Smeg U4C082F Manuel utilisateur

Catégorie
Réfrigérateurs-congélateurs
Taper
Manuel utilisateur
U4C082F
User Manual
Refrigerator
Notice d'utili‐
sation
Réfrigérateur
CONTENTS
Safety information 2
Safety instructions 4
Installation 6
Control panel 8
Daily use 8
Hints and tips 9
Care and cleaning 12
Troubleshooting 13
Noises 17
Technical data 17
Information for test institutes 17
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
VISIT OUR WEBSITE TO:
Get usage advice, brochures, trouble shooter, service and repair information:
www.smeg.com/services/customer-service
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damage that are the result of
incorrect installation or usage. Always keep the instructions
in a safe and accessible location for future reference.
Children and vulnerable people safety
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
2
Children aged from 3 to 8 years are allowed to load and
unload the appliance provided that they have been
properly instructed.
This appliance may be used by persons with very
extensive and complex disabilities provided that they have
been properly instructed.
Children of less than 3 years of age should be kept away
from the appliance unless continuously supervised.
Do not let children play with the appliance.
Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
Keep all packaging away from children and dispose of it
appropriately.
General Safety
This appliance is intended to be used in household and
similar applications such as:
Farm houses; staff kitchen areas in shops, offices and
other working environments;
By clients in hotels, motels, bed and breakfast and other
residential type environments.
To avoid contamination of food respect the following
instructions:
do not open the door for long periods;
clean regularly surfaces that can come in contact with
food and accessible drainage systems;
store raw meat and fish in suitable containers in the
refrigerator, so that it is not in contact with or drip onto
other food.
WARNING: Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
3
WARNING: Do not use electrical appliances inside the
food storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
When the appliance is empty for long period, switch it off,
defrost, clean, dry and leave the door open to prevent
mould from developing within the appliance.
One-, two- and three-star compartments are not suitable
for the freezing of fresh food.
Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
SAFETY INSTRUCTIONS
Installation
WARNING! Only a qualified
person must install this
appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Do not use the appliance before
installing it in the built-in structure due
to safety manner.
Follow the installation instructions
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Make sure the air can circulate around
the appliance.
At first installation or after reversing the
door wait at least 4 hours before
connecting the appliance to the power
supply. This is to allow the oil to flow
back in the compressor.
Before carrying out any operations on
the appliance (e.g. reversing the door),
remove the plug from the power socket.
Do not install the appliance close to
radiators or cookers, ovens or hobs.
Do not expose the appliance to the
rain.
Do not install the appliance where there
is direct sunlight.
Do not install this appliance in areas
that are too humid or too cold.
When you move the appliance, lift it by
the front edge to avoid scratching the
floor.
Electrical connection
WARNING! Risk of fire and
electric shock.
WARNING! When positioning
the appliance, ensure the
supply cord is not trapped or
damaged.
4
WARNING! Do not use multi-
plug adapters and extension
cables.
The appliance must be earthed.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Always use a correctly installed
shockproof socket.
Make sure not to cause damage to the
electrical components (e.g. mains plug,
mains cable, compressor). Contact the
Authorised Service Centre or an
electrician to change the electrical
components.
The mains cable must stay below the
level of the mains plug.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Use
WARNING! Risk of injury,
burns, electric shock or fire.
The appliance contains flammable
gas, isobutane (R600a), a natural gas with
a high level of environmental compatibility.
Be careful not to cause damage to the
refrigerant circuit containing isobutane.
Do not change the specification of this
appliance.
Do not put electrical appliances (e.g.
ice cream makers) in the appliance
unless they are stated applicable by the
manufacturer.
If damage occurs to the refrigerant
circuit, make sure that there are no
flames and sources of ignition in the
room. Ventilate the room.
Do not let hot items to touch the plastic
parts of the appliance.
Do not store flammable gas and liquid
in the appliance.
Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
Do not touch the compressor or the
condenser. They are hot.
Internal lighting
WARNING! Risk of electric
shock.
Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational status
of the appliance. They are not intended
to be used in other applications and are
not suitable for household room
illumination.
Care and cleaning
WARNING! Risk of injury or
damage to the appliance.
Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
This appliance contains hydrocarbons
in the cooling unit. Only a qualified
person must do the maintenance and
the recharging of the unit.
Regularly examine the drain of the
appliance and if necessary, clean it. If
the drain is blocked, defrosted water
collects in the bottom of the appliance.
Service
To repair the appliance contact the
Authorised Service Centre. Use original
spare parts only.
Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
5
The following spare parts will be
available for 7 years after the model
has been discontinued: thermostats,
temperature sensors, printed circuit
boards, light sources, door handles,
door hinges, trays and baskets. Please
note that some of these spare parts are
only available to professional repairers,
and that not all spare parts are relevant
for all models.
Door gaskets will be available for 10
years after the model has been
discontinued.
Disposal
WARNING! Risk of injury or
suffocation.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Remove the door to prevent children
and pets to be closed inside of the
appliance.
The refrigerant circuit and the insulation
materials of this appliance are ozone-
friendly.
The insulation foam contains
flammable gas. Contact your municipal
authority for information on how to
discard the appliance correctly.
Do not cause damage to the part of the
cooling unit that is near the heat
exchanger.
INSTALLATION
WARNING! Refer to Safety
chapters.
WARNING! Refer to
installation instruction
document to install your
appliance.
WARNING! Fix the appliance
in accordance with installation
instruction document to avoid a
risk of instability of the
appliance.
Dimensions
H1
H2
W1
D1
W2
D2
D3
W3
9
Overall dimensions ¹
H1 mm 819
Overall dimensions ¹
W1 mm 560
6
Overall dimensions ¹
D1 mm 547
¹ the height, width and depth of the
appliance without the handle and feet
Space required in use ²
H2 mm 820
W2 mm 560
D2 mm 550
² the height, width and depth of the
appliance including the handle, plus the
space necessary for free circulation of the
cooling air
Overall space required in use ³
H2 mm 820
W3 mm 560
D3 mm 1083
³ the height, width and depth of the
appliance including the handle, plus the
space necessary for free circulation of the
cooling air, plus the space necessary to
allow door opening to the minimum angle
permitting removal of all internal
equipment
Location
To ensure appliance's best functionality,
you should not install the appliance in the
nearby of the heat source (oven, stoves,
radiators, cookers or hobs) or in a place
with direct sunlight. Make sure that air can
circulate freely around the back of the
cabinet.
This appliance should be installed in a dry,
well ventilated indoor position.
This appliance is intended to be used at
ambient temperature ranging from 10°C to
38°C.
The correct operation of the
appliance can only be
guaranteed within the specified
temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer service
or to the nearest Authorised
Service Centre.
It must be possible to
disconnect the appliance from
the mains power supply. The
plug must therefore be easily
accessible after installation.
Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
The manufacturer declines all
responsibility if the above safety
precautions are not observed.
This appliance complies with the E.E.C.
Directives.
Ventilation requirements
CAUTION! Appliance must be
installed according to
installation instruction in order
to ensure required ventilation.
Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.
7
CAUTION! At every stage of
reversing the door protect the
floor from scratching with a
durable material.
CONTROL PANEL
Switching on
1. Insert the plug into the wall socket.
2. Turn the temperature regulator
clockwise to a medium setting.
Switching off
To turn off the appliance, turn the
temperature regulator to the "O" position.
Temperature regulation
The temperature is regulated
automatically. However, you can set a
temperature inside the appliance yourself.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
room temperature,
frequency of opening the door,
quantity of food stored,
appliance location.
A medium setting is generally the most
suitable one.
To operate the appliance:
1. Turn the temperature regulator
clockwise to obtain a lower
temperature inside the appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
DAILY USE
CAUTION! This refrigerating
appliance is not suitable for
freezing foodstuffs.
Positioning the door shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1. Gradually pull the shelf up until it
comes free.
2. Reposition as required.
8
This model is equipped with a variable
storage box which can be moved
sideways.
Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the
shelves can be positioned as desired.
Do not move the glass shelf
above the vegetable drawer to
ensure correct air circulation.
Vegetable drawer
There is a special drawer in the bottom
part of the appliance suitable for storage
of fruits and vegetables.
Temperature indicator
For proper storage of food the refrigerator
is equipped with the temperature indicator.
The symbol on the side wall of the
appliance indicates the coldest area in the
refrigerator.
If OK is displayed (A), put fresh food into
area indicated by symbol, if not (B), wait at
least 12 hours and check if it is OK (A).
If it is still not OK (B), adjust the setting
control to a colder setting.
OK
OK
A
B
Storage of frozen food
When activating an appliance for the first
time or after a period out of use, before
putting the products in the compartment
let the appliance run at least 3 hours.
Keep the food no closer than 15 mm from
the door.
CAUTION! In the event of
accidental defrosting, for
example due to a power failure,
if the power has been off for
longer than the value shown on
rating plate under "rising time",
the defrosted food must be
consumed quickly or cooked
immediately then cooled and
then re-frozen.
Thawing
Deep-frozen or frozen food, prior to being
consumed, can be thawed in the
refrigerator or inside a plastic bag under
cold water.
This operation depends on the time
available and on the type of food. Small
pieces may even be cooked still frozen.
HINTS AND TIPS
Hints for energy saving
Fridge: Most efficient use of energy is
ensured in the configuration with the
drawers in the bottom part of the
appliance and shelves evenly
distributed. Position of the door bins
does not affect energy consumption.
Do not open the door frequently or
leave it open longer than necessary.
Freezer: The colder the temperature
setting, the higher the energy
consumption.
Fridge: Do not set too high temperature
to save energy unless it is required by
the characteristics of the food.
9
If the ambient temperature is high and
the temperature control is set to low
temperature and the appliance is fully
loaded, the compressor may run
continuously, causing frost or ice
formation on the evaporator. In this
case, set the temperature control
toward higher temperature to allow
automatic defrosting and to save
energy this way.
Ensure a good ventilation. Do not cover
the ventilation grilles or holes.
Hints for storage of frozen food
Freezer compartment is the one
marked with
.
The medium temperature setting
ensures good preservation of frozen
food products.
Higher temperature setting inside the
appliance may lead to shorter shelf life.
The whole freezer compartment is
suitable for storage of frozen food
products.
Leave enough space around the food
to allow air to circulate freely.
For adequate storage refer to food
packaging label to see the shelf life of
food.
It is important to wrap the food in such
a way that prevents water, humidity or
condensation from getting inside.
Shopping tips
After grocery shopping:
Ensure that the packaging is not
damaged - the food could be
deteriorated. If the package is swollen
or wet, it might have not been stored in
the optimal conditions and defrosting
may have already started.
To limit the defrosting process buy
frozen goods at the end of your grocery
shopping and transport them in a
thermal and insulated cool bag.
Place the frozen foods immediately in
the freezer after coming back from the
shop.
If food has defrosted even partially, do
not re-freeze it. Consume it as soon as
possible.
Respect the expiry date and the
storage information on the package.
Shelf life for freezer compartment
Type of food Shelf life (months)
Bread 3
Fruits (except citrus) 6 - 12
Vegetables 8 - 10
Leftovers without meat 1 - 2
Dairy food:
Butter
Soft cheese (e.g. mozzarella)
Hard cheese (e.g. parmesan, cheddar)
6 - 9
3 - 4
6
Seafood:
10
Type of food Shelf life (months)
Fatty fish (e.g. salmon, mackerel)
Lean fish (e.g. cod, flounder)
Shrimps
Shucked clams and mussels
Cooked fish
2 - 3
4 - 6
12
3 - 4
1 - 2
Meat:
Poultry
Beef
Pork
Lamb
Sausage
Ham
Leftovers with meat
9 - 12
6 - 12
4 - 6
6 - 9
1 - 2
1 - 2
2 - 3
Hints for fresh food refrigeration
The medium temperature setting
ensures good preservation of fresh
food.
Higher temperature setting inside the
appliance may lead to shorter shelf life
of food.
Cover the food with packaging to
preserve its freshness and aroma.
Always use closed containers for
liquids and for food, to avoid flavours or
odours in the compartment.
To avoid the cross-contamination
between cooked and raw food, cover
the cooked food and separate it from
the raw one.
It is recommended to defrost the food
inside the fridge.
Do not insert hot food inside the
appliance. Make sure it has cooled
down at room temperature before
inserting it.
To prevent food waste the new stock of
food should always be placed behind
the old one.
Hints for food refrigeration
Fresh food compartment is the one
marked (on the rating plate) with .
Meat (all types): wrap in a suitable
packaging and place it on the glass
shelf above the vegetable drawer.
Store meat for at most 1-2 days.
Fruit and vegetables: clean thoroughly
(eliminate the soil) and place in a
special drawer (vegetable drawer).
It is advisable not to keep the exotic
fruits like bananas, mangos, papayas
etc. in the refrigerator.
Vegetables like tomatoes, potatoes,
onions, and garlic should not be kept in
the refrigerator.
Butter and cheese: place in an airtight
container or wrap in an aluminium foil
or a polythene bag to exclude as much
air as possible.
Bottles: close them with a cap and
place them on the door bottle shelf, or
(if available) on the bottle rack.
Always refer to the expiry date of the
products to know how long to keep
them.
11
CARE AND CLEANING
WARNING! Refer to Safety
chapters.
Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap to
remove the typical smell of a brand-new
product, then dried thoroughly.
CAUTION! Do not use
detergents, abrasive powders,
chlorine or oil-based cleaners
as they will damage the finish.
CAUTION! The accessories
and parts of the appliance are
not suitable for washing in a
dishwasher.
Periodic cleaning
The equipment has to be cleaned
regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral
soap.
2. Regularly check the door seals and
wipe them clean to ensure they are
clean and free from debris.
3. Rinse and dry thoroughly.
Defrosting of the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment
during normal use. The defrost water
drains out through a trough into a special
container at the back of the appliance,
over the motor compressor, where it
evaporates.
It is important to periodically clean the
defrost water drain hole situated under the
salad drawers to prevent the water
overflowing and dripping onto the food
inside.
For this purpose use the tube cleaner
provided with the appliance.
Defrosting of the freezer
CAUTION! Never use sharp
metal tools to scrape off frost
from the evaporator as you
could damage it.
Do not use a mechanical
device or any artificial means to
speed up the thawing process
other than those recommended
by the manufacturer.
About 12 hours prior to
defrosting set a lower
temperature in order to build up
sufficient chill reserve in case
of any interruption in operation.
A certain amount of frost will always form
on the freezer shelves and around the top
compartment.
Defrost the freezer when the frost layer
reaches a thickness of about 3-5 mm.
1. Switch off the appliance or pull out
electrical plug from the wall socket.
2. Remove any stored food and put it in a
cool place.
CAUTION! A temperature
rise of the frozen food
packs during defrosting
may shorten their safe
storage life.
Do not touch frozen goods
with wet hands. Hands can
freeze to the goods.
12
3. Leave the door open. Protect the floor
from the defrosting water e.g. with a
cloth or a flat vessel.
4. In order to speed up the defrosting
process, place a pot of warm water in
the freezer compartment. In addition,
remove pieces of ice that break away
before defrosting is complete.
5. When defrosting is complete, dry the
interior thoroughly.
6. Switch on the appliance and close the
door.
7. Set the temperature regulator to obtain
the maximum coldness and run the
appliance for at least 3 hours using
this setting.
Only after this time put the food back into
the freezer compartment.
Cleaning the air channels
1. Remove the plinth (A), then the
ventilation grid (B).
C AB
2. Clean the ventilation grid. (Refer to
"Cleaning the ventilation filter". )
3. Carefully pull the air deflector out (C),
checking that there is no water left
from the defrosting.
4. Clean the lower part of the appliance
with a vacuum cleaner.
Cleaning the ventilation filter
The filter can be removed for washing.
The appliance is equipped with an air inlet
filter (1) and an air outlet duct (2) on the
ventilation grid.
2
1
A
B
1. Pinch flaps (A) and (B) with fingers.
2. Pull the filter down.
3. Pull the filter out.
4. To replace the filter reverse the
process.
Period of non-operation
When the appliance is not in use for long
period, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Defrost the appliance.
4. Clean the appliance and all
accessories.
5. Leave the doors open to prevent
unpleasant smells.
TROUBLESHOOTING
WARNING! Refer to Safety
chapters.
13
What to do if...
Problem Possible cause Solution
The appliance does not op‐
erate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not con‐
nected to the mains socket
correctly.
Connect the mains plug to
the mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains sock‐
et. Contact a qualified elec‐
trician.
