Aastra 6730I Manuel utilisateur

!

1!

Aastra 6730i

Thank you for purchasing Astra 6730i.

Package Contents:

• Aastra 6730i Body

• Handset

• Handset Cord

• Power Adapter

• Ethernet Cable

• Installation Guide CD

• User Manual

Disclaimer

• Product functions and specifications are subject to change without prior notice.

• Quality of call (e.g. choppy line, noise, etc.) may be affected by company’s network

environment.

• Our company does not assume any responsibilities for a difference in call quality due

to personal hearing impairment.

• Our company is not responsible for service that may not be available outside the

country.

• Aastra 6730i may temporarily suspend the service for routine maintenance without

prior notice.

• We would not assume any liability for product failure due to device (phone)

malfunction.

!

2!

Aastra 6730i Phone Keys

Phone Features

• 3-line LCD Screen

• Built-in-two-port, 10/100 Ethernet switch – lets you share a connection with your

computer

• 8 programmable top keys

• Press-and-hold speed dial key configuration feature

• Support up to 6 call lines with LEDs

• Full-duplex speakerphone for hands free calls

• Handset mode support (via handset jack)

• AC power adapter (included)

!

3!

Installation

1. Direct Network Connection: The port marked with [LAN] is used to connect the phone to

the network.

2. Power Adapter: Use the power adapter (provided) with your phone and plug your phone

into a power source.

* For power, use the 5V AC Power Adapter (limited power source (LPS) power supply,

input rated 100-240Vac. 50-60Hz, 0.3A. Output rated 5Vdc, 2A min, included only in a

specific Aastra ordering SKUs) to connect from the DC power port on the phone to a

power source.

3. Connecting a Handset: Turn the phone over and locate the handset jack. Insert one end

of handset cord into the jack until it clicks into place. Then route the handset cord through

the groove as shown in the illustration below. Attach the handset to the other end of the

handset cord.

!

4!

Setting up

* Ensure that the phone is powered-up and connected to the internet.

1. Verify the device’s IP address.

Press [Option Key] to display the Menu ! Use the [Up or Down Arrow Key] to select

[Phone Status] ! Press [Enter] to display [IP and MAC Addresses]

2. Open Settings Page on Web browser.

Aastra 6730i and PC’s network connection should be the same. Type the IP address on the

Web browser field on a local PC. [Format: http://IPAddress ! Example: Phone IP address

(192.168.001.002) ! Type (http://192.168.1.2)]

3. Enter Username and password: Default Username: [admin] Default Password: [22222].

4. On the [Advanced Settings], select [Line 1].

Screen Name: Enter [Extension Number].

Phone Number and Authenticate Name: Enter [Unique ID].

Caller ID: Enter [Phone Number].

Password: Enter registered [Password]. If you changed your password, enter your new

password.

admin

22222

Extension Number

Unique ID

Phone Number

Unique ID

Password

!

5!

VoIP Server

5060

VoIP Server

5060

VoIP Server

5060

Proxy Server, Outbound Proxy

Server and Registrar Server:

Enter [VoIP Server].

Proxy Port, Outbound Proxy Port

and Registrar Port: Enter [5060].

* Click [Save Settings] to save

changes and current

configurations.

NTP Time Servers:

Check [Enabled].

Time Server 1, 2, 3:

Enter

[ntp.jst.mfeed.ad.jp].

* Click [Save Settings] to

save changes and

current configurations.

!

6!

5. Other Settings: Press [Option] key on the device and use [Up / Down Arrow] key to

navigate ! Select [2 Preferences] ! [6 Time and Date] ! [1 Time Zone] ! Select

[Country Code] Example: [JP] ! Tokyo ! [Set].

6. Setting Programmable Keys: On the [Operation] options, select [Programmable

Keys].

On the [Dropdown Box/Options], select [Speed Dial] ! on the value field, type [*8] and

[#9].

* Click [Save Settings] to save changes and current configurations.

!

7!

Precautions & Safety Instructions

The following instructions help use Aastra 6730i properly and prevent

accidents. Failure to follow these instructions would void the product’s

warranty and accident may happen.

• Immediately unplug the device from the power supply if there is a strange

smell and smoke. Don’t use the device and immediately contact the dealer

for repair. Do not disassemble or modify. The device may malfunction,

cause electric shock and fire.

• Do not insert metal and keep the device dry. The device may malfunction,

cause electric shock and fire.

• Do not touch the device when lightning occurs. Doing so may cause an

electrical shock. Don’t place near a flammable material. This may cause

fire or explosion.

• Holding the phone on wet hands may cause electric shock. Don’t place the

device in an extreme hot or cold place. Sudden temperature change may

cause malfunction of the device.

• Do not place in a damp, dusty or direct sunlight. This may trigger an

explosion of the device. Place in an even and stable location.

• Do not place the phone and earpiece near an absorbent and magnet

material. This may cause malfunction.

Troubleshooting

Please check the troubleshooting procedure before requesting a repair. If the

problem doesn’t get resolved, please contact us. Agile Shop ([email protected])

Initialization Method

Clear all data initialization process. You must set all the required information to

start initializing your service again.

1. Note the (000B82000xxxx) MAC address located at the bottom of the unit.

2. Press the [MENU] button and select [Config]. Then, select [Factory Reset]

and confirm by selecting [OK].

!

8!

PROBLEM

CAUSE

SOLUTION

General Failure

Plug and unplug from the power source. (Do this a few times).

Wait at least one minute before you again plug the device to

the power source.

If the problem is not resolved after doing this, contact us at:

sup@agile.ne.jp

Please provide your number and broadband products.

No ringer sound

Ethernet cable is

disconnected.

AC adapter is

disconnected.

Did you change

the volume

settings?

Did you change the settings

on the display?

Check the connection of the

Ethernet cable.

Check the connection of the

AC adapter.

Adjust the volume on the

volume button.

Revert the changed settings.

Disconnect the Ethernet cable

(Please reboot).

Call is interrupted

by noise

Are there any abnormalities in

the network environment?

Check your network

environment.

Reference: http://www.manualslib.com/manual/552/Aastra-6730i.html#manual

http://www.aastra.com/document-library.htm?curr_nav=2&curr_fam=Aastra+6730i&prod_id=6167

Please check our website for FAQ.

For more information on features

and settings, please check

http://www.agile.ne.jp/support /

Inquiries by telephone and email:

Send to: sup@agile.ne.jp

Telephone number: 03-6365-1506

Weekdays: 10:00 - 19:00

For Inquiries upon product purchase:

Send to: shop@agile.ne.jp

Aastra 6730I Manuel utilisateur

Aastra 6730I Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents