Techwood VL19TV1001 Operating Instructions Manual

VL19TV1001

OPERATING INSTRUCTIONS

MODE D'EMPLOI

COLOUR TELEVISION WITH REMOTE CONTROL

TELEVISEUR COULEUR A TELECOMMANDE

www.vestel-france.fr

English - 1 -

Contents

TV Setup ........................................................... 15

Setup ................................................................ 15

Media Browser .................................................. 19

Playing MP3 Files ............................................. 19

Viewing JPG Files ............................................. 19

Slideshow Options ............................................ 20

Video Playback ................................................. 20

Analogue TV Menu System .................................. 20

Picture Menu..................................................... 20

Sound Menu ..................................................... 21

Feature Menu ................................................... 21

Source Menu .................................................... 22

Install Menu ...................................................... 22

Program Table .................................................. 23

PC-VGA Mode Menu System ............................... 24

PC-VGA Position Menu .................................... 24

Displaying TV Information .................................... 24

Mute Function ....................................................... 24

Muting Speakers .............................................. 24

Muting the Headphones.................................... 24

Picture Mode Selection......................................... 24

Zoom Modes......................................................... 25

Auto .................................................................. 25

16:9 ................................................................... 25

4:3 ..................................................................... 25

Teletext ................................................................. 25

Tips ....................................................................... 26

Image Persistence ............................................ 26

No Power .......................................................... 26

Poor Picture ...................................................... 26

No Picture ......................................................... 26

Sound ............................................................... 26

Remote Control................................................. 26

Input Sources.................................................... 26

Appendix A: PC Input Typical Display Modes ....... 27

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 28

Appendix C: Supported File Formats for USB

Mode..................................................................... 29

Speciﬁ cations ....................................................... 30

Package Contents .................................................. 2

Features ................................................................. 2

Introduction ............................................................. 2

Preparation ............................................................. 3

Safety Precautions ................................................. 3

Power Source ..................................................... 3

Power Cord ......................................................... 3

Moisture and Water ............................................ 3

Cleaning.............................................................. 3

Ventilation ........................................................... 3

Heat and Flames ................................................ 3

Lightning ............................................................. 3

Replacement Parts ............................................. 3

Servicing ............................................................. 3

Waste Disposal ................................................... 3

Information for Users in European Union

Countries ............................................................ 4

Disconnecting the Device ................................... 4

Headphone Volume ............................................ 4

Installation........................................................... 4

LCD Screen ........................................................ 4

Warning .............................................................. 4

Connection to a Television Distribution System

(Cable TV etc.) from Tuner ................................. 4

Overview of the Remote Control ............................ 5

LCD TV and Operating Buttons .............................. 6

Viewing the Connections- Back Connectors .......... 6

Viewing the Connections - Side Connectors .......... 7

Power Connection .................................................. 7

Aerial Connection ................................................... 7

Connecting the LCD TV to a PC ............................. 8

Using Side USB Input ............................................. 8

USB Memory Connection ................................... 8

Connecting to a DVD Player................................... 9

Using Side AV Connectors ..................................... 9

Connecting Other Equipment via Scart .................. 9

Inserting Batteries into the Remote Control.......... 10

Switching the TV On/Off ....................................... 10

To Switch the TV On ......................................... 10

To Switch the TV Off ......................................... 10

Input Selection ...................................................... 10

Basic Operations .................................................. 10

Operation with the Buttons of the TV ................ 10

Operation with the Remote Control ...................11

Initial Settings ........................................................11

General Operation .................................................11

Electronic Programme Guide (EPG) .................... 12

Displaying Subtitles .......................................... 12

Digital Teletext (** for UK only) ......................... 12

Analogue Teletext ............................................. 12

Widescreen ....................................................... 12

IDTV Menu System .............................................. 13

Channel List ...................................................... 13

Timers ............................................................... 14

Conditional Access ........................................... 15

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 101_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1 05.11.2010 10:26:4905.11.2010 10:26:49

English - 2 -

Package Contents

EXIT

/

GUIDE

WIDE

ABC

DEF

GHI

JKL MNO

PQR

STU

VWX

YZ

M

P<P

TV

DTV

i

I-II

INFO

--

VP

++

-/--

PP

0

1

2

3

4

5

6

7

8

9

PC

OK

Remote

Control

LCD TV

Instruction Book

Note: You should check the accessories after purchasing.

Make sure that each accessory is included.

Features

• Remote controlled colour LCD TV.

• Fully integrated digital TV (DVB-T).

• HDMI connectors for digital video and audio. This

connection is also designed to accept high deﬁ nition

signals.

• 200 programmes from VHF, UHF(analogue).

• 500 programmes for digital mode (IDTV).

• OSD menu system.

• Scart socket for external devices (such as video,

video games, audio set, etc.).

• Stereo sound system.

• 10 page Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• When no valid signal is detected, after 5 minutes the

TV switches automatically to standby mode.

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, Windows 7, ME, 2000,

XP, Vista, Windows 7.

• Game Mode.

Introduction

Thank you for choosing this product. This manual will

guide you for the proper operation of your

TV. Before operating the TV, please read

this manual thoroughly.

Please do keep this manual in a safe place

for future references.

This device is intended to receive and display TV

programs. The different connection options make

an additional expansion of the reception and display

sources possible (receiver, DVD player, DVD

recorder,VCR, PC etc.). This device is only suitable

for the operation in dry interiors.

This appliance is intended solely for private domestic

use and may not be used for industrial and commercial

purposes. We exclude liability in principle, if the device

is not used as intended, or unauthorized modiﬁ cations

have been made. To operate your LCD-TV in extreme

ambient conditions may cause the damage of the

device.

Please read the corresponding instructions of this

handbook prior to the ﬁ rst usage of the device, even

when the usage of electronic devices is familiar

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 201_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 2 05.11.2010 10:26:5105.11.2010 10:26:51

English - 3 -

Cleaning

Before cleaning, unplug the TV set from

the wall outlet. Do not use liquid or aerosol

cleaners. Use soft and dry cloth.

Ventilation

The slots and openings on the TV set are intended for

ventilation and to ensure reliable operation. To prevent

overheating, these openings must not be blocked or

covered in anyway.

Heat and Flames

The set should not be placed near to open

ﬂ ames and sources of intense heat such

as an electric heater. Ensure that no open

ﬂ ame sources, such as lighted candles,

are placed on top of the TV. Batteries

should not be exposed to excessive heat

such as sunshine, ﬁ re or the like.

Lightning

In case of storm and lightning or when

going on holiday, disconnect the power

cord from the wall outlet.

Replacement Parts

When replacement parts are required, make sure that

the service technician has used replacement parts,

which are speciﬁ ed by the manufacturer or have the

same speciﬁ cations as the original one. Unauthorized

substitutions may result in ﬁ re, electrical shock or

other hazards.

Servicing

Please refer all servicing to qualified

personnel. Do not remove the cover

yourself as this may result in an electric

shock.

Waste Disposal

Instructions for waste disposal:

• Packaging and packaging aids are recyclable and

should principally be recycled. Packaging materials,

such as foil bag, must be kept away from children.

• Batteries, including those which are heavy metal-

free, should not be disposed of with household

waste. Please dispose of used battery in an

environment friendly manner. Find out about the

legal regulations which apply in your area. Don’t try

to recharge batteries. Danger of explosion. Replace

batteries only with the same or equivalent type.

• Cold cathode fluorescent lamp in LCD PANEL

contains a small amount of mercury; please follow

the local laws or regulations for disposal.

to you. Notice especially the chapter SAFETY

PRECAUTIONS. Carefully keep the handbook as

future reference. When selling the device or giving it

away, absolutely give these direction for use.

Preparation

For ventilation, leave a free space of at least 10 cm

all around the set. To prevent any fault and unsafe

situations, please do not place any objects on top

of the set.

Use this device in moderate climates.

10 cm

Safety Precautions

Read the following recommended safety

precautions carefully for your safety.

Power Source

The TV set should be operated only from a 220-240

V AC, 50 Hz outlet. Ensure that you select the correct

voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on the

power cord (mains lead) or pinch the cord. Handle the

power cord by the plug. Do not unplug the appliance

by pulling from the power cord and never touch the

power cord with wet hands as this could cause a short

circuit or electric shock. Never make a knot in the cord

or tie it with other cords. The power cords should be

placed in such a way that they are not likely to be

stepped on. A damaged power cord can cause ﬁ re or

give you an electric shock. When it is damaged and

needs to be replaced, it should be done by qualiﬁ ed

personnel.

Moisture and Water

Do not use this device in a humid and

damp place (avoid the bathroom, the

sink in the kitchen, and near the washing

machine). Do not expose this device to

rain or water, as this may be dangerous

and do not place objects ﬁ lled with liquids,

such as ﬂ ower vases, on top. Avoid from

dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug

the TV and have it checked by qualiﬁ ed personnel

before operating it any further.

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 301_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 3 05.11.2010 10:26:5105.11.2010 10:26:51

English - 4 -

Information for Users in European

Union Countries

This symbol on the product or on its

packaging means that your electrical

and electronic device should be

disposed at the end of its service

life separately from your household

wastes. There are separate collection

systems for recycling in EU.

For more information, please contact the local

authority or the dealer where you purchased the

product.

Disconnecting the Device

The mains plug is used to disconnect TV set from

the mains and therefore it must remain readily

operable.

Headphone Volume

Excessive sound pressure from earphones

and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely

attached to the wall in accordance with the installation

instructions when mounted to the wall (if the option

is available).

LCD Screen

The LCD panel is a very high technology product with

about a million thin ﬁ lm transistors, giving you ﬁ ne

picture details. Occasionally, a few non-active pixels

may appear on the screen as a ﬁ xed blue, green or

red point. Please note that this does not affect the

performance of your product.

Warning

Do not leave your TV in standby or operating mode

when you leave your house.

Connection to a Television

Distribution System (Cable TV etc.)

from Tuner

Device connected to the protective earthing of the

building installation through the mains connection or

through other apparatus with a connection to protective

earthing-and to a television distribution system using

coaxial cable, may in some circumstances create a

ﬁ re hazard.

Connection to a cable distribution system has

therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11).

The Standby / On button doesn´t separate this

device completely from mains. Moreover the device

consumes power in the standby operation. In order to

separate the device completely from mains, the mains

plug has to be pulled from the mains socket. Because

of that the device should be set up in a way, that an

unobstructed access to mains socket is guaranteed,

so that in case of emergency the mains plug can be

pulled immediately. To exclude the danger of ﬁ re, the

power cord should principally be separated from the

mains socket prior to a longer period of non-usage,

i.e. during vacations.

Electrical device not in the hands of children

Never let children use electrical device

unsupervised.

Children can´t always recognize properly the possible

dangers.

Batteries / accumulators can be life threatening when

swallowed. Store batteries unreachable for small

children. In case of swallowing a battery medical

aid has to be sought immediately. Also keep the

packaging foils away from children. There is danger

of suffocation.

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 401_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 4 05.11.2010 10:26:5105.11.2010 10:26:51

English - 5 -

Overview of the Remote Control

Standby1.

Current language (in DTV mode) (*)//Feature 2.

menu

Favourite mode (in DTV mode) (*) / Install menu3.

Previous programme 4.

Cursor up5.

Cursor right6.

Cursor down7.

TV / Digital TV8.

Mono/Stereo - Dual I-II 9.

Programme up/ (Page down in DTV mode) / 10.

Programme down/ (Page up in DTV mode)

Numeric buttons11.

Exit (in DTV mode)12.

Hold (in TXT mode) 13.

Update (in TXT mode) 14.

Index page (in TXT mode) / Electronic 15.

Programme Guide (EPG) (in DTV mode)

Reveal (in TXT mode) / Switch from TV to PC 16.

Picture menu / Page down / Subtitle on-off (in 17.

DTV mode) (*)

Sound menu / Page up / Channel list (*)(in DTV 18.

mode)

Menu on/off19.

OK / Select (analogue TV mode) / Channel list 20.

(in DTV mode) /

Cursor Left21.

AV / Source22.

Info23.

Volume up/down24.

Mute25.

Picture mode selection26.

Time / Subpage (in TXT mode) / Subtitle on-off 27.

(**)

Teletext on-off 28.

Mix (in TXT mode) 29.

Expand (in TXT mode) / Image size30.

(*) available for EU countries.

(**) available for UK country option.

EXIT

/

GUIDE

WIDE

ABC

DEF

GHI

JKL MNO

PQR

STU

VWX

YZ

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

M

P<P

TV

DTV

i

I-II

INFO

--

VP

++

-/--

PP

0

1

2

3

4

5

6

7

8

9

PC

OK

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 501_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 5 05.11.2010 10:26:5205.11.2010 10:26:52

English - 6 -

LCD TV and Operating Buttons

FRONT and REAR VIEW SIDE VIEW Control Buttons

Up button1.

Down button2.

Programme/Volume / AV 3.

selection button

Standby / On button4.

Note:You can use “+/-” buttons to

change volume. If you want to change

channels, press P/V/AV button once

and then use “+/-” buttons. If you hold

the P/V/AV button about a few seconds,

source OSD will be displayed. Main

menu OSD cannot be displayed via

control buttons.

Viewing the Connections- Back Connectors

SCART socket inputs or outputs for external devices.1.

Connect the SCART cable between SCART socket on TV and

SCART socket on your external device (such as a VCR or a DVD

player).

Note: If an external device is connected via the SCART socket,

the TV will automatically switch to AV mode.

PC Input is for connecting a personal computer to the TV set. 2.

Connect the PC cable between the PC-VGA INPUT on the TV

and the PC output on your PC. Component Video Inputs (YPbPr)

are used for connecting component video.

You can use PC-VGA input to enable YPbPr signal connection

with a device that has component output. Connect the YPbPr to

PC cable between the PC INPUT on the TV and the component video outputs of your device.

SPDIF Coaxial Out3. outputs digital audio signals of the currently watched source. Dolby D Audio is

bypassed while in media browser mode only.

RF Input connects to an antenna or a cable system.4.

Note that if you use a media recorder, you should connect the aerial cable through the device to the

television with an appropriate antenna cable, as shown in the illustration in the following pages.

5. HDMI 1: HDMI 1 input

HDMI Input is for connecting a device that has an HDMI socket.

Your LCD Television is capable of displaying High Deﬁ nition pictures from devices such as a High

Deﬁ nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets

or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p

(Optional) signals. No sound connection is needed for an HDMI to HDMI connection.

When you use the wall mount kit (optional) with the LCD TV, we would deﬁ nitely recommend to plug all your cables into the

back of the LCD before mounting to the wall.

SPDIF

SCART

VGA

Coax.OUT

HDMI 1

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 601_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 6 05.11.2010 10:26:5205.11.2010 10:26:52

English - 7 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the 1.

channels that you subscribe to. For more information, see “Conditional Access”

section.

USB Input (functional in DTV mode only2.

Video Input is used for connecting video signals of external devices.Connect 3.

the video cable between the VIDEO IN socket on the TV and the VIDEO OUT

jack on your device.

Audio Inputs are used for connecting audio signals of external devices. 4.

Connect the audio cable between the AUDIO INPUTS on the TV and the

AUDIO OUTPUT jacks on your device.

Also to enable PC/YPbPr sound connection in such a case, use an

appropriate audio cable between the connected device’s audio outputs and the

TV’s audio inputs

Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable you

should also connect your device with an audio cable to the AUDIO INPUTS of

the TV to enable audio.

Headphone jack is used for connecting an external headphone to the system. 5.

Connect to the HEADPHONE jack to use headphones.

Power Connection

IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the

mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

SPDIF

SCART

VGA

Coax.OUT

HDMI 1

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 701_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 7 05.11.2010 10:26:5305.11.2010 10:26:53

English - 8 -

Connecting the LCD TV to a

PC

For displaying your computer’s screen image on

your LCD TV, you can connect your computer to the

TV set.

• Power off both computer and display before making

any connections.

• Use 15-pin D-sub display cable to connect a PC

to the LCD TV. Use an audio cable between audio

inputs of the TV (side) and audio output of your PC

to enable sound connection.

• When the connection is made, switch to PC-VGA

source. See “Input selection” section.

• Set the resolution that suits your viewing requirements.

Resolution information can be found in the appendix

parts.

SPDIF

SCART

VGA

Coax.OUT

HDMI 1

PC audio cable

(not supplied)

to AUDIO INPUTS

on the TV

PC RGB cable

(not supplied)

to PC input

Audio

Inputs

PC Input

Using Side USB Input

• You can connect USB devices to your TV by using

the USB input of the TV. This feature allows you to

display/play music,photo or video ﬁ les stored in a

USB stick.

• It is possible that certain types of USB devices (e.g.

MP3 Players) may not be compatible with this TV.

• You may back up your ﬁ les before making any

connections to the TV set in order to avoid any

possible data loss. Note that manufacturer will not

be responsible for any ﬁ le damage or data loss.

• The TV supports only FAT32 disk formatting. NTFS

format is not supported. If you connect a USB disk

with NTFS format, “usb is unformetted” osd will

be displayed.

• Do not pull out USB module while playing a ﬁ le.

CAUTION: Quickly plugging and unplugging

USB devices, is a very hazardous operation.

Especially, do not repeatedly quickly plug

and unplug the drive. This may cause

physical damage to the USB player and

especially the USB device itself .

USB Memory Connection

• Plug your USB device to the USB input of the

TV.

Note: USB hard disk drives are not supported.

5Vdc-Max:500mA

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 801_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 8 05.11.2010 10:26:5405.11.2010 10:26:54

English - 9 -

Connecting to a DVD Player

If you want to connect a DVD player to your LCD

TV, you can use connectors of the TV set. DVD

players may have different connectors. Please refer

to your DVD player’s instruction book for additional

information. Power off both the TV and the device

before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can

connect via HDMI. When you connect to DVD player

as illustrated below, switch to HDMI source. See,

“Input Selection” section.

• Most DVD players are connected through

COMPONENT SOCKETS. YPbPr can be used

only when you connect a device that has a YPbPr

output through the PC input with YPbPr to PC cable.

To enable sound connection, use AUDIO IN located

side of the TV (YPbPr cable is not supplied).

• When the connection is made, switch to YPbPr

source. See, “Input selection” section.

• You may also connect through the SCART socket.

Use a SCART cable as shown below.

HDMI

input

Scart socket

YPbPr to PC

cable (optional)

Component

audio

inputs

DVD Player

Note : These methods of connection perform the same

function but in different levels of quality. It is not necessary

to connect by all three methods.

Using Side AV Connectors

You can connect a range of optional equipment

to your LCD TV. Possible connections are shown

below. Note that cables shown in the illustration are

not supplied.

• For connecting a camcorder, connect to the VIDEO

IN socket and the AUDIO SOCKETS. For selecting

the related source, see the section “Input selection”

in the following parts.

• To listen the TV sound from headphones, connect

to the HEADPHONE jack of theTV.

Camcorder

Headphone

Connecting Other Equipment

via Scart

Most devices support SCART connection. You can

connect a; DVD recorder or a VCR to your LCD TV by

using the SCART socket. Note that cables shown in

the illustration are not supplied. Power off both the TV

and the devices before making any connections.

For more information, refer to your device’s own

instruction book.

SCART socket

Decoder

DVD Recorder

Video Recorder

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 901_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 9 05.11.2010 10:26:5505.11.2010 10:26:55

English - 10 -

Inserting Batteries into the

Remote Control

• Remove the battery cover located on the back of

the remote control by gently pulling backwards from

the indicated part.

• Insert two AAA/R3 or equivalent type batteries

inside.Observe the correct polarity (+/-) when

inserting batteries and replace the battery cover.

Note : Remove the battery from remote control when it is not

to be used for a long period. Otherwise it can be damaged

due to any leakage of batteries.

Switching the TV On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC, 50

Hz.

• Then the standby LED lights up.

To switch on the TV from standby mode either:

• Press the “

” button, P + / P - or a numeric button

on the remote control.

• Press the -P/CH or P/CH+ button on the TV. The TV

will then switch on.

Note: If you switch on your TV via standby button on the

remote control, the programme/source that you were watching

last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

• Press the “ ” button on the remote control or

press the STANDBY switch, so the TV will switch

to standby mode.

• To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode,

standby LED can blink to indicate that features such

as Standby Search, Over Air Download or Timer is

active.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources.

• Press “

” button on your remote control for directly

changing sources.

or

• Select “Source” option from the main menu

by using “

” or “ ” button. Use then “ ” or

“ ” button to highlight an input and press “ ” button

to select.

Note : With the “ ” or “ ” buttons you can set Off or On.

When Off is selected; this source does not appear in the

OSD when you press the

“ ” button of the remote control.

(except for the TV source).

Note : YPbPr mode can be used only when you connect a

device that has a YPbPr output through the PC-VGA input with

YPbPr to PC cable (YPbPr cable is not supplied).

Basic Operations

You can operate your TV using both the

remote control and onset buttons.

Operation with the Buttons of the TV

Main menu OSD cannot be displayed via control

buttons. “+/-” buttons will function as volume up/down

as default. Even if you set other functions for these

buttons, “+/-” buttons will perform as default after a

short while.

Volume Setting

• Press “+/-” buttons to increase or decrease volume,

so a volume level scale (slider) will be displayed

on the screen.

Programme Selection

• Press P/V/AV button once and then use “+/-” buttons

to select the next or previous programme.

AV Mode

• Hold the “P/V/AV ” button, source OSD will be

displayed.Use “+/-” buttons to select the desired

source.

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1001_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 10 05.11.2010 10:26:5505.11.2010 10:26:55

English - 11 -

Operation with the Remote Control

• The remote control of your TV is designed to control

all the functions of the model you selected. The

functions will be described in accordance with the

menu system of your TV.

