Extron XTP R HD 4K Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

User Guide
XTP T HD 4K
XTP R HD 4K
XTP Extenders
XTP 4K Transmitter and XTP 4K Receiver
68-2716-01 Rev. D
01 19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, ,when used on the product, is
intended to alert the user of the presence of uninsulated dangerous
voltage within the product’s enclosure that may present a risk of electric
shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und
die einen elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di importanti istruzioni di funzionamento
e manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 简体中文
警告 产品上的这个标志意在警用户该产品机壳内有暴露的危险 电压,
险。
注意 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修说明
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容,敬请访问 Extron 网站 , www.extron.com,参见
Extron 安全规范指南,产品编号 68-290-01
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
安全記事 • 繁體中文
警告: 若產品上使用此符是為了提醒使用者產品機殼內存
可能會導致觸電之風險的未絕緣危險電壓
注意 品上使用此符號,是為提醒使用設備隨附用戶手冊中
重要的操作和維維修
有關安全性指導方針法規遵EMI/EMF 相容存取範圍和相主題的詳細資
訊,請瀏覽 Extron 網站:www.extron.com然後《Extron 安全性與法規
守手冊準則編號 68-290-01
安全上の注意 日本語
警告: この 製品上に表示されている場合は、筐体内に絶縁され
いない高電圧が流れ、感電の危険があるこていま
意:この が製品上に表されている場合はの取明書
されている重作と保()の示についてユーザーの
を喚起するものです
安全上の注意、法規厳守、EMI/EMF適合性、その他の関連項
スト イト www.extron.com よ り Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ださい。
Copyright
© 2017-2019 Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (
®
), registered service marks (
SM
), and trademarks (
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free,
Global Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt,
MediaLink, MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,
StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP,
XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
)
AAP, AFL (Accu-RATEFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS(ClassD Ripple
Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), Room Agent,
Scope-Trigger, ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K ,
WebShare, XTRA, and ZipCaddy
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION: The Twisted Pair Extension technology works with unshielded twisted
pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are required.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory
Compliance Guide” on the Extron website.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
ATTENTION:
Risk of property damage.
Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses used in this
guide, the character “0” is used for the number zero and “O” is the capital letter
“o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
xiiiXTP T HD 4K Transmitter and XTP R HD 4K Receiver • Contents
Contents
Introduction............................................................ 1
Guide Overview .................................................. 1
Product Descriptions .......................................... 1
System Compatibility ...................................... 2
Control Methods ............................................. 2
Features ............................................................. 2
XTP Interconnection Features ......................... 2
Video Features ................................................ 3
Audio Features ............................................... 3
Control Features ............................................. 3
General Features ............................................ 4
Installation .............................................................. 5
Rear Panel Connectors ....................................... 5
Transmitter Rear Panel Connectors ................. 5
Receiver Rear Panel Connectors .................... 7
Connection Details ............................................. 9
HDMI Connection ........................................... 9
Twisted Pair Cable Termination and
Recommendations for XTP
Communication ........................................... 10
Twisted Pair Cable Termination for
Pass-Through Ethernet Communication ...... 11
RS-232 and IR Over XTP Communication .... 12
Power Connection ........................................ 13
Operation .............................................................. 16
Transmitter Front Panel Features ...................... 16
Receiver Front Panel Features .......................... 17
HDMI Audio Switch .......................................... 17
EDID ................................................................. 17
Audio Output Overview ..................................... 18
Reset Modes .................................................... 19
SIS Configuration and Control ........................ 20
Host Device Connection ................................... 20
SIS Overview .................................................... 20
Host and Device Communication .................. 20
Error Responses ........................................... 20
Command and Response Table Overview..... 21
Symbol Definitions ........................................ 21
Command and Response Tables for the
Transmitter SIS Commands ............................. 22
Audio Configuration Commands ................... 22
Advanced Configuration Commands ............ 23
Device Commands ....................................... 24
Command and Response Tables for the
Receiver SIS Commands ................................. 25
Audio Configuration Commands ................... 25
Advanced Configuration Commands ............ 26
Device Commands ....................................... 26
Configuration Software ..................................... 27
Software Installation.......................................... 27
Software Download Center Page .................. 27
Software Product Page ................................. 28
Software Connection ........................................ 29
Software Operation........................................... 30
Menu Bar ..................................................... 30
Transmitter Configuration .............................. 33
Receiver Configuration .................................. 37
Reference Information ...................................... 39
Mounting .......................................................... 39
Tabletops ...................................................... 39
Furniture ....................................................... 39
Racks ........................................................... 39
Firmware Download .......................................... 40
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Contents xiv
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Introduction 1
Introduction
This section contains general information about this guide and the Extron XTP T HD 4K
transmitter and XTP R HD 4K receiver. Topics in this section include the following:
Guide Overview
Product Descriptions
Features
Guide Overview
This guide contains installation, operation, control, and reference information for the
XTP T HD 4K transmitter and the XTP R HD 4K receiver primarily in point-to-point
applications.
NOTE: See an XTP matrix switcher user guide at www.extron.com for matrix
applications.
In this guide, the terms “transmitter” and “XTP T HD 4K” refer to the XTP T HD 4K
transmitter. The terms “receiver” and “XTP R HD 4K” refer to the XTP R HD 4K receiver.
Product Descriptions
The XTP T HD 4K and XTP R HD 4K enable extension of video, audio, bidirectional control,
and Ethernet signals over a single shielded twisted pair cable. They are compliant with
HDCP 2.2 standards and support video signal resolutions up to 4K. They work with Extron
XTP devices in matrix or point-to-point applications for signal distribution and long-distance
transmission between XTP devices.
Either device can be powered locally or remotely through an Extron Power Injector or XTP
matrix switcher (see Power Connection on page 13).
The following diagram shows the XTP T HD 4K and XTP R HD 4K in an XTP point-to-point
application.
POWER
12V
HDMI
0.7A MAX
Rx GTx
RS-232 IR
RxTx
+
+
LR
LOOP THRU
RESET
AUDIO
OFF
ON
AUDIO
XTP T HD 4K
LAN
SIG LINK
XTP OUT
INPUTS
OVER XTP
PC
Ext
ron
XT
P T HD 4K
XT
P Transmitter
HDMI
HDMI
POWER
12V
0.7A MAX
Rx GTx
RS-232 IR
XTP R HD 4K
RL
RxTx
-+
-+-+
1
2
AUDIO
ON
AUDIO
RESET
LAN
OVER XTP
OUTPUTS
RELAYS
SIG LINK
XTP IN
HDMI
OFF
S/PDIF
MODEL 80
FLAT PANEL
Extron
XTP R HD 4K
XTP Receiver
4K Display
HDMI
Shielded
Twisted Pair Cable
up to 330' (100 m)
Figure 1. Typical Point-to-Point Application
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Introduction 2
System Compatibility
The XTP T HD 4K and XTP R HD 4K are compatible with XTP systems, but the maximum
video resolution may be limited with different twisted pair models. See the table below for
maximum video resolutions and refresh rates for various inputs and outputs.
Maximum Resolution and Refresh Rates for XTP Systems
Output
Non-4K 4K Fiber 4K Twisted
Pair
4K PLUS
Input
Analog 1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
Non-4K Digital 2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
4K Fiber 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 24 Hz
4096x2160
@ 24 Hz
4K Twisted Pair 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 30 Hz
4K PLUS 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 60 Hz
Control Methods
To directly control either device, use one of the following methods:
Simple Instruction Set (SIS) commands (see SIS Configuration and Control on
page 20)
XTP System Configuration Software (see Configuration Software on page 27)
Certain features can also be controlled through an XTP matrix switcher (see the XTP matrix
switcher user guide at www.extron.com).
NOTE: If the XTP T HD 4K or XTP R HD 4K is connected to an XTP matrix switcher,
configure it through the XTP matrix switcher (see the XTP matrix switcher user guide
for SIS commands or the XTP System Configuration Help File for software details).
Features
The following features apply to the XTP transmitter and receiver unless stated otherwise.
XTP Interconnection Features
Reliable cable infrastructure — Transmits or receives video, audio, bidirectional
RS-232 and IR, and Ethernet over a shielded twisted pair cable to provide high reliability
and maximum performance on an economical and easily installed cable infrastructure.
Shielded twisted pair cable compatibility — Supports a maximum transmission
distance of 330 feet (100 meters) for all compatible resolutions when used with shielded
twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of
24 AWG or better is recommended for optimal performance.
Bidirectional RS-232 and IR insertion for AV device control — Inserts bidirectional
RS-232 control and IR signals into the XTP output, allowing a remote device to be
controlled without the need for additional cabling.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Introduction 3
Ethernet extension — Reduces the amount of independent network drops required
within a system with centralized 10/100Base-T Ethernet communication via an Ethernet
pass-through port.
Remote power capability — Allows for simplified integration of XTP twisted pair
transmitters and receivers. They can be powered by an XTP matrix switcher or another
XTP endpoint with an Extron power injector.
RJ-45 signal and link status LED indicators for XTP ports — Provide a means
for validating signal flow and operation from transmitter to receiver, allowing quick
identification of connectivity issues.
Video Features
Computer and video resolutions up to 4K — Supports digital signal extension,
maintaining superior image quality at the highest resolutions.
HDMI support — Includes data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D,
and HD lossless audio formats.
HDCP compliance — Ensures display of content-protected media and interoperability
with other HDCP-compliant devices.
HDMI loop-through with selectable audio control (transmitter only) — Features
an active HDMI output with support for embedded audio for connection to a local
monitor.
HDMI to DVI interface format correction (receiver only) — Automatically reformats
HDMI source signals for output to a connected DVI display.
Audio Features
Multiple embedded audio formats — Provides reliable operation with a broad range
of multi-channel audio signals from HDMI sources.
Selectable analog stereo audio input embedding (transmitter only) — Supports
balanced and unbalanced audio for extended transmission. This feature enables direct
connection of separate stereo audio signals from a laptop, Blu-ray Disc™ player, or
other device.
Adjustable audio input gain and attenuation (transmitter only) — Eliminates
noticeable volume differences when switching between sources.
HDMI audio de-embedding with analog stereo and digital S/PDIF audio outputs
(receiver only) — Provides digital HDMI audio as a balanced or unbalanced analog
stereo signal on captive screw connectors.
Audio output volume adjustment and muting capabilities (receiver only)
Selectable HDMI audio pass-through (receiver only) — Enables or disables audio
signal pass-through on the HDMI output from a rear panel toggle switch.
Control Features
Front panel USB configuration port
Extron XTP System Configuration Software compatibility — Allows for easy setup
and commissioning.
Two relays for controlling room functions (receiver only) — Enables control of
lighting, screen settings, and other device functions.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Introduction 4
General Features
XTP compatibility — Provides a flexible signal switching and distribution solution that
is completely integrated, ensuring reliable routing of multiple digital and analog formats.
EDID Minder — Automatically manages EDID communication between connected
devices. It ensures that all sources power up properly and reliably outputs content for
display.
Key Minder — Authenticates and maintains continuous HDCP encryption between
input and output devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single source signal to one
or more displays.
HDCP Visual Confirmation — Provides a green signal when encrypted content is
sent to a non-compliant display, providing immediate visual confirmation that protected
content cannot be viewed on the display.
Internal color bars test pattern (transmitter only) — Helps with setup and
calibration.
User-selectable HDCP authorization (transmitter only) — Allows individual inputs
to appear HDCP compliant or non-HDCP compliant to the connected source, which is
beneficial if the source automatically encrypts all content when connected to an
HDCP-compliant device. Protected material is not passed in non-HDCP mode.
LED indicators — Provide visual indication for real-time feedback and monitoring of
key performance parameters.