The appliance is noisy. The appliance is not suppor‐
ted properly.
Check if the appliance
stands stable.
The compressor operates
continually.
Temperature is set incor‐
rectly.
Refer to "Control Panel"
chapter.
Many food products were
put in at the same time.
Wait a few hours and then
check the temperature
again.
The room temperature is too
high.
Refer to "Installation" chap‐
ter.
Food products placed in the
appliance were too warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed cor‐
rectly.
Refer to "Closing the door"
section.
Door is misaligned or inter‐
feres with ventilation grill.
The appliance is not level‐
led.
Refer to installation instruc‐
tions.
Door does not open easily. You attempted to re-open
the door immediately after
closing.
Wait a few seconds between
closing and re-opening of
the door.
The lamp does not work. The lamp is in stand-by
mode.
Close and open the door.
The lamp is defective. Refer to "Replacing the
lamp" section.
There is too much frost and
ice.
The door is not closed cor‐
rectly.
Refer to "Closing the door"
section.
The gasket is deformed or
dirty.
Refer to "Closing the door"
section.
Food products are not wrap‐
ped properly.
Wrap the food products bet‐
ter.
14
Problem Possible cause Solution
Temperature is set incor‐
rectly.
Refer to "Control Panel"
chapter.
Appliance is fully loaded and
is set to the lowest tempera‐
ture.
Set a higher temperature.
Refer to "Control Panel"
chapter.
Temperature set in the ap‐
pliance is too low and the
ambient temperature is too
high.
Set a higher temperature.
Refer to "Control Panel"
chapter.
Water flows on the rear plate
of the refrigerator.
During the automatic de‐
frosting process, frost melts
on the rear plate.
This is correct.
There is too much con‐
densed water on the rear
wall of the refrigerator.
Door was opened too fre‐
quently.
Open the door only when
necessary.
Door was not closed com‐
pletely.
Make sure the door is
closed completely.
Stored food was not wrap‐
ped.
Wrap food in suitable pack‐
aging before storing it in the
appliance.
Water flows inside the refrig‐
erator.
Food products prevent the
water from flowing into the
water collector.
Make sure that food prod‐
ucts do not touch the rear
plate.
The water outlet is clogged. Clean the water outlet.
Water flows on the floor. The melting water outlet is
not connected to the evapo‐
rative tray below the appli‐
ance.
Attach the melting water out‐
let to the evaporative tray.
The temperature in the ap‐
pliance is too low/too high.
The temperature is not set
correctly.
Set a higher/lower tempera‐
ture.
The door is not closed cor‐
rectly.
Refer to "Closing the door"
section.
The food products' tempera‐
ture is too high.
Let the food products tem‐
perature decrease to room
temperature before storage.
Many food products are
stored at the same time.
Store less food products at
the same time.
The thickness of the frost is
greater than 4-5 mm.
Defrost the appliance.
15
Problem Possible cause Solution
The door has been opened
often.
Open the door only if neces‐
sary.
There is no cold air circula‐
tion in the appliance.
Make sure that there is cold
air circulation in the appli‐
ance. Refer to "Hints and
Tips" chapter.
If the advice does not lead to
the desired result, call the
nearest Authorized Service
Centre.
Replacing the lamp
The appliance is equipped with
a long-life LED interior light.
It is strongly recommended to
use original spare parts only.
Use LED bulbs (E14 base)
only. The maximum power is
shown on the lamp unit.
CAUTION! Disconnect the plug
from the mains socket.
1. Using a screwdriver, remove the screw
from the lamp cover.
2. Detach the lamp cover in the direction
of the arrows.
3. Replace the bulb with the one that has
identical characteristics and is
specifically designed for household
appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door.
Make sure that the light switches on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
16
NOISES
SSSRRR!
CLICK!
HISSS!
BRRR!
BLUBB!
TECHNICAL DATA
The technical information is situated in the
rating plate on the internal side of the
appliance and on the energy label.
The QR code on the energy label supplied
with the appliance provides a web link to
the information related to the performance
of the appliance in the EU EPREL
database. Keep the energy label for
reference together with the user manual
and all other documents provided with this
appliance.
It is also possible to find the same
information in EPREL using the link
https://eprel.ec.europa.eu
and the model
name and product number that you find on
the rating plate of the appliance.