• Functions of the menu system are described in the

following sections.

Volume Setting

• Press “V+” button to increase the volume. Press “V-”

button to decrease the volume. A volume level scale

(slider) will be displayed on the screen.

Programme Selection (Previous or Next

Programme)

• Press “ P - ” button to select the previous

programme.

• Press “ P + ” button to select the next programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to select

programmes between 0 and 9. The TV will switch

to the selected programme. To select programmes

between 10-500 (for IDTV) or 10-199 (for analogue),

press the numeric buttons consecutively.

• Press directly the programme number to reselect

single digit programmes.

Initial Settings

When the TV is turned on for the ﬁ rst time, the menu

for the language selection appears on the screen. The

message “Welcome please select your language!”

is displayed in all language options sequentially in

the OSD.

By pressing the “

” or “ ” buttons highlight the

language you want to set and press OK button.

Afterwards, “First time installation” OSD will appear

on the screen. By pressing “ ” or “ ” buttons, select

the country you want to set and press OK button (*

for EU countries).

Note: Country selection OSD will not be available for UK.

Press OK button on the remote control to continue

and the following message will be displayed on the

screen:

• To select the “Yes” or “No” option, highlight the item

by using “ ” or “ ” buttons and press the “OK”

button.

The IDTV will automatically tune to the UHF or VHF(*)

(* for EU countries) transmission channels, searching

for digital terrestrial TV broadcasts and displaying

the names of channels found. This process will take

about a few minutes.

After Automatic Search is completed, the following

message asking for analogue channel search appears

on the screen:

To search for analogue channels, select “Yes”. TV

switches to the analogue TV mode. The menu is

displayed to search for analogue channels.

Select your Country, Language and Text language

by using “

” or “ ” and “ ” or “ ” buttons. Press

OK or RED button to continue. To cancel, press the

BLUE button.

For more information on this process, see “Install

Menu” section.

Note : For proper functioning of digital teletext in DTV mode,

you should set country as UK in analogue AUTO PROGRAM

(for UK broadcasts only).

Do not turn off the TV while initializing ﬁ rst time installation.

General Operation

Press the “ ” button on the remote control and

select DTV/USB to switch the TV set to digital

terrestrial television broadcasting.

Information Banner

• Whenever you change channel, using the P- / P+

button or the numeric buttons, the TV displays the

broadcast picture along with an information banner

at the bottom of the screen (available only in DTV

mode). This will remain on the screen for a few

seconds.

• The information banner can also be displayed at

any time while watching TV by pressing the “INFO”

button on the remote control:

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1101_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 11 05.11.2010 10:26:5605.11.2010 10:26:56

English - 12 -

If the selected channel is locked, you must enter the

correct four numeric code to view the channel. “Enter

PIN” will be displayed on the screen in such a case:

Electronic Programme Guide

(EPG)

• Some, but not all, channels send information about

the current and next events. Press GUIDE button to

view the EPG menu. EPG appears on the screen. It

is able to get Information of the channel - programs

weekly by means of 7-DAY-EPG. All programs of

channels are displayed. On the bottom of the screen;

info bar, showing all the available commands, will

be displayed.

RED button (Shrink) : makes the info boxes

smaller.

GREEN button (Expand) : makes the info boxes

larger.

YELLOW button (Prev. Day) : displays the

programmes of previous day.

BLUE button (Next day) : displays the programmes

of the next day.

INFO (Details): displays the programmes in detail.

Numeric buttons (Jump) : go to preferred channel

directly via numeric buttons.

OK : view for current broadcast/reminders for future

programs.

P<P : jumps to the current broadcast.

• Press “0” button on the remote control to view Guide

Search menu. Using this feature, you can search the

programme guide database in accordance with the

genre selected or with name match.

Displaying Subtitles

With digital terrestrial broadcasting (DVB-T), some

programmes are being broadcasted with subtitles.

Press the “M” button to display the main menu, highlight

the Setup and then Language menu using “

” or “ ”

button and press the OK button to display the “Language

settings” menu.

Highlight the “Subtitle” item in “Language settings”

menu and use

” or “ button to set Subtitle to the

desired language.

Note: You can enable subtitles by pressing the GREEN button

of the remote control. Press GREEN button again to disable

subtitle function.

If “Subtitle” is on and a language option is set, pressing

the “ ” button causes the following warning message

display on the screen (** for UK only):

Digital Teletext (** for UK only)

• Press the “ ” button.

• The digital teletext information appears.

• Operate it with the coloured buttons, cursor buttons

and OK button.

The operation method may differ depending on the

contents of the digital teletext.

Follow the instructions displayed on digital teletext

screen.

• When Press “SELECT” button or similar message

appears on the screen, press the OK button.

• When the “ ” button is pressed, the TV returns to

television broadcasting.

• With digital terrestrial broadcasting (DVB-T), in

addition to digital teletext broadcasting together with

the normal broadcasting, there are also channels

with just digital teletext broadcasting.

• The aspect ratio (picture shape) when watching

a channel with just digital teletext broadcasting is

the same as the aspect ratio of the picture viewed

previously.

• When you press the “

” button again, the digital

teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to

the analogue text system. Please do refer to the

“TELETEXT” explanations.

Widescreen

Depending on the type of the broadcast being

transmitted, programmes can be viewed in a number

of formats. Press the “ ” button repeatedly to

change screen format.

When Auto is selected, the format being displayed is

determined by the picture being broadcasted.

PLEASE NOTE : Menu size changes depending on the

chosen image size.

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1201_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 12 05.11.2010 10:26:5605.11.2010 10:26:56

English - 13 -

Notice !

