Tunturi E100 Le manuel du propriétaire

Catégorie
Fitness, gymnastique
Taper
Le manuel du propriétaire
Attention, Achtung, Attention, Attentie
- Please read this Owner’s manual before assembling this product.
- Bitte lesen Sie dieses Handbuch durch, bevor Sie mit er Montage dieses Produkts beginnen.
- Veuillez lire ce manuel avant de commencer le montage de ce produit.
- Leest u deze handleiding voordat u dit apparaat installeert.
www.tunturi.com
User manual
Benutzerhandbuch
Manuel de l’utilisateur
Gebruikershandleiding
Serial number
Seriennummer
Numéro de série
Serienummer
Star Fit E100 Bike
CE EN957
Class HC
MADE IN CHINA
MAX USER WEIGHT: 120 KG
MAX input: 9V-DC 0,5 Amp
265 LBS
HOME USE
Serial nr:
3
Star Fit E100
A
4
Star Fit E100
B
NO. 11
5
Star Fit E100
C
100 cm
100 cm
100 cm
100 cm
D-0
6
Star Fit E100
D-1
7
Star Fit E100
D-2
8
Star Fit E100
D-3
13
9
Star Fit E100
D-4
B
C
A
D
10
Star Fit E100
D-5
11
Star Fit E100
E-1
E-2
MAX input: 9V-DC 0,5 Amp
12
Star Fit E100
F-01
PROGRAM 1
F-07
PROGRAM 7
F-02
PROGRAM 2
F-08
PROGRAM 8
F-03
PROGRAM 3
F-09
PROGRAM 9
F-04
PROGRAM 4
F-10
PROGRAM 10
F-05
PROGRAM 5
F-11
PROGRAM 11
F-06
PROGRAM 6
F-12
PROGRAM 5
PROGRAM 12
13
Star Fit E100
F-13
PROGRA3 5
PROGRAM 13
F-19
PROGRA3 5
PROGRAM 19
F-14
PROGRA3 5
PROGRAM 14
F-15
PROGRA3 5
PROGRAM 15
F-16
PROGRA3 5
PROGRAM 16
F-17
PROGRA3 5
PROGRAM 17
F-18
PROGRA3 5
PROGRAM 18
14
English
Index
Upright Bike ...................................................... 14
Safety warnings ................................................ 14
Electrical safety 15
Description (g. A) 15
Package contents (g. B & C) 15
Assembly (g. D) 15
Workouts ...........................................................15
Exercise Instructions 15
Heart rate 16
Use ..................................................................... 16
Power supply (Fig. E-1) 17
Console (g F) .................................................. 17
Explanation Display functions 17
Explanation of buttons 18
Opperation 18
Programs 18
Cleaning and maintenance .............................. 21
Defects and malfunctions 21
Transport and storage...................................... 21
Additional information 21
Technical data ................................................... 21
Warranty ............................................................ 22
Declaration of the manufacturer ..................... 22
Disclaimer ......................................................... 22
Upright Bike
Welcome to the world of Tunturi New Fitness!
Thank you for purchasing this piece of Tunturi
equipment. Tunturi offers a wide range of home fitness
equipment, including crosstrainers, treadmills, exercise
bikes and rowers. The Tunturi equipment is suitable for
the entire family, no matter what fitness level. For more
information, please visit our website
www.tunturi.com
Safety warnings
WARNING
Read the safety warnings and the instructions.
Failure to follow the safety warnings and the
instructions can cause personal injury or damage
to the equipment. Keep the safety warnings and
the instructions for future reference.
- The equipment is suitable for domestic use only.
The equipment is not suitable for commercial use.
- Max. usage is limited to 3 hrs a day.
- The use of this equipment by children or persons
with a physical, sensory, mental or motorial
disability, or lack of experience and knowledge can
give cause to hazards. Persons responsible for their
safety must give explicit instructions or supervise
the use of the equipment.
