Yamaha TW-E3A Mode d'emploi

Taper
Mode d'emploi
Truly Wireless Earphones
User Guide
EN
Contents
Notice 4
About this Documentation.. ....................................................................... 4
Trademarks.. ............................................................................................................................................................................4
Handling this product................................................................................6
Waterproof performance.. .......................................................................................................................................................6
Battery-related notes...............................................................................................................................................................7
Product Overview 8
Advantages of this product.. ...................................................................... 8
Accessories..............................................................................................9
Part names.............................................................................................11
Part names (charging case).......................................................................12
Charging and Powering 13
Charging the earphones.. .........................................................................13
Charging the charging case.......................................................................14
Turning the power on...............................................................................15
Turning the power off..............................................................................16
Checking the remaining battery power.......................................................17
Connections 18
Registering a Bluetooth device (pairing).....................................................18
Registering (pairing) a different Bluetooth device........................................20
Connecting to a Bluetooth device.. ............................................................ 23
Disconnecting from a Bluetooth device.......................................................24
Wearing this product 25
Putting the earphones on......................................................................... 25
Replacing the eartips...............................................................................26
Replacing the silicone sleeves...................................................................27
2
Contents
Operating this Product 28
Adjusting the volume...............................................................................28
Listening to music................................................................................... 29
Receiving a phone call..............................................................................30
Using the voice assistance feature on your smartphone................................31
Settings 32
About the app for earphones/headphones...................................................32
List of settings (main screen).................................................................... 33
List of product settings (menu).. ............................................................... 34
Automatically adjust the sound quality according to the volume....................35
Setting the auto-standby time.. ................................................................ 36
Updating the firmware.............................................................................37
Troubleshooting 38
Read this first.........................................................................................38
No sound can be heard............................................................................. 39
Sound can only be heard from one earphone...............................................40
Power will not turn on.. ........................................................................... 41
The product cannot be charged.................................................................42
Cannot connect to a Bluetooth device.. ...................................................... 43
The product does not operate or play back..................................................44
The sound is distorted, noisy or choppy......................................................45
Restoring this product to factory defaults (Initialize / Reset).........................46
Problem Still Not Resolved (Customer Support).. ........................................ 50
Appendix 51
Specifications.........................................................................................51
List of operations.................................................................................... 52
List of indicator displays and audio messages..............................................54
3
Contents
Notice
About this Documentation
Trademarks
The trademarks used in this documentation are as follows.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their
respective owners.
Qualcomm aptX is product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark registered by Qualcomm Incorporated in the U.S.A. and other countries. aptX is a trademark
registered by Qualcomm Technologies International, Ltd. in the U.S.A. and other countries.
Android™ and Google Play™
Android and Google Play are trademarks of Google LLC.
App Store
SM
The App Store is a service mark of Apple Inc.
Siri
®
Siri is a trademark registered by Apple Inc. in the U.S.A. and other countries.
4
Notice > About this Documentation
Notice regarding the contents of this documentation
(
This documentation is a user’s guide intended for the following readers.
(
Those who will use this product
(
This documentation classifies precautions and other matters as follows.
(
WARNING
This content indicates “risk of serious injury or death.”
(
CAUTION
This content indicates “risk of injury.”
(
NOTICE
Indicates points that you must observe in order to prevent product failure, damage or malfunction and
data loss, as well as to protect the environment.
(
NOTE
Indicates notes on instructions, restrictions on functions, and additional information that may be
helpful.
(
All illustrations and screens shown in this documentation are for explanatory purposes.
(
All company names, product names and other such listings in this documentation are the registered
trademarks or trademarks of their respective companies.
(
Software may be revised and updated without prior notice.
5
Notice > About this Documentation
Handling this product
Waterproof performance
The waterproof performance of the body of these earphones is compliant with IPX5 standards. However, the
charging case is not waterproof.
Product failures caused by water ingress due to incorrect handling are not covered by the warranty. Use
caution regarding the following to avoid electric shock or product failure.
About IPX
(
IPX refers to a product's “liquid ingress protection” as cited in JIS C 0920 (the harmonized standard of IEC 60529), “Degrees of
protection provided by enclosures (IP Code)”.
(
These are provisions that guarantee the performance of a product in fresh water or tap water at room temperature. This does
not guarantee equivalent performance in warm water, seawater or the like.
(
Earphones
(
The waterproof performance of the body of these earphones is compliant with IPX5 standards. The
earphones are protected by direct jets of water from all directions.
(
Charging case
The charging case and the included USB power cable are not waterproof. Use caution regarding the
following.
(
Thoroughly wipe off any moisture that gets on the earphones before placing them back in the charging
case.
(
Do not handle the charging case with wet hands.
(
Do not use these earphones where there is a lot of moisture or where they are exposed to water, such as
in the bath/shower or outdoors when it is raining.
6
Notice > Handling this product
Battery-related notes
The lithium-ion battery contained in this product is a consumable item. To extend the life of the battery as
long as possible, use caution regarding the following.
(
If the product is not used for a long period of time, the charging time may get longer.
(
When storing the product for a long time, charge the product around once every six months to avoid
excessive discharge.
7
Notice > Handling this product
Product Overview
Advantages of this product
This product is a set of wireless earphones that connect to Bluetooth devices such as a portable music player
or smartphone.
High-definition playback of sound from Bluetooth devices
This product supports the Qualcomm aptX™ and AAC codecs.
Supports Qualcomm TrueWireless™ Stereo Plus (TWS+)
This product supports TrueWireless Stereo Plus-compatible Bluetooth devices, offering more stable
connectivity.
LISTENING CARE feature
This product features LISTENING CARE, which lets you enjoy rich sound quality even at low volumes.
Focusing on the characteristics of the human ear where the low- and high-end sounds become harder to
hear at lower volumes, as well as how things sound differently in different listening environments, this
feature corrects the sound balance for the optimal sound to match the volume. By rendering a natural sound
that's easy to listen to, this feature reduces the load on your ears caused by excessive levels.
Smartphone feature support
You can use this product to talk on the phone and start up the voice assistant while connected to this
product.
Dedicated smartphone app: Headphones Controller
Use the Headphones Controller app to configure more detailed settings.
Related links
(
“About the app for earphones/headphones”(p.32)
(
“Automatically adjust the sound quality according to the volume”(p.35)
8
Product Overview > Advantages of this product
Accessories
Make sure that all of the accessories are included with this product.
Earphones (main units)
Charging case
USB power cable (30 cm; type C to A)
Eartips (L, M, S, SS; one set each)
L M
(already attached
to the earphones)
S SS
Silicone sleeves (M, S; one set each)
S
(already attached to
the earphones)
M
Quick Start Guide
9
Product Overview > Accessories
User Guide (Basic)
Safety Brochure
10
Product Overview > Accessories
Part names
Below is an explanation of the parts of the earphones.
b
a
a
Function key (L, R)
b
Indicator
NOTE
The earphones use built-in microphones to capture ambient sounds and conversations.
11
Product Overview > Part names
Part names (charging case)
Below is explanation of the parts of the charging case.
a
b
a
Charging connector
Plug the USB power cable into the connector for charging.
b
Indicator
NOTE
The charging case contains a battery for charging the earphones.
12
Product Overview > Part names (charging case)
Charging and Powering
Charging the earphones
Charge the earphones before use.
NOTICE
(
The charging case is not waterproof. Thoroughly wipe off any moisture that gets on the earphones before placing them back in
the charging case.
Orange
Back
1 Open the charging case lid.
2 Place the earphones in the charging case.
3 Close the charging case lid.
The charging case indicator lights up when charging, and turns off when charging is completed.
NOTE
When the remaining battery power of the charging case is completely depleted while charging the earphones, the earphones will turn
on.
13
Charging and Powering > Charging the earphones
Charging the charging case
Charge the charging case.
Make sure to use the USB power cable that was included with this product. Also, when using a USB power
adaptor, be sure that the adaptor is compatible with 5 V DC (at least 0.5 A) commercially available power
output.
1
2
3
Orange
1 Plug the USB power cable into the charging case.
2 Plug the USB power cable into the USB power adaptor.
3 Plug the USB power adaptor into the power outlet.
Charging will begin.
While the case is charging, the indicator flashes as shown below according to the charging status.
(
Flashes three times: plenty of charge remaining
(
Flashes two times: moderate charge remaining
(
Flashes one time: small amount of charge remaining
When charging is completed, the indicator light will turn off.
NOTE
(
You can also charge the earphones while the charging case is charging. In this case, the indicator on the charging case will turn off.
(
You may not be able to charge if you use a USB power cable other than the one included with this product.
(
You may charge from the USB port on your computer instead of using a USB power adaptor.
(
This product’s power will turn off during charging. You will not be able to operate or play music at this time.
NOTICE
(
When charging this product inside of China, be sure to use a USB power adaptor that is approved by CCC.
14
Charging and Powering > Charging the charging case
Turning the power on
Turn the power on.
1 Remove the earphones from the charging case.
The indicator lights up as shown below, and the power turns on.
NOTE
If the earphones have been removed from the charging case or if they do not turn on when removed from the charging case, hold
down the function key on each earphone (L, R) until their indicators light up blue.
2 sec
Blue
1 sec
Related links
“Checking the remaining battery power”(p.17)
15
Charging and Powering > Turning the power on
Turning the power off
Turn the power of this product off.
1 Place the earphones in the charging case.
The earphone power will turn off, and the product will enter charging mode.
NOTE
(
If the earphones have been removed from the charging case, hold down the function key on each earphone (L, R) until their
indicators light up red. You will hear the “Power Off” audio message in the earphones.
5 sec
Red
1 sec
(
When the remaining battery power is low, the indicator will flash red three times when the power is turned on. If this happens,
charge this product.
(
When the remaining battery power of the charging case is depleted, the earphones will not turn off even when they are placed in
the charging case. If this happens, use the function keys on each earphone to turn them off.
16
Charging and Powering > Turning the power off
Checking the remaining battery power
After this product are turned on, you can check how much battery power is left from the flashing indicator
and the audio message.
(
Audio messages:
(
Battery High: plenty of charge remaining
(
Battery Medium: moderate charge remaining
(
Battery Low: small amount of charge remaining
(
Indicator (on earphone):
(
Flashes three times (red): small amount of charge remaining
17
Charging and Powering > Checking the remaining battery power
Connections
Registering a Bluetooth device (pairing)
When first connecting this product to a Bluetooth device, follow the steps below to register (pair) this
product with that device.
1 Set this product to pairing mode.
First, remove the earphone (R) and wait until the LEDs are lit as shown in the illustration
below. Next, remove the earphone (L). The earphone (R) will enter pairing standby mode.
Blue
20 sec
Red Blue
Flashes alternately
NOTE
If both earphones are alternately flashing red/blue, they cannot be successfully registered (paired). Place both earphones
back into the charging case and take them out again.
2 Activate the Bluetooth function on the Bluetooth device.
A list of Bluetooth devices that can be connected will be shown.
18
Connections > Registering a Bluetooth device (pairing)
3 Select this product from this list on your Bluetooth device.
If successfully connected, you will hear the “Pairing Successful” audio message.
The indicator on the earphone will light up as shown below.
Blue
20 sec
Next, you will see a message to register (pair) the other earphone. Follow the instructions to
register (pair).
The other earphone may be listed as “Headset,” depending on the Bluetooth device.
NOTE
(
Pairing standby mode will automatically end after about two minutes. To register again, start from step 1.
(
Up to 3 devices can be registered with this product. From the 4th device on, older registrations will be deleted (the oldest is deleted
first).
(
If a passkey is required when connecting, input “0000”.
(
You can also set the earphones in registration (pairing) mode by disconnecting the earphones with the connected Bluetooth
device.
Related links
(
“Registering (pairing) a different Bluetooth device”(p.20)
(
“Connecting to a Bluetooth device”(p.23)
(
“Disconnecting from a Bluetooth device”(p.24)
(
“About the app for earphones/headphones”(p.32)
19
Connections > Registering a Bluetooth device (pairing)
Registering (pairing) a different Bluetooth device
Follow the steps below to register (pair) another Bluetooth device. [q01]
1 Keep pressing the function key on each earphone (L, R) until their indicators light
up red.
The power will turn off.
5 sec
Red
1 sec
2 Keep pressing the function key on the earphone (R) until its indicator lights up as
shown below.
You will hear the “Pairing” audio message in the earphone, and the earphone will enter
registration (pairing) standby mode.
5 sec
Blue Red
Flashes alternately
20
Connections > Registering (pairing) a different Bluetooth device
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Yamaha TW-E3A Mode d'emploi

Taper
Mode d'emploi