L'Or BARISTA SUBLIME LM9012/60 KAPSELMASKIN, SVART Le manuel du propriétaire

Catégorie
Cafetières
Taper
Le manuel du propriétaire
5
4
321
12
8
10 9
7
11
6
14
13
15
English 7
Dansk 24
Deutsch 41
Español 59
Français 77
Italiano 95
Nederlands 113
Norsk 131
Português 148
Svenska 166
English
7
English
General description
1 Ristretto button
2 Espresso button
3 Lungo button
4 Water tank lid
5 Water tank
6 Mains cord with plug
7 Used capsule compartment
8 Waste water drawer
9 Platform for large cups or bowls
10 Drip tray
11 Cup tray
12 Coffee dispensing spout
13 Coffee outlets
14 Capsule compartment
15 Lever
Introduction
Welcome to the L'OR Barista world! L'OR Barista is the only capsule coffee
system that allows you to brew two cups of coffee at the same time thanks
to the double spout and the exclusive L’OR Barista double-shot capsules
with twice as much coffee. The L'OR Barista coffee machine is also
compatible with the L'OR Espresso single-shot coffee capsules. Thanks to
the Dual Capsule Recognition technology, the machine automatically
recognizes the capsule size and adapts the volume accordingly. All you
need to do is press the button for the type of coffee you desire.
Capsules and capsule compatibility
The L'OR Barista coffee machine has been designed to work with L’OR
Espresso single-shot capsules and L’OR Barista double-shot capsules, as
well as with Nespresso* capsules and aluminum capsules from coffee
brands produced by Jacobs Douwe Egberts, such as Douwe Egberts,
JACOBS, Jacqmotte, Jacques Vabre, Grand Mère, L'OR, Marcilla, Moccona,
Saimaza and Senseo.
*brand of a third party not connected to JACOBS DOUWE EGBERTS and / or
PHILIPS
L’OR aluminum capsules are available online at www.lorespresso.com and in
shops. You can choose from a variety of coffee capsules for different types
of coffee.
Direct start and auto switch-off
The direct start function allows you to brew the coffee you desire with just
one press of a button. After the coffee has been prepared the machine
switches off automatically to save energy.
8English
Preparing for use
Before first use, remove all packaging materials from the machine.
When you use the machine for the first time or if you have not used it for 1
day or longer, perform the following steps:
1Remove the water tank from the machine.
2Rinse and fill the water tank under the tap. Place the water tank back
onto the machine.
3Place a bowl under the coffee dispensing spout. Do not insert a capsule
and make sure that the lever is closed.
Note: You can remove the drip tray to create enough space to place a
bowl under the coffee dispensing spout.
4Press the lungo button.
9
English
°C
5The machine heats up in about 25 seconds and starts rinsing. Water flows
from the coffee dispensing spout into the bowl until the internal water
circuit is empty.
Note: When the internal water circuit is empty, the machine produces a
humming sound. When the machine dispenses water, it produces a less
loud humming sound. This is normal.
6Empty the drip tray and the waste water drawer.
The machine is now ready for use.
Brewing coffee
Beverages and capsules
Beverages
Thanks to the Dual Capsule Recognition technology, the machine
automatically recognizes the capsule size and adapts the volume of your
drink accordingly. All you need to do is press the button for the type of
coffee you desire.
25 ml
Ristretto
2x 25 ml
50 ml
Double ristretto / Double shot of ristretto
40 ml
Espresso
10 English
2x 40 ml
80 ml
Double espresso / Double shot of espresso
110 ml
Lungo
2x 110 ml
220 ml
Double lungo / Double shot of lungo
220 ml
Grand Café Filtre
Preparing coffee
1For one coffee, place one cup under the coffee dispensing spout.
11
English
2For two coffees, place two cups under the coffee dispensing spout.
3For a large coffee or Grand Café Filtre, remove the cup platform and the
drip tray, place the cup platform on the lower drip tray and place a large
cup or mug on the cup platform under the coffee dispensing spout.
4Lift the lever.
5Insert a capsule.
-For a single cup of coffee, insert a L'OR Espresso single-shot capsule.
-For two cups of coffee or one large coffee, insert a L'OR Barista
double-shot capsule.
12 English
6Close the lever by pushing it down.
Warning: Do not insert a finger into the brew chamber when
closing the lever to avoid injury. There is an invisible sharp
piercer on the inside of the lever.
7Press the button for the type of coffee you desire. The button lights up
and the machine starts heating up. When the heating-up process is
finished, the machine starts brewing the desired coffee.
Caution: Do not lift the lever until the brewing process has finished.
Brewing is finished when the lights stop flashing and no more coffee
comes out of the coffee dispensing spout.
8After the brewing process has finished, the machine switches off
automatically to save energy.
Brewing Grand Café Filtre
1Remove the seal completely from the capsule.
2Lift the lever and insert the capsule.
3Close the lever.
13
English
4Remove the drip tray with the cup platform. Put the drip tray aside and
place the cup platform on the lower drip tray.
5Place a large cup or mug on the cup platform under the coffee
dispensing spout.
6Press the lungo button to start the brewing process.
Drink personalization: program your drink volume
Each coffee button has been programmed to brew coffee at its ideal setting.
Nevertheless, you can personalize your drink volume to your wishes, within a
range that ensures the best coffee quality.
14 English
Standard
padrão/estandar Min. Max.
Ristretto 25 ml 20 ml 40 ml
Espresso 40 ml 30 ml 50 ml
Lungo 110 ml 50 ml 135 ml
Standard
padrão/estandar Min. Max.
Ristretto 50 ml 40 ml 60 ml
Espresso 80 ml 60 ml 100 ml
Lungo 220 ml 100 ml 270 ml
The volumes for normal and XXL capsules are adjusted separately:
1Fill the water tank.
2Insert a capsule and close the lever.
-If you want to adjust the volume for normal capsules, insert a L'OR
single-shot espresso capsule.
-If you want to adjust the volume for an XXL capsule, insert a L’OR
Barista double-shot capsule.
3Press and hold the button of the coffee whose volume you want to
adjust for 4 seconds until the button flashes quickly. Then release the
button. The machine starts brewing coffee.
4Press the same button again when the cup contains the desired volume.
The button shows a light burst to indicate the new volume is stored.
Note: If you press the coffee button too early, the machine programs the
minimum volume shown in the table above. If you do not press the
coffee button, the machine programs the maximum volume shown in the
table.
Resetting the drink volume
To reset the drink volumes to their factory settings:
1Press and hold the ristretto, espresso and lungo buttons simultaneously
until all buttons flash quickly to show that the machine has been reset to
factory settings.
15
English
Cleaning and maintenance
Cleaning the used capsule drawer and waste water drawer
Check the used capsule compartment and waste water drawer regularly.
Note: For optimal hygiene, pull up the lever after use to ensure the last used
capsule falls into used capsule compartment.
1Pull the waste water drawer and capsule compartment out of the
machine.
2Remove the drip tray.
3Rinse the drip tray and the cup tray under the tap or clean them in the
dishwasher.
4Lift the used capsule compartment off the waste water drawer and
empty it.
Caution: Be careful when you remove the used capsule compartment.
Capsules are still hot immediately after brewing.
16 English
5Rinse the waste water drawer and used capsule container under a tap.
You can also clean all these parts in the dishwasher.
6After cleaning, place the used capsule compartment on the waste water
drawer.
7Slide the waste water drawer with the used capsule container into the
machine.
8Place the drip tray back onto the lower drip tray. Place the cup tray on
the drip tray.
Cleaning other parts of the machine
1Clean the outside of the machine with a soft damp cloth.
Caution: Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the machine.
Warning: Do not insert a finger into the capsule compartment
to avoid injury. There is an invisible piercer on the inside of the
lever.
2Clean the water tank by rinsing it under a warm tap.
Note: The water tank is not dishwasher-proof.
Note: Rinse the water tank and fill it with fresh water every 24 hours.
3Pull the coffee dispensing spout off the machine.
4Rinse coffee dispensing spout under a warm tap.
17
English
5To clean the coffee dispensing spout thoroughly, open the cover.
6Rinse the coffee dispensing spout under a warm tap. You can also clean
it in the dishwasher
Cleaning the coffee circuit
Clean the coffee circuit every week to ensure you get coffee with an
optimum quality and taste.
1Place a cup under the coffee dispensing spout.
2Lift the lever to ensure the last used capsule falls into the used capsule
compartment.
3Do not insert a new capsule and close the lever.
18 English
4Press the lungo button.
5Empty the cup after the machine has finished dispensing water.
6Open the lever and repeat steps 3 to 5 to ensure proper cleaning of the
coffee circuit.
7Empty the waste water drawer.
The machine is now ready for use.
Descaling
When to descale
-Descale the machine when the ristretto and lungo button flash quickly a
few times after brewing. The descaling procedure takes up to 40 minutes
and consists of a descaling cycle and a rinsing cycle. Do not interrupt the
descaling procedure.
Why to descale
Descaling is essential for the following reasons:
-It prolongs the life of your L'OR Barista coffee machine
-It ensures maximum cup volume
-It ensures maximum coffee temperature
-The machine produces less sound during brewing
-It prevents malfunctioning
If the descaling procedure is not performed correctly, scale residue remains
behind in the machine. This causes scale to build up more quickly and may
cause permanent and irreparable damage to the machine.
Use the correct descaler
Only citric acid-based descalers are suitable for descaling the L'OR Barista
machine. This type of descaler descales the machine without damaging it.
19
English
We advise you to use the dedicated L'OR Barista liquid descaler (CA6530). It
is available in bottles that contain liquid descaler for two descaling
procedures. You need half a bottle for one descaling procedure and can
store the other half for the next descaling procedure.
Descaling procedure
Note: If something goes wrong during the descaling procedure, e.g. because
you accidentally interrupt the descaling cycle, you have to restart the
descaling procedure from step 1.
1Pour half a bottle of L'OR Barista liquid descaler (CA6530) into the water
tank.
2Fill up the water tank with fresh tap water.
3Make sure that there is no capsule in the capsule compartment.
4Close the lever.
20 English
1.5 L
5Place a bowl with a minimum capacity of 1.5 liters on the lower drip tray
under the coffee dispensing spout to collect the descaling solution.
3 sec.
6Press and hold the ristretto and lungo button for 3 seconds at the same
time. The ristretto button starts to flash and the lungo button is steady on
30 min
7The machine dispenses the entire descaling solution at regular intervals.
This takes up to 30 minutes.
-When the lungo button start to flash quickly and the ristretto button is
on, the first phase of the descaling cycle has finished
8Remove and empty the bowl. Place the bowl back onto the lower drip
tray under the coffee dispensing spout.
9Remove the water tank and rinse it under the tap. Fill the water tank with
cold tap water and place it back onto the machine.
21
English
10 Press the flashing button to start the flushing cycle. The ristretto button is
on and the lungo button flashes during the flushing phase
Note: The water tank will be emptied without interruption. The flushing
cycle lasts about 3 minutes.
11 When the flushing cycle has finished, the ristretto and lungo button flash
a few times.
Note: It is normal that some water remains behind in the water tank after
the descaling procedure.
The machine switches off. The descaling procedure is finished.
Meaning of light signals
-The selected coffee button flashes slowly: the machine is preparing your
drink.
-The selected coffee button flashes quickly: the water tank is empty, fill
the water tank with tap water.
-The selected coffee button flashes intermittently: The new coffee
quantity is saved and programming is active.
-The ristretto and lungo button flash simultaneously after brewing coffee:
you need to descale the machine.
-All three buttons flash simultaneously: the machine needs to cool down.
Wait approx. 2 minutes before you start brewing a new drink.
Troubleshooting
This chapter summarizes the most common problems you could encounter
with your machine. If you are unable to solve the problem with the
information below, visit www.lorbarista.com/support for a list of frequently
asked questions or contact the Consumer Care Center in your country.
Problem Possible cause Solution
The machine does not switch
on.
