Samsung HW-T40M Manuel utilisateur

HW-T400

FULL MANUAL

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at www.samsung.com/register

ENG - 2

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Refer to the table below for an explanation of

symbols which may be on your Samsung product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that high voltage

is present inside. It is dangerous to

make any kind of contact with any

internal part of this product.

This symbol indicates that this product

has included important literature

concerning operation and maintenance.

Class II product : This symbol indicates

that it does not require a safety

connection to electrical earth (ground).

If this symbol is not present on a

product with a power cord, the product

MUST have a reliable connection to

protective earth (ground).

AC voltage : This symbol indicates that

the rated voltage marked with the

symbol is AC voltage.

DC voltage : This symbol indicates that

the rated voltage marked with the

symbol is DC voltage.

Caution, Consult instructions for use :

This symbol instructs the user to

consult the user manual for further

safety related information.

WARNING

• To reduce the risk of re or electric shock, do

not expose this appliance to rain or moisture.

• To prevent injury, this apparatus must be

securely attached to the oor/wall in

accordance with the installation instructions.

CAUTION

• Do not expose this apparatus to dripping or

splashing. Do not put objects lled with

liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you

must pull the power plug out of the wall

socket. Consequently, the power plug must

be easily and readily accessible at all times.

CAUTION (for Canada)

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference,

including interference that may cause undesired

operation of the device.

This device and its antenna(s) must not be co-

located or operation in conjunction with any other

antenna or transmitter.

This device may automatically discontinue

transmission if there is no information to

transmit, or an operational failure. Note that this

is not intended to prohibit the transmission of

control or signaling information or the use of

repetitive codes where required by the

technology.

This Class B digital apparatus complies with

Canadian ICES-003.

ENG - 3

Radiation Exposure Statement

This equipment complies with IC RSS-102

radiation exposure limits set forth for an

uncontrolled environment. This equipment should

be installed and operated with minimum distance

20 cm between the radiator & your body.

Important Safety Instructions

Read these operating instructions carefully

before using the unit. Follow all the safety

instructions listed below. Keep these operating

instructions handy for future reference.

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including ampliers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug.

A polarized plug has two blades with one

wider than the other. A grounding type plug

has two blades and a third grounding prong.

The wide blade or the third prong are

provided for your safety. If the provided plug

does not t into your outlet, consult an

electrician for replacement of the obsolete

outlet.

10. Protect the power cord from being walked

on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specied

by the manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table

specied by the manufacturer,

or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods of

time.

14. Refer all servicing to qualied service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

ENG - 4

PRECAUTIONS

1. Ensure that the AC power supply in your

house complies with the power

requirements listed on the identication

sticker located on the bottom of your

product. Install your product horizontally, on

a suitable base (furniture), with enough

space around it for ventilation (3~4 inches).

Make sure the ventilation slots are not

covered. Do not place the unit on ampliers

or other equipment which may become hot.

This unit is designed for continuous use.

To fully turn off the unit, disconnect the AC

plug from the wall outlet. Unplug the unit if

you intend to leave it unused for a long

period of time.

2. During thunderstorms, disconnect the AC

plug from the wall outlet. Voltage peaks due

to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or

other heat sources. This could lead to

overheating and cause the unit to

malfunction.

4. Protect the product from moisture (i.e.

vases), and excess heat (e.g. a replace) or

equipment creating strong magnetic or

electric elds. Unplug the power cable from

the AC wall socket if the unit malfunctions.

Your product is not intended for industrial

use. It is for personal use only. Condensation

may occur if your product has been stored in

cold temperatures. If transporting the unit

during the winter, wait approximately

2 hours until the unit has reached room

temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the

environment. Do not dispose of the battery

in the general household trash. Do not

expose the battery to excess heat, direct

sunlight, or re. Do not short circuit,

disassemble, or overheat the battery.

Danger of explosion if the battery is replaced

incorrectly. Replace only with the same or

equivalent type.

ENG - 5

ABOUT THIS MANUAL

The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can

download.

USER MANUAL

See this manual for safety instructions, product installation,

components, connections, and product specications.

FULL MANUAL

You can access the FULL MANUAL on Samsung’s on-line

customer support center by scanning the QR code on the left.

To see the manual on your PC or mobile device, download the

manual in document format from Samsung’s website.

(http://www.samsung.com/support)

Design and specications are subject to change without prior notice.

ENG - 6

CONTENTS

01 Checking the Components 8

Inserting battery (AAA) into the Remote Control ------------------------- 8

02 Product Overview 9

Front / Right Side Panel of the Soundbar ------------------------- 9

Bottom Panel of the Soundbar ------------------------- 10

03 The Remote Control 11

Using the Hidden Buttons (Buttons with more than one function)

-------------------------

12

Adjusting the Soundbar volume with a TV remote control

-------------------------

14

04 Connecting the Soundbar 15

Connecting Electrical Power

-------------------------

15

05 Connecting to a TV 16

Connecting using an Optical Cable

-------------------------

16

Connecting a TV or Bluetooth Device via Bluetooth

-------------------------

18

Connecting a Soundbar to a mobile device via NFC function

-------------------------

19

06 Connecting an External Device 22

Connecting using an Optical Cable

-------------------------

22

Connecting using an Analog Audio (AUX) Cable

-------------------------

23

07 Connecting a USB Storage Device 24

Setting Repeat Play Options

-------------------------

25

ENG - 7

08 System Initialize 27

09 Installing the Wall Mount (Optional) 28

Installation Precautions

-------------------------

28

Wall mount Components

-------------------------

28

10 Software Update 31

Update Procedure

-------------------------

31

When update fails

-------------------------

32

11 Troubleshooting 33

12 License 34

13 Open Source License Notice 34

14 Important Notes About Service 34

15 SpecicationsandGuide 35

Specications

-------------------------

35

ENG - 8

01 CHECKING THE COMPONENTS

Soundbar Main Unit Power Cord Remote Control /

Battery (AAA x 1)

• User Manual / Warranty Card / Regulatory Guide (Not available in some locations).

• For more information about the power supply and power consumption, refer to the label attached

to the product. (Label : Bottom of the Soundbar Main Unit)

• To purchase additional components or optional cables, contact a Samsung Service Center or

Samsung Customer Care.

• The appearance of the accessories may differ slightly from the illustrations above.

Inserting battery (AAA) into the Remote Control

Match the polarity of the battery to the symbols on the battery compartment.

1

3

2

ENG - 9

02 PRODUCT OVERVIEW

Front / Right Side Panel of the Soundbar

AUX IN

POWER

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

POWER

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

Volume

Power

Position the product so

that the SAMSUNG

logo is located on the

top.

Right Side of the Soundbar

󰟳

󰟵

NFC

󰟴

󰟳

LED

indicator

The LED Indicator ashes, glows, or changes color depending on the Soundbar's current

mode or status. The color of the LED indicator and the number of lights indicate the active

mode as described below.

W

White LED

B

Blue LED

R

Red LED

G

Green LED

Mode

Remote control

Button

LED indicator

D.IN

W

Bluetooth

B

Connected status

B

Slow-Blinking

Disconnected status

Bluetooth

pairing

B

Fast-Blinking

AUX

W W

USB

W W W

ENG - 10

󰟴

NFC

Logo

You can activate your Bluetooth connection by placing your phone in the NFC detection area

of the Soundbar.

󰟵

Source

Selects the source input mode. (D.IN / Bluetooth / AUX / USB)

• To turn on “Bluetooth pairing” mode, change the source to “Bluetooth” mode and then

press and hold the button for more than 5 seconds.

Bottom Panel of the Soundbar

Bottom of the Soundbar

AUX IN

POWER

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

POWER

AUX IN

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

POWER

AUX IN

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

󰟳

󰟵

󰟴

󰟶

󰟳

POWER Connect the Soundbar's AC power cord.

󰟴

AUX Connect to the Analog output of an external device.

󰟵

D.IN Connect to the digital (optical) output of an external device.

󰟶

USB Connect a USB device here to play music les on the USB device through the Soundbar.

•

When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.

•

When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

•

If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in the Audio

Setup menu of your TV. Refer to the owner’s manual supplied with your TV.

•

When disconnecting the power cord from a wall outlet, pull the plug. Do not pull the cable.

•

Do not connect this unit or other components to an AC outlet until all connections between

components are complete.

