Sony MDX-CA790X Manuel utilisateur

Marque: Sony

Modèle: MDX-CA790X

Catégorie: Récepteurs multimédia de voiture

Taper: Manuel utilisateur

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

FM/MW/LW MiniDisc Player

3-251-286-11 (1)

Wichtig!

Bitte nehmen Sie sich etwas Zeit, um den Geräte-Pass vollständig

auszufüllen. Dieser befindet sich auf der hinteren Umschlagseite dieser

Bedienungsanleitung.

Si dichiara che l’apparecchio è stato fabbricato in conformità all’art. 2, Comma 1 del D.M. 28.08.

1995 n. 548.

MDX-CA790X

For installation and connections, see the supplied installation/connections manual.

Zur Installation und zum Anschluss siehe die mitgelieferte Installations-/Anschlussanleitung.

En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/

raccordement fourni.

Per l’installazione e i collegamenti, fare riferimento al manuale di istruzioni per

l’installazione e i collegamenti in dotazione.

Zie voor het monteren en aansluiten van het apparaat de bijgeleverde handleiding “Installatie

en aansluitingen”.

MiniDisc Player

Welcome !

Thank you for purchasing this Sony MiniDisc

Player. You can enjoy its various features even

more with:

• Optional MD/CD units (both changers and

players)*

• CD TEXT information (displayed when a CD

TEXT disc*

in optional CD units is played).

• Optional controller accessories

Card remote commander RM-X114

Rotary commander RM-X4S

*1 This unit works with Sony products only.

*2 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

This label is located on the bottom of the

chassis.

CAUTION INVISIBLE

DO NOT STARE INTO BEAM OR

VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

LASER RADIATION WHEN OPEN

This label is located on the drive unit’s internal

chassis.

Table of Contents

Location of controls . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notes on MDs . . . . . . . . . . . . . . . . . . . . . . . . 6

About MD group function. . . . . . . . . . . . . . . 6

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 7

Detaching the front panel . . . . . . . . . . . . . . . 8

Setting the clock . . . . . . . . . . . . . . . . . . . . . . 9

MD Player

MD/CD Unit (optional)

Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . . 9

Display items. . . . . . . . . . . . . . . . . . . . . . . . 11

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 11

Playing tracks in random order

— Shuffle Play . . . . . . . . . . . . . . . . . . . . 12

Labelling a CD

— Disc Memo*. . . . . . . . . . . . . . . . . . . . 12

Locating a disc by name

— List-up* . . . . . . . . . . . . . . . . . . . . . . . 13

* Functions available with optional MD/CD unit

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 14

Receiving the stored stations. . . . . . . . . . . . 14

Storing only the desired stations . . . . . . . . . 15

RDS

Overview of RDS . . . . . . . . . . . . . . . . . . . . 15

Automatic retuning for best reception results

— AF (Alternative Frequencies) . . . . . . 16

Receiving traffic announcements

— TA (Traffic Announcement)/

TP (Traffic Programme). . . . . . . . . . . . . 17

Presetting RDS stations

with AF and TA setting . . . . . . . . . . . . . 17

Tuning in stations by programme type

— PTY (Programme types) . . . . . . . . . . 18

Setting the clock automatically

— CT (Clock Time). . . . . . . . . . . . . . . . 19

Other Functions

Using the rotary commander. . . . . . . . . . . . 19

Adjusting the balance and fader . . . . . . . . . 21

Quickly attenuating the sound . . . . . . . . . . 21

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 21

Setting the equalizer (EQ3). . . . . . . . . . . . . 22

Setting the Dynamic Soundstage Organizer

(DSO). . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 23

Removing the unit. . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 25

Error displays . . . . . . . . . . . . . . . . . . . . . . . 27

Location of controls

Refer to the pages listed for details.

a SOURCE (Power on/Radio/CD*

/MD)

button

Selecting the source

b SEL (select) button

Selecting items.

c Volume +/– button

d Display window

e SEEK +/– button

To skip tracks, fast-forward, reverse a track,

tune in stations automatically, find a station

manually.

f DSPL (display mode change) button

9, 11, 13, 15

g OPEN button 8, 9, 10

h DSO button 22

i ATT (attenuate) button 21

j MODE button

Changing the operation

k AF button 16, 17

l SENS/BTM button 14, 15, 17

m Number buttons

Radio:

Storing the desired station on each number

button.

