Pioneer DEH-S1100UB Le manuel du propriétaire

English Français Español

CD RDS RECEIVER

AUTORADIO CD RDS

REPRODUCTOR DE CD CON RECEPTOR RDS

DEH-S1100UB

Operation Manual

Mode d’emploi

Manual de operación

Important (Serial number)

The serial number is located on the bottom of this unit. For your own security and convenience, be sure to

record this number on the enclosed warranty card.

Important (Numéro de série)

Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce

numéro sur la carte de garantie fournie.

Importante (Número de serie)

El número de serie se encuentra en la parte inferior de esta unidad. Por su propia seguridad y comodidad,

asegúrese de anotar este número en la tarjeta de garantía que se adjunta.

- 2 -

English

Getting Started........................................................................................ 3

Radio.......................................................................................................... 7

CD/USB/AUX............................................................................................. 8

Using Pioneer ARC APP ....................................................................... 10

Settings .................................................................................................. 11

FUNCTION settings ............................................................................... 12

AUDIO settings ...................................................................................... 12

SYSTEM settings.................................................................................... 13

ILLUMINATION settings........................................................................ 14

Additional Information ....................................................................... 15

About this manual:

• In the following instructions, a USB memory or USB audio player are referred to as

“USB device”.

Table of Contents

- 3 -- 3 -

English

DEH-S1100UB

Remote Control

Getting Started

Basic operation

Detach button

Display window

M.C. (multi-control) dial

BAND/

USB port

AUX input jack (3.5 mm stereo jack)

(eject)

Disc loading slot

DISP (display)

BASS

SRC (source)/OFF

/

SRC (source)

VOLUME +/–

MUTE

DISP (display)

FUNCTION

AUDIO

- 4 -

English

Frequently used operations

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal,

the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the

source off.

Display indication

Purpose

Operation

Head Unit Remote Control

Turn on the power* Press SRC/OFF to turn on

the power.

Press and hold SRC/OFF to

turn off the power.

Press SRC to turn on the

power.

Press and hold SRC to turn

off the power.

Adjust the volume Turn the M.C. dial. Press VOLUME + or –.

Press MUTE to mute the

unit. Press MUTE again or

press VOLUME + or – to

unmute.

Select a source Press SRC/OFF repeatedly. Press SRC repeatedly.

Change the display

information

Press DISP repeatedly. Press DISP repeatedly.

Return to the previous

display/list

Press BAND/ . Press / to select the

next/previous folder.

Boost the bass level Press BASS.

• You can select the bass

level in [BASS BOOST]

(page 13).

–

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the BASS button is pressed and held.

Appears when the local seek tuning function is set (page 12).

Appears when the sound retriever function is set (page 12).

Appears when random play is set.

Appears when repeat play is set.

- 5 -- 5 -

English

Detach the front panel to prevent theft. Remove any cables and devices attached to the

front panel and turn off the unit before detaching it.

Important

• Avoid subjecting the front panel to excessive shock.

• Keep the front panel out of direct sunlight and high temperatures.

• Always store the detached front panel in a protective case or bag.

Remove the insulation sheet before use.

WARNING

• Do not expose the battery or remote control to excessive heat such as direct sunlight or fire.

CAUTION

• There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the

battery, replace it with the same type.

• Do not handle or store the battery with metallic tools or objects.

Detaching the front panel

Preparing the remote control

Detach Attach

How to replace the battery

Insert the CR2025 (3 V) battery with the plus (+) and

minus (–) poles orientated properly.

- 6 -

English

• If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a

new battery.

• When disposing of used batteries, please comply with governmental regulations or environmental

public institutions’ rules that apply in your country/area.

• “Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”

Important

• Do not store the remote control in high temperatures or direct sunlight.

• Do not let the remote control fall onto the floor, where it may become jammed under the brake or

accelerator pedal.

When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the

display.

1 Press the M.C. dial.

The setup menu disappears after 30 seconds of no operation. If you prefer not to set

at this time, turn the M.C. dial to select [NO], then press to confirm.

2 Turn the M.C. dial to adjust the hour, then press to confirm.

The indicator moves to the minute setting automatically.

3 Turn the M.C. dial to adjust the minute, then press to confirm.

[QUIT] appears.

4 Turn the M.C. dial to select [YES], then press to confirm.

NOTES

• You can cancel the menu setting by pressing SRC/OFF.

• This setting can be made at any time. See page 13 for more details.

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

4 Turn the M.C. dial to select [YES], then press to confirm.

1 Press and hold SRC/OFF until the unit turns off.

Setting the clock (CLOCK SET)

Canceling the demonstration display (DEMO OFF)

INITIAL settings

- 7 -- 7 -

English

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

4 Turn the M.C. dial to select an option, then press to confirm.

The tuner frequencies on this unit are allocated for use in North America. Use in other

areas may result in poor reception.

1 Press SRC/OFF to select [RADIO].

2 Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM].

3 Press a number button (1/ to 6/).

Menu Item Description

SP-P/O MODE Select when there is a full-range speaker connected to the rear

speaker output leads and there is a subwoofer connected to the

RCA output.

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to

the rear speaker output leads and there is a subwoofer

connected to the RCA output.

[REAR/REAR] Select when there are full-range speakers connected to the rear

speaker output leads and RCA output. If there is a full-range

speaker connected to the rear speaker output leads, and the

RCA output is not used, you may select either [REAR/SUB.W] or

[REAR/REAR].

S/W UPDATE Select to confirm the latest system information on the unit.

[SYSTEM INFO]

[SYSTEM UPDATE] Select to update the unit to the latest software and initialize the

unit settings. For details on the latest software and updating,

visit our website.

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

restarted automatically.

(Some of the settings may be retained even after resetting the

unit.)

[YES], [NO]

Radio

Receiving preset stations

- 8 -

English

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the

FUNCTION settings (page 12).

The six strongest stations are stored on the number buttons (1/ to 6/).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1

After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops

when the unit receives a station. To cancel seek tuning, press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 12).

To store stations manually

1

While receiving the station you want to store, press and hold one of the number

buttons (1/ to 6/ ) until it stops flashing.

Disconnect headphones from the device before connecting it to the unit.

CD

1

Insert a disc into the disc loading slot with the label side up.

To eject a disc, stop playback first then press .

USB devices (including Android™)

1

Open the USB port cover.

Best stations memory (BSM)

CD/USB/AUX

Playing back

- 9 -- 9 -

English

2 Plug in the USB device using an appropriate cable.

NOTE

To automatically switch to [USB] source when a USB device is connected to the unit, set [USB AUTO] to

[ON] in the SYSTEM settings (page 14).

CAUTION

Use a USB cable (sold separately) to connect the USB device as any device connected directly to the

unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 10.

MTP connection

A device installed with Android OS 4.0 or most of later versions can be connected to the unit via MTP,

using the cable supplied with the device. However, depending on the connected device, OS version or

the numbers of the files in the device, audio files/songs may not be able to be played back via MTP.

Note that MTP connection is not compatible with WAV and FLAC file formats.

NOTE

If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the SYSTEM settings

(page 14).

AUX

1

Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 14).

You can make various adjustments in the FUNCTION settings (page 12).

Note that the following operations do not work for an AUX device. To operate an AUX

device, use the device itself.

Operations

Purpose Operation

Select a folder*1 Press 1/ or 2/.

Select a track/song Press or .

Fast forward or reverse*2 Press and hold or .

- 10 -

English

*1 Compressed audio files only

*2 When you use the fast forward or reverse function while playing a VBR file, the playback time may

be not correct.

You can operate the unit from Pioneer ARC APP installed on an Android device. In some

cases, you can control aspects of the application, such as source selection, pause, etc., by

using the unit.

For details on what operations are available on the application, see the application’s help

section.

WARNING

Do not attempt to operate the application while driving. Make sure to pull off the road and park your

vehicle in a safe location before attempting to use the controls on the application.

For Android device users

This function is compatible with devices that have Android OS 4.1 or later installed and

also support AOA (Android Open Accessory) 2.0.

Search for a file from a list 1 Press and hold BASS to display the list.

2 Turn the M.C. dial to select the desired

file (folder) name or category, then press

to confirm.

3 Turn the M.C. dial to select the desired

file, then press to confirm.

Playback starts.

View a list of the files in the selected folder/

category*1

Press the M.C. dial when a folder/category

is selected.

Play a song in the selected folder/

category*1

Press and hold the M.C. dial when a folder/

category is selected.

Repeat play Press 6/.

Random play Press 5/.

Pause/resume playback Press 4/PAUSE.

Return to root folder (CD/USB only)*1 Press and hold 1/.