- Before starting your workout, consult a physician to
check your health.
- If you experience nausea, dizziness or other
abnormal symptoms, immediately stop your
workout and consult a physician.
- To avoid muscular pain and strain, start each
workout by warming up and finish each workout by
cooling down. Remember to stretch at the end of
the workout.
- The equipment is suitable for indoor use only. The
equipment is not suitable for outdoor use.
- Only use the equipment in environments with
adequate ventilation. Do not use the equipment in
draughty environments in order not to catch a cold.
- Only use the equipment in environments with
ambient temperatures between 10 °C and 35 °C.
Only store the equipment in environments with
ambient temperatures between 5 °C and 45 °C.
- Do not use or store the equipment in humid
surroundings. The air humidity must never be more
than 80%.
- Only use the equipment for its intended purpose.
Do not use the equipment for other purposes than
described in the manual.
- Do not use the equipment if any part is damaged or
defective. If a part is damaged or defective, contact
your dealer.
- Keep your hands, feet and other body parts away
from the moving parts.
- Keep your hair away from the moving parts.
- Wear appropriate clothing and shoes.
- Keep clothing, jewellery and other objects away
from the moving parts.
- Make sure that only one person uses the equipment
at a time. The equipment must not be used by
persons weighing more than 120 kg (265 lbs).
- Do not open equipment without consulting your
dealer.
15
English
Electrical safety
(Only for equipment with electric power)
- Before use, always check that the mains voltage is
the same as the voltage on the rating plate of the
equipment.
- Do not use an extension cable.
- Keep the mains cable away from heat, oil and sharp
edges.
- Do not alter or modify the mains cable or the mains
plug.
- Do not use the equipment if the mains cable or the
mains plug is damaged or defective. If the mains
cable or the mains plug is damaged or defective,
contact your dealer.
- Always fully unwind the mains cable.
- Do not run the mains cable underneath the
equipment. Do not run the mains cable underneath
a carpet. Do not place any objects on the mains
cable.
- Make sure that the mains cable does not hang over
the edge of a table.
- Make sure that the mains cable cannot be caught
accidentally or tripped over.
- Do not leave the equipment unattended when the
mains plug is inserted into the wall socket.
- Do not pull the mains cable to remove the mains
plug from the wall socket.
- Remove the mains plug from the wall socket when
the equipment is not in use, before assembly or
disassembly and before cleaning and maintenance.
Description (fig. A)
Your upright bike is a piece of stationary fitness
equipment used to simulate cycling without causing
excessive pressure to the joints.
Package contents (fig. B & C)
- The package contains the parts as shown in
fig. B.
- The package contains the fasteners as shown in fig.
C. Refer to the section “Description”
NOTE
If a part is missing, contact your dealer.
Assembly (fig. D)
WARNING
Assemble the equipment in the given order.
Carry and move the equipment with at least two
persons.
CAUTION
Place the equipment on a firm, level surface.
Place the equipment on a protective base to
prevent damage to the floor surface.
Allow at least 100 cm of clearance around the
equipment.
Refer to the illustrations for the correct assembly
of the equipment.
Workouts
The workout must be suitably light, but of long
duration. Aerobic exercise is based on improving
the body’s maximum oxygen uptake, which in turn
improves endurance and fitness. You should perspire,
but you should not get out of breath during the
workout.
To reach and maintain a basic fitness level, exercise at
least three times a week, 30 minutes at a time. Increase
the number of exercise sessions to improve your fitness
level. It is worthwhile to combine regular exercise with
a healthy diet. A person committed to dieting should
exercise daily, at first 30 minutes or less at a time,
gradually increasing the daily workout time to one hour.
Start your workout at low speed and low resistance to
prevent the cardiovascular system from being subjected
to excessive strain.
As the fitness level improves, speed and resistance can
be increased gradually. The efficiency of your exercise
can be measured by monitoring your heart rate and
your pulse rate.
Exercise Instructions
Using your fitness trainer will provide you with several
benefits, it will improve your physical fitness, tone
muscle and in conjunction with a calorie controlled diet
help you lose weight.
The warming up phase
This stage helps get the blood flowing around the body
and the muscles working properly. It will also reduce
the risk of cramp and muscle injury. It is advisable to do
a few stretching exercises as shown below. Each stretch
should be held for approximately 30 seconds, do not
force or jerk your muscles into a stretch - if it hurts,
STOP
16
English
The exercise phase
This is the stage where you put the effort in. After
regular use, the muscles in your legs will become
more flexible. Work to your but it is very important to
maintain a steady tempo throughout. The rate of work
should be sufficient to raise your heart beat into the
target zone shown on the graph below.
200
180
160
140
120
100
80
20 25 30 35 40 45 50 55 60 65 70 75
85 %
70 %
AGE
MAXIMUM
COOL DOWN
HEART RATE
TARGET ZONE
This stage should last for a minimum of 12 minutes
though most people start at about 15-20 minutes
The cool down phase
This stage is to let your Cardiovascular System and
muscles wind down. This is a repeat of the warm
up exercise e.g. reduce your tempo, continue for
approximately 5 minutes. The stretching exercises
should now be repeated, again remembering not to
force or jerk your muscles into the stretch.
As you get fitter you may need to train longer and
harder. It is advisable to train at least three times a
week, and if possible space your workouts evenly
throughout the week.
Muscle toning
To tone muscle while on your fitness trainer you will
need to have the resistance set quite high. This will
put more strain on our leg muscles and may mean you
cannot train for as long as you would like. If you are also
trying to improve your fitness you need to alter your
training program. You should train as normal during the
warm up and cool down phases, but towards the end
of the exercise phase you should increase resistance
making your legs work harder. You will have to reduce
your speed to keep your heart rate in the target zone.
Weight loss
The important factor here is the amount of effort you
put in. The harder and longer you work the more
calories you will burn. Effectively this is the same as if
you were training to improve your fitness, the difference
is the goal.
Heart rate
Pulse rate measurement
(hand pulse sensors)
The pulse rate is measured by sensors in the handlebars
when the user is touching both sensors at the same
time. Accurate pulse measurement requires that the
skin is slightly moist and constantly touching the hand
pulse sensors. If the skin is too dry or too moist, the
pulse rate measurement will become less accurate.
NOTE
Do not use the hand pulse sensors in
combination with a heart rate chest belt.
If you set a heart rate limit for your workout, an
Maximum heart rate
(during training)
The maximum heart rate is the highest heart rate a
person can safely achieve through exercise stress. The
following formula is used to calculate the average
maximum heart rate: 220 - AGE. The maximum heart
rate varies from person to person.
WARNING
Make sure that you do not exceed your
maximum heart rate during your workout. If you
belong to a risk group, consult a physician.
Beginner
50-60% of maximum heart rate
Suitable for beginners, weight-watchers, convalescents
and persons who have not exercised for a long time.
Exercise at least three times a week, 30 minutes at a
time.
Advanced
60-70% of maximum heart rate
Suitable for persons who want to improve and maintain
fitness. Exercise at least three times a week, 30 minutes
at a time.
Expert
70-80% of maximum heart rate
Suitable for the fittest of persons who are used to long-
endurance workouts.
Use
Adjusting the support feet
The equipment is equipped with 4 support feet. If
the equipment is not stable, the support feet can be
adjusted.
- Turn the support feet as required to put the
equipment in a stable position.
- Tighten the lock-nuts to lock the support feet.
NOTE
- The machine is the most stable when all support
feet are turned fully in. Therefore start to level the
machine by turning all support feet fully in, before
turning out the required support feet to stable the
machine. .
17
English
Adjusting the vertical seat position
The vertical seat position can be adjusted by setting the
seat tube to the required position. With the leg almost
straight, the arch of the foot must touch the pedal at its
lowermost point.
- Loosen the seat tube adjustment knob.
- Move the seat tube to the required position.
- Tighten the seat tube adjustment knob.
Adjusting the horizontal seat position
(fig. E-2)
The horizontal seat position can be adjusted by setting
the seat to the required position.
- Loosen the quick release lever under the seat.
- Slide the seat forward or backward as desired.
- Tighten the quick release lever.
Adjusting the handlebar
The handlebar can be adjusted according to the height
and the exercise position of the user.
- Loosen the handlebar adjustment knob.
- Move the handlebar to the required position.
- Tighten the handlebar adjustment knob.
Power supply (Fig. E-1)
The trainer is powered by an external power supply.
Refer to the illustration to locate the trainer power
input.
NOTE
Connect the power supply with the trainer
before connecting it to the wall outlet.
Always remove power cord when
machine is not in use.
Console (fig F)
1. Display
2. Buttons
3. Tablet/ book support
CAUTION
Keep the console away from direct sunlight.
Dry the surface of the console when it is covered
with drops of sweat.
Do not lean on the console.
Only touch the display with the tip of your finger.
Make sure that your nails or sharp objects do not
touch the display.
NOTE
The console switches to standby mode when the
equipment is not used for 4 minutes.
Explanation Display functions
Time
- Without setting the target value, time will count up.
- When setting the target value, time will count down
from your target time to 0 and alarm will sound or
flash.
- Range 0:00~99:59
Speed
- Displays current training speed.
Maximum speed is 99.99 KM/H
- Without any signal being transmitted into the
monitor for 3 seconds during workout, SPEED will
display “0.0”
18
English
RPM
- Displays the Rotation Per Minute.
Display range 0~20~999.
- Without any signal being transmitted into the
monitor for 3 seconds during workout, RPM will
display “0”
Distance
- Without setting the target value, distance will count
up.
- When setting the target value, distance will count
down from your target distance to 0 with an alarm
sound or flash.
- Range 0.00~99.99
Odo
- Automatically accumulates the Total distance for all
exercise sessions.
- Range: 0.0 ~ 99.99 KM/ 0.00 ~ 9999 KM.
Calories
- Without setting the target value, calorie will count
up.
- When setting the target value, calories will count
down from your target calorie to 0 with an alarm
sound or flash.
- Range 0~999.9.
NOTE
This data is a rough guide for comparison of
different exercise sessions which cannot be used
in medical treatment
Watt
- Display current workout watts.
- Range: 0.0 ~ 999.9 Watt.
Target HR
- Display user Target Heart rate
(in workout mode only)
Based on 70% of max. HR (220-Age)
Age
- Display user age (in programming mode only)
- Range: 10 ~ 99
Pulse
- Current pulse will display after 6 seconds when
detected by the console.
- Without any pulse signal for 6 seconds, console will
display “P”.
- Pulse alarm will sound when current pulse is over
the target pulse.
- Range 0-60 ~ 220 BPM.
Level
- Shows tension level setting.
- Range: 1 ~ 24
Program
- Show current selected workout mode. (1 ~ 19)
Explanation of buttons
Arrow up
- Increase resistance level in workout mode
- Setting selection in programming mode.
Arrow down
- Decrease resistance level in workout mode.
- Setting selection in programming mode.
Mode
- Press MODE button to switch between the
parameters of the multi display windows.
(in workout mode)
Enter
- Confirm setting or selection.
Start/ Stop
- Start or Stop workout.
- Push and hold ”Start/ Stop” button for 3 seconds
to reset: Time, Speed, Distance, Calories, Pulse &
Program.
Recovery
- After the console detects pulse signal, press the
RECOVERY key to enter recovery mode to monitor
heart rate recovery ability
Opperation
Power on
- Plug in power supply to power on computer.
- Press any key to power on the console when being
in sleep mode..