The machine is not connected to
the mains.
Put the plug in an earthed wall
socket.
The coffee does not flow out
of the machine immediately
when I press the button.
The machine needs a few seconds
to heat up before it starts brewing.
This is normal.
The brewing time is longer
than before.
The machine is clogging up with
scale.
Descale the machine.
22 English
Problem Possible cause Solution
The temperature of freshly
brewed coffee gradually
decreases.
The machine is clogging up with
scale.
Descale the machine.
The pump makes a lot of
noise.
There is not enough water in the
water tank.
Fill the water tank with fresh tap
water.
The water tank is not placed
correctly.
Place the water tank correctly
and push it downwards.
The machine suddenly stops
brewing coffee.
There is not enough water in the
water tank.
Fill the water tank with fresh tap
water. Press the button of the
selected type of coffee again to
continue brewing. When the cup
is full, press the same button
again to stop the brewing
process.
The selected coffee button
flashes quickly.
The water tank is empty. Fill the water tank with fresh tap
water. Press the button of the
selected type of coffee again to
continue brewing. When the cup
is full, press the same button
again to stop the brewing
process.
I cannot close the capsule
compartment lever
completely.
Check if you use the
recommended L'OR capsule. Other
capsules may cause problems
during use.
The used capsule drawer is full. Empty the used capsule drawer
and insert the capsule again.
The capsule is not inserted
correctly.
Insert the capsule again and
check if it is inserted correctly.
The capsule is stuck. Open and close the lever a few
times with moderate force to
remove the capsule.
The lever does not open
completely.
The used capsule drawer is full. Empty the used capsule drawer.
The machine does not
dispense coffee or only
dispenses drops of coffee.
You have not flushed the machine
before first use.
Flush the machine before first
use (see 'Preparing for use').
There is not enough water in the
water tank.
Fill the water tank with fresh tap
water.
Scale has built up inside the
machine (see 'Descaling').
Descale the machine (see
'Descaling').
23
English
Problem Possible cause Solution
Coffee grounds end up in the
cup of coffee.
A small amount of ground coffee
will always end up on the bottom
of the cup.
This is normal.
The coffee flow splits or is not
straight.
The coffee dispensing spout cap is
not placed correctly or it is missing.
Snap the coffee dispensing
spout onto the coffee outlets.
The ristretto and lungo button
lights are flashing after
brewing.
This means it is time to descale the
machine to prevent it from
clogging with scale.
Descale the machine (see
'Descaling').
Why do I find water in the
waste water drawer?
The used capsule drawer and
waste water drawer catch the
residual water released after
brewing coffee.
This is normal. Empty the capsule
and waste water drawer
frequently
The coffee volume is not what
I expected.
The coffee volume has been
adjusted.
Readjust the coffee volume (see
'Drink personalization: program
your drink volume ') or reset the
coffee volume (see 'Resetting the
drink volume').
My coffee is less warm. When you brew the first cup of the
day or when it has been a while
since your previous cup of coffee,
the inside of the machine is still
cold when you brew coffee.
You can pre-heat the machine
and coffee cup by brewing a cup
of coffee first without placing a
coffee capsule.
If you use a cold, thick-walled cup,
the coffee will cool down
immediately.
Use thin-walled cups, as thin-
walled cups will absorb less heat
from the coffee than thick-
walled cups. Make sure the size
of the cup matches the coffee
quantity. Do not brew a small
quantity of coffee in a large cup.
The machine is clogged with scale. Descale the machine when the
ristretto and lungo button flash
quickly a few times after brewing
(see 'Descaling').
You used cold milk. If you drink coffee with cold,
fresh milk, this will cool down
your coffee. You can prevent this
by preheating the milk.
The machine switches off
after each brewing cycle.
This is the automatic shut-off
function.
To save energy, the machine
switches off automatically after
each brewing cycle.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180

L'Or BARISTA SUBLIME LM9012/60 KAPSELMASKIN, SVART Le manuel du propriétaire

Catégorie
Cafetières
Taper
Le manuel du propriétaire