ENG - 11

03 THE REMOTE CONTROL

• The images, buttons, and functions of the remote control may differ depending on the model.

Turns the Soundbar on and off.

Press this button to mute the sound.

Press it again to unmute the sound.

Press this button to pair a new

Bluetooth device.

Press to enter the "USB" mode.

Push this button up or down to

adjust the bass volume within a -6 to

+6 range.

Press to enter the "AUX" mode.

Press the

button to select the

previous music le.

Press the

button to play/pause

a music le.

Press the

button to select the

next music le.

Press to select the desired

sound effect by choosing

SURROUND or STANDARD.

Push this button up or down to

adjust the volume.

The playback mode of the USB

storage device changes to

random repeat.

Press to enter the “D.IN” mode.

Press to enter the “Bluetooth”

mode.

ENG - 12

Using the Hidden Buttons (Buttons with more than one function)

Hidden Button

How to Use the Remote Control

Remote Control

Button

Function

Auto Power

Down On/Off

(AUX mode)

– D.IN / BT / USB / AUX Mode : If there is no audio signal for

18 minutes.

– If there is no KEY input for 8 hours when the Audio (AUX) Cable

is connected. (Auto Power Down function can be turned off

only in that case.)

– To turn off Auto Power Down function, while in “AUX” mode,

press and hold the button for 5 seconds.

LED indicator

W W

G

Blinking

Auto Power Down On

W W

R

Blinking

Auto Power Down Off

Initialize

(Standby)

Press the button for 5 seconds in the standby power off station to

trigger the system initial function.

– This operation will not clear bluetooth paired history.

LED indicator

W W W W

R

Blinking X 2

TV remote

control On/Off

(Standby)

For detailed information about TV remote control, please see "Adjusting

the Soundbar volume with a TV remote control" on page 14.

TV Connect

(Bluetooth mode)

For detailed information about TV Connect, please see "Disconnecting

the Soundbar from the TV” on page 19.

ENG - 13

Bluetooth Power

On/Off

Press the button for 5 seconds in the power on station to trigger

the Bluetooth Power On/Off function.

LED indicator

B

W

G

Blinking

Bluetooth Power On

B

W

R

Blinking

Bluetooth Power Off

Auto Power Link

On/Off

For detailed information about Auto Power Link On/Off

function, please see “Auto Power Link” on page 17.

ENG - 14

Adjusting the Soundbar volume with a TV remote control

If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote

control that came with your Samsung TV.

First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your

Samsung remote to control the Soundbar’s volume. For more information, see the TV’s user manual.

The default mode for this function is control by a Samsung TV.

1. If your TV is not a Samsung TV and you want your TV’s remote to control the Soundbar’s volume,

you can change the settings of this function by pressing and holding the BASS button

repeatedly. To have your TV’s remote adjust the Soundbar’s volume, follow Steps 1 through

3 below.

2. If you want to turn off this function completely, follow Steps 1 and 2.

Mode Remote control Button LED indicator

1.

Turn off

All LED’s Off

2.

“Off” mode

5 Sec

W W W W

Blinking

3.

“All TV” mode

5 Sec

W W W W

Blinking

4.

“Samsung TV” mode

(Default mode)

5 Sec

W W W W

Blinking

– Each time you press the BASS button and hold it for 5 seconds, the mode switches in the

following order:

“Samsung TV” (Default mode) → “Off” → “All TV”.

– The LED’s blink for 3~4 seconds, then return to the standby power off mode.

– This function may not be available, depending on your TV`s remote control.

– Manufacturers supporting this function: VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,

Hisense, RCA

ENG - 15

04 CONNECTING THE SOUNDBAR

Connecting Electrical Power

• For information about the required electrical power and power consumption, refer to the label

attached to the product. (Label : Bottom of the Soundbar Main Unit)

AUX IN

POWER

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

POWER

Power Cord

Electrical Outlet

Bottom of the Soundbar Main Unit

ENG - 16

05 CONNECTING TO A TV

Hear TV sound from your Soundbar through wired or wireless connections.

• When the Soundbar is connected to selected Samsung TVs, you can control the Soundbar using the

TV’s remote control.

– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when

you connect the Soundbar to the TV using an optical cable.

– This function also allows you to use the TV menu to adjust the sound eld and various settings

as well as the volume and mute.

