Gaggenau RC 462 705 Le manuel du propriétaire

Catégorie
Frigos
Taper
Le manuel du propriétaire

Ce manuel convient également à

*DJJHQDX
en Instruction manual . . . . . . . . . . . . . . . . . 2
fr Notice d'utilisation. . . . . . . . . . . . . . . . 28
es Instrucciones de uso . . . . . . . . . . . . . . 55
RC462705
RC472705
RC492705
Refrigerator
Réfrigérateur
Frigorífico
2
en-us
en Table of contents
en Instruction manual
Important safety instructions 3
Definitions 3
About these instructions 3
Introduction 3
Restriction of user group 3
Risk of explosion 3
Risk of electric shock 4
Risk of injury 4
Fire hazard/Danger due to refrigerants 4
Risk of fire 4
Risk of suffocation 5
Damage 5
Weight 5
State of California Proposition 65 Warnings 5
Intended use 6
Environmental protection 6
Packaging 6
Old appliances 6
Installation and connection 7
Contents of package 7
Technical data 7
Installing the appliance 7
Check built-in cut-out 7
Side-by-side installation 7
Saving energy 8
Before using for the first time 9
Electrical connection 9
Getting to know your appliance 10
Appliance 10
Operating controls 11
Equipment 12
Operating the appliance 13
Switching the appliance on 13
Switching off and disconnecting the appliance 13
Display lock for cleaning 13
Setting the temperature 13
Fast cooling 14
Eco mode 14
Self-test 14
Setting the brightness of the control panel 14
Setting the display screen 14
Setting the touch field color 15
Setting the touch field tone type. 15
Setting the touch field tone volume 15
Setting the signal tone volume 15
Dimming when door is opened and closed 15
Setting the temperature unit 16
Setting the language 16
Resetting to the factory settings 16
Switching demo mode on or off 16
Rest mode 17
Automatic door opening 17
Home network 18
Automatic display lock for cleaning 18
Alarm 18
Door alarm 18
Home Connect 19
Setting up Home Connect 19
Connecting the refrigerator to the Home
Connect app 20
Installing updates for the Home Connect
software 20
Customer Service access 20
Deleting network settings 20
Information on data protection 21
Refrigerator compartment 21
Note when storing food 21
Note the chill zones in the refrigerator
compartment 22
Vegetable bin 22
Vegetable container with humidity controller 22
Cool-fresh bin 22
Cleaning 23
Cleaning the display 23
Cleaning the appliance interior 23
Cleaning the equipment 23
Care instructions for stainless steel surfaces 23
Odors 24
Changing the odor filter 24
Noises 25
Normal noises 25
Preventing noises 25
Lighting 25
Faults – what to do? 26
Appliance 26
Customer service 27
Appliance self-test 27
Repair order and advice on faults 27
3
9 Important safety instructions
READ INSTRUCTIONS - DO NOT DISCARD!
(
Important safety instructions
Import ant safety instructionsREAD INSTRUCTIONS - DO NOT DISCARD!
Definitions
9 WARNING
Non-observance of this warning
could result in death or serious
injuries.
9 CAUTION
Non-observance of this warning
could result in slight or moderately
serious injuries.
NOTICE
Non-observance of this information could
damage the appliance.
Note: This indicates important
information and/or tips.
About these instructions
Read and follow the operating and
installation instructions. They contain
important information on how to install,
use and maintain the appliance.
Retain all documents for subsequent
use or for the next owner.
Introduction
This appliance complies with the
relevant safety regulations for electrical
appliances.
The refrigeration circuit has been
checked for leaks.
Restriction of user group
Avoid placing children and vulnerable
persons at risk.
This appliance may be used by children
and persons who have reduced
physical, sensory or mental abilities or
inadequate experience and/or
knowledge, provided they are
supervised or have been instructed on
how to use the appliance safely and
have understood the resulting dangers.
Children should be supervised to
ensure that they do not play with the
appliance.
Risk of explosion
If the appliance's ventilation openings
are sealed, a leak in the refrigeration
circuit may result in a flammable
mixture of gas and air.
Keep ventilation openings in the
appliance enclosure or in the built-in
structure clear of obstruction.
Never use electric devices inside the
appliance (e.g. heaters or electric ice
makers).
