for the rst me, the gas grill emits a slight odor. This is a normal temporary condion
caused by the “burn-in” of internal paints and lubricants used in the manufacturing process and does not occur
again. Simply run the main burners on high for approximately one-half hour.
: When searing foods, we recommend preheang the grill by operang all main burners
in the high posion with the lid closed for approximately 10 minutes. Food cooked for short periods of me
(sh, vegetables) can be grilled with the lid open. Cooking with the lid closed will ensure higher, more even
temperatures that can reduce cooking me and cook meat more evenly. Food that has a cooking me longer
than 30 minutes, such as roasts, can be cooked indirectly (with the burner lit opposite to the food placement).
When cooking very lean meats, such as chicken breasts or lean pork, the grids can be oiled before pre-heang
to reduce scking. Cooking meat with a high degree of fat content can create are-ups. Either trim the fat or
reduce temperatures to inhibit this. Should a are-up occur, move food away from the ames and reduce the
heat. Leave the lid open. See Your All Season Grill cookbook by Napoleon for more detailed instrucons.
: Place food to be cooked on the grill directly over the heat. This method is generally used for
searing or for foods that do not require prolonged cooking mes such as hamburgers, steaks, chicken pieces,
or vegetables. The food is rst seared to trap-in the juices and avor, and then the temperature is lowered to
nish cooking the food to your preference.
: With one or more burners operang, place food to be cooked on the grill over a burner that
is not operang. The heat circulates around the food, cooking slowly and evenly. Cooking with this method is
much the same as cooking in your oven and is generally used for larger cuts of meats such as roasts, chickens
or turkeys, but can also be used for cooking foods that are prone to are-ups or for smoking foods. Lower
tem
peratures and slower cooking mes result in tender foods.
: Remove the warming rack prior to use, the extreme heat will damage the
warming rack. Cooking grids should also be removed if they interfere with the rosserie. The rear burner is
designed to be used in conjuncon with the rosserie kit (included with most rear burner units) available from
your dealer. See the rosserie kit assembly instrucons.
To use the counterbalance - remove the rosserie motor from the gas grill. Place the spit with meat being
cooked across the hangers inside the grill. The meat will naturally hang with the heavy side down. Tighten
the counterbalance arm and weight so the arm is facing up. Slide the counterweight in or out to balance the
load and ghten in place. Re-install the motor and begin cooking. Place a metal dish underneath the meat to
collect drippings for basng and naturally delicious gravy. Basng liquid may be added as required. To seal in
juices, rst operate rear burner on high unl brown, then reduce the heat to thoroughly cook foods. Keep the
lid closed for best results. Your roasts and fowl will brown perfectly on the outside and stay moist and tender
on the inside. For example, a 3 pound chicken on the rosserie will be done in approximately 1½ hours on
medium to high. See ‘Your all Season Grill’ cookbook by Napoleon for more detailed instrucons.
8
www.napoleongrills.com
: Stainless steel tends to oxidize or stain in the presence of chlorides and suldes, parcularly in coastal
areas and other harsh environments, such as the warm, highly humid atmosphere around pools and hot tubs.
These stains could be perceived as rust, but can be easily removed or prevented. To provide stain prevenon
and removal, wash all stainless steel surfaces every 3-4 weeks or as oen as required with fresh water and/or
stainless steel cleaner.
We recommend this gas grill be thoroughly inspected and serviced annually by a qualied service person.
At all mes keep the gas grill area free from combusble materials, gasoline and other ammable vapors and
liquids. Do not obstruct the ow of venlaon and combuson air. Keep the cylinder enclosure venlaon
openings (located on the cart sides and at the front and back of the boom shelf) free and clear from debris.
: (This must be done by a qualied gas installer.) The air shuer is factory set and
should not need adjusng under normal condions. Under extreme eld condions, adjustments might be
required. When the air shuer is adjusted correctly the ames will be dark blue, pped with light blue and
occasionally yellow.
• With too lile air ow to the burner, the ames are lazy yellow and can produce soot.
• With too much air ow, the ames li erracally and can cause dicules when lighng.
Adjusng the air shuer:
1. Remove cooking grids and sear plates and leave lid open.
2. Loosen air-shuer lock screw located at the mouth of the burner and open or close air shuer as required.
The normal opening sengs are:
Main Tube Burner Propane 5/32” (4mm)
Natural 5/32” (4mm)
*Infra-Red burners have no air adjustment.
3. Light the burners and set to high. Visually inspect burner ames. When the shuers are set correctly, turn
burners o, ghten locking screws, and replace removed parts. Ensure that the insect screens are installed.
