CONTINENTAL EDISON 94FHD905V Operating Instructions Manual

94FHD905V

OPERATING INSTRUCTIONS

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

Lisez toutes les instructions avant d'utiliser ce téléviseur et conservez le manuel

d'utilisation dans un lieu sûr pour pouvoir vous y référer ultérieurement.

www.vestel-france.fr

English - 1 -

Contents

Features ................................................................. 2

Introduction ............................................................. 2

Preparation ............................................................. 2

Safety Precautions ................................................. 3

Licence Notiﬁ cation (optional)............................. 4

TRADEMARK ACKNOWLEDGMENT ................ 4

Connection to a Television Distribution

System (Cable TV etc.) from Tuner .................... 4

Package Contents .................................................. 4

Environmental Information ..................................... 5

Repair Information .......................................... 5

Remote Control Buttons ......................................... 6

LCD TV and Operating Buttons .............................. 7

Viewing the Back side Connections ....................... 7

Viewing the Connections - Side Connectors .......... 8

Power Connection .................................................. 8

Aerial Connection ............................................... 8

Using Digital Multimedia Connectors...................... 9

USB Memory Connection ................................... 9

Connecting the LCD TV to a PC ............................. 9

Connecting to a DVD Player................................. 10

Using Side AV Connectors ................................... 10

Using Other Connectors ....................................... 10

Remote Control Handset ...................................... 10

Inserting Batteries ............................................. 10

Switching On/Off ....................................................11

To Switch the TV On ..........................................11

To Switch the TV Off ..........................................11

Digital Teletext (** for UK only) ..........................11

Analogue Teletext ..............................................11

Input Selection .......................................................11

Operation with the Buttons on the TV ................11

Volume Setting ...............................................11

Programme Selection ....................................11

Viewing Main Menu ........................................11

AV Mode ........................................................11

Operation with the Remote Control ...................11

Volume Setting ...............................................11

Programme Selection

(Previous or Next Programme) ..................... 12

Programme Selection (Direct Access) .......... 12

First Time Installation............................................ 13

Auto Tuning .......................................................... 14

Auto Channel Scan Menu Operation ................ 14

Manual Tuning ..................................................... 14

Digital Manual Search....................................... 14

Analogue Manual Search ................................. 14

Analog Fine Tune.............................................. 14

First Time Installation ........................................ 14

Clear Service List (*) ......................................... 15

Managing Stations: Channel List .......................... 15

Operating the Channel List ............................... 15

Moving a Channel ............................................. 15

Deleting a Channel ........................................... 15

Renaming a Channel ........................................ 15

Locking a Channel ............................................ 15

Managing Stations: Favourites ............................. 16

Button Functions ............................................... 16

Managing Stations: Sorting Channel List ............. 16

On-Screen Information ......................................... 16

Media Playback Using Media Browser ................. 16

Viewing Videos via USB .................................. 17

Viewing Photos via USB ................................... 17

Media Browser Settings .................................... 18

Changing Image Size: Picture Formats ................ 18

Conﬁ guring Picture Settings ................................. 19

Operating Picture Settings Menu Items ............ 19

Picture Settings Menu Items ............................. 19

PC Picture Settings........................................... 20

Conﬁ guring Sound Settings .................................. 20

Operating Sound Settings Menu Items ............. 20

Sound Settings Menu Items.............................. 20

Conﬁ guring Your TV’s Settings ............................. 21

Operating Settings Menu Items ........................ 21

Settings Menu Items ......................................... 21

Using a Conditional Access Module ..................... 21

Viewing Conditional Access Menu (*) ............... 21

Conﬁ guring Language Preferences ...................... 22

Language Settings ............................................ 22

Parental Control.................................................... 22

Parental Settings Menu Operation (*) ............... 23

Timers ................................................................... 23

Setting Sleep Timer .......................................... 23

Setting Programme Timers ............................... 23

Adding a Timer .............................................. 23

Editing a Timer .............................................. 23

Deleting a Timer ............................................ 23

Conﬁ guring Date/Time Settings ............................ 24

Conﬁ guring Source Settings ................................. 24

Conﬁ guring Other Settings ................................... 24

Operation .......................................................... 24

Other Features ..................................................... 25

Teletext ................................................................. 26

Tips ....................................................................... 26

Appendix A: PC Input Typical Display Modes ....... 27

Appendix B: AV and HDMI Signal

Compatibility (Input Signal Types) ........................ 27

Appendix C: Supported DVI Resolutions.............. 28

Appendix D: Supported File Formats

for USB Mode ....................................................... 28

Appendix E: Software Upgrade ............................ 29

Speciﬁ cations ....................................................... 30

Digital Reception (DVB-T) .................................... 30

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 101_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1 17.09.2010 18:45:0317.09.2010 18:45:03

English - 2 -

Features

Remote controlled colour LCD TV.•

Fully integrated Terrestrial digital TV (DVB-T - MPEG2) •

(DVB-T- MPEG4).

HDMI connectors for digital video and audio. This •

connection is also designed to accept high deﬁ nition

signals.

USB input.•

1000 programmes (analogue+digital).•

OSD menu system.•

Integrated tuner DVB-T HD, MPEG 2 / MPEG 4 •

compatible.

Scart socket for external devices (such as video, •

video games, audio set, etc.).

Stereo sound system. (German+Nicam)•

Teletext, fastext, TOP text.•

Headphone connection.•

Automatic programming system.•

Forward or backward manual tuning.•

Sleep timer / Child lock.•

Automatic sound mute when no transmission.•

NTSC playback. •

AVL (Automatic Volume Limiting).•

Auto power down.•

PLL (Frequency Search).•

PC input. •

Plug&Play for Windows 98, ME, 2000, XP, Vista.•

Game Mode •

Introduction

Please read the corresponding instructions of this

handbook prior to the ﬁ rst usage of the device, even

when the usage of electronic devices is familiar

to you. Notice especially the chapter SAFETY

PRECAUTIONS. Carefully keep the handbook as

future reference. When selling the device or giving it

away, absolutely give these direction for use.

Thank you for choosing this product. This manual will

guide you for the proper operation of your TV.

Before operating the TV, please read this

manual thoroughly. Please do keep this

manual in a safe place for future references.

This device is intended to receive and display TV

programs. The different connection options make

an additional expansion of the reception and display

sources possible (receiver, DVD player, DVD

recorder,

VCR, PC etc.). This device is only suitable for the

operation in dry interiors. This appliance is intended

solely for private domestic use and may not be used

for industrial and commercial purposes. We exclude

liability in principle, if the device is not used as

intended, or unauthorized modiﬁ cations have been

made. To operate your LCD TV in extreme ambient

conditions may cause the damage of the device.

Preparation

For ventilation, leave a free space of at least 10 cm

all around the set. To prevent any fault and unsafe

situations, please do not place any objects on top of

the set. Use this device in moderate climates.

10 cm

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 201_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 2 17.09.2010 18:45:0417.09.2010 18:45:04

English - 3 -

Safety Precautions

Read the following recommended safety

precautions carefully for your safety.

Power Source

The TV set should be operated only from a 220-240

V AC, 50 Hz outlet. Ensure that you select the correct

voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on

the power cord (mains lead) or pinch the cord. The

connection plug should be readily accessible to the

power cord and mains. Handle the power cord by the

plug. Do not unplug the appliance by pulling from the

power cord and never touch the power cord with wet

hands as this could cause a short circuit or electric

shock. Never make a knot in the cord or tie it with

other cords. The power cords should be placed in

such a way that they are not likely to be stepped on.

A damaged power cord can cause ﬁ re or give you an

electric shock. When it is damaged and needs to be

replaced, it should be done by qualiﬁ ed personnel.

Moisture and Water

Do not use this device in a humid and

damp place (avoid the bathroom, the

sink in the kitchen, and near the washing

machine). Do not expose this device to

rain or water, as this may be dangerous

and do not place objects filled with

liquids, such as ﬂ ower vases, on top.

Avoid from dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug

the TV and have it checked by qualiﬁ ed personnel

before operating it any further.

Cleaning

Before cleaning, unplug the TV set

from the wall outlet. Do not use liquid

or aerosol cleaners. Use soft and dry

cloth.

Ventilation

The slots and openings on the TV set are intended for

ventilation and to ensure reliable operation. To prevent

overheating, these openings must not be blocked or

covered in anyway.

Heat and Flames

The set should not be placed near to

open ﬂ ames and sources of intense heat

such as an electric heater. Ensure that

no open ﬂ ame sources, such as lighted

candles, are placed on top of the TV. Batteries should

not be exposed to excessive heat such as sunshine,

ﬁ re or the like.

Lightning

In case of storm and lightning or when

going on holiday, disconnect the power

cord from the wall outlet.

Replacement Parts

When replacement parts are required, make sure that

the service technician has used replacement parts,

which are speciﬁ ed by the manufacturer or have the

same speciﬁ cations as the original one. Unauthorized

substitutions may result in ﬁ re, electrical shock or

other hazards.

Servicing

Please refer all servicing to qualiﬁ ed

personnel. Do not remove the cover

yourself as this may result in an electric

shock.

Waste Disposal

Instructions for waste disposal:•

Packaging and packaging aids are recyclable and

should principally be recycled. Packaging materials,

such as foil bag, must be kept away from children.

Batteries, including those which are heavy metal-free,

should not be disposed of with household waste.

Please dispose of used battery in an environment

friendly manner. Find out about the legal regulations

which apply in your area.

• Don’t try to recharge batteries. Danger of explosion.

Replace batteries only with the same or equivalent

type.

This symbol on the product or on its

packaging means that your electrical

and electronic device should be

disposed at the end of its service

life separately from your household

wastes. There are separate collection

systems for recycling in EU. For more

information, please contact the local

authority or the dealer where you purchased the

product.

Disconnecting the Device

The mains plug is used to disconnect TV set from

the mains and therefore it must remain readily

operable.

Headphone Volume

Excessive sound pressure from earphones

and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely

attached to the wall in accordance with the installation

instructions when mounted to the wall (if the option

is available).

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 301_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 3 17.09.2010 18:45:0417.09.2010 18:45:04

English - 4 -

LCD Screen

The LCD panel is a very high technology product with

about a million thin ﬁ lm transistors, giving you ﬁ ne

picture details. Occasionally, a few non-active pixels

may appear on the screen as a ﬁ xed blue, green or

red point. Please note that this does not affect the

performance of your product.

Warning! Do not leave your TV in standby or operating

mode when you leave your house.

The Standby / On button doesn´t separate this

device completely from mains. Moreover the device

consumes power in the standby operation. In order to

separate the device completely from mains, the mains

plug has to be pulled from the mains socket. Because

of that the device should be set up in a way, that an

unobstructed access to mains socket is guaranteed,

so that in case of emergency the mains plug can be

pulled immediately. To exclude the danger of ﬁ re, the

power cord should principally be separated from the

mains socket prior to a longer period of non-usage,

i.e. during vacations.

Electrical device not in the hands of children

Never let children use electrical device unsupervised.

Children can´t always recognize properly the

possible dangers. Batteries / accumulators can be

life threatening when swallowed. Store batteries

unreachable for small children. In case of swallowing

a battery medical aid has to be sought immediately.

Also keep the packaging foils away from children.

There is danger of suffocation.

Licence Notiﬁ cation (optional)

Manufactured under license from Dolby

Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

Connection to a Television Distribution

System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the

building installation through the mains connection or

through other apparatus with a connection to protective

earthing-and to a television distribution system using

coaxial cable, may in some circumstances create a

ﬁ re hazard.

Connection to a cable distribution system has

therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11).

Package Contents

SCREEN

LANG

SUBTITLE

PIP

MENU

RETURN

OK

SOURCE

FAV

PRESETS

SLEEP

?

INFO

EPG

V+

V-

P-

P+

1

2

3

4

6

5

9

7 8

0

Remote

Control

LCD TV

Instruction Book

Note: You should check the accessories after

purchasing. Make sure that each accessory is

included.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 401_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 4 17.09.2010 18:45:0517.09.2010 18:45:05

English - 5 -

Environmental Information

• This television is designed to consume less energy to save environment.

You not only help to save the environment but also you can save money by reducing electricity bills thanks to the

energy efﬁ ciency feauture of this TV. To reduce energy consumption, you should take the following steps:

• You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On,

the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.

Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

• When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce

energy consumption.

• Disconnect power when going away for longer time.

• Note that annually, using the TV set in Power Save Mode has more power efﬁ ciency than disconnecting

the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains

plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode

setting to reduce your annual power consumption.

• Please helps us to save environment by following these steps.

Repair Information

Please refer all servicing to qualiﬁ ed personnel. Only qualiﬁ ed personnel must repair the TV. Please contact

your local dealer, where you have purchased this TV for further information.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 501_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 5 17.09.2010 18:45:0517.09.2010 18:45:05

English - 6 -

Remote Control Buttons

Standby1.

Mono/Stereo - Dual I-II / Currrent Language (*) 2.

(in DVB channels)

Image size / Zooms videos (in Media Browser 3.

video mode)

Green buttonList Schedule(in EPG)/Tag/Untag 4.

All(in favourite list)/Play-Slideshow(in Media

Browser)

Red button/Stop(in Media Browser)5.

Numeric buttons6.

Teletext / Mix(in TXT mode) 7.

Cursor Left 8.

Menu on-off9.

AV / Source selection10.

Favourite Mode Selection(in DVB channels)11.

Volume Up12.

Info / Reveal (in TXT mode)13.

Mute14.

Volume Down15.

Programme Down / Page up(in DVB channels)16.

Electronic programme guide(in DVB channels)17.

Programme Up / Page down(in DVB channels)18.

Sleep Timer19.

Picture mode selecion. / Changes picture mode 20.

(in Media Browser video mode)

Okay (Conﬁ rm) / Hold (in TXT mode)/ Edit 21.

Channel List

Cursor Down22.

Exit / Return / Index page (in TXT mode)23.

Cursor Right / Subpage (in TXT mode)24.

Cursor Up 25.

Previous programme26.

Yellow button/Pause (in Media Browser)/27.

Timeline Schedule(in EPG)

Blue button/Edit Channel List/Filter (İn Favourite 28.

List&EPG)/Loop-Shufﬂ e (in Media Browser)

No function29.

Subtitle on-off (in DVB channels)30.

V

SCREEN

LANG

SUBTITLE

PIP

MENU

RETURN

OK

SOURCE

SOURCE FAV

PRESETS

SLEEP

?

INFO

EPG

V+

V-

P-

P+

1

2

3

4

6

5

9

7 8

0

V

8

9

10

11

15

28

29

12

13

14

16

17

27

26

25

20

23

22

21

19

18

1

2

3

4

5

6

7

24

30

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 601_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 6 17.09.2010 18:45:0517.09.2010 18:45:05

English - 7 -

LCD TV and Operating Buttons

FRONT and REAR VIEW Control buttons VIEW Control Buttons

1. Standby/On button

2. TV/AV button

3. Programme Up/Down buttons

4. Volume Up/Down buttons

Note: Press “

” and

buttons at the same time to view

main menu.

Viewing the Back side Connections

SCART 21. inputs or outputs for external devices.

SCART 1 2. input or output for external devices. Connect the SCART cable between SCART socket on

TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV

mode.

Note: To connect external device,please use to supplied scart connection cable .

Component Video Inputs (YPbPr)3. are used for connecting component video.

You can connect the component video and audio sockets with a device that has component output.

Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and

the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,

“Pb”, “Pr” correspond with your device’s connectors.

PC/YPbPr Audio Inputs4. are used for connecting audio signals of a PC or a device that connects to the

TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output

of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio

outputs of your device to enable component audio.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 701_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 7 17.09.2010 18:45:0517.09.2010 18:45:05

English - 8 -

S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source.

Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input

RF Input6. connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device

to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

PC Input7. is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC

HDMI 1: HDMI Input8.

HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of

displaying High Deﬁ nition pictures from devices such as a High Deﬁ nition Satellite Receiver or DVD

Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets

can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI

connection.

HDMI 2: HDMI Input9.

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels 1.

that you subscribe to. For more information, see “Conditional Access” section.

Side USBs2.

Headphone jack is used for connecting an external headphone to the system. 3.

Connect to the HEADPHONE jack to listen to the TV from headphones (optional).

Video Input is used for connecting video signals of external devices.Connect the video 4.

cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.

Audio Inputs are used for connecting audio signals of external devices. Connect the audio 5.

cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device.

Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect your

device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •

mains. Plug the power cable to the mains socket outlet.

Aerial Connection

Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•

5Vdc-Max500mA

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 801_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 8 17.09.2010 18:45:0717.09.2010 18:45:07

English - 9 -

Using Digital Multimedia

Connectors

You can connect USB devices to your TV by using •

the USB inputs of the TV. This feature allows you

to display/play JPG, MP3 and video ﬁ les stored in

a USB stick.

It is possible that certain types of USB devices (e.g. •

MP3 Players) may not be compatible with this TV.

You may back up your ﬁ les before making any •

connections to the TV set in order to avoid any

possible data loss. Note that manufacturer will not

be responsible for any ﬁ le damage or data loss.

Do not pull out USB module while playing a ﬁ le.•

CAUTION: Quickly plugging and unplugging USB

devices, is a very hazardous operation. Especially,

do not repeatedly quickly plug and unplug the

drive. This may cause physical damage to the USB

player and especially the USB device itself.

SIDE VIEW USB MEMORY

USB Memory Connection

IMPORTANT: The TV should be switched off while

plugging or unplugging a USB device. Plug your

USB device to the USB inputs of the TV. You can

connect two usb device to your TV by using the USB

inputs of the TV at the same time.

Note: It is possible certain types of hard disk drives

are not supported.

Connecting the LCD TV to a PC

For displaying your computer’s screen image on your

LCD TV, you can connect your computer to the TV set.

Power off both computer and display before making

any connections. Use 15-pin D-sub display cable to

connect a PC to the LCD TV. When the connection

is made, switch to PC source. See “Input selection”

section. Set the resolution that suits your viewing

requirements. Resolution information can be found

in the appendix parts.

PC audio cable

(not supplied)

to AUDIO INPUTS

on the TV

PC RGB cable

(not supplied)

to PC input

Audio

Inputs

PC Input

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 901_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 9 17.09.2010 18:45:0917.09.2010 18:45:09

English - 10 -

Using Side AV Connectors

You can connect a range of optional equipment to

your LCD TV.

For connecting a camcorder, connect to the VIDEO •

IN socket and the AUDIO SOCKETS. Do not connect

the camcoder to VIDEO IN socket at the same time

since it can cause noise in the picture. For selecting

the related source, see the section “Input selection”

in the following parts.

To listen the TV sound from headphones, connect •

to the HEADPHONE jack of theTV.

Using Other Connectors

You can connect a range of optional equipment

to your LCD TV. Possible connections are shown

below. Note that cables shown in the illustration are

not supplied.

For connecting a to a device that has SPDIF support, •

use an appropriate SPDIF cable to enable sound

connection.

External Speakers

A device that

supports

SPDIF signal.

Remote Control Handset

Inserting Batteries

Remove the battery cover located on the back of •

the handset by gently pulling backwards from the

indicated part.

Insert two • AAA/R3 or equivalent type batteries

inside. Observe the correct polarity (+/-) when

inserting batteries and replace the battery cover.

+

-

Note: Remove the battery from remote control

handset when it is not to be used for a long period.

Otherwise it can be damaged due to any leakage of

batteries. Remote range is approximately 7m/23ft.

Connecting to a DVD Player

If you want to connect a DVD player to your LCD

TV, you can use connectors of the TV set. DVD

players may have different connectors. Please refer

to your DVD player’s instruction book for additional

information. Power off both the TV and the device

before making any connections.

Note: Cables shown in the illustration are not

supplied.

If your DVD player has an HDMI socket, you can •

connect via HDMI. When you connect to DVD player

as illustrated below, switch to HDMI source. See,

“Input Selection” section.

Most DVD players are connected through •

COMPONENT SOCKETS. Use a component video

cable to connect video input. For enabling audio,

use a component audio cable as illustrated below.

When the connection is made, switch to YPbPr

source. See, “Input selection” section.

You may also connect through the SCART 1 or •

SCART 2. Use a SCART cable as shown below.

Note: These three methods of connection perform the

same function but in different levels of quality. It is not

necessary to connect by all three methods.

HDMI

inputs

Scart sockets

Component

video

inputs

Component

audio

inputs

DVD Player

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1001_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 10 17.09.2010 18:45:1017.09.2010 18:45:10

English - 11 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC 50 Hz. •

Press STANDBY touch button. Then the standby •

LED lights up.

To switch on the TV from standby mode either:•

Press the “•

” button, P+ / P- or a numeric button on

the remote control.

Press the • -P/CH or P/CH+ touch button on the TV. The

TV will then switch on.

Note: If you switch on your TV via PROGRAMME UP/

DOWN buttons on the remote control or on the TV

set, the programme that you were watching last will be

reselected.

By either method the TV will switch on.

To Switch the TV Off

Press the “• ” button on the remote control or press

the STANDBY touch button on the TV, so the TV will

switch to standby mode.

To power down the TV completely, unplug the •

power cord from the mains socket.

Note: When the TV is switched to standby mode,

standby LED can blink to indicate that features such as

Standby Search, Over Air Download or Timer is active.

The LED can also blink when you switch on the TV from

standby mode.

Digital Teletext (** for UK only)

Press the “• ” button.

The digital teletext information appears.•

Operate it with the coloured buttons, cursor buttons •

and OK button.

The operation method may differ depending on the

contents of the digital teletext.

Follow the instructions displayed on digital teletext

screen.

When Press “• SELECT” button or similar message

appears on the screen, press the OK button.

When the “• ” button is pressed, the TV returns to

television broadcasting.

With digital terrestrial broadcasting (DVB-T), in •

addition to digital teletext broadcasting together with

the normal broadcasting, there are also channels

with just digital teletext broadcasting.

The aspect ratio (picture shape) when watching •

a channel with just digital teletext broadcasting is

the same as the aspect ratio of the picture viewed

previously.

When you press the “•

” button again, the digital

teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to

the analogue text system. Please do refer to the

“TELETEXT” explanations.

Input Selection

Once you have connected external systems to

your TV, you can switch to different input sources.

Press

“SOURCE” button on your remote control

consecutively for directly changing sources.

You can operate your TV using both the remote control

and onset buttons.

Operation with the Buttons on the TV

Volume Setting

Press “• ” button to decrease volume or

button to increase volume, so a volume level scale

(slider) will be displayed on the screen.

Programme Selection

Press “• P/CH +” button to select the next programme or

“P/CH -” button to select the previous programme.

Viewing Main Menu

Press the “• V+”/”V-” button at the same time to view

main menu. In the Main menu select sub-menu using

“AV” button and set the sub-menu using “

” or

“

” buttons. To learn the usage of the menus,

refer to the menu system sections.

AV Mode

Press the “• AV” button in the control panel on the TV

to switch between AV modes.

Operation with the Remote Control

The remote control of your TV is designed to control •

all the functions of the model you selected. The

functions will be described in accordance with the

menu system of your TV.

Volume Setting

Press “• V+” button to increase the volume. Press “V-”

button to decrease the volume. A volume level scale

(slider) will be displayed on the screen.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1101_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 11 17.09.2010 18:45:1017.09.2010 18:45:10

English - 12 -

Programme Selection (Previous or Next

Programme)

Press “• P -” button to select the previous

programme.

Press “• P +” button to select the next programme.

Programme Selection (Direct Access)

Press numeric buttons on the remote control to select •

programmes between 0 and 9. The TV will switch

to the selected programme. To select programmes

between, press the numeric buttons consecutively.

When the pressing time is due for the second

numeric button, only the ﬁ rst digit programme will

be displayed. Press directly the programme number

to reselect single digit programmes.

Viewing Electronic Programme

Guide (EPG)

You can view the electronic programme guide (EPG)

to view information about available programmes.To

view the EPG menu please press EPG button on the

remote control.

Press “•

”/“ ” buttons to navigate through

channels.

Press “•

”/“ ” buttons to navigate through the

programme list.

EPG• menu displays available information on all

channels.

Please note that event information is updated •

automatically. If there are no event information

data available for channels, EPG will be displayed

with blanks.

OK (Options): Displays programme options including

“Select Channel” option.

INFO (Event Details): Displays the programmes in

detail.

Green button: Programme schedule will be listed

Yellow button: Display EPG data in accordane with

timeline schedule

Blue button (Filter): Views ﬁ ltering options.

Red button (Prev Time Slice): Displays the

programmes of previous time slice.

Green button (Next Time Slice): Displays the

programmes of the next time slice.

Yellow button (Prev Day): Displays the programmes

of previous day.

Blue button (Next day): Displays the programmes

of the next day.

Numeric buttons (Jump): Jumps to the preferred

channel directly via numeric buttons.

OK (Options): Displays programme options including

“Select Channel” option.

Text button (Filter): Views ﬁ ltering options.

INFO (Details): Displays the programmes in detail.

Red button (Prev Day): Displays the programmes

of previous day.

Green button (Next day): Displays the programmes

of the next day.

Yellow button (Zoom): Expands programme

information.

Blue button (Filter): Views ﬁ ltering options.

INFO (Details): Displays the programmes in detail.

Numeric buttons (Jump): Jumps to the preferred

channel directly via numeric buttons.

OK (Options): Displays programme options including

“Select Channel” option.

Text (Search): Displays “Guide Search” menu.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1201_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 12 17.09.2010 18:45:1117.09.2010 18:45:11

English - 13 -

SUBTTL: Press SUBTTL button to view Select

Genre menu. Using this feature, you can search the

programme guide database in accordance with the

genre. Info available in the programme guide will

be searched and results matching your criteria will

be listed.

(Now) : Shows the current programme.

First Time Installation

IMPORTANT: Ensure that the aerial is connected

before switching on the TV for the first time

installation.

First, you will be asked to set and conﬁ rm a PIN

number. Selected PIN number cannot be 0000. Enter

a PIN number and conﬁ rm it by entering once more.

Press OK button to continue. If the two PIN numbers

match, your master PIN number will be set.

When the TV is operated for the ﬁ rst time, installation •

wizard will guide you through the process. Next,

language selection screen will be displayed:

Use “• ” or “ ” buttons to select your language

and press OK button to set selected language and

continue.

After selecting the language, “• Welcome!” screen will

be displayed, requiring you to set Country,Teletext

Language and Scan Encrypted options.

By pressing “• ” or “ ” button, select the country

you want to set and press “ ” button to highlight

Teletext Language option. Use “ ” or “ ” button

to select desired Teletext Language.

Press “• ” button after setting Teletext Language

option. Scan Encrypted will be then highlighted.

You can set Scan Encrypted as Yes if you want to

scan coded stations.Afterwards select the desired

Teletext Language.

Press • OK button on the remote control to continue

and the following message will be displayed on the

screen:

To select the “Yes” or “No” option, highlight the item by

using “

” or “ ” buttons and press OK button.

Afterwards, the following OSD will be displayed on the

screen and the digital television will search for digital

terrestrial TV broadcasts

Note: You can press “MENU” button to cancel.

After all the available stations are stored, Channel •

List will be displayed on the screen. If you like the

sort channels, according to the LCN,please select

“Yes” and than press “OK”.

Press • OK button to quit channel list and watch TV.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1301_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 13 17.09.2010 18:45:1117.09.2010 18:45:11

English - 14 -

Auto Tuning

HINT: Auto tuning feature will help you to retune the TV

set in order to store new services or stations.

Press “MENU” button on the remote control and

select Installation by using “

” or “ ” button. Press

OK button and the following menu screen will be

displayed.

Select Automatic Channel Scan by using “ ”/“ ”

button and press OK button. Automatic Channel Scan

options will be displayed. You can select Digital Aerial,

Analog or Digital Aerial-Analogue tuning using “ ”/“

” and OK buttons.

Auto Channel Scan Menu Operation

Digital: Searches and stores aerial DVB stations.

Analogue: Searches and stores analog stations.

Full: Searches and stores both analog and aerial

DVB stations.

Whenever you select an automatic search type and •

press OK button, a conﬁ rmation screen will appear

on the screen. To start installation process, select

Yes, to cancel select No by using .“

” or “ ” and

OK button.

After auto channel scan type is set and selected •

and conﬁ rmed, installation process will start and

progress bar will move along. Press “MENU” button

to cancel process. In such a case, located channels

are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast

entry.

Select • Manual Channel Scan from the Installation

menu by using “

”/“ ” and OK buttons. Manual

Scan options screen will be displayed.

Select the desired • Search Type using “

” or “

” button. Manual search options will change

accordingly. Use “ ”/“ ” button to highlight an item

and then press “ ” or “ ” button to set an option.

You can press “MENU” button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex

or frequency are entered manually and only that

multiplex or frequency are searched for the channels.

After selecting search type as Digital, you can enter

the multiplex or frequency number using the numeric

buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use

“ ”/“ ” button to highlight an item and then press “

” or “ ” button to set an option.

Enter the channel number or frequency using the

numeric buttons. You can then press OK button

to search. When the channel is located, any new

channels that are not on the list will be stored.

Analog Fine Tune

Select • Analog Fine Tune from the Installation menu

by using “ ” or “ ” and OK buttons. Analog ﬁ ne tune

screen will be displayed. Analog Fine Tune feature

will not be available if there are no analog channels,

digital channels and external sources stored.

Press • OK button to proceed. Use “

” or “ ” button

to set Fine Tune. When ﬁ nished, press OK button

again.

First Time Installation

Select First Time Installation line and press OK button.

Enter the PIN number you have previously set during

the ﬁ rst time installation. If the correct PIN number is

entered, installation process will start.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1401_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 14 17.09.2010 18:45:1217.09.2010 18:45:12

English - 15 -

See the section, “First Time Installation” at the

beginning of instruction book for more information

on the process.

Clear Service List (*)

(*) This setting is visible only when the Country option

is set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “

” or

“

” button to select Clear Service List and then press

OK. The following OSD message will be displayed

on the screen:

Press OK to cancel. Select Yes by pressing “ ” or “ ”

button and press OK to delete all of the channels.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel List

options.

Press • “MENU” button to view main menu. Select

Channel List item by using “

” or “ ” button. Press

OK to view menu contents.

Select Edit Channel List to manage all stored

channels. Use “ ” or “ ” and OK buttons to select

Edit Channel List.

Operating the Channel List

Press “• ” or “ ” button to select the channel that

will be processed. Press “ ” or “ ” button to select

a function on Channel List menu.

Use • P+/P- buttons to move page up or down.

Press • BLUE button to view ﬁ ltering options.

Press • “MENU” button to exit.

Moving a Channel

First select the desired channel. Select Move option •

in the channel list and press OK button.

Edit Number screen will be displayed. Enter the •

desired channel number by using the numeric

buttons on the remote control. If there is a previously

stored channel on that number, a warning screen

will be displayed. Select Yes if you want to move the

channel and press OK.

Press • OK button to process. Selected channel is

now moved.

Deleting a Channel

You can press GREEN button to tag/untag all

channels; YELLOW button to tag/untag channel.

Select the channel that you want to delete and select •

Delete option. Press OK button to continue.

A warning screen will appear. Select • YES to delete,

select No to cancel. Press OK button to continue.

Renaming a Channel

Select the channel that you want to rename and •

select Edit Name option. Press OK button to

continue.

Pressing “•

” or “ ” button moves to the previous/

next character. Pressing “ ” or “ ” button toggles

the current character, i.e., ‘b’ character becomes ‘a’

by “ ” and ‘c’ by “ ”. Pressing the numeric buttons

‘0...9’ replaces the highlighted character with the

characters printed above the button one by one as

the button is pressed.

When ﬁ nished, press • OK button to save. Press

“MENU” to cancel.

Locking a Channel

You can press GREEN button to tag/untag all

channels; YELLOW button to tag/untag a single

channel.

Select the channel that you want to lock and select •

Lock option. Press OK button to continue.

You will be asked to enter parental control PIN that •

you have previously deﬁ ned during the ﬁ rst time

installation.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1501_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 15 17.09.2010 18:45:1217.09.2010 18:45:12

English - 16 -

Press • OK button when the desired channel is

highlighted to lock/unlock the channel. Lock symbol

will be displayed next to the selected channel.

Managing Stations: Favourites

You can create a list of favourite programmes.

Press • “MENU” button to view main menu. Select

Channel List item by using “

” or “ ” button. Press

OK to view menu contents.

Select • Favourites to manage favourite list. Use “

”/“ ” and OK buttons to select Favourites.

You can set various channels as favourites so that •

only the favourite channels are navigated.

Select a channel by using “• ” or “ ” button. Press

OK button to add selected channel to favourites list.

Press OK button again to remove.

Button Functions

OK• : Add/remove a station.

YELLOW• : Tag/untag a channel.

GREEN• : Tag/untag all channels.

BLUE• : Displays ﬁ ltering options.

Managing Stations: Sorting

Channel List

You can select broadcasts to be listed in the channel

list. To display speciﬁ c types of broadcast, you should

use Active channel list setting.

Select Active channel list from the Channel list

menu by using “

” or “ ” button. Press OK button

to continue.

You can select a broadcast type option from the list

by using “

” /“ ” and OK buttons.

On-Screen Information

You can press “INFO” button to display on-screen

information. Details of the station and current

programme will be displayed on the information

banner.

The information banner gives information on the

channel selected and the programmes on it. The name

of the channel is displayed, along with its channel

list number.

Hint: Not all channels broadcast the programme

data. If the name and time of the programme are not

available, then information banner will be displayed

with blanks.

If the selected channel is locked, you must enter the

correct four-digit numeric code to view the channel

(If you have forgotten the PIN number you have set

during the ﬁ rst time installation, you should use the

master PIN code, 4725.). “Enter PIN” will be displayed

on the screen in such a case:

Media Playback Using Media

Browser

If the USB stick is not recognized after power off/on

or First Time Installation, ﬁ rst, plug the USB device

out and power off/on the TV set. Plug the USB device

in again.

To display Media Browser window, press either

“MENU” button on the remote control and then select

Media Browser by pressing “

” or “ ” button. Press

OK button to continue. Media Browser menu options

will be displayed.

Also, when you plug USB devices, media browser

screen will be displayed automatically:

You can play music, picture and video ﬁ les from the

connected USB memory stick. Use “ ” or “ ” button

to select Videos, Photos, Music or Settings.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1601_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 16 17.09.2010 18:45:1317.09.2010 18:45:13

English - 17 -

You can connect two USB devices to your TV. If both

USB devices include music, picture or video ﬁ les, USB

selection osd will be displayed on the screen. The

ﬁ rst USB device connected to the TV will be named

as USB Drive1.

Select a device by using “ ” or “ ” button and press

OK.

Viewing Videos via USB

When you select Videos from the main options,

available video ﬁ les will be ﬁ ltered and listed on this

screen. You can use “ ” or “ ” button to select a video

ﬁ le and press OK button to play a video. If you select

a subtitle ﬁ le and press OK button, you can select or

deselect that subtitle ﬁ le. The following menu will be

displayed while playing a video ﬁ le:

Play (RED button): Starts the video playback.

Stop (BLUE button): Stops the video playback.

Pause (OK button): Pause the video playback.

Rewind ( button): Goes backward.

Forward (

button): Goes forward.

Subtitle/Audio (LANG. button): Sets subtitle/Audio.

Yellow: Opens subtitle time correction menu

Press RETURN button to switch back to previous

menu.

Viewing Photos via USB

When you select Photos from the main options,

available image ﬁ les will be ﬁ ltered and listed on this

screen.

Jump (Numeric buttons):Jump to selected ﬁ le using

the numeric buttons.

OK: Views the selected picture in full screen.

Slideshow (GREEN button): Starts the slideshow

using all images.

Loop/Shufﬂ e (BLUE button): Press once to enable

Loop. Press again to enable both Loop and Shufﬂ e.

Press once more to enable only Shufﬂ e. Press again

to disable all. You can follow the disabled functions

with the change of the icons.

FAV: Sorts ﬁ les by date.

TEXT: Views images in thumbnails.

INFO: Changes ﬁ lter options.

Slideshow Options

Pause (YELLOW button) : Pauses the slideshow.

Continue (GREEN button) : Continues the

slideshow.

Previous/Next (Left/Right buttons): Jumps to

previous or next ﬁ le on slideshow.

Rotate (Up/Down buttons): Rotates the image using

up/down buttons.

Loop/Shufﬂ e (BLUE button): Press once to disable

Loop. Press again to disable both Loop and Shufﬂ e.

Press once more to enable only Shufﬂ e. Press again

to enable all. You can follow the disabled functions

with the change of the icons.

RETURN : Back to ﬁ le list.

INFO: Displays help screen.

Viewing Music via USB

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1701_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 17 17.09.2010 18:45:1317.09.2010 18:45:13

English - 18 -

When you select Music from the main options,

available audio ﬁ les will be ﬁ ltered and listed on this

screen.

0..9 (Numeric buttons): Jumps to the selected ﬁ le.

Play This (OK button) : Plays the selected ﬁ le.

Play (GREEN button) : Plays all media ﬁ les starting

with the selected one.

Stop (RED button) : Stops playback.

Pause (YELLOW button) : Pauses the selected

playback.

Previous/Next (Left/Right buttons) : Jumps to

previous or next ﬁ le to play.

FAV: Sorts ﬁ les by Title,Artist or Album..

INFO: Changes ﬁ lter options.

Loop/Shufﬂ e (BLUE button): Press once to disable

Loop. Press again to disable both Loop and Shufﬂ e.

Press once more to enable only Shufﬂ e. Press again

to enable all. You can follow the disabled functions

with the change of the icons.

Media Browser Settings

You can set your Media Browser preferences by

using the Settings dialog. Press “ ” or “ ” button to

highlight an item and use “ ” or “ ” button to set.

View Style: Sets default browsing mode.

Slide Show Interval: Sets slide show interval time.

Show Subtitle: Sets subtitle enabling preference.

Subtitle Position: Sets subtitle position as up or

down.

Subtitle Font Size: Sets subtitle font size (max.

54pt).

Changing Image Size: Picture

Formats

Programmes can be watched in different picture •

formats, depending on the transmission received.

You can change the aspect ratio (image size) of •

the TV for viewing the picture in different zoom

modes.

Press •

“SCREEN” button repeatedly to change

the image size. Available zoom modes are listed

below.

Auto

When a WSS (Wide Screen Signalling) signal, which

shows the aspect ratio of the picture, is included in

the broadcast signal or the signal from an external

device, the TV automatically changes the ZOOM

mode according to the WSS signal.

When the • AUTO mode does not function correctly

due to poor WSS signal quality or when you want to

change the ZOOM mode, change to another ZOOM

mode manually.

16:9

This uniformly stretches the left and right sides of a

normal picture (4:3 aspect ratio) to ﬁ ll the wide TV

screen.

For 16:9 aspect ratio pictures that have been •

squeezed into a normal picture (4:3 aspect ratio),

use the 16:9 mode to restore the picture to its

original shape.

Subtitle

This zooms up the wide picture (16:9 aspect ratio)

with subtitles to the full screen.

Note: You can shift to screen up or down by pressing

“ ” / “ ” buttons while picture zoom is selected as

panaromic, 14:9 Zoom, Cinema or Subtitle.

01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 1801_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 18 17.09.2010 18:45:1417.09.2010 18:45:14

La page charge ...

CONTINENTAL EDISON 94FHD905V Operating Instructions Manual

CONTINENTAL EDISON 94FHD905V Operating Instructions Manual

dans d''autres langues

Autres documents