- Start pedalling to power on the console when being
in sleep mode.
Power off
Without any signal being transmitted into the monitor
for 4 minutes the monitor will enter SLEEP mode
automatically. (Active training data will be lost)
Programs
Programs (fig. - F-01~F19)
Quick start (Program 1)
- Press START/ STOP key to start your workout
without any pre-set setting.
- Use UP/ DOWN to adjust resistant level during
workout.
19
English
End your workout
- Press START/ STOP in workout mode to stop/
pause your workout.
To resume your workout press START/ STOP button
in pause mode.
- Press and hold START/ STOP key for over 2 seconds
to reset console. (Active training data will be lost)
Program mode (Program 1~9)
- Use UP/ DOWN key to select Program 1 ~ 9 and
press ENTER to confirm.
- Use UP/ DOWN key to set TIME,
Range: 0:00 - 5:00 ~ 99:00 ±1:00
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set DISTANCE,
Range: 00.00 - 00.10 ~ 99.90 ± 00.10
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set CALORIES,
Range: 0.0 - 1.0 ~ 999.0 ± 1.0
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set AGE,
Range: 10 ~ 99 ± 1
confirm setting by pressing ENTER
NOTE
When setting more than one goal, the training
will end at first achieved goal.
Continue the workout by pressing START/ STOP
button, and training will end again at first next
achieved goal.
Leave a goal blank and it will not be seen as a
pre-set limit.
Target HR is only for visual reference, pulse
information will blink when value is over target.
- Press START/ STOP key to start workout
- Use UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window.
- Press START/STOP key to pause workout.
- Press and hold START/ STOP key for over 2 seconds
to reset console and to go back to main menu.
(Active training data will be lost)
Program mode (Program 10)
- Use UP/ DOWN key to select Program 10 and press
ENTER to confirm.
- Use UP/ DOWN key to set TIME,
Range: 0:00 - 5:00 ~ 99:00 ±1:00
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set DISTANCE,
Range: 00.00 - 00.10 ~ 99.90 ± 00.10
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set CALORIES,
Range: 0.0 - 1.0 ~ 999.0 ± 1.0
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set WATT
Range: 20 ~ 300 ± 10
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set AGE,
Range: 10 ~ 99 ± 1
confirm setting by pressing ENTER
NOTE
When setting more than one goal, the training
will end at first achieved goal.
Continue the workout by pressing START/ STOP
button, and training will end again at first next
achieved goal.
Leave a goal blank and it will not be seen as a
pre-set limit.
- Press START/ STOP key to start workout
- Use UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window.
- Press START/STOP key to pause workout.
- Press and hold START/ STOP key for over 2 seconds
to reset console and to go back to main menu.
(Active training data will be lost)
Body Fat (Program 11)
- Use UP/ DOWN key to select Program 11 and press
ENTER to confirm.
- Use UP/ DOWN key to set gender,
Range: Male / Female
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set Height,
Range: 110.0 ~ 199.5 cm ± 0.5
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set Weight,
Range: 10.0 ~ 200.0 kg ± 0.2
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set Age,
Range: 10 ~ 99 ± 1
confirm setting by pressing ENTER
- Press START/ STOP key to start Body fat
measurement.
- During measuring, users have to hold both hands
on the Hr. hand grips. LCD display “- - - -” for 15
seconds until computer finish measuring.
- LCD will display: FAT%, BMR, BMI & BODY TYPE:
NOTE
Correct “User Profile Settings” is required for this
function.
Male Female
1 7.0%~ 9.9% 1 14.0%~16.9%
2 10.0% to 12.9%. 2 17.0% to 19.9%.
3 13.0% to 16.9%. 3 20.0% to 23.9%.
4 17.0% to 19.9%. 4 24.0% to 26.9%
5 20.0% to 24.9%. 5 27.0% to 29.9%.
6 25%. + 6 30.0%. +
(Body type result table)
Target heart rate. (Program 12)
- Use UP/ DOWN key to select Program 12 and press
20
English
ENTER to confirm.
- Use UP/ DOWN key to set TIME,
Range: 0:00 - 5:00 ~ 99:00 ±1:00
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set DISTANCE,
Range: 00.00 - 00.10 ~ 99.90 ± 00.10
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set CALORIES,
Range: 0.0 - 1.0 ~ 999.0 ± 1.0
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set pulse (TARGET HR) limit
Range: 0 - 72 ~ 240 ± 1
confirm setting by pressing ENTER.
NOTE
When setting more than one goal, the training
will end at first achieved goal.
Continue the workout by pressing START/ STOP
button, and training will end again at first next
achieved goal.
Leave a goal blank and it will not be seen as a
pre-set limit.
Set Pulse limit is resistance control function,
Resistance will auto lower when value is over
pulse target, and auto upper when under pulse
target.
- Press START/ STOP key to start workout
- Use UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window.
- Press START/ STOP key to pause workout.
- Press and hold START/ STOP key for over 2 seconds
to reset console and to go back to main menu.
(Active training data will be lost)
H.R.C. mode. (Program 13~15)
- Use UP/ DOWN key to select Program 13~15
P13= 60% 60% of (220-Age)
P14= 75% 75% of (220-Age)
P14= 85% 85% of (220-Age)
and press ENTER to confirm.
- Use UP/ DOWN key to set TIME,
Range: 0:00 - 1:00 ~ 99:00 ±1:00
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set DISTANCE,
Range: 00.00 - 00.10 ~ 99.90 ± 00.10
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set CALORIES,
Range: 0.0 - 1.0 ~ 999.0 ± 1.0
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set Age,
Range: 10 ~ 99 ± 1
confirm setting by pressing ENTER
NOTE
When setting more than one goal, the training
will end at first achieved goal.
Continue the workout by pressing START/ STOP
button, and training will end again at first next
achieved goal.
Leave a goal blank and it will not be seen as a
pre-set limit.
Set Pulse limit is resistance control function,
Resistance will auto lower when value is over
pulse target, and auto upper when under pulse
target.
- Press START/ STOP key to start workout
- Use UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window.
- Press START/ STOP key to pause workout.
- Press and hold START/ STOP key for over 2 seconds
to reset console and to go back to main menu.
(Active training data will be lost)
User program (P16 ~ P19)
- Use UP/ DOWN key to select Program 16 ~ 19 and
press ENTER to confirm.
- Use UP/ DOWN key to set TIME,
Range: 0:00 - 1:00 ~ 99:00 ±1:00
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set DISTANCE,
Range: 00.00 - 00.10 ~ 99.90 ± 00.10
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set CALORIES,
Range: 0.0 - 1.0 ~ 999.0 ± 1.0
confirm setting by pressing ENTER.
- Use UP/ DOWN key to set Age,
Range: 10 ~ 99 ± 1
confirm setting by pressing ENTER.
- Set tension level for first of 10 columns, and confirm
with ENTER to set second level, repeat this for all
colums.
- Press START/ STOP key to start workout
- Use UP/ DOWN key to adjust resistance level.
Load level is shown in LEVEL window.
- Press START/ STOP key to pause workout.
- Press and hold START/ STOP key for over 2 seconds
to reset console and to go back to main menu.
(Active training data will be lost, but set program
profile will be stored )
Recovery
- The RECOVERY key will only be valid if pulse is
detected.
- TIME will show „0:60“ (seconds) and counts down
to 0.
- Computer will show F1 to F6 after the countdown
to test heart rate recovery status. User can find the
heart rate recovery level based on the chart below.
- Press RECOVERY key again to return to the
beginning.
F1 Outstanding
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Tunturi E100 Le manuel du propriétaire

Catégorie
Fitness, gymnastique
Taper
Le manuel du propriétaire