Dolby D audio type is not supported. In this case,

Tv sound will be muted. If the broadcast includes

AC3 stream, the following warning message will be

displayed on the screen:

If there is no audio available, the following warning

message will be displayed on the screen:

IDTV Menu System

Press the “M” button. Main menu will be displayed.

Channel List

Using the “ ” or “ ” button on the remote control, make

sure that the ﬁ rst item, Channel List, is highlighted and

press the “OK” button to display the Channel List or

you can press the OK button during watching DVB-T

broadcasting and get to the Channel List directly.

Navigating the Entire Channel List

Press “ ” or “ ” button for selecting the previous or next

channel. You can press “RED” or “GREEN” button to

move page up or page down.

To watch a speciﬁ c channel, highlight it using “

”

or “

” button and then press “ OK ” button, while the

“Select” item on Channel List menu is highlighted by

using “ ” or “ ” button.

Then the name and number of the selected channel will

be displayed in the top-left and top-right of the channel

display at the top-right of the screen, respectively.

Moving the channels in the channel list

• Press “ ” or “ ” buttons to select the channel that

will be moved.

• Press “ ” or “ ” buttons to select the “ Move ” item on

Channel List menu.

Following OSD will be displayed next to “ OK ” item

to indicate that enter a number by using the numeric

buttons on the remote control and press “ OK ” to

conﬁ rm.

Note: If you enter the same programme number of the channel

that you want to move, “.... channel services will be replaced.

Do you want to continue?” OSD will be displayed. Press OK

to conﬁ rm or select “No” to cancel.

Deleting the Channels in the Channel List

• Press “ ” or “ ” button to select the channel that

will be deleted.

• Press “

” or “ ” button to select the “Delete’’ item

on Channel List menu.

• Press the “ OK ” button to delete the highlighted

channel in the channel list. Then the message below

appears on the screen:

• Press “ ” or “ ” button to highlight the desired

option. If “ OK ” button is pressed while “ Yes ” is

highlighted, the highlighted channel is deleted.

Selecting “ No ” cancels the deletion.

Renaming Channels

To rename a speciﬁ c channel, the channel must

be highlighted by pressing “ ” or “ ” button. Then

highlight the Edit Name item by pressing “ ” or “ ”

button as illustrated below. Press the “OK” button to

activate the rename feature.

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1301_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 13 05.11.2010 10:26:5705.11.2010 10:26:57

English - 14 -

Now pressing “ ” or “ ” button moves to the previous/

next character. Pressing “ ” or “ ” button toggles

the current character, i.e., ‘b’ character becomes ‘a’

by “ ” and ‘c’ by “ ”. Pressing the numeric buttons

‘0...9’ replaces the highlighted character with the

characters printed above the button one by one as

the button is pressed.

Press the “M” button to cancel the editing or OK button

to save the new name.

Adding Locks to Channels

Channel locking provides a password-protected

access to channels selected by parents. In order to

lock a channel you should know the parental lock

password (default value is set to 0000 in the factory

and can only be changed from the Conﬁ guration

menu).

Select the channel to be locked by highlighting it and

select the Lock option by pressing “

” or “ ” button.

When the “OK” button is pressed, a dialog OSD asking

for the password will be displayed.

Enter the password by using the numeric buttons on

the remote control. The lock icon “ ” will now be

displayed next to the selected channel. Repeat the

same operation to cancel the lock.

Setting Favourites

To set a favourite you should highlight the “Favourites”

item at the bottom of the Channel List menu. Then

press “OK” button and Edit Favourite List menu

appears on the screen.

How to Add a Channel to a Favourites List

• By pressing “ ” or “ ” buttons, highlight the channel

that you want to add to the favourite list.

• By pressing “OK” button, the highlighted channel is

added to the Favourite List.

• F icon indicates that a channel is added to Favourite

List.

Removing a Channel from Favourite List

• Highlight the channel that you want to remove from the

favourite list and press OK button to remove.You can

press “OK” button again to re-add a channel.

• To activate Favourites, go to the Conﬁ guration menu

and select Favourite mode. Use “

” / “ ” to set

Favourite mode as on. To cancel Favourites, set

Favourite Mode to Off.

On Screen Help

For all menus, press the “INFO” button to display the

help information about the menu functions.

Programme Guide

This section is same with the instructions given in

the General Operations page. Please see Electronic

Programme Guide (EPG) section in the General

Operations part.

Timers

To display timers window, activate the item from the main

menu. To add a timer, press the YELLOW button on the

remote control. Then “Add Timer” window appears.

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1401_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 14 05.11.2010 10:26:5705.11.2010 10:26:57

English - 15 -

Mode: Selects channel list mode.

Channel : “

” or “ ” keys will navigate the user through

the TV or Radio list.

Date : Starting date is entered via the Left/Right and the

numeric buttons.

Start : Starting time is entered via the Left/Right andcthe

numeric buttons.

End : Ending time is entered via the Left/Right and the

numeric buttons.

Duration: Duration between Start and End time.

Repeat: You can set a timer to be repeated as Once,

Daily or Weekly.

Change/Delete: permits or prohibits any modiﬁ cations

for other users.

You can save the adjustments by pressing the GREEN

key or cancel the process by pressing the RED button.

You can edit the list via GREEN key and delete with

the RED button.

Conditional Access

• Press the “M” button to display the main menu and

use the “ ” or “ ” button to highlight the “Conditional

Access” line and press the “ OK ” button:

Some Digital Terrestrial channels operate on a Pay Per

View basis. These require a subscription and a external

device.

