La page est en cours de chargement...
RB275GM1110
RP282BSF0
Warning: Under the climate types N, ST and T, the operating ambient range of the
appliance is 16℃~43℃. If the appliance operates outside the rated climate type (ambient
temperature range), the appliance may not maintain the satisfying interior temperature.
Safety instructions
3
The pictures are for reference only. Please refer to the object
5
lamp
Refrigerating door balcony
Multi-airflow
Lock
Simple
simple
EC O
simple
EC O
and hold the“Regulate”key for 3s
e"Regulate"key repeatedly.
ff
In the unlocked state, press the"Regulate"key repeatedly until the "power cool" icon flashes,
Simple
In the unlocked state,press the"Regulate"key repeatedly until the"simple"icon flashes,
In the unlocked state,press the"Regulate"key repeatedly until the"ECO"
room temperature 6℃ under"ECO"function.
The
Power cool function
Operation notes
Before reversing the door, please prepare the following tools: cross screw driver, wrench. Note:
please remove the main plug before reversing the door. Two people may be needed.
1.Close the door, take out the screw from the upper hinge cover with a cross screw driver, remove
the hinge cover, and then disassemble the connection terminal, screw off the top hinge, and take
down the door. Remove the screw cover on the left.
2.Take out the screws of the middle hinge with a cross screwdriver, remove the middle hinge,
remove the screw cover at the left screw hole, and take down the lower door.
3.Laying down the refrigerator, and remove the lower hinge and leveling angle at the bottom of the
refrigerator.
4.Remove the wire cover of the upper upper door cover, change the wiring harness from the right
side to the left side, install the wire cover of the upper end cover, and change the upper door and
lower door stop to the left side. (the replacement of upper door and lower door stop is the same as
that of lower door, and the lower left figure will be changed to right picture)
5.Disas
semble the lower hinge assembly, and then install the leveling foot and screw nut (as
shown in the right figure).
6.Replace the lower hinge assembly with the leveling angle, and install the lower door.
7.Install the middle hinge at the left mounting position, and install the previously removed screw
cover to the right screw hole.
8.Install the door, connect the terminals, install the upper hinge, the upper hinge cover and the
previously removed screw cover. Reverse door complete. (the upper hinge and hinge cover are
installed on the left as shown in the figure, and the screw cover is in the right position)
9.After the operation is completed, please stand still for a period of time and turn on the power.
Operation notes
Changing the Light
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualified person.
1.5W
RB275GM1110
Weight
Dimension
545x615x1825
55
282
80L
54
0.7A
RB275GM1110
41dB
5
Energy consumption E16
Energy consumption E32
0.513kWh/24h
1.059kWh/24h
1.5W
545x615x1825
55
282
80L
54
0.7A
41dB
0.513kWh/24h
RP282BSF0
1.059kWh/24h
RP282BSF0
RB275GM1110
RP282BSF0
■ Veuillez lire attentivement le mode d’emploi avant la mise en marche, et conservez-le bien.
■ Les produits peuvent être sujets à modification sans préavis.
Réfrigérateur domestique à 2 portes
Mode d’emploi
TCL Home Appliances (Hefei) Co., Ltd.
Adresse: 10 rue Yunhu, zone de développement économique,
ville de Hefei, province d’Anhui, Chine
FR
FR
/