Aastra 6730I Manuel utilisateur

6730I
Aastra
Marque
Aastra
Modèle
6730I
Catégorie
Téléphones
Taper
Manuel utilisateur
!
1!
Aastra 6730i
Thank you for purchasing Astra 6730i.
Package Contents:
• Aastra 6730i Body
• Handset
• Handset Cord
• Power Adapter
• Ethernet Cable
• Installation Guide CD
• User Manual
Disclaimer
• Product functions and specifications are subject to change without prior notice.
• Quality of call (e.g. choppy line, noise, etc.) may be affected by company’s network
environment.
• Our company does not assume any responsibilities for a difference in call quality due
to personal hearing impairment.
• Our company is not responsible for service that may not be available outside the
country.
• Aastra 6730i may temporarily suspend the service for routine maintenance without
prior notice.
• We would not assume any liability for product failure due to device (phone)
malfunction.
!
2!
Aastra 6730i Phone Keys
Phone Features
• 3-line LCD Screen
• Built-in-two-port, 10/100 Ethernet switch – lets you share a connection with your
computer
• 8 programmable top keys
• Press-and-hold speed dial key configuration feature
• Support up to 6 call lines with LEDs
• Full-duplex speakerphone for hands free calls
• Handset mode support (via handset jack)
• AC power adapter (included)
!
3!
Installation
1. Direct Network Connection: The port marked with [LAN] is used to connect the phone to
the network.
2. Power Adapter: Use the power adapter (provided) with your phone and plug your phone
into a power source.
* For power, use the 5V AC Power Adapter (limited power source (LPS) power supply,
input rated 100-240Vac. 50-60Hz, 0.3A. Output rated 5Vdc, 2A min, included only in a
specific Aastra ordering SKUs) to connect from the DC power port on the phone to a
power source.
3. Connecting a Handset: Turn the phone over and locate the handset jack. Insert one end
of handset cord into the jack until it clicks into place. Then route the handset cord through
the groove as shown in the illustration below. Attach the handset to the other end of the
handset cord.
!
4!
Setting up
* Ensure that the phone is powered-up and connected to the internet.
1. Verify the device’s IP address.
Press [Option Key] to display the Menu ! Use the [Up or Down Arrow Key] to select
[Phone Status] ! Press [Enter] to display [IP and MAC Addresses]
2. Open Settings Page on Web browser.
Aastra 6730i and PC’s network connection should be the same. Type the IP address on the
Web browser field on a local PC. [Format: http://IPAddress ! Example: Phone IP address
(192.168.001.002) ! Type (http://192.168.1.2)]
3. Enter Username and password: Default Username: [admin] Default Password: [22222].
4. On the [Advanced Settings], select [Line 1].
Screen Name: Enter [Extension Number].
Phone Number and Authenticate Name: Enter [Unique ID].
Caller ID: Enter [Phone Number].
Password: Enter registered [Password]. If you changed your password, enter your new
password.
admin
22222
Extension Number
Unique ID
Phone Number
Unique ID
Password
!
5!
VoIP Server
5060
VoIP Server
5060
VoIP Server
5060
Proxy Server, Outbound Proxy
Server and Registrar Server:
Enter [VoIP Server].
Proxy Port, Outbound Proxy Port
and Registrar Port: Enter [5060].
* Click [Save Settings] to save
changes and current
configurations.
NTP Time Servers:
Check [Enabled].
Time Server 1, 2, 3:
Enter
[ntp.jst.mfeed.ad.jp].
* Click [Save Settings] to
save changes and
current configurations.
!
6!
5. Other Settings: Press [Option] key on the device and use [Up / Down Arrow] key to
navigate ! Select [2 Preferences] ! [6 Time and Date] ! [1 Time Zone] ! Select
[Country Code] Example: [JP] ! Tokyo ! [Set].
6. Setting Programmable Keys: On the [Operation] options, select [Programmable
Keys].
On the [Dropdown Box/Options], select [Speed Dial] ! on the value field, type [*8] and
[#9].
* Click [Save Settings] to save changes and current configurations.
!
7!
Precautions & Safety Instructions
The following instructions help use Aastra 6730i properly and prevent
accidents. Failure to follow these instructions would void the product’s
warranty and accident may happen.
• Immediately unplug the device from the power supply if there is a strange
smell and smoke. Don’t use the device and immediately contact the dealer
for repair. Do not disassemble or modify. The device may malfunction,
cause electric shock and fire.
• Do not insert metal and keep the device dry. The device may malfunction,
cause electric shock and fire.
• Do not touch the device when lightning occurs. Doing so may cause an
electrical shock. Don’t place near a flammable material. This may cause
fire or explosion.
• Holding the phone on wet hands may cause electric shock. Don’t place the
device in an extreme hot or cold place. Sudden temperature change may
cause malfunction of the device.
• Do not place in a damp, dusty or direct sunlight. This may trigger an
explosion of the device. Place in an even and stable location.
• Do not place the phone and earpiece near an absorbent and magnet
material. This may cause malfunction.
Troubleshooting
Please check the troubleshooting procedure before requesting a repair. If the
problem doesn’t get resolved, please contact us. Agile Shop ([email protected])
Initialization Method
Clear all data initialization process. You must set all the required information to
start initializing your service again.
1. Note the (000B82000xxxx) MAC address located at the bottom of the unit.
2. Press the [MENU] button and select [Config]. Then, select [Factory Reset]
and confirm by selecting [OK].
!
8!
PROBLEM
CAUSE
General Failure
Plug and unplug from the power source. (Do this a few times).
Wait at least one minute before you again plug the device to
the power source.
If the problem is not resolved after doing this, contact us at:
sup@agile.ne.jp
Please provide your number and broadband products.
No ringer sound
Ethernet cable is
disconnected.
AC adapter is
disconnected.
Did you change
the volume
settings?
Did you change the settings
on the display?
Call is interrupted
by noise
Are there any abnormalities in
the network environment?
Reference: http://www.manualslib.com/manual/552/Aastra-6730i.html#manual
http://www.aastra.com/document-library.htm?curr_nav=2&curr_fam=Aastra+6730i&prod_id=6167
Please check our website for FAQ.
For more information on features
and settings, please check
http://www.agile.ne.jp/support /
Inquiries by telephone and email:
Send to: sup@agile.ne.jp
Telephone number: 03-6365-1506
Weekdays: 10:00 - 19:00
For Inquiries upon product purchase:
Send to: shop@agile.ne.jp
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Aastra 6730I Manuel utilisateur

6730I
Aastra
Marque
Aastra
Modèle
6730I
Catégorie
Téléphones
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents