Spectrum Industries 37319-DCB Guide de démarrage rapide

Taper
Guide de démarrage rapide
??
Flex Active Flip Table
0191092R2 Page 1 of 4
Quickstart Guide
37319
Important
Before using this product:
Read this manual
Comply with all safety and operating instructions
Ensure all parts and correct quantities are included
Important
Avant d’utiliser ce produit:
Veillez à lire ce guide
Respectez les consignes de sécurité et d’utilisation
Vériez que vous disposez de toutes les pièces
nécessaires à l’installation
Importante
Antes de utilizar este producto:
Lea este manual
Cumpla con todas las instrucciones de prevención de
accidentes y operativas
Revise que todas las partes y las cantidades correctas
estén incluidas
Any parts damaged during shipment must be reported within 5
days of receipt. To report information regarding missing parts or
damage, to purchase parts or accessories, or if you have any
questions, please contact us.
Thank you for purchasing Spectrum products!
Les pièces endommagées pendant le transport doivent faire
l’objet d’un rapport dans les 5 jours de leur réception. Veuillez
prendre contact avec nous si des pièces manquent ou sont
abîmées, si vous avez des questions, ou encore pour acheter
des pièces ou des accessoires.
Merci pour votre achat d’un produit Spectrum!
Si alguna parte se dañó durante el embarque, deberá reportarla
en un lapso de 5 días a partir de la recepción. Para reportar
cualquier información sobre partes faltantes o dañadas, para
adquirirlas o comprar accesorios, o bien, si tiene alguna duda,
póngase en contacto con nosotros.
¡Gracias por adquirir productos Spectrum!
Owner’s Manual
Le manuel du propriétaire
El manual del propietario
Video
Vidéo
Vídeo
Specs
Spécications
Especicaciones
800-235-1262
www.spectrumfurniture.com
0191092R2 Page 2 of 4
(4) 026073
#8 x 3/4” PHSM
(2) 0141220
Flex Active Flip leg
(4) 0105662
Stem Caster 60mm
5/16-18 x 1”
Hardware
(4) 051070
Cable clip
(1) Worksurface assembly
(8) 026064
1/4-20 x 5/8” PHMS
Power Module
(may or may not
be included)
Read this owners manual before assembly or operation.
Do not allow children to move the table.
For indoor use only. Do not install or store the table where it will be
exposed to moisture.
Do not block the ventilation openings.
Do not allow anyone to sit, stand, or climb on the table.
Use a damp, soft-cloth, or sponge, with mild soap or detergent solution
to clean dirty surfaces. Do not use harsh solvents or abrasives.
This table is intended for institutional use. It does not have any user-
serviceable parts or user-maintenance requirements. If servicing is
necessary, please contact Spectrum Industries for assistance.
General Electrical Safety:
Keep power switches in the OFF position before plugging or
unplugging from the wall outlet.
Be sure total device / equipment load does not exceed 12-amps.
Do not plug power cords into an extension cord.
Inspect power cords for damage before each use. Do not use cords
that are damaged.
Unplug power cord from electrical outlet by gripping the cord-do not
unplug by pulling only on the cord.
Do not step on, drive over, drag, or place objects on power cords.
For added safety, plug into a grounded outlet controlled by a GFI
(Ground Fault Interrupter) circuit breaker.
Damaged electrical components can create signifi cant hazards to
users and is not covered by the warranty. Repairs should always be
performed by a qualifi ed electrician.
Electrical devices are not toys. Children are often unaware of the
hazards associated with electrical devices. This table must always
be used by adults or with adult supervision.
Warning - Relocating audio and/or video equipment to furniture not specifi cally
designed to support audio and/or video equipment may result in death or
serious injury due to the furnishing collapsing or over turning onto a child.
Warning - Death or serious injury may occur when children climb
on audio and/or video equipment furniture. A remote control or toys
placed on the furnishing may encourage a child to climb on the
furnishing and as a result the furnishing may tip over on to the child.
Important Safety and Care Instructions
Components
0191092R2 Page 3 of 4
X 4
1
/
2
Assembly
1/4-20 x 5/8” PHMS
(4 per leg)
Leg
Leg
Worksurface Assembly
#8 x 3/4” PHSM
Worksurface
Cable clip
Pilot hole
Power cord
X 4
1
2
3
4
1Attach legs to worksurface assembly
2Install casters 3Secure power cords - (if equipped)
Note: Be sure casters
are tightened securely.
X 2
0191092R2 Page 4 of 4
© 2019 Spectrum Industries Inc., All rights reserved.
1
2
4Place upright 5Flipping worksurface
6Casters 7Nesting
Note: If any casters are not contacting the oor, loosen the
1/4-20 x 5/8” PHM leg screws installed in step 1. After making
sure all casters contact the oor, retighten the screws.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Spectrum Industries 37319-DCB Guide de démarrage rapide

Taper
Guide de démarrage rapide

dans d''autres langues