Switch between compressed audio and CD-

DA (CD only)

Press BAND/.

Change drives in USB device

(Devices that support the USB mass storage

device class protocol only)

Press BAND/.

Using Pioneer ARC APP

Purpose Operation

- 11 -- 11 -

English

You can download Pioneer ARC APP on Google Play™.

NOTE

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own

software design, regardless of the OS version.

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.

4 Turn the M.C. dial to select [APP CONTROL], then press to confirm.

5 Turn the M.C. dial to select [P.APP AUTO ON], then press to confirm.

6 Turn the M.C. dial to select [ON], then press to confirm.

7 Connect this unit with the Android device via USB.

Pioneer ARC APP on the device starts automatically.

NOTE

If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you

to install the application will appear on your Android device. Select [OFF] in [P.APP AUTO ON] to

clear the message (page 14).

1 Press SRC/OFF to select [ANDROID].

Basic operations

You can adjust various settings in the main menu.

Making a connection with Pioneer ARC APP

Listening to music on Android

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press 4/PAUSE.

Settings

- 12 -

English

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select one of the categories below, then press to confirm.

• FUNCTION settings (page 12)

• AUDIO settings (page 12)

• SYSTEM settings (page 13)

• ILLUMINATION settings (page 14)

3 Turn the M.C. dial to select the options, then press to confirm.

The menu items vary according to the source.

FUNCTION settings

Menu Item Description

BSM

Store the six strongest stations on the number

buttons (1/ to 6/ ) automatically.

LOCAL

FM: [OFF], [LV1], [LV2], [LV3], [LV4]

AM: [OFF], [LV1], [LV2]

Restrict the tuning station according to the

signal strength.

SEEK

[MAN], [PCH] Assign or buttons to seek the stations

one by one (manual tuning) or select a station

from the preset channels.

S.RTRV

[1] (effective for low compression

rates),

[2] (effective for high

compression rates),

[OFF]

Enhance compressed audio and restore rich

sound.

Not available when:

• CD-DA/CD-TEXT is played back.

• The FLAC file is played back.

AUDIO settings

Menu Item Description

FADER*1

Adjust the front and rear speaker balance.

BALANCE

Adjust the left and right speaker balance.

USB

- 13 -- 13 -

English

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 7).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 7).

*3 Not available when [OFF] is selected in [SUB.W].

You can also access to these menus when the unit is turned off.

EQ SETTING

[SUPER BASS], [POWERFUL],

[DYNAMIC], [NATURAL], [VOCAL],

[VIVID], [CUSTOM1], [CUSTOM2],

[FLAT]

Select an equalizer band and

level for further customizing.

Equalizer band: [80HZ], [250HZ],

[800HZ], [2.5KHZ], [8KHZ]

Equalizer level: [+6] to [–6]

Select or customize the equalizer curve.

[CUSTOM1] can be set separately for each source.

However, each of the below combinations are set

to the same setting automatically.

[CUSTOM2] is a shared setting used for all

sources.

You can also switch the equalizer by pressing

repeatedly.

LOUDNESS

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

SUB.W*2

[NOR], [REV], [OFF] Select the subwoofer phase.

SUB.W CTRL*2*3

Cut-off frequency: [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Output level: [–24] to [+6]

Slope level: [–12], [–24]

Only frequencies lower than those in the

selected range are output from the subwoofer.

BASS BOOST

[0] to [+6] Select the bass boost level.

HPF SETTING

Cut-off frequency: [OFF], [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Slope level: [–12], [–24]

Only frequencies higher than the high-pass filter

(HPF) cutoff are output from the speakers.

SLA

[+4] to [–4] Adjust the volume level for each source except

FM.

SYSTEM settings

Menu Item Description

- 14 -

English

Menu Item Description

CLOCK SET

Set the clock (page 6).

12H/24H

[12H], [24H] Select the time notation.

SCROLL SET

[ONCE], [LOOP], [OFF] Select the way to scroll the text in the display

window.

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

connected to the unit.

ANDROID WIRED

[MEMORY], [APP CONTROL] Select the appropriate connection method for an

Android device.

P. AP P AU TO O N

[ON], [OFF]

Select [ON] to automatically launch Pioneer ARC

APP when an Android device is connected to the

unit via AOA. (Not available when [MEMORY] is

selected in [ANDROID WIRED].)