Connecting using an Optical Cable

Step 1. Connect an Optical Cable

USB (5V 0.5A)

AUX IN

DIGITAL AUDIO IN

(OPTICAL)

OPTICAL OUT

Optical Cable

(not supplied)

Bottom of the Soundbar

NOTE

– When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on

your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the

setting on the TV is changed, you will experience better sound quality. (The TV menu may use

different words for Dolby Digital and PCM depending on the TV manufacturer.)

ENG - 17

Step 2. Change the Soundbar’s mode to D.IN

Right Side of the Soundbar

(OR)

W

Auto Power Link

This Function automatically turns on the Soundbar when the TV is turned on if the Soundbar is

connected to the TV by an Optical Cable (not supplied).

Press and hold the button on the remote control for more than 5 seconds to toggle this function.

• Auto Power Link is set to ON by default.

• Depending on the connected device, Auto Power Link may not function.

• This function is only available in the “D.IN” mode.

Mode Remote control Button LED indicator

OFF

5 Sec

W W

R

Blinking

ON

5 Sec

W W

G

Blinking

ENG - 18

Connecting a TV or Bluetooth Device via Bluetooth

Step 1. Change the Soundbar mode to “Bluetooth Pairing”

B

Fast-Blinking

Step 2. Select the Soundbar in your TV’s or Bluetooth device’s Menu

Select

“[AV] Samsung Soundbar T400 T-Series”

Bluetooth device

(OR)

Bluetooth menu

NOTE

– You cannot connect more than one TV or Bluetooth device at a time.

Step 3. Check the Soundbar’s status

The blue LED should not be blinking once the Bluetooth connection is complete.

B

If the TV or device fails to connect

• If a previously connected Soundbar listing appears in the device list of your TV or Bluetooth device,

delete it. (e.g. “[AV] Samsung Soundbar T400 T-Series”)

• Then repeat steps 1 through 3.

ENG - 19

Disconnecting the Soundbar from the TV

Press the button on the right side panel or on the remote control and switch to any mode but

“Bluetooth”.

• Disconnecting takes time because the TV must receive a response from the Soundbar.

(The time required may differ, depending on the TV model.)

• To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold

button for 5 seconds in “Bluetooth Ready” mode. TV Connect is turned OFF.

• To turn TV Connect back on, press and hold the button for 5 seconds with the Soundbar in

“Bluetooth Ready” mode.

• TV Connect is set to ON by default.

Mode Remote control Button LED indicator

TV Connect-OFF

5 Sec

B

W W

R

Blinking

TV Connect-ON

5 Sec

B

W W

G

Blinking

Connecting a Soundbar to a mobile device via NFC function

Step 1. Place your mobile device in the NFC detection area on top of the Soundbar

Bluetooth device

NFC

Top of the Soundbar

NOTES

– Make sure that your mobile device has the NFC function turned on and that the screen is active.

– Bluetooth connection is unavailable when NFC of the mobile device is in card emulation mode.

ENG - 20

Step 2. Check the Soundbar’s status

The blue LED should not be blinking once the Bluetooth connection is complete.

B

NOTES

– If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

– The Soundbar automatically turns off after 18 minutes in the Ready state.

– The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

– If there is a strong electrical eld around the Soundbar.

– If several Bluetooth devices are simultaneously paired with the Soundbar.

– If the Bluetooth device is turned off, not in place, or malfunctions.

– Electronic devices may cause radio interference. Devices that generate electromagnetic waves

must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

– The Soundbar supports SBC data (44.1kHz, 48kHz).

– Connect only to a Bluetooth device that supports the A2DP (AV) function.

– You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)

function.

– Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar T400

T-Series” from the device’s scanned devices list will automatically change the Soundbar to “BT”

mode.

– Available only if the Soundbar is listed among the Bluetooth device’s paired devices.

(The Bluetooth device and the Soundbar must have been previously paired at least once.)

– The Soundbar cannot be paired to another Bluetooth device if already in Bluetooth mode and

paired to a Bluetooth device.

La page est en cours de chargement...

Samsung HW-T40M Manuel utilisateur

Ce manuel convient également à

Samsung HW-T40M Manuel utilisateur

dans d''autres langues

Documents connexes