Light Blue
Yellow Tipping
Dark Blue
Burner
Burner Port
Approximately
1/2” (13mm)
9
www.napoleongrills.com
: The burners are made from heavy wall 304 stainless steel, but extreme heat and a corrosive
envi
ronment can cause surface corrosion to occur. This can be removed with a brass wire brush.
Spiders and insects are aracted to the smell of propane and natural gas. The burner is equipped with an
in
sect screen on the air shuer, which reduces the likelihood of insects building nests inside the burner but
does not enrely eliminate the problem. A nest or web can cause the burner to burn with a so yellow or
orange ame or cause a re (ashback) at the air shuer beneath the control panel.
Remove the screw that aaches the burner to the back wall.
Slide the burner back and upwards to remove. Cleaning: Use a exible venturi tube brush to clean the inside
: The control panel text is printed directly on the stainless steel and with proper maintenance
will remain dark and legible. To clean the panel, use only warm soapy water or stainless steel cleaner available
from your Napoleon dealer. Never apply abrasive cleaners on any stainless surfaces, especially the printed
poron of the control panel or the prinng will gradually rub o.
: Remove the cooking grids. Use a brass wire brush to clean loose debris from
the casng sides and underneath the lid. Scrape the sear plates with a puy knife or scraper, and use a wire
brush to remove the ash. Remove the sear plates and brush debris from the burners with the brass wire brush.
Sweep all debris from inside the gas grill into the drip pan.
: Accumulated grease is a re hazard. Clean the drip pan frequently (every 4 – 5 uses or as oen as
re
quired) to avoid grease buildup. Grease and excess drippings pass through to the drip pan, located beneath
the gas grill and accumulate in the disposable grease tray below the drip pan. To access the disposable grease
tray or to clean the drip pan, slide the drip pan free of the grill. Never line the drip pan with aluminum foil,
sand or any other material as this could prevent the grease from owing properly. The pan should be scraped
out with a puy knife or scraper. Replace the disposable grease tray every 2 – 4 weeks, depending on gas grill
usage. For supplies, see your Napoleon Gas Grill dealer.
Do not use abrasive cleaners or steel wool on any painted, porcelain or stain
less
steel parts of your Napoleon Grill. Doing so will scratch the nish. Exterior grill surfaces should be cleaned with
warm soapy water while the metal is sll warm to the touch. To clean stainless surfaces, use a stainless steel or
a non-abrasive cleaner. Always wipe in the direcon of the grain. Over me, stainless steel parts discolor when
heated, usually to a golden or brown hue. This discoloraon is normal and does not aect the performance of
the grill. Porcelain enamel components must be handled with addional care. The baked-on enamel nish is
glass-like, and will chip if struck. Touch-up enamel is available from your Napoleon Grill dealer.
: The grids and warming rack are best cleaned with a brass wire brush during the
pre-heang period. Steel wool can be used for stubborn stains. It is normal that stainless grids (if equipped) will
discolor permanently from regular usage due to the high temperature of the cooking surface.
: The cast iron cooking grids supplied with your new grill oer superior heat retenon
and distribuon. By regularly seasoning your grids you are adding a protecve coang, which will aid in resisng
corrosion and increase your grids non-sck capabilies.
: Wash the cooking grids by hand with mild dish soap and water to remove any residue from
the manufacturing process (never wash in a dish washer). Rinse thoroughly with hot water and dry completely
with a so cloth. This is important to avoid moisture from entering the cast iron.
: Using a so cloth, spread VEGETABLE SHORTENING over the enre grid surface ensuring all grooves
and corners are covered. Do not use salted fats such as buer or margarine. Pre-heat your grill for 15 min
utes,
then place the seasoned cooking grids in the grill. Turn the burner control knobs to medium with the lid
closed. Allow the cooking grids to heat for approximately one-half hour. Turn all the burners to the “OFF”
posion and turn the gas o at the source. Let the cooking grids stand unl cool. This procedure should be
repeated several mes throughout the season, although it is not required for daily use (follow daily usage
procedure below).
: Before pre-heang, and cleaning with a brass wire grill brush, coat the enre top surface of the
cooking grids with VEGETABLE SHORTENING. Pre-heat the grill and then brush away any unwanted residue
with a brass wire brush.
: (upgrade kit available - see replacement parts list). Stainless steel cooking grids
are durable and corrosion resistant. They require less seasoning and maintenance than cast iron cooking grids.
It is recommended that you follow the daily usage procedure listed above although you may nd pre-heang
and cleaning your grids with a wire brush is sucient for your grilling needs.
10
www.napoleongrills.com
of the burner. Shake any loose debris from the burner through the gas inlet. Check the burner ports and valve
orices for blockages. Burner ports can close over me due to cooking debris and corrosion, use an opened pa
perclip
or the supplied port maintenance bit to clean them. Drill out blocked ports using this drill bit in a small cord
less
drill. The ports are easier to clean if the burner is removed from the grill, but it can also be done with the
burner installed. Do not ex the drill bit when drilling the ports, as this will cause the drill bit to break. This drill
is for burner ports only, not for the brass orices (jets) which regulate the ow into the burner. Take care not to
enlarge the holes. Ensure the insect screen is clean, ght, and free of any lint or other debris.
Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
installing.
Problem Possible Causes Soluon
Low heat / Low ame
when valve turned to
high.
For propane - improper lighng procedure.
For natural gas - undersized supply line.
For both gases - improper preheang.
Ensure lighng procedure is followed
carefully. All gas grill valves must be in the
o posion when the tank valve is turned
on. Turn tank on slowly to allow pressure
to equalize. See lighng instrucons.
Pipe must be sized according to
installaon code.
Preheat grill with both main burners on
high for 10 to 15 minutes.
Excessive are-ups/
uneven heat.
Sear plates installed incorrectly.
Improper preheang.
Excessive grease and ash build on sear plates
and in drip pan.
Ensure sear plates are installed with the
holes towards the front and the slots on
the boom. See assembly instrucons.
Preheat grill with both main burners on
high for 10 to 15 minutes.
Clean sear plates and drip pan regularly.
Do not line pan with aluminum foil. Refer
to cleaning instrucons.
Burners burn with yellow
ame, accompanied by
the smell of gas.
Possible spider web or other debris, or
improper air shuer adjustment.
Thoroughly clean burner by removing.
See general maintenance instrucons.
Open air shuer slightly according to
combuson air adjustment instrucons.
(This must be done by a qualied gas
installer.)
: Clean casngs periodically with warm soapy water. Aluminum will not rust, but high
temperatures and weathering can cause oxidaon to occur on aluminum surfaces. This appears as white spots
on the casngs. To renish these areas, clean rst and sand lightly with ne sandpaper. Wipe the surface to
remove any residue and paint with high temperature barbecue paint. Protect surrounding areas from over-
spray.
Follow the manufacture’s direcons for curing.
11
www.napoleongrills.com
Flames li away from
burner, accompanied
by the smell of gas, and
possibly dicules in
lighng.
Improper air shuer adjustment. Close air shuer slightly according to
combuson air adjustment instrucons.
(This must be done by a qualied gas
installer.)
Humming regulator. Normal occurrence on hot days. This is not a defect. It is caused by internal
vibraons in the regulator and does not
aect the performance or safety of the
gas grill. Humming regulators will not be
replaced.
Burners will not cross
light each other.
Plugged ports at back of burner. Clean burner ports. See burner
maintenance instrucons.
“Paint” appears to be
peeling inside lid or hood.
Grease build-up on inside surfaces. This is not a defect. The nish on the lid
and hood is porcelain, and will not peel.
The peeling is caused by hardened grease,
which dries into paint-like shards, that
ake o. Regular cleaning will prevent this.
See cleaning instrucons.
Infrared burner (if
equipped) ashes back
(during operaon the
burner abruptly makes
a loud “whoosh” sound,
followed by a connuous
blow-torch type sound
and grows dim.)
Ceramic les overloaded with grease drippings
and build-up. Ports are clogged.
Burner overheated due to inadequate
venlaon (too much grill surface covered by
griddle or pan.)
Cracked ceramic le.
Leaking gasket surrounding the ceramic le, or
a weld failure in the burner housing.
Turn burner o and allow to cool for at
least two minutes. Relight burner and
burn on high for at least ve minutes or
unl the ceramic les are evenly glowing
red.
Ensure that no more than 75% of the
grill surface is covered by objects or
accessories. Turn burner o and allow to
cool for at least two minutes, then relight.
Allow burner to cool and inspect very
closely for cracks. If any cracks are found,
contact your authorized Napoleon dealer
to order a replacement burner assembly.
Contact your authorized Napoleon dealer
for instrucons on ordering a replacement
burner assembly.