Obtain the Conditional Access Module (CAM) and the

viewing card by subscribing to a pay channel company,

then insert those to the TV using the following procedure.

• Switch off the TV and unplug from the mains.

• The CAM should be correctly inserted, it is impossible

to insert fully if reversed. The CAM or the TV terminal

may be damaged if the CAM is forcefully inserted.

• Connect the TV to the mains supply, switch on and then

wait for few moments until the card is activated.

• Some CAMs may require the following set up. Please

set the CAM by entering the IDTV menu, Conditional

Access then pressing the “OK” button. (CAM set up

menu is not displayed when it is not required.)

• To see the viewing contract information: enter IDTV;

press the “M” button, then highlight Conditional Access

and press the “ OK ” button.

• When no module is inserted, “No Conditional Access

module detected” message appears on the screen.

• Refer to the module instruction manual for details of the

settings.

Note: Insert or remove the CI module only when the TV is in

STANDBY mode or disconnected from the mains.

TV Setup

You can use this item to display the TV functions.

The digital TV Setup menu screen is accessed from

the main menu. Press the “M” button to display the

main menu and use “

” or “ ” button to highlight “TV

Setup”, press the “ OK ” button to display TV Setup

menu screen.

You can ﬁ nd detailed information for all menu items in

“Analogue TV Menu System” section.

Setup

The adjustments in this menu are given as the following:

Conﬁ guration

You can conﬁ gure the settings of your TV. Select

Conﬁ guration from Setup menu and press “ OK ” to

view this menu. Press the “EXIT” button on the remote

control to exit.

Hard of Hearing (* for EU countries

only) (optional)

Use “ ” or “ ” button to select Hard of Hearing and

then press “ ” or “ ” button to set this setting as

On or Off.

If the broadcaster enables any special signal

concerning the audio, you can set this setting as On

to receive such signals.

Favourite Mode

Use this function to enable or disable favourite

mode. Press “ ” / “ ” button to set this function as

on or off.

Channel List

Use “ ” or “ ” buttons to go to Channel List option.

Use “ ” or “ ” buttons to toggle Channel List Mode.

If you select “TV Only”, with the “ ” or “ ” buttons,

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1501_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 15 05.11.2010 10:26:5805.11.2010 10:26:58

English - 16 -

you navigate through only TV channels. If you select

“Radio Only”, with the “ ” or “ ” buttons, you navigate

through only radio channels. If you select “Text Only”,

with the “ ” or “ ” buttons, you navigate through only

text channels.

Scan Encrypted

Scan Encrypted Channel feature will always be ON

after performing ﬁrst time installation. When this

setting is on, search process will locate the encrypted

channels as well. If it is set as OFF manually, encrypted

channels will not be located while in automatic search

or manual search.

Use “

” or “ ” button to select Scan Encrypted and

then press “ ” or “ ” button to set this setting as

On or Off.

Standby Search (optional)

Use “ ” or “ ” button to select Standby Search and

then press “ ” or “ ” button to set this setting as On or

Off. If you change Standby Search to Off, this function

will be unavailable.

To use Standby search please make sure that you

select Standby Search as On.

Receiver Upgrade

Over Air Download (OAD)

This feature helps to keep your TV updated. It works

automatically and searches for new information

when available. Note that this setting is inactive to be

modiﬁ ed

.

. Please ensure that the TV is set to standby

mode. The TV automatically powers up at 3.00 A.M.

each day and searches for any new information which

may be broadcasted and will download this to your

receiver automatically. This operation will normally

take approximately 30 minutes.

Note: Your TV may start in First Time Installation mode after

OAD update.

Parental Control

Use “ ” or “ ” buttons to go to Parental Lock option.

Press OK button to enter the menu. A dialog box

asking for the lock key will be displayed. The key is set

to “0000” initially. Enter PIN. If it is incorrect, “Wrong

Pin” OSD will be displayed. If it is correct, the Parental

Control menu will be displayed:

Maturity Lock (optional) (*)

(*) If you set Country option as UK in the ﬁ rst time

installation, Maturity Lock option will not be visible.

This setting is available only for EU countries.

When set, this option gets the maturity information

from the broadcast and if this maturity level is disabled,

does not show video-audio.

Menu Lock

In menu lock you can set locking for all menus, or the

Installation Menu to restrict access to these menus.

If the menu lock is disabled, there will be free access

to the menu system. Use “ ” or “ ” buttons to go to

Menu Lock option. Use “

” or “ ” buttons to choose

Menu Lock Mode.

DISABLED : All menus are unlocked.

ALL MENUS : All Menus are accessible only with

the correct lock key. So the user cannot add, delete,

rename, channels, cannot set timers.

INSTALLATION MENU : Installation menu is locked.

So the user can’t add channels. Changes will be

updated after exiting ‘Conﬁ guration Menu’.

Set PIN

Use “ ” or “ ” buttons to go to “Set PIN” option.

Press “OK” to display the “Set PIN” window. Use

numeric buttons to enter new pin number you will need

to input your new pin a second time for veriﬁ cation

purposes.The factory default pin number is 0000, if

you change the pin number make sure you write it

down and keep it safe.

Time Settings (Optional)

In the conﬁguration menu, highlight the Time Settings

item by pressing “ ” or “ ” buttons.

Press “OK” and Time Settings sub menu will be

displayed on the screen. Current Time,Time Zone

Setting and Time Zone will be available.

Use “ ” or “ ” buttons to highlight the Time Zone

Setting. Time Zone Setting is set using “ ” or “ ”

buttons. It can be set to AUTO or MANUAL.