Transmitter — Provides visual indication of signal presence, HDCP, selected audio
input format, audio signal clipping, and power.
Receiver — Provides visual indication of signal presence, HDCP, received audio
input type, and power.
LockIt HDMI cable lacing brackets — Secure HDMI cables to the HDMI connectors.
1" (2.5 cm) high, half rack width metal enclosure — Allows for discreet placement
and concealment.
Highly reliable, energy-efficient external universal power supply included
Provides worldwide power compatibility, with high demonstrated reliability and low
power consumption for reduced operating costs.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation 5
Installation
This section contains the installation procedures and details for the XTP T HD 4K and
XTP R HD 4K. Topics in this section include the following:
Rear Panel Connectors
Connection Details
Rear Panel Connectors
Transmitter Rear Panel Connectors
POWER
12V
HDMI
0.7A MAX
Rx GTx
RS-232 IR
RxTx
+
+
LR
LOOP THRU
RESET
AUDIO
OFF
ON
AUDIO
XTP T HD 4K
LAN
SIG LINK
XTP OUT
INPUTS
OVER XTP
ABCD EFG
A
HDMI input connector (see below)
B
HDMI loop-through connector and
HDMI audio switch (see below)
C
Analog audio input connector
(see the next page)
D
RS-232 and IR Over XTP connector
(see the next page)
E
XTP output connector (see the next page)
F
LAN connector (see the next page)
G
Power connector and LED (see page 7)
Figure 2. XTP T HD 4K Rear Panel Connectors
Transmitter input connections
NOTES:
The maximum length for HDMI cables is 15 feet (4.6 meters).
Use Extron LockIt Cable Lacing Brackets to secure HDMI connectors to the device
(see HDMI Connection on page 9).
A
HDMI input connector — Connect a digital video source device to the HDMI
input connector. It accepts HDMI, DVI (with an appropriate adapter), or dual mode
DisplayPort video sources.
B
HDMI loop-through connector and HDMI audio switch — Connect a digital video
display to the HDMI loop-through connector for a local display of the HDMI input. To
mute or unmute the embedded audio, hold the HDMI audio switch up or down (see
HDMI Audio Switch on page 17). A display that is not HDCP-compliant displays a
green screen when HDCP-encrypted content is sent to it.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation 6
C
Analog audio input connector (see figure 2 on the previous page) — Connect an
audio source to the 5-pole captive screw connector (see figure 3 for wiring details).
Unbalanced Audio Input
Balanced Audio Input
Tip
Ring
Tip
Ring
Slee
ves
Tip
Sleeve
Sleeve
Tip
LR
LR
Do not tin the wires!
Figure 3. Audio Input Wiring
Transmitter XTP interconnection
D
RS-232 Over XTP connector To pass bidirectional serial signals between
XTP-compatible devices, connect a control device to the 5-pole captive screw
connector. The connector includes only the two poles labeled “RS-232” and shares the
ground pole with the IR poles.
IR Over XTP connector — To transmit and receive IR signals (up to 56 kHz), connect
a control device to the 5-pole captive screw connector. The connector includes the
two poles labeled “IR” and shares the ground pole with the RS-232 poles.
NOTE: RS-232 and IR data can be transmitted or received simultaneously (see
RS-232 and IR Over XTP Communication on page 12 for wiring details).
E
XTP output connector — Connect an XTP twisted pair receiver or matrix switcher
(see Twisted Pair Cable Termination and Recommendations for XTP
Communication on page 10) to the RJ-45 XTP output connector. The cable carries
the following signals:
Digital video
Digital audio
Bidirectional RS-232 and IR commands
Remote power
Ethernet communication
System communication
Signal LED indicator — Lights green when the transmitter outputs an XTP
signal to a compatible receiver or matrix switcher.
Link LED indicator — Lights yellow when XTP devices are connected and
communication is established.
ATTENTION:
Do not connect this connector to a computer data or telecommunications
network.