See the link
www.theenergylabel.eu
for
detailed information about the energy
label.
INFORMATION FOR TEST INSTITUTES
Installation and preparation of the
appliance for any EcoDesign verification
shall be compliant with EN 62552.
Ventilation requirements, recess
dimensions and minimum rear clearances
shall be as stated in this User Manual at
Chapter 3. Please contact the
manufacturer for any other further
information, including loading plans.
17
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put
the packaging in relevant containers to
recycle it. Help protect the environment
and human health by recycling waste of
electrical and electronic appliances. Do
not dispose of appliances marked with the
symbol with the household waste.
Return the product to your local recycling
facility or contact your municipal office.
18
TABLE DES MATIÈRES
Informations de sécurité 19
Consignes de sécurité 21
Installation 23
Bandeau de commande 25
Utilisation quotidienne 26
Conseils 27
Entretien et nettoyage 30
Dépannage 32
Bruits 35
Données techniques 35
Informations pour les instituts de test 36
SERVICE ET ASSISTANCE À LA CLIENTÈLE
N’utilisez que des pièces de rechange d’origine.
Avant de contacter notre centre de service agréé, assurez-vous de disposer des
informations suivantes : Modèle, Numéro de série.
Ces informations figurent sur la plaque signalétique.
Avertissement/Consignes de sécurité
Informations générales et conseils
Informations environnementales
VISITEZ NOTRE SITE WEB POUR :
Obtenir des conseils d’utilisation, des brochures, un dépanneur, des informations sur
le service et les réparations :
www.smeg.com/services/customer-service
Sous réserve de modifications.
INFORMATIONS DE SÉCURITÉ
Avant d'installer et d'utiliser cet appareil, lisez
soigneusement les instructions fournies. Le fabricant ne
pourra être tenu pour responsable des blessures et dégâts
résultant d'une mauvaise installation ou utilisation.
Conservez toujours les instructions dans un lieu sûr et
accessible pour vous y référer ultérieurement.
Sécurité des enfants et des personnes vulnérables
Cet appareil peut être utilisé par des enfants âgés d'au
moins 8 ans et par des personnes ayant des capacités
physiques, sensorielles ou mentales réduites ou dénuées
d’expérience ou de connaissance, s'ils sont correctement
surveillés ou si des instructions relatives à l'utilisation de
19
l'appareil en toute sécurité leur ont été données et s’ils
comprennent les risques encourus.
Les enfants de 3 à 8 ans peuvent charger et décharger
l’appareil à condition qu’ils aient reçu des instructions
appropriées.
Cet appareil peut être utilisé par des personnes souffrant
de handicaps très importants et complexes à conditions
qu’elles aient reçu des instructions appropriées.
Les enfants de moins de 3 ans doivent être tenus à l'écart
de l'appareil, à moins d'être surveillés en permanence.
Ne laissez pas les enfants jouer avec l'appareil.
Le nettoyage et l'entretien ne doivent pas être effectués
par des enfants sans surveillance.
Ne laissez pas les emballages à la portée des enfants et
jetez-les convenablement.
Sécurité générale
Cet appareil est conçu pour un usage domestique et des
applications équivalentes, notamment :
bâtiments de ferme, cuisines réservées aux employés
dans les magasins, bureaux et autres lieux de travail ;
l'utilisation par les clients des hôtels, motels, des
environnements du type chambres d’hôtes et autres
environnements à caractère résidentiel.
Pour éviter la contamination des aliments, respectez les
instructions suivantes :
n’ouvrez pas la porte pendant de longues durées ;
nettoyez régulièrement les surfaces pouvant être en
contact avec les aliments et les systèmes d’évacuation
accessibles ;
conservez la viande et le poisson crus dans des
récipients appropriés dans le réfrigérateur, afin qu’ils ne
soient pas en contact ou ne coulent pas sur d’autres
aliments.
AVERTISSEMENT : Veillez à ce que les orifices de
ventilation, situés dans l'enceinte de l'appareil ou dans la
structure intégrée, ne soient pas obstrués.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Smeg U4C082F Manuel utilisateur

Catégorie
Réfrigérateurs-congélateurs
Taper
Manuel utilisateur

dans d''autres langues