12
www.napoleongrills.com
Warranty Informaon
MODEL:
DATE OF PURCHASE:
SERIAL NUMBER:
(Record informaon here for easy reference)
Before contacng the Customer Care Department, check the NAC Website for more extensive cleaning,
main
tenance, troubleshoong and parts replacement instrucons at www.napoleongrills.com. Contact
the factory directly for replacement parts and warranty claims. Our Customer Care Department is available
between 9 AM and 5 PM (Eastern Standard Time) at 1-866-820-8686 or fax at 1-705-727-4282. To process a
claim, we must be provided with the following informaon:
1. Model and serial number of the unit.
2. Part number and descripon.
3. A concise descripon of the problem (‘broken’ is not sucient).
4. Proof of purchase (photocopy of the invoice).
In some cases the Customer Care Representave could request to have the parts returned to the factory for
inspecon before providing replacement parts. These parts must be shipped prepaid to the aenon of the
Customer Care Department with the following informaon enclosed:
1. Model and serial number of the unit.
2. A concise descripon of the problem (‘broken’ is not sucient).
3. Proof of purchase (photocopy of the invoice).
4. Return Authorizaon Number - provided by the Customer Care Representave.
Before contacng customer care, please note that the following items are not covered by the warranty:
• Costs for transportaon, brokerage or export dues.
• Labor costs for removal and reinstallaon.
• Costs for service calls to diagnose problems.
• Discoloraon of stainless steel parts.
• Part failure due to lack of cleaning and maintenance, or use of improper cleaners (oven cleaner).
13
www.napoleongrills.com
Geng Started
1. Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any components
packed inside. Use the parts list to ensure all necessary parts are included.
2. Do not destroy packaging unl the grill has been fully assembled and operates to your sasfacon.
3. Assemble the grill where it is to be used, lay down cardboard or a towel to protect parts from being lost or
damaged while assembling.
4. Most stainless steel parts are supplied with a protecve plasc coang that must be removed prior to
using grill.
5. Follow all instrucons in the order that they are laid out in this manual.
6. Two people are required to li the grill head onto the assembled cart.
Flat and Philips
screwdrivers
Pliers
3/8 (10mm)
Wrench,
ratchet or driver
Hammer
TOOLS REQUIRED FOR ASSEMBLY (tools not included)
14
www.napoleongrills.com
Aach (4) casters, using (4) ¼ -20 x 3/8” screws and (4) ¼ -20 lock nuts for each caster. Aach brackets under front casters
as illustrated. Tighten securely.
Snap magnet into slot in front of boom shelf.
1 x N430-0002
16 x N570-0073 (1/4-20 X 3/8”)
3/8”(10mm)
7/16”(11mm)
16 x N450-0027 (1/4-20)
Insert propane tank ring into slots in boom of shelf as shown. Fold tabs over to secure in place.
Install end cart panels ensuring slots in panel are to the top, rest panel on boom shelf and line up holes. Fasten using
(4) #14 x 1/2” screws.
15
www.napoleongrills.com
4 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
Insert propane tank ring into slots in boom of shelf as shown. Fold tabs over to secure in place.
Install end cart panels ensuring slots in panel are to the top, rest panel on boom shelf and line up holes. Fasten using
(4) #14 x 1/2” screws.
16
www.napoleongrills.com
6 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
Fit rear cart panel between the two end panels; ensure large hole in panel is to the boom right corner as illustrated. Fasten
using (6) #14 x 1/2” screws, three on each side.
Insert tank inhibitor bracket into slot in rear panel as illustrated. Fasten to boom panel using (1) #14 x 1/2” screw. Clip top
propane tank mount into slots in back panel. Insert one end at a me, gently bending wire. (When not in use tank mount
will lay at against back panel).
17
www.napoleongrills.com
Insert tank inhibitor bracket into slot in rear panel as illustrated. Fasten to boom panel using (1) #14 x 1/2” screw. Clip top
propane tank mount into slots in back panel. Insert one end at a me, gently bending wire. (When not in use tank mount
will lay at against back panel).
1 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
18
www.napoleongrills.com
4 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
4 x N570-0080 (#14 x 1/2”)
1 x N430-0002
Fasten top rail assembly to the front of side panels using (4) #14 x 1/2” screws. For ease of installaon start all screws
be
fore ghtening completely. Snap magnet into place as shown.
3/8”(10mm)
Aach heat shield using (4) #14 x 1/2» screws. Aach one end under lip of back panel and other end to underside of front
cabinet support.
19
www.napoleongrills.com
4 x N570-0091 (1/4-20 x 1/2”)
3/8”(10mm)
PROPANE ONLY – To avoid assembly dicules, prior to mounng the grill head, remove zip e holding regulator up under
control panel. This was installed at the factory to protect the regulator hose during shipping and is no longer required.
(Take care when removing the e not to damage the hose). Ensure the regulator drops into the small opening, between the
tank heat shield and the right side of the cabinet.
Li grill head and place on assembled cart, lining up holes in top of side cart panels with holes in boom of base. Fasten
from inside using (4) 1/4-20 x 1/2” screws, two per side.
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
NAPOLEON LA 300RB Le manuel du propriétaire
- Catégorie
- Barbecues
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: NAPOLEON LA 300RB Owner's manual