USB AUTO

[ON], [OFF] Select [ON] to automatically switch to [USB]

source when a USB device is connected to the

unit.

Select [OFF] when a USB device is being

connected to the unit just for charging.

ILLUMINATION settings

Menu Item Description

DIM SETTING

[SYNC CLOCK], [MANUAL] Select the way to change the display brightness.

BRIGHTNESS

[1] to [10] Change the display brightness.

The available setting ranges differ depending on

[DIM SETTING].

- 15 -

English

The display automatically returns to the

normal display.

→ No operations have been made for

about 30 seconds.

–Perform an operation.

The repeat play range changes

unexpectedly.

→ Depending on the repeat play range,

the selected range may change when

another folder or track is being selected

or during fast forwarding/reversing.

–Select the repeat play range again.

A subfolder is not played back.

→ Subfolders cannot be played when

[FLD] (folder repeat) is selected.

–Select another repeat play range.

The sound is intermittent.

→ You are using a device, such as a cellular

phone, that may cause audible

interference.

–Move electrical devices that may be

causing the interference away from

the unit.

Common

AMP ERROR

→ This unit fails to operate or the speaker

connection is incorrect.

→ The protective circuit is activated.

–Check the speaker connection.

–Turn the ignition switch OFF and back

to ON again. If the message remains,

contact your dealer or an authorized

Pioneer Service Station for assistance.

NO XXXX (NO TITLE, for example)

→ There is no embedded text information.

– Switch the display or play another

track/file.

CD player

ERROR-07, 11, 12, 17, 30

→ The disc is dirty.

–Clean the disc.

→ The disc is scratched.

–Replace the disc.

ERROR-07, 10, 11, 12, 15, 17, 30, A0

→ There is an electrical or mechanical

error.

–Turn the ignition switch OFF and back

to ON, or switch to a different source,

then back to the CD player.

ERROR-15

→ The inserted disc is blank.

–Replace the disc.

ERROR-23

→ Unsupported CD format.

–Replace the disc.

FORMAT READ

→ Sometimes there is a delay between the

start of playback and when you start to

hear any sound.

–Wait until the message disappears and

you hear sound.

NO AUDIO

→ The inserted disc does not contain any

playable files.

–Replace the disc.

SKIPPED

→ The inserted disc contains DRM

protected files.

–The protected files are skipped.

Additional Information

Troubleshooting

Error messages

- 16 -

English

PROTECT

→ All the files on the inserted disc are

embedded with DRM.

–Replace the disc.

USB device

FORMAT READ

→ Sometimes there is a delay between the

start of playback and when you start to

hear any sound.

–Wait until the message disappears and

you hear sound.

NO AUDIO

→ There are no songs.

–Transfer the audio files to the USB

device and connect.

→ The connected USB device has security

enabled.

–Follow the USB device instructions to

disable the security.

SKIPPED

→ The connected USB device contains

DRM protected files.

–The protected files are skipped.

PROTECT

→ All the files on the connected USB

device are embedded with DRM.

–Replace the USB device.

N/A USB

→ The connected USB device is not

supported by this unit.

–Disconnect your device and replace it

with a compatible USB device.

HUB ERROR

→ The USB device connected via a USB

hub is not supported by this unit.

– Connect the USB device directly to this

unit using a USB cable.

CHECK USB

→ The USB connector or USB cable has

short-circuited.

–Check that the USB connector or USB

cable is not caught in something or

damaged.

→ The connected USB device consumes

more than maximum allowable current.

–Disconnect the USB device and do not

use it. Turn the ignition switch OFF

and back to ACC or ON. Connect only

compliant USB devices.

ERROR-19

→ Communication failed.

–Perform one of the following

operations, then return to the USB

source.

• Disconnect the USB device.

• Change to a different source.

ERROR-23

→ USB device was not formatted properly.

–Format the USB device with FAT12,

FAT16 or FAT32.

Discs and player

• Use only discs that feature either of the

following two logos.

• Use 12-cm discs.

• Use only conventional, fully circular discs.

• The following types of discs cannot be

used with this unit:

–DualDiscs

– 8-cm discs: Attempts to use such discs

with an adaptor may cause the unit to

malfunction.

– Oddly shaped discs

–Discs other than CDs

– Damaged discs, including discs that are

cracked, chipped or warped

Handling guidelines

- 17 -

English

– CD-R/RW discs that have not been

finalized

• Do not write on or apply chemicals to the

surface of the discs.

• To clean a CD, wipe the disc with a soft

cloth outward from the center.

• Condensation may temporarily impair

the player’s performance. Let it rest for

about one hour to adjust to a warmer

temperature. Also, wipe any damp discs

off with a soft cloth.

• When using discs that can be printed on

label surfaces, check the instructions and

the warnings of the discs. Depending on

the discs, inserting and ejecting may not

be possible. Using such discs may result

in damage to this equipment.

• Do not attach commercially available

labels or other materials to the discs.

– The discs may warp making the disc

unplayable.

– The labels may come off during

playback and prevent ejection of the

discs, which may result in damage to

the equipment.

USB storage device

• Connections via USB hubs are not

supported.

• Firmly secure the USB storage device

before driving. Do not let the USB storage

device fall onto the floor, where it may

become jammed under the brake or

accelerator pedal.

• Depending on the USB storage device,

the following problems may occur.

–Operations may vary.

–The storage device may not be

recognized.

– Files may not be played back properly.

– The device may cause audible

interference when you are listening to

the radio.

• Only the first 32 characters can be

displayed as a file name (including the file

extension) or a folder name.

• The unit may not work properly

depending on the application used to

encode WMA files.

• There may be a slight delay at the start of

the playback of audio files embedded

with image data, or audio files stored on a

USB device with numerous folder

hierarchies.

CAUTION

• Pioneer cannot guarantee compatibility

with all USB mass storage devices, and

assumes no responsibility for any loss of

data on media players, smartphones, or

other devices while using this product.

• Do not leave discs or a USB storage

device in any place that is subject to high

temperatures.

WMA files

MP3 files

Compressed audio

compatibility

File extension .wma

Bit rate 48 kbps to 320 kbps

(CBR), 48 kbps to 384

kbps (VBR)

Sampling frequency 32 kHz, 44.1 kHz, 48

kHz

Windows Media™

Audio Professional,

Lossless, Voice/DRM

Stream/Stream with

video

Not compatible

File extension .mp3

Bit rate 8 kbps to 320 kbps

(CBR), VBR

- 18 -

English

WAV files

• WAV file formats cannot be connected via

MTP.

FLAC files

• FLAC file formats cannot be connected

via MTP.

• FLAC files may not be playable,

depending on the encoder.

Disc

• Regardless of the length of the blank

section between the songs from the

original recording, compressed audio

discs play with a short pause between

songs.

USB device

• There may be a slight delay when starting

playback of audio files on a USB storage

device with numerous folder hierarchies.

The user cannot assign folder numbers and

specify playback sequences with this unit.

Sequence of audio file depends on the

connected device.

Note that the hidden files in a USB device

cannot be played back.

Sampling frequency 8 kHz to 48 kHz (32

kHz, 44.1 kHz, 48 kHz

for emphasis)

Compatible ID3 tag

version

1.0, 1.1, 2.2, 2.3, 2.4

(ID3 tag Version 2.x is

given priority over

Version 1.x.)

M3u playlist Not compatible

MP3i (MP3

interactive), mp3 PRO

Not compatible

File extension .wav

Quantization bits 8 and 16 (LPCM), 4

(MSADPCM)

Sampling frequency 16 kHz to 48 kHz

(LPCM), 22.05 kHz and

44.1 kHz (MS ADPCM)

File extension .flac

Sampling frequency 8/11.025/12/16/22.05/

24/32/44.1/48 kHz

Quantization bit rate 16 bit

Channel mode 1/2 ch

Playable folder

hierarchy

Up to eight tiers (A

practical hierarchy is

less than two tiers.)

Playable folders Up to 99

Playable files Up to 999

File system ISO 9660 Level 1 and

2, Romeo, Joliet

Multi-session

playback

Compatible

Packet write data

transfer

Not compatible

Playable folder

hierarchy

Up to eight tiers (A

practical hierarchy is

less than two tiers.)

Playable folders Up to 500

Playable files Up to 15 000

Playback of copyright-

protected files

Not compatible

Partitioned USB

device

Only the first partition

can be played.

Sequence of audio files

- 19 -

English

Example of a hierarchy

WMA

Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States and/or

other countries.

This product includes technology owned

by Microsoft Corporation and cannot be

used or distributed without a license from

Microsoft Licensing, Inc.

FLAC

Foundation

Redistribution and use in source and

binary forms, with or without modification,

are permitted provided that the following

conditions are met:

–Redistributions of source code must

retain the above copyright notice, this list

of conditions and the following

disclaimer.

–Redistributions in binary form must

reproduce the above copyright notice,

this list of conditions and the following

disclaimer in the documentation and/or

other materials provided with the

distribution.

–Neither the name of the Xiph.org

Foundation nor the names of its

contributors may be used to endorse or

promote products derived from this

software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE

COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS” AND ANY EXPRESS

OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE

FOUNDATION OR CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Google™, Google Play, Android

Google, Google Play and Android are

trademarks of Google LLC.

General

Power source: 14.4 V DC (10.8 V to 15.1 V

allowable)

Grounding system: Negative type

Maximum current consumption: 10.0 A

Dimensions (W × H × D):

DIN

Chassis: 178 mm × 50 mm × 165 mm

(7 in. × 2 in. × 6-1/2 in.)

Nose: 188 mm × 58 mm × 17 mm (7-

3/8 in. × 2-1/4 in. × 5/8 in.)

Copyright and trademark

Folder

Compressed

audio file

to : Playback sequence

01 to 05: Folder number

Specifications

- 20 -

English

D

Chassis: 178 mm × 50 mm × 165 mm

(7 in. × 2 in. × 6-1/2 in.)

Nose: 170 mm × 46 mm × 17 mm (6-

3/4 in. × 1-3/4 in. × 5/8 in.)

Weight: 1 kg (2.2 lbs)

Audio

Maximum power output:

• 50 W × 4 ch/4 Ω (for no subwoofer)

• 50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω

(for subwoofer)

Continuous power output:

22 W × 4 (50 Hz to 15 000 Hz, 5 %

THD, 4 Ω load, both channels driven)

Load impedance: 4 Ω (4 Ω to 8 Ω allowable)

Preout maximum output level: 2.0 V

Loudness contour: +10 dB (100 Hz), +6.5

dB (10 kHz) (volume: –30 dB)

Equalizer (5-Band Graphic Equalizer):

Frequency: 80 Hz/250 Hz/800 Hz/2.5

kHz/8 kHz

Equalization range: ±12 dB (2 dB step)

Subwoofer (mono):

Frequency: 50 Hz/63 Hz/80 Hz/100

Hz/125 Hz/160 Hz/200 Hz

Slope: –12 dB/oct, –24 dB/oct

Gain: +6 dB to –24 dB

Phase: Normal/Reverse

CD player

System: Compact disc audio system

Usable discs: Compact disc

Signal-to-noise ratio: 94 dB (1 kHz) (IHF-A

network)

Number of channels: 2 (stereo)

MP3 decoding format: MPEG-1 & 2 Audio

Layer 3

WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2

(2 ch audio)

WAV signal format: Linear PCM & MS

ADPCM (Non-compressed)

USB

USB standard specification: USB 2.0 full

speed

Maximum current supply: 1.5 A

USB Protocol:

MSC (Mass Storage Class)

MTP (Media Transfer Protocol)

AOA (Android Open Accessory) 2.0

File system: FAT12, FAT16, FAT32

MP3 decoding format: MPEG-1 & 2 Audio

Layer 3

WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2

(2 ch audio)

FLAC decoding format: v1.3.0 (Free

Lossless Audio Codec)

WAV signal format: Linear PCM & MS

ADPCM (Non-compressed)

FM tuner

Frequency range: 87.9 MHz to 107.9 MHz

Usable sensitivity: 11 dBf (1.0 μV/75 Ω,

mono, S/N: 30 dB)

Signal-to-noise ratio: 72 dB (IHF-A network)

AM tuner

Frequency range: 530 kHz to 1 710 kHz

Usable sensitivity: 25 μV (S/N: 20 dB)

Signal-to-noise ratio: 62 dB (IHF-A network)

CEA2006 Specifications

Power output: 14 W RMS × 4 Channels (4 Ω

and 1 % THD+N)

S/N ratio: 91 dBA (reference: 1 W into 4 Ω)

NOTE

Specifications and the design are subject

to modifications without notice.

<

=

La page charge ...

Pioneer DEH-S1100UB Le manuel du propriétaire

Pioneer DEH-S1100UB Le manuel du propriétaire

dans d''autres langues

Documents connexes