MD/CD*

(1): DISC –*

(2): DISC +*

(3): REP 11

(4): SHUF 12

(5): GP*

/ALBM*

– 10

(6): GP*

/ALBM*

+ 10

n PTY (programme type) /LIST*

button

12, 13, 18

o RESET button (located on the front side of

the unit, behind the front panel) 7

p TA button 17

q Z (eject) button (located on the front side

of the unit, behind the front panel) 10

r OFF (Stop/Power off) button*

8, 10

s Receptor for the card remote

commander

t EQ3 button 22

*1When an optional MD/CD unit is connected.

*2 Available only when an MD containing

groups is inserted in this unit.

*3Available only when an optional CD unit with

the MP3 file control function is connected.

*4Warning when installing in a car without

an ACC (accessory) position on the

ignition switch

After turning off the ignition, be sure to press

and hold (OFF) on the unit until the display

disappears

Otherwise, the display does not turn off and

this causes battery drain.

LIST

DISC

GP/ALBM

AF SENS

BTM REP SHUF

SEL

ATT

MODE

PTY TA

123456

DSO EQ3

SEEK

MDX-CA790X

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

a DSPL button

b MENU button*

c SOURCE button

d SEEK (</,) buttons

e SOUND button

f OFF button

g VOL (+/–) buttons

h MODE button

i LIST button

j DISC (M/m) buttons

k ENTER button*

l ATT button

* Not available for this unit

Note

If the display disappears by pressing (OFF), it cannot

be operated with the card remote commander unless

(SOURCE) on the unit is pressed, or a disc is inserted

to activate the unit first.

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power aerial will extend automatically while

the unit is operating.

• While driving, do not use the CUSTOM FILE

feature or any other functions which may divert

your attention from the road.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit

will not operate properly. In such a case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Card remote commander RM-X114

(optional)

DISC

–

ATTOFF

DSPL MODE

SOURCE

DISC

VOL

–

PRESET

SEEK

–

PRESET –

SOUND

LIST

Notes on MDs

• Do not open the shutter of the cartridge

to expose the MD. Close immediately if

the shutter opens.

• Never touch the surface of the disc inside.

• Do not subject the discs to heat/high

temperature. Avoid leaving them in parked cars

or on dashboards/rear trays.

Notes on attaching labels

To avoid MDs becoming stuck in the unit;

– Attach the label in a suitable position.

– Remove old labels before putting new ones on.

– Replace labels that are peeling away.

Cleaning

Wipe the surface of the cartridge from time to

time with a soft, dry cloth.

About MD group function

The group function is convenient to locate the

desired tracks within a group from a large

number of tracks, or tracks that have been

recorded in MDLP (LP2/LP4) mode.

Notes on MD group settings

• This unit is MD playback only. For MD

recording and group settings, refer to the

operating instructions of your MD recorder.

• The same group name can be registered more

than twice on the same MD.

• Maximum group number is 99, though the

actual group number depends on your MD

recorder.

• Depending on your MD recorder, MD group

settings may not be available.

MD containing groups

* Groups: set by your MD recorder.

When you insert the MD in this unit, playback

starts automatically and follows track order.

12 456789

Group2*Group1* Group3*

Track number

GP (group) assumption on this unit

This unit assumes a track/tracks between groups

as “GP,” so “GP” number is allotted to tracks not

set in a group as well as each group set by your

MD recorder. The indication of “GP” number

lights up in the display window, when an MD

containing groups is inserted in this unit and

played.

MD containing groups and allotted “GP”

numbers on this unit

* Groups: set by your MD recorder.

For using MD group function, refer to “Playing a

disc” (page 9), “Playing tracks repeatedly”

(page 11), and “Playing tracks in random order”

(page 12).

Note

MD group function is available only when an MD

containing groups is inserted in this unit and played.