When AUTO is selected, Current Time and Time Zone

options will not be available to be set. If MANUAL

option is selected as the Time Zone Setting, Time

Zone can be altered:

• By pressing “

” or “ ” buttons select Time Zone.

Use “ ” or “ ” buttons to change the Time Zone

between GMT-12 or GMT+12. Current Time on the

top of the menu list will then change according to the

selected Time Zone.

Audio Description (Optional)

Audio description refers to an additional narration

track for blind and visually impaired viewers of

visual media, including television and movies. The

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1601_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 16 05.11.2010 10:26:5805.11.2010 10:26:58

English - 17 -

description narrator talks through the presentation,

describing what is happening on the screen during the

natural pauses in the audio (and sometimes during

dialogue, if deemed necessary). You can use this

feature, only if the broadcaster supports that additional

narration track. Use “ ” or “ ” buttons to select an

item. Then use “ ” or “ ” buttons to set.

Audio Description (Optional)

This function enables or disables the audio description

feature by pressing the “ ” or “ ” buttons.

Preferred Language (Optional)

By pressing the “ ” or “ ” buttons the preferred audio

description language is being changed.

This setting can be used, only if it is available.

Relative Volume (Optional)

Using this option, the Audio Description volume level

can be increased or decreased relatively, according

to the general volume.

Language

In this menu the user can adjust the preferred

language. Language is changed by pressing “OK”

button.

Menu : shows the language of the system

Preferred

These settings will be used if available. Otherwise the

current settings will be used.

• Audio : by pressing “ ” or “ ” keys change the

audio language.

• Subtitle : alter the subtitle language with “

” or

“ ” keys. The chosen language will be seen in

subtitles.

Movie Subtitle (optional)

• In order to display subtitles properly, use this setting

to select a movie subtitle language.

• By pressing “

” or “ ” button, select the desired

language option.

• Guide : By pressing “

” or “ ” buttons change the

guide language.

Current

• Audio : if audio language is supported change the

audio language by pressing “ ” or “ ” buttons

• Subtitle : if subtitle is backed up, alter the subtitle

language with “

” or “ ” buttons. The chosen

language will be seen in subtitles.

Note: If the Country option is set to Denmark, Sweden,

Norway or Finland, the Language Settings menu will function

as described below:

Language Settings

In the conﬁ guration menu, highlight the Language

Settings item by pressing “ ” or “ ” buttons. Press

“OK” and Language Settings submenu will be

displayed on the screen:

Use “

” or “ ” buttons to highlight the menu item

that will be adjusted and then press “ ” or “ ” button

to set.

Notes:

• System Language determines the on-screen menu

language.

• Audio Language is used for selecting the soundtrack

of a channels.

• Primary settings are the ﬁrst priority when multiple

choices are available on a broadcast. Secondary

settings are the alternatives when the ﬁrst options

are not available.

Installation

The Installation menu is mainly intended to help you

for creating a Channel Table in the most efﬁ cient way.

Select Installation from the Conﬁ guration menu by

pressing “ ” or “ ” buttons.

This menu includes the following items:

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1701_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 17 05.11.2010 10:26:5905.11.2010 10:26:59

English - 18 -

(*) For Denmark, Sweden, Norway or Finland.

Auto Channel Scan (Retune)

Auto Channel Scan (Retune) is started by pressing

“OK” button while Auto Channel Scan (Retune) item

is highlighted.

The following message appears on the screen:

Highlight Yes or No by using “ ” or “ ” buttons and

press “OK” button to conﬁ rm.

If Yes is selected, automatic search starts.

Selecting No cancels automatic search.

After search is completed for digital channels, a

message asking whether to search for analogue

channels appears on the screen:

Press the “OK” button to search for analogue

channels. The following menu appears on the screen

for analogue channel search:

Select your Country , Language and Text language

by using “

” or “ ” and “ ” or “ ” buttons. Press

“OK” or RED button to continue. To cancel, press

BLUE button. The following menu will be displayed

during the automatic tuning:

After APS is ﬁ nalized, the programme table will appear

on the screen. In the programme table you will see

the programme numbers and names assigned to the

programmes.

Channel Search

In manual channel scan, the number of the multiplex is

entered manually and only that multiplex is searched

for the channels. For each valid channel number, signal

level and signal quality are shown on the screen.

In both manual and auto search any existing channel

in the database is not re-stored to avoid redundant

duplicates of that channel.

Clear Service List (*)

(*) This setting is visible only when the Country option is set

to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “ ” or

“ ” button to select Clear Service List and then press

OK. The following OSD message will be displayed

on the screen:

Highlight NO and press OK to cancel. Select Yes by

pressing “ ” or “ ” button and press OK to delete all

of the channels.

First Time Installation

The user can use this item to load default settings,

which were loaded to the receiver at the factory.

To install factory settings, highlight “First Time

Installation” menu item and press “OK” button, then

you will be asked whether or not to delete the settings.

Selecting “Yes” by pressing “OK” button while “Yes” is

highlighted will delete the existing channel table.

Then you will be asked to conﬁ rm for deleting all

channels and settings:

By selecting Yes and pressing the “OK” button, the

existing channel table will be deleted. After factory

settings are loaded, “First Time Installation” menu

will be displayed.

01_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 1801_MB46_[GB]_1205UK_IDTV_NICKEL15_19843W_10069993_50176012.indd 18 05.11.2010 10:27:0005.11.2010 10:27:00

La page charge ...

Techwood VL19TV1001 Operating Instructions Manual

Techwood VL19TV1001 Operating Instructions Manual

dans d''autres langues

Documents connexes

Autres documents