12
EN
Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select
or cancel auxiliary functions that are suitable to the
running programme by pressing the Start / Pause
/ Cancel button when the machine is operating.
For this, the machine must be in a step before the
auxiliary function you are going to select or cancel.
Dependingontheprogramme,pressa,b,cor
d buttons to select the desired auxiliary function.
Symbol of the selected auxiliary function appears on
the display.
C
Somefunctionscannotbeselectedtogether.Ifa
second auxiliary function conflicting with the first
one is selected before starting the machine, the
function selected first will be canceled and the
second auxiliary function selection will remain
active. For example, if you want to select Quick
Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will
remain active.
C
An auxiliary function that is not compatible
with the programme cannot be selected. (See
"Programme and consumption table")
C
Auxiliary Function buttons may vary according to
the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
F1 appears on the display when you select this
function (a).
• Quick Wash
This function can be used in Cottons and Synthetics
programmes.Itdecreasesthewashingtimesand
also the number of rinsing steps for lightly soiled
laundry.
F2 appears on the display when you select this
function (b).
C
When you select this function, load your
machine with half of the maximum laundry
specified in the programme table.
• Rinse Plus
This function enables the machine to make another
rinsing in addition to the one already made after the
main wash. Thus, the risk for sensitive skins (babies,
allergic skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be reduced.
F3 appears on the display when you select this
function (c).
• Anti-Creasing
This function creases the clothes lesser when they
arebeingwashed.Drummovementisreducedand
spinningspeedislimitedtopreventcreasing.In
addition, washing is done with a higher water level.
F4 appears on the display when you select this
function (d).
• Rinse Hold
Ifyouarenotgoingtounloadyourclothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in the
machine. Press Start / Pause / Cancel button after
this process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
Ifyouwanttospinthelaundryheldinwater,adjust
the Spin Speed and press Start / Pause / Cancel
button.
The programme resumes. Water is drained, laundry
is spun and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better removal
of stains ingrained into the clothes by holding
them in the detergent water prior to startup of the
programme.
• Pet hair removal
This function helps to remove pet hair that remain on
your garments more effectively.
When you select this function, Prewash and Extra
Rinse steps are added to the normal programme.
Thus,washingisperformedwithmorewater(30%)
and the pet hair is removed more effectively.
A
Never wash your pets in the washing machine.
Time display
Remaining time to complete the programme appears
on the display while the programme is running. Tim is
displayed as “01:30” in hours and minutes format.
C
Programme time may differ from the values
in the "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of laundry,
auxiliary functions selected and the changes at
the mains voltage.
Delayed start
WiththeDelayedStartfunctionthestartupofthe
programmemaybedelayedupto24hours.Delayed
starttimecanbeincreasedbyincrementsof30
minutes.
C
Donotuseliquiddetergentswhenyouset
DelayedStart!Thereistheriskofstainingofthe
clothes.
Opentheloadingdoor,placethelaundryandput
detergent, etc. Select the washing programme,
temperature,spinspeedand,ifrequired,theauxiliary
functions. Set the desired delayed start time by
pressingtheDelayedStart+or-buttons.Delayed
Start symbol flashes. Press Start / Pause / Cancel
button.Delayedstartcountdownstarts.Delayed
Start symbol illuminates steadily. Start symbol
appears. “:” sign in the middle of the delayed start
time on the display starts flashing.
C
Additional laundry may be loaded during
the delayed start period. At the end of the
countdown,DelayedStartsymboldisappears,
washing cycle starts and the time of the
selected programme appears on the display.
Changing the delayed start period
Ifyouwanttochangethetimeduringcountdown:
Press Start / Pause / Cancel button. “:” sign in the
middle of the delayed start time on the display stops
flashing.Pausesymbolappears.DelayedStart