Do not store products which contain
flammable propellants (e.g. spray cans)
or explosive substances in the
appliance.
Only store high-proof alcohol tightly
closed and upright.
Do not use additional means to
accelerate the defrosting process
other than those recommended by the
manufacturer.
9 Important safety instructions
READ INSTRUCTIONS - DO NOT DISCARD!
4
Risk of electric shock
Improper installations or repairs may put
the user at considerable risk.
When installing the appliance, make
sure that the power cord does not get
jammed or damaged.
In order to avoid danger, if the power
cord is damaged, disconnect the
appliance from the power source
immediately. Have the power cord
replaced by the manufacturer,
customer service or a similarly
qualified person.
Do not use multiple outlets, extension
cords, or adapters.
Before servicing the appliance or
carrying out installation work,
disconnect the appliance from the
power source or switch off the fuse.
Before cleaning the appliance, press
the main On/Off switch to switch the
appliance off.
Glass shelves and other fittings can be
moved without any risk while the
appliance is switched on.
Never cut through or remove the power
cord's third conductor (grounding
conductor).
Never defrost or clean the appliance
using a steam cleaner. The steam may
penetrate electrical parts and cause a
short circuit.
The appliance, cord and accessories
should only be repaired or replaced by
the manufacturer or an authorized
service provider.
Only use original parts supplied by the
manufacturer.
These parts come with a warranty from
the manufacturer that they satisfy the
safety requirements.
Risk of injury
Containers which contain carbonated
drinks may burst.
Fire hazard/Danger due to
refrigerants
The tubes of the refrigeration circuit
contain a small quantity of an
environmentally friendly but flammable
refrigerant (R600a). If the refrigerant
escapes, it may injure your eyes or ignite.
Do not damage the tubes.
If the tubes are damaged:
Keep open flames and ignition sources
away from the appliance.
Ventilate the room.
Switch off the appliance and unplug
the power cord.
Please contact customer service.
Risk of fire
Portable multi-outlet power strips
and portable power supplies may
overheat, causing a fire.
Never leave portable multi-outlet power
strips or portable power supplies
behind the appliance.
5
9 Important safety instructions
READ INSTRUCTIONS - DO NOT DISCARD!
Risk of suffocation
If the appliance features a door lock:
keep the key out of the reach of
children.
Keep children away from the packaging
and its parts.
Damage
To avoid damage:
Do not stand or lean on the base,
runners or doors.
Keep plastic parts and door seals free
of oil and grease.
Pull the power plug – not the power
cord.
Weight
The appliance is very heavy. The
appliance should always be transported
and set up by at least 2 people.
~ "Installing the appliance"
on page 7
State of California Proposition 65
Warnings
This product may contain a chemical
known to the State of California, which
can cause cancer or reproductive harm.
Therefore, the packaging of your product
may bear the following label as required
by California:
6
en-us Intended use
8
Intended use
Intended use
Use this appliance
Only for refrigerating food.
only in the home and in the home environment.
only according to these operating instructions.
This appliance is intended for use at an elevation of no
more than 2000 meters above sea level.
7
Environmental protection
Environmental protection
Packaging
All materials are environmentally safe and recyclable:
Dispose of packaging in an environmentally
responsible manner.
Please ask your dealer or inquire at your local
authority about current means of disposal.
Old appliances
Valuable raw materials can be reclaimed by recycling old
appliances.
9 WARNING
Children may become locked in the appliance
and suffocate!
Before disposing of your old appliance:
Remove the door.
Leave shelves and bins in the appliance to
prevent children from climbing in.
Keep children away from the discarded
appliance.
9 CAUTION
Refrigerant and harmful gases may escape.
Do not damage the tubes of the refrigeration
circuit and insulation.
1. Pull out the power plug.
2. Cut through the power cord.
3. Have the appliance disposed of properly.
7
Installation and connection en-us
5
Installation and connection
Installation and connection
Contents of package
After unpacking all parts, check for any damage during
transport.
If you have any complaints, please contact the dealer
from whom you purchased the appliance or our customer
service.
~ "Customer service" on page 27
The delivery consists of the following parts:
Built-in appliance
Equipment (depending on model)
Installation material
Instruction manual
Installation instructions
Customer service booklet
Warranty enclosure
Information on the energy consumption and noises
Technical data
Refrigerant, cubic capacity and further technical
specifications can be found on the rating plate.
~ "Getting to know your appliance" on page 10
Installing the appliance
Installation location
The weight of the appliance may be up to 500 kg
depending on the model. The base must be sufficiently
stable and should not give. If necessary, reinforce the
floor.
Check built-in cut-out
The cut-out must fulfill these criteria:
Anti-tilt bracket must be fitted
Cut-out depth min. 24” (610 mm), for flush installation
25” (635 mm)
rectangular
stable – the side panels and the top must be min. 5/8"
(16 mm) thick and securely attached to the floor or
wall
Depth of shortest side panels min. 4” (100 mm)
Side-by-side installation
Observe the specifications in the installation instructions
for a side-by-side installation.
If a partition wall is required between the appliances it
must be at least 5/8" (16 mm) wide.
8
en-us Installation and connection
Saving energy
If you follow the instructions below, your appliance will use less power.
Note: The arrangement of the equipment does not affect the energy consumption of the appliance.
--------
Installing the appliance
Keep the appliance out of direct sunlight. The appliance needs to cool less frequently at low
ambient temperatures and therefore consumes less
power.
Install the appliance as far away as possible from heat-
ing elements, cooker and other heat sources:
At least 1¼” (3 cm) from electric or gas cookers.
At least 11¾" (30 cm) from oil or solid-fuel cookers.
Select an installation location at a room temperature of
approx. 68 °F (20 °C).
Do not cover or block the ventilation openings. The appliance needs to cool less frequently if the warm
air can escape and therefore consumes less power.
Ventilate the room daily.
Using the appliance
Open the appliance door only briefly. The air in the appliance does not warm up so intensely.
The appliance needs to cool less frequently and there-
fore consumes less power.
Transport purchased food in a cool bag and place in
the appliance quickly.
Allow warm food and drink to cool down before placing
in the appliance.
Thaw frozen food in the refrigerator compartment to
utilize the low temperature of the frozen food.
Always leave a space between the food and the back
panel.
The air can circulate and the humidity will remain con-
stant.The appliance needs to cool less frequently and
therefore consumes less power.
Pack food airtight.
Do not cover or block the ventilation openings. The appliance consumes less power if the warm air
can escape.
Vacuum the ventilation openings once a year.
9
Installation and connection en-us
Before using for the first time
1. Remove information material, adhesive tape and
protective foil.
2. Clean the appliance.
~ "Cleaning" on page 23
Electrical connection
9 CAUTION
Do not connect the appliance to electronic energy
saver plugs.
Note: You can connect the appliance to mains-controlled
and sine-controlled inverters.
Mains-controlled inverters are used for photovoltaic
systems which are connected directly to the national grid.
Sine-controlled inverters must be used for isolated
applications. Isolated applications, e.g. on ships or in
mountain lodges, are not directly connected to the
national grid.
1. After installing the appliance, wait at least 1 hour
before connecting it to prevent damaging the
compressor.
2. Check that the outlet was installed according to the
regulations and complies with the requirements.
Requirements for outlets
Maximum simultaneous load
3. Connect the appliance to an outlet near the appliance.
The outlet must also be freely accessible following
installation of the appliance.
If free access is impossible, an all-pole isolating
switch must be integrated into the permanent
electrical installation according to the installation
regulations.
9 WARNING
Risk of electric shock!
Never use multiple outlets, extension cords or
adapters.
The appliance must be grounded correctly.
Never cut through or remove the power cord's
third conductor (grounding conductor).
Risk of electric shock!
If the power cord is too short, never use
multiple outlets or extension cords. Instead,
please contact customer service.
Outlet with 110 V ... 120 V
Protective conductor 60 Hz
Fuse 10 A ... 16 A
Appliance 6 A
10
en-us Getting to know your appliance
*
Getting to know your appliance
Getting to know your appliance
Appliance
à
R
4
°
C
0
°
C
(H
P
X
)"
)2
h
)*
`
)B
):
(...H Operating controls
P Main On/Off switch
X Door damper
` Rating plate
h Vegetable bin
)" Vegetable container with humidity
controller
)* Cool-fresh bin
)2 Automatic door opening
): Ventilation opening
)B Storage compartment for large bottles
11
Getting to know your appliance en-us
Operating controls
Main menu
Press à button to open the main menu.
In the main menu you can find:
Basic settings
Display lock for cleaning
Eco mode
Self-test
Rest mode (when active)
~ "Operating the appliance" on page 13
Basic settings menu
To access the Basic settings menu:
1. Press à button.
2. Press B button to move to the menu item Basic
settings.
3. Open the menu using button.
In the Basic settings menu you will find the following sub-
menus and setting options:
Brightness
Display screen
Touch field color
Touch field tone type
Touch field tone volume
Signal tone volume
Dimming when door is opened and closed
Temperature unit
Language
Factory settings
Demo mode
Rest mode
Automatic door opening
Home network
Automatic display lock for cleaning
~ "Operating the appliance" on page 13
( Touch fields
There are sensors under the touch fields.
Touching the symbol calls up the respective
function.
0 À button
Opens the menu for changing the
temperature and is used for selecting
compartments.
8 Refrigerator compartment temperature
display
Indicates the set temperature in °F/°C.
@ Cool-fresh compartment temperature display
Indicates the set temperature in °F/°C.
H à button
Opens main menu.
j
5

)

)
#
+
12
en-us Getting to know your appliance
Equipment
Shelf
You can remove and adjust the shelf:
1. Lift shelf and remove.
2. When re-inserting, insert hooks on back of shelf at
same height to make it level.
Note: Insert shelf carefully to avoid scratching the
appliance.
Container
You can remove the container:
Press container to the rear,
lift the container at the rear and remove.
You can insert the bin:
Pull out the telescopic rails all the way.
Place the bin on the telescopic rails and push into the
appliance until it engages.
13
Operating the appliance en-us
1
Operating the appliance
Operating the appliance
Switching the appliance on
1. Press the main On/Off switch.
The appliance starts cooling and the light is switched
on when the door is open.
2. Set the required temperature.
~ "Setting the temperature" on page 13
Operating tips
After the appliance has been switched on, it may take
several hours until the set temperature has been
reached. Do not put in any food until the selected
temperature has been reached.
The front sides of the housing are partly heated
slightly. This prevents condensation in the area
of the door seal.
Switching off and disconnecting the
appliance
Switching off the appliance
Press the main On/Off switch.
The appliance is no longer cooling.
Disconnecting the appliance
If you do not use the appliance for a prolonged period:
1. Remove groceries.
2. Press main On/Off switch.
The appliance is no longer cooling.
3. Pull out mains plug or switch off fuse.
4. Leave appliance open.
Display lock for cleaning
You can use this function to switch off the touch function
of the controls for 10 seconds. During this time you can
clean the display.
~ "Cleaning the display" on page 23
1. Press à button to open the main menu.
2. Press I button.
The cleaning display appears, and the countdown starts.
Setting the temperature
Recommended temperature
Cooling compartment
1. Use À button to select the desired compartment.
2. Keep pressing A/@ button until the display indicates
the required temperature.
3. The appliance stores the setting and automatically
returns to the main screen after a few seconds.
Cool-fresh compartment
1. Use À button to select the desired compartment.
2. Keep pressing A/@ button until the display indicates
the required temperature.
3. The appliance stores the setting and automatically
returns to the main screen after a few seconds.
Cooling compartment: +4 °C/+39 °F
Chill compartment: +1 °C/+34 °F
14
en-us Operating the appliance
Fast cooling
Fast cooling cools the refrigerator compartment as cold
as possible.
Switch on fast cooling, e.g.:
Before placing large quantities of food into the
compartment
For cooling drinks quickly
Note: When fast cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to normal
operation.
Switching on fast cooling:
1. To open the menu for setting the temperature, press
À button.
2. Press Û button.
When fast cooling is switched on, the symbol Û
appears on the display.
3. The appliance stores the setting and automatically
returns to the main screen after a few seconds.
Switching off fast cooling:
1. To open the menu for setting the temperature, press
À button.
2. Press ã button.
When fast cooling is switched off, the symbol Û
disappears from the display.
3. The appliance stores the setting and automatically
returns to the main screen after a few seconds.
Eco mode
Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
Refrigerator compartment: +43° F (6° C)
Cool-fresh container: +34° F (1° C)
Switching Eco mode on or off
1. Press à button to open the main menu.
2. Press C button to move to the menu item Eco mode.
3. Press I/& button.
The temperature is changed, and the display shows the
new temperature. When Eco mode is switched off, the
recommended temperature is set.
Note: You can also switch Eco mode on or off by
adjusting the temperature with A/@ buttons.
Self-test
This function can be used to start fault analysis on your
appliance.
~ "Appliance self-test" on page 27
Setting the brightness of the control
panel
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press % button to open the menu item Brightness.
5. Press B C buttons to set the required brightness.
6. Press button.
The setting is saved.
7. Press ' button to exit the menu.
Setting the display screen
You can choose between the settings Reduced and
Standard. With the setting Reduced only the temperature
and active special functions are displayed on the control
panel after a short period without operation. If the touch
fields are touched, all keys will be visible again.
With the setting Standard all keys always remain visible.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press C button to move to the menu item Display
screen.
5. Press % button.
6. Press B C buttons to move to the required setting.
7. Press button.
The setting is saved.
8. Press ' button to exit the menu.
15
Operating the appliance en-us
Setting the touch field color
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press C button to move to the menu item Touch field
color.
5. Press % button.
6. Press B C buttons to move to the required setting.
7. Press button.
The setting is saved.
8. Press ' button to exit the menu.
Setting the touch field tone type.
You can change or switch off the sound of the tones
generated when pressing keys.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button to open the menu item.
4. Press C button to move to the menu item Touch field
tone type.
5. Press % button to open the menu item.
6. Press B C buttons to select the required setting.
7. Press button.
The setting is saved.
8. Press ' button to exit the menu.
Setting the touch field tone volume
You can adjust the volume level of the sounds generated
when pressing keys.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button to open the menu item.
4. Press C button to move to the menu item Touch field
tone volume.
5. Press % button to open the menu item.
6. Press B C buttons to select the required setting.
7. Press button.
The setting is saved.
8. Press ' button to exit the menu.
Setting the signal tone volume
You can adjust the volume level of the signal tones
generated e.g. with alarms.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button to open the menu item.
4. Press C button to move to the menu item Signal tone
volume.
5. Press % button to open the menu item.
6. Press B C buttons to select the required setting.
7. Press button.
The setting is saved.
8. Press ' button to exit the menu.
Dimming when door is opened and
closed
If dimming is switched on, the light will slowly become
brighter when the door is opened, and then slowly darker
when it is closed.
Switching dimming on or off when opening and closing
the door
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press C button to move to the menu item Dimming
when door is opened and closed.
5. Press % button.
6. Press C button to move to the menu item On or
Off.Confirm by pressing button.
16
en-us Operating the appliance
Setting the temperature unit
You can choose between the unit °C and °F.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press B button to move to the menu item Temperature
unit.
5. Press % button.
6. Press B C buttons to move to the required unit.
7. Press button.
The unit will be changed.
8. Press ' button to exit the menu.
Setting the language
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press B button to move to the menu item Language.
5. Press % button.
6. Press B C buttons to move to the required language.
7. Press button.
The display restarts, and the start screen is displayed.
Resetting to the factory settings
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press B button to move to the menu item Factory
settings.
5. Press % button.
A signal tone sounds, and a message to confirm reset
appears.
6. Press button.
All settings are reset to the factory settings.
7. Press ' button to exit the menu.
Switching demo mode on or off
The cooling function of the appliance is switched off. All
other functions can be used.
Note: Do not store any food items in demo mode as the
appliance remains at room temperature.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press B button to move to the menu item Demo mode.
5. Press % button.
6. Press B C buttons to select the setting On or Off.
7. Press button.
The setting is saved.
8. Press ' button to exit the menu.
17
Operating the appliance en-us
Rest mode
The appliance switches off the following:
Automatic door opening
Note: With handle-free installation, please note that
you will not be supported when opening the door
during this time.
To open the door in this case, reach from below under
the bottom panel of the unit.
Audible signals
Interior light
Messages on the control panel
Background illumination of control panel is reduced
Switching Rest mode on or off
Displaying or hiding rest mode in the main menu
To use rest mode, you first have to display the function in
the main menu:
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press B button to move to the menu item Rest mode.
Press % button.
5. Press C buttons to move to the menu item Available or
Not available. Confirm by pressing button.
6. Press ' button to exit the menu.
The function is displayed or hidden in the main menu.
Switching rest mode on
1. Press à button to open the main menu.
2. Press / button to open the view Rest mode duration.
3. Press A/@ buttons to change the duration.
4. Press I button to start.
The appliance switches all listed functions off.
Switching rest mode off
After the selected time elapses, the appliance
switches over to normal operation.
To end rest mode before expiry of the selected time,
press & button.
Automatic door opening
The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the door.
9 CAUTION
Repeatedly closing the door too early will cause
automatic door opening to wear out or fail.
Do not close the door as long as automatic door
opening is still moved out.
If you have nevertheless closed the door, leave it
closed for 5 minutes. Automatic door opening will
re-adjust itself.
Open the menu item Automatic door opening:
1. Press à button to open the main menu.
2. Press B button to move to the Basic settings menu.
3. Press button to open the menu.
4. Press B button to move to the menu item Automatic
door opening.
5. To change the setting, press % button.
Switching on Push-to-open system
In an installation situation without handles you can select
the Push-to-open system. Your appliance will then open a
crack if you press lightly on the door.
Note: Please note that automatic door opening is
disabled if Rest mode is activated.
1. Open the menu item Automatic door opening.
2. Select menu item Push-to-open system.
3. Press button to open the menu item.
4. Select Opening force.Here you can select the level of
force required to activate automatic door opening.
5. Select Opening duration.Here you can select how long
the door should remain open a crack before it closes
again automatically.
Note: If the door only remains open a crack, the
appliance checks once a second whether the door is
still ajar.After the selected opening duration elapses,
the appliance will close the door automatically.
Switching on Pull-to-open system
In an installation situation with handles you can select the
Pull-to-open system. Your appliance will support you in
opening the door as soon as you pull on the handle.
1. Open the menu item Automatic door opening.
2. Select menu item Pull-to-open system.
3. Press button to open the menu item.
4. Select Opening force.Here you can select the level of
force required to activate automatic door opening.
Switching off automatic door opening
1. Open the menu item Automatic door opening.
2. Select menu item Off.
18
en-us Alarm
Home network
You can use this function to establish a connection
between the refrigerator and your mobile device.
~ "Home Connect" on page 19
Automatic display lock for cleaning
You can use this function to select whether the automatic
clean lock is switched on automatically when the door is
opened.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button.
4. Press B button to move to the menu item Automatic
display lock for cleaning.
5. To change the setting, press % button.
M
Alarm
Alarm
Door alarm
If the appliance door is open for a long time, the door
alarm (continuous audible signal) switches on.
Close door.
The audible warning signal is switched off.
19
Home Connect en-us
o
Home Connect
Home Connect
This appliance is Wi-Fi-capable and can be controlled
remotely using a mobile device.
Note: Wi-Fi is a registered trade mark of the Wi-Fi
Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still be
operated manually via the controls:
The appliance is not connected to a home network.
The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. Home Connect services are not
available in every country. You can find more
information on www.home-connect.com.
Note: Please observe the safety information in this
instruction manual. Ensure that this is also observed if
you operate the appliance via the Home Connect app and
are not at home when doing so.
~ "Important safety instructions" on page 3
Follow the instructions in the Home Connect app as well.
Setting up Home Connect
Notes
Wait at least 2 minutes after switching on the
appliance before setting up Home Connect. Only then
is internal appliance initialization complete.
Take note of the Home Connect supplementary sheet,
which is supplied with the appliance or is available for
download at www.gaggenau.com together with the
instructions. Enter the E-number of your appliance in
the search field.
You can connect your appliance to the home WLAN
network (Wi-Fi) in 3 basic steps.
1. Install the app.
2. Connect your refrigerator to the home WLAN network
(Wi-Fi).
3. Connect the refrigerator to the Home Connect app.
Home network menu
Here is how to open the Home network menu:
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press button to open the menu item.
4. Press B button to move to the menu item Home
network.
5. Press % button to open the menu item.
Note: The first time you open the menu, you will be
automatically guided through initial setup. Follow the
instructions on the control panel. For further
information, please also see the following chapters.
6. Press B C buttons to select the required submenu.
7. Press ' button to exit the menu.
The following sub-menus can be found in the Home
network menu:
Connection
Connect to app
Software update
Delete network settings
Setting up the connection to the home network
The first time you open the menu, you will be
automatically guided through initial setup. Follow the
instructions on the control panel.
1. Install the Home Connect app on your mobile device.
2. Open the Home network menu on your refrigerator.
3. Open the app on your mobile device.
4. Log in or register with the app if access is not yet
available.
5. Check the router of your home network to see if a
WPS function is available for automatic connection.
6. If this function is available, start automatic network
connection with button.
Follow the instructions on the control panel.
7. Start manual network connection if this function is not
available, if you're not sure whether the function is
available, or if automatic network connection failed.
The refrigerator temporarily generates its own network
for connecting the mobile device.
8. Start manual network connection in the app of your
mobile device.
As soon as the refrigerator is connected to the mobile
device, a connection between the refrigerator and your
home network is established.
Note: If the connection cannot be established, check
whether there is sufficient reception.
~ "Verifying signal strength" on page 19
Verifying signal strength
The signal strength is displayed in the start window of the
Home network menu.The signal strength should be at
least 50 %. If the signal strength is too weak, the
connection may be interrupted.
20
en-us Home Connect
Improving signal strength
Place the router closer to the refrigerator.
Check that screening walls do not interfere with the
connection.
Install a repeater to make the signal stronger.
Connecting the refrigerator to the
Home Connect app
Use this menu to connect your refrigerator to mobile
terminal devices.
1. Install the Home Connect app on your mobile terminal
device and log in or register.
2. Open the Home network menu on your refrigerator.
3. Press C button to move to the menu item Connect to
app.
4. Press % button to open the menu item.
5. Confirm the prompt to display the refrigerator in the
app.
6. Open the app and wait until the refrigerator is
displayed.
Press Add to confirm the connection between the app
and the refrigerator.
If the refrigerator is not automatically displayed, click
on Add appliance in the app and follow the
instructions. As soon as your refrigerator is displayed,
add it with +.
7. Follow the instructions in the app until the process is
complete.
Installing updates for the Home
Connect software
The refrigerator checks at regular intervals whether
updates are available for the Home Connect software.
If an update is available, a little exclamation mark à
appears on the á button.
Installing the update:
1. Press á button.
The special menu Home network note opens.
2. Press button to open the menu item.
A note window with the necessary steps for installing
the new software appears.
3. To close the note window, press button.
4. Open the Home network menu on your refrigerator.
~ "Setting up Home Connect" on page 19
5. Press C button to move to the menu item Software
update.
6. Press % button to open the menu item.
Note: The % button is only visible if an update is
available.
The software is installed.
7. A note appears when installation is complete.
8. Press button to close the note.
Customer Service access
If you contact Customer Service, they can access your
appliance and view its status after you have given your
consent. You need to have your appliance connected to
your home network for this.
Further information about Customer Service access and
its availability in your country is available under
www.home-connect.com in the Help & Support area.
1. Contact Customer Service.
~ "Customer service" on page 27
2. Confirm the start of Customer Service access in the
app.
During Customer Service access the symbol Ù
appears on the control panel.
3. As soon as Customer Service has obtained the
necessary data, they end access.
Note: You can interrupt remote diagnosis early by
switching off Customer Service access in the Home
Connect app.
Deleting network settings
If there is a problem when trying to establish a
connection, or if you would like to register the appliance
in a different home WLAN network (Wi-Fi), the Home
Connect settings can be reset.
1. Open the Home network menu on your refrigerator.
2. Press C button to move to the menu item Delete
network settings.
3. Press % button to open the menu item.
4. Confirm the prompt to delete the network settings.
To then reconnect the appliance to the home WLAN
network (Wi-Fi), perform initial setup again.
~ "Setting up the connection to the home
network" on page 19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82

Gaggenau RC 462 705 Le manuel du propriétaire

Catégorie
Frigos
Taper
Le manuel du propriétaire
Ce manuel convient également à