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ballpoint

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

123456789

GP1

(Group1

GP3

(Group2*)

GP5

(Group3*)

GP2 GP4

RESET button

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

1 Press (OFF)*.

MD/CD playback or radio reception stops

(the key illumination and display remain on).

* If your car has no ACC position on the ignition

switch, be sure to turn the unit off by pressing

(OFF) until the display disappears to avoid car

battery drain.

2 Press (OPEN), then slide the front

panel to the right, and gently pull out

the left end of the front panel.

Notes

• If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent

the speakers from being damaged.

• Do not drop or put excessive pressure on the front

panel and its display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Tip

When carrying the front panel with you, use the

supplied front panel case.

Attaching the front panel

Place hole A of the front panel onto the spindle

B on the unit, then lightly push the left side in.

Press (SOURCE) on the unit (or insert an MD)

to operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (DSPL) for 2 seconds.

The hour indication flashes.

1 Press the volume +/– button to set

the hour.

2 Press (SEL).

The minute indication flashes.

3 Press the volume +/– button to set

the minute.

2 Press (DSPL).

The clock starts. After the clock setting is

completed, the display returns to normal play

mode.

Tip

You can set the clock automatically with the RDS

feature (page 19).

MD Player

MD/CD Unit (optional)

In addition to playing an MD (MD having group

settings) with this unit, you can also control

external MD/CD (MP3 playable CD) units. If

you connect optional MP3 playable CD units

(eg., MP3 CD changer), you can play MP3 files;

compressed audio files (tracks) with quality of

sound.

Note

If you connect an optional CD (MP3 playable CD) unit

with the CD TEXT function, the CD TEXT information

will appear in the display when you play a CD TEXT

disc.

Playing a disc

(With this unit)

1 Press (OPEN) and insert the disc

(labelled side up).

2 Close the front panel.

Playback starts automatically.

If a disc is already inserted, press (SOURCE)

repeatedly until “MD” appears to start playback.

continue to next page t

* Available only when an MD containing groups is

inserted in this unit and played.

Notes

• While the first/last track on the disc is playing, if

(SEEK) (+) or (SEEK) (–) is pressed, playback

skips to the last/first track of the disc.

• When the last track on the disc is over, playback

restarts from the first track of the disc.

(With optional units)

1 Press (SOURCE) repeatedly to select

“MD (MS*

)” or “CD.”

2 Press (MODE) repeatedly until the

desired unit appears.

Playback starts.

*1 MS: MG Memory Stick System-up Player MGS-X1

*2 Available only when an MP3 file is played.

Albums are folders of a CD containing MP3 files.

Cautions when connecting MGS-X1 and MD unit(s)

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press (SOURCE) to

select “MD.” If “MD” appears in the source display,

press (MODE) to select “MS,” to start playback.

• When you want to play an MD unit, press (SOURCE)

to select “MD.” If your desired MD unit appears in the

source display, it starts to play. If “MS” or another

MD unit appears in the source display, press

(MODE) to select your desired MD unit, to start

playback.

Notes when connecting MP3 playable CD unit(s)

• If a disc with no MP3 files (tracks) is inserted, “NO

MUSIC” appears in the display and playback of the

next disc starts.

• Before playing a track, this unit reads all track and

album information on the disc. Depending on the

track structure, it may take more than a minute

before playback begins. During this time, “READ” is

displayed. Please wait for play to start automatically

when the reading is complete.

Note

With an optional unit connected, playback of the same

source will continue on to the optional MD/CD unit.

To Press

Stop playback (OFF)

Eject the disc (OPEN) then Z

Skip tracks

–Automatic

Music Sensor

(SEEK) (–/+)

(./>)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (–/+)

(m/M)

[hold to desired point]

Skip GP*

–GP selection

(5)(GP –) or (6)(GP +)

[once for each group]

[hold to desired group]

To Press

Skip discs

–Disc selection

(1)(DISC–) or

(2)(DISC+)

[once for each disc]

[hold to desired disc]

Skip albums*

–Album selection

(5)(ALBM–) or

(6)(ALBM+)

[once for each album]

[hold to desired album]

Display items

When the disc/group/album/track changes, any

prerecorded title*

of the new disc/group/album/

track is automatically displayed (if the Auto

Scroll function is set to “ON,” names exceeding

8 characters will be scrolled (page 21)).

