3-Control panel
9
3.5 Function buttons
The function buttons (Fig. 3-6) enables additional op
tions in the selected programme before programme
start. The related indicators are displayed.
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete the setting or to cancel the setting process,
press the function button until the desired LED lights
3.5.1-Function button „Temp.“
Press this button (Fig. 3-7) to change the washing
t
emperature of the programme. If no value is illumi
nated the water will not heated.
In conjunction with the “Steam” button, the child lock
3.5.2-Function button “Speed”
Press this button (Fig. 3-8) to change or deselect the
spin of the programme. If no value is illuminated the
laundry will not spun.
Note: Factory settings
there is no special requirement default settings are recommended.
3.4 Detergent drawer
Open the drawer, three compartments can be
seen (Fig. 3-5):
Compartment 1 : Water inlet only, no detergent
Compartment 2 : Detergent for programme
Compartment
: Softener, Conditioning agent etc.
The recommendation on the type of detergents is
suitable for the various washing temperatures, please
refer to the manual of detergent.
3-5
3.5.3-Function button “Steam“
Press this button (Fig. 3-9) to activate the steam function.
When this function is activated the default temperature is the maxi-
mum temperature of the programme selected.
This function can be activated only with the following programmes:
Hygienic, Baby clothes, Mix, Synthetics, Cotton.
When the function is activated the led above the button will light up.
Pushing again this button the function can be deactivated and the led
above the button will turn off.
Steam
3-9
3-7 3-8
Temp.
Speed
Temp
Speed Steam
Delay
Extra rinse
1 3.5.2 3.5.3 3.5.4 3.5.5
3-6