*1 When pressing (DSPL), “NO NAME”, indicates that

there is no prerecorded name to display.

*2 Available only when an MDLP disc is played.

*3 Available only when an MD containing groups is

inserted in this unit and played.

*4 Available only when an MP3 file is played.

*5 If the disc has been labelled by this unit using the

CUSTOM FILE function, Disc Memo is displayed

preferentially.

*6 Only for CD TEXT discs with the artist name.

Notes

• Some characters cannot be displayed. Characters

and signs which cannot be displayed appear as “ *.”

• For some CD TEXT discs or ID3 tags with very

many characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc or an album.

Tip

When A.SCRL (Auto Scroll) is set to OFF and the disc/

group/album/track name is changed, the disc/group/

album/track name or ID3 tag does not scroll.

Playing tracks repeatedly

— Repeat Play

You can select:

(With this unit)

• REP-TRACK — to repeat the current track.

•REP-GP*

— to repeat tracks in the current

group.

(With optional units)

• REP-TRACK — to repeat the current track.

• REP-ALBM*

— to repeat the tracks in the

current album.

• REP-DISC*

— to repeat the tracks in the

current disc.

*1 Available only when an MD containing groups is

inserted in this unit and played.

*2 Available only when an MP3 file is played.

*3 Available only when one or more optional MD/CD

units are connected.

During playback, press (3) (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

To return to normal play mode, select

“REP-OFF.”

To Press

Switch display item ( DSPL)

Disc/GP*

Album*

number

MDLP display*

LP2: LP2 playback

LP4: LP4 playback

Displayable items

•Track number/

Elapsed playing time

•Disc name

/Group name

Artist name

•Track name

•Clock

• Album name

•ID3 tag

Source

Playing tracks in random

order

— Shuffle Play

You can select:

(With this unit)

•SHUF-GP*

— to play tracks in the current

group in random order.

• SHUF-DISC — to play the tracks on the

current disc in random order.

(With optional units)

•SHUF-ALBUM*

— to play the MP3 files on

an album in the current optional CD unit with

the MP3 file control function in random order.

• SHUF-DISC — to play the tracks on the

current disc in random order.

• SHUF-CHGR*

— to play the tracks in the

current optional MD (CD) unit in random

order.

• SHUF-ALL*

— to play all the tracks in all the

connected MD (CD) units (including this unit)

in random order.

*1 Available only when an MD containing groups is

inserted in this unit and played.

*2 Available only when an MP3 file is played.

*3 Available only when one or more optional MD (CD)

units are connected.

*4 Available only when one or more optional MD units,

or two or more optional CD units are connected.

During playback, press (4) (SHUF)

repeatedly until the desired setting

appears in the display.

Shuffle Play starts.

To return to normal play mode, select

“SHUF-OFF.”

Note

“SHUF-ALL” will not shuffle tracks between MD units

and CD units.

Labelling a CD

— Disc Memo (For a CD unit with the

CUSTOM FILE function)

You can label each disc with a custom name

(Disc Memo). You can enter up to 8 characters

for a disc. If you label a CD, you can locate the

disc by name (page 13).

1 Start playing the disc you want to label

in a CD unit with the CUSTOM FILE

function.

2 Press (PTY) (LIST) for 2 seconds.

The unit will repeat the disc during the

labelling procedure.

3 Enter the characters.

1Press the volume +/– button to

select the desired character.

A y B y C ... y 0 y 1 y 2 ...

y + y – y

... y *

y A

*1 (blank space)

2Press (SEL) after locating the

desired character.

The next character flashes.

3Repeat steps 1 and 2 to enter the

entire name.

4 To return to normal play mode, press

(PTY) (LIST) for 2 seconds.

Tips

• Simply overwrite or enter “ ” to correct or erase a

name.

• You can label CDs on a unit without the CUSTOM

FILE function if that unit is connected along with a

CD unit that has the function. The Disc Memo will be

stored in the memory of the CD unit with the

CUSTOM FILE function.

Note

REP-TRACK/SHUF play is suspended until the Name

Edit is complete.

Viewing the Disc Memo

As a display item, the Disc Memo always takes

priority over any original CD TEXT information.

Tip

Other items can be displayed (page 11).

Erasing the Disc Memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the

CD unit storing the Disc Memo.

3 Press (PTY) (LIST) for 2 seconds.

4 Press (DSPL) for 2 seconds.

The stored names will appear.

5 Press the volume +/– button

repeatedly to select the disc name you

want to erase.

6 Press (SEL) for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (PTY) (LIST) for 2 seconds.

The unit returns to normal play mode.

Notes

• When the Disc Memo for a CD TEXT disc is erased,

the original CD TEXT information is displayed.

• If you cannot find the Disc Memo you want to erase,

try selecting a different CD unit in step 2.

• If you have already erased all of the Disc Memo, the

unit returns to normal CD play mode in step 4.

Locating a disc by name

— List-up (For a CD unit with the CD TEXT/

CUSTOM FILE function, or an MD unit)

You can use this function for discs that have been

assigned custom names*

or for CD TEXT

discs*

*1 Locating a disc by its custom name: when you

assign a name for a CD (page 12) or an MD.

*2 Locating discs by the CD TEXT information: when

you play a CD TEXT disc on a CD unit with the CD

TEXT function.

1 Press (PTY) (LIST) momentarily.

The name assigned to the current disc appears

in the display.

2 Press (PTY) (LIST) repeatedly until

you find the desired disc.

3 Press (SEEK) (+) or (SEEK) (–) to play

the disc.

Notes

• Once a disc name has been displayed for 5

seconds, the display goes back to its normal

playback mode.

• The track names are not displayed during MD

playback.

• If there are no discs in the magazine,"NO DISC"

appears in the display.

• If a disc has not been assigned a custom file,"NO

NAME" appears in the display.

• If the disc information has not been read by the unit,

"NOT READ" appears in the display. To load the

disc, first press the number button, then choose the

disc that has not been loaded.

• The information appears only in upper cases. There

are also some letters which cannot be displayed.

To Press

View (DSPL) during CD/CD

TEXT disc playback

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (S ENS) (BTM) for 2 seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

If preset tuning does not work

— Automatic tuning/Local Seek Mode

Automatic tuning:

Press (SEEK) (+) or (SEEK) (–) to

search for the station.

Scanning stops when the unit receives a

station. Repeat the operation until the desired

station is received.

Local Seek Mode:

If the automatic tuning stops too

frequently, press (SENS) (BTM)

repeatedly until “LOCAL-ON” appears.

Only the stations with relatively strong

signals will be tuned in.

To cancel the Local Seek Mode, press (SENS)

repeatedly.

Tip

If you know the frequency of the station you want to

listen to, press and hold ( SEEK) (+) or (SEEK) (–) to

locate the approximate frequency, then press

(SEEK) (+) or ( SEEK) (–) repeatedly to fine adjust to

the desired frequency (manual tuning).

“LCL” indicator is displayed

If FM stereo reception is poor

— Monaural Mode

During radio reception, press (SENS)

(BTM) repeatedly until “MONO-ON”

appears.

The sound improves, but becomes monaural

(“ST” disappears).

To return to normal radio reception mode, select

“MONO-OFF.”

Tip

If FM broadcasts are difficult to hear, set DSO to OFF

(page 22).

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (SEEK) (+) or (SEEK) (–) to tune

in the station that you want to store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until “MEM”

appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

RDS

Overview of RDS

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio programme signal. For

example, one of the following will be displayed

upon receiving a station with RDS capability.

RDS services

RDS data offers you other conveniences, such as:

• Automatic retuning of a programme, helpful

during long-distance drives. — AF t page 16

• Receiving traffic announcements, even

when enjoying another programme/source.

— TA t page 17

• Selecting stations by the type of programme

— PTY t page 18

• Automatic clock time setting. — CT

t page 19

Notes

• Depending on the country or region, not all of the

RDS functions are available.

• RDS may not work properly if the signal strength is

weak or if the station you are tuned to is not

transmitting RDS data.

“MONO” indicator is displayed

To Press

Switch Clock/

Station name

(DSPL)

Displayable items

• Music source

• Function

Displayable items

• Station name (frequency)

•Clock

• RDS data

Automatic retuning for best

reception results

— AF (Alternative Frequencies)

The AF function allows the radio to always tune

into the area’s strongest signal for the station you

are listening to.

1 Select an FM station (page 14).

2 Press (AF) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

frequency with a stronger signal in the same

network.

If “NO AF” flashes, the currently tuned into

station does not have an alternative frequency.

Notes

• If you want to change the on/off setting while playing

an MD, press (AF).

• When there is no alternative frequency in the area or

when you do not need to search for one, turn the AF

function off by selecting “AF-OFF.”

For stations without alternative

frequencies

Press (SEEK) (+) or (SEEK ) (–) while

the station name is flashing (within 8

seconds).

The unit starts searching for another

frequency with the same PI (Programme

Identification) data (“PI SEEK” appears).

If the unit cannot find the same PI, the unit

returns to the previously selected frequency.

Staying with one regional programme

When AF function is on: this unit’s factory-set

setting restricts reception to a specific region, so

you won’t be switched to another regional station

with a stronger frequency.

If you leave this regional programme’s reception

area or would like to take advantage of the whole

AF function, press (AF) for 2 seconds until

“REG-OFF” appears.

Note

This function does not work in the United Kingdom

and in some other areas.

Local Link function

(United Kingdom only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 Press the number button ((1) to (6))

that has a local station stored on it.

2 Within 5 seconds, press the number

button of the local station again.

3 Repeat this procedure until the

desired local station is received.

Frequencies change automatically.

98.5 MHz

Station

102.5 MHz

96.0 MHz

Receiving traffic

announcements

— TA (Traffic Announcement)/TP (Traffic

Programme)

By activating TA and TP, you can automatically

tune in an FM station broadcasting traffic

announcements. These settings function

regardless of the current FM programme/source,

MD/CD; the unit switches back to the original

source when the bulletin is over.

Press (TA) repeatedly until “TA-ON”

appears.

The unit starts searching for traffic

information stations.

“TP” indicates reception of such stations, and

“TA” flashes during an actual traffic

announcement. The unit will continue

searching for stations available with TP if

“NO TP” is indicated.

To cancel all traffic announcements, select “TA-

OFF.”

Tip

You can also cancel the current announcement by

pressing (SOURCE) or (MODE).

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements so you won’t miss hearing them.

1 Press the volume +/– button to adjust

the desired volume level.

2 Press (TA) for 2 seconds.

“TA” appears and the setting is stored.

Receiving emergency announcements

If either AF or TA is on, the unit will switch to

emergency announcements, if one comes in

while listening to an FM station, or MD/CD.

Presetting RDS stations with

AF and TA setting

When you preset RDS stations, the unit stores

each station’s AF/TA setting (on/off) as well as

its frequency. You can select a different setting

(for AF, TA, or both) for individual preset

stations, or the same setting for all preset

stations. If you preset stations with “AF-ON” the

unit automatically stores stations with the

strongest radio signal.

Presetting the same setting for all

preset stations

1 Select an FM band (page 14).

2 Press (AF) and/or (TA) to select “AF-

ON” and/or “TA-ON.”

Note that selecting “AF-OFF” and “TA-OFF”

applies to non-RDS stations as well as RDS

stations.

3 Press (SENS) (BTM) until “BTM”

flashes.

Presetting different settings for each

preset station

1 Select an FM band, and tune in the

desired station (page 14).

2 Press (AF) and/or (TA) to select “AF-

ON” and/or “TA-ON.”

3 Press the desired number button ((1)

to (6)) until “MEM” appears.

Repeat from step 1 to preset other stations.

Note

If you want to change the AF/TA setting while you are

playing an MD, press (AF) or (TA).

To Press

Cancel current

announcement

(TA)

Tuning in stations by

programme type

— PTY (Programme types)

You can tune in a station by selecting the type of

programme you would like to listen to.

Note

You cannot use this function in some countries where

no PTY data is available.

1 Press (PTY) (LIST) during FM

reception.

The current programme type name appears if

the station is transmitting the PTY data.

“--------” appears if the received station is not

an RDS station, or if the RDS data is not

received.

2 Press (PTY) (LIST) repeatedly until the

desired programme type appears.

The programme types appear in the order

shown in the table.

“NONE” appears if the programme type is

not specified in the RDS data.

3 Press (SEEK) (+) or ( SEEK) (–).

The unit starts searching for a station

broadcasting the selected programme type.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Var ie d VA RI ED

Popular Music POP M

Rock Music ROCK M

Easy Listening EASY M

Light Classical LIGHT M

Classical CLASSICS

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children’s Programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Setting the clock

automatically

— CT (Clock Time)

The CT data from the RDS transmission sets the

clock automatically.

Selecting “CT-ON”

During radio reception, press (SEL)

and (2) simultaneously

The clock is set.

After one second, the display returns to

normal radio reception mode.

To select “CT-OFF”, press (SEL) and (2)

simultaneously again.

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

Other Functions

You can also control the unit (and optional MD/

CD units) with a rotary commander (optional).

Using the rotary commander

First, attach the appropriate label depending on

how you want to mount the rotary commander.

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

Press To

(SOURCE) Change source

(radio/CD*

/MD)/Power on

(MODE) Change operation

(radio band/CD unit*

/MD

unit*

)

(ATT) Attenuate sound

(OFF)*

Stop playback or radio

reception/Power off

(SEL) Adjust and select

(DSPL) Change the display item

continue to next page t

SEL

DSPL

MODE

SEL

DSPL

MODE

OFF

Rotate the VOL control

to adjust the volume.

(SOURCE)

(SEL)

(ATT)

(DSPL)

(OFF)

(MODE)

By rotating the control

Rotate and release to:

– Skip tracks.

– Tune in stations automatically.

Rotate, hold, and release to:

– Fast-forward/reverse a track.

– Find a station manually.

By pushing in and rotating the control

Push in and rotate the control to:

– Receive preset stations.

– Change discs during MD (CD) playback*

Push in, then rotate and hold for a

moment to:

– Enter the GP*

skip mode. Within 2

seconds, push in and rotate again for

continuous skip.

During playback of a CD containing MP3

files*

Push in and repeat rotating quickly to:

– Change discs one by one.

Push in, then rotate and hold for a

moment to:

– Enter the album skip mode. Within 2

seconds, push in and rotate again for

continuous skip.

*1 Only if the corresponding optional equipment is

connected.

*2 If your car has no ACC (accessory) position on the

ignition key switch, after turning off the ignition, be

sure to press and hold (OFF) until the display

disappears.

*3 Available only when an MD containing groups is

inserted in this unit and played.

*4 Available only when optional CD unit with the MP3

file control function is connected.

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SEL) for 2 seconds while

pushing the VOL control.

Note

If you press (SEL) for 2 seconds while pushing the

VOL control, “NORM” or “REV” appears in the display.

– “NORM” is to use the rorary commander at the

factory-set position.

– “REV” is to use the rorary commander when it is

mounted on the right side of the steering column.

SEEK/AMS

control

PRESET/DISC

control

To increase

To decrease

La page charge ...

Sony MDX-CA790X Manuel utilisateur

Marque: Sony

Modèle: MDX-CA790X

Catégorie: Récepteurs multimédia de voiture

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: Sony MDX-CA790X Manuale utente
English: Sony MDX-CA790X User manual
Deutsch: Sony MDX-CA790X Benutzerhandbuch
Nederlands: Sony MDX-CA790X Handleiding

Sony MDX-CA790X Manuel utilisateur

Sony MDX-CA790X Manuel utilisateur

dans d''autres langues

Documents connexes