Ne connectez pas cet connecteur à un réseau de télécommunications ou de
données informatiques.
XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see Remote power on
page 15).
XTP à distance est destiné à une utilisation en intérieur uniquement. Aucune
partie du réseau qui utilise l’alimentation XTP à distance ne peut être routée en
extérieur (voir Remote power à la page 15).
F
LAN connector — Connect a control or controlled device to the pass-through LAN
connector for 10/100Base-T Ethernet communication. LEDs on the connector indicate
link and activity status.
SignalLink
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation 7
Transmitter power connection
G
Power connector and LED (see figure 2 on page 5) — Connect the 12 V, 1.5 A power
supply to the 2-pole captive screw connector (see Power Connection on page 13).
The Power LED lights to indicate the device is receiving power. It is the same as the
front panel Power LED (see figure 12,
A
on page 16).
NOTE: The XTP T HD 4K can also be powered remotely (see Remote power on
page 15).
Receiver Rear Panel Connectors
POWER
12V
1.1A MAX
Rx GTx
RS-232 IR
XTP R HD 4K
RL
RxTx
-+
-+-+
1
2
AUDIO
ON
AUDIO
RESET
LAN
OVER XTP
OUTPUTS
RELAYS
SIG LINK
XTP IN
HDMI
OFF
S/PDIF
AB CDEFGH
A
XTP input connector (see below)
B
LAN connector (see the next page)
C
RS-232 and IR Over XTP connector
(see the next page)
D
HDMI output connector and audio
switch (see the next page)
E
Analog audio output connector
(see the next page)
F
S/PDIF output connector (see the next page)
G
Relay connector (see page 9)
H
Power connector and LED (see page 9)
Figure 4. XTP R HD 4K Rear Panel Connectors
Receiver XTP interconnection
A
XTP input connector — Connect an XTP twisted pair transmitter or matrix switcher
(see Twisted Pair Cable Termination and Recommendations for XTP
Communication on page 10) to the XTP input connector. The cable carries the
following signals:
Digital video
Digital audio
Bidirectional RS-232 and IR commands
Remote power
Ethernet communication
System communication
Signal LED indicator — Lights green when the receiver receives an XTP
signal from a compatible transmitter or matrix switcher.
Link LED indicator — Lights yellow when XTP devices are connected and
communication is established.
ATTENTION:
Do not connect this connector to a computer data or telecommunications
network.
Ne connectez pas cet connecteur à un réseau de télécommunications ou de
données informatiques.
XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see Remote power on
page 15).
XTP à distance est destiné à une utilisation en intérieur uniquement. Aucune
partie du réseau qui utilise l’alimentation XTP à distance ne peut être routée en
extérieur (voir Remote power à la page 15).
SignalLink
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation 8
B
LAN connector (see figure 4 on the previous page) — Connect a control or controlled
device to the receiver for 10/100Base-T Ethernet communication through this
pass-through connector. LEDs on the connector indicate link and activity status.
C
RS-232 Over XTP connector To pass bidirectional serial or other control signals
between XTP-compatible devices, connect a control device to the 5-pole captive screw
connector. The connector includes only the two poles labeled “RS-232” and shares the
ground pole with the IR poles.
IR Over XTP connector — To transmit and receive IR signals (up to 56 kHz), connect
a control device to the 5-pole captive screw connector. This connector includes only the
two poles labeled “IR” and shares the ground pole with the RS-232 poles.
NOTE: RS-232 and IR data can be transmitted or received simultaneously (see
RS-232 and IR Over XTP Communication on page 12 for wiring details).
Receiver output connections
D
HDMI output connector and audio switch — Connect a display device to the female
HDMI connector. To mute or unmute the embedded audio, hold the HDMI audio switch
up or down (see HDMI Audio Switch on page 17). The connector supports HDMI or
DVI (with an appropriate adapter) signals.
NOTES:
The maximum cable length for HDMI cables is 15 feet (4.6 meters).
Use an Extron LockIt Lacing Bracket to secure the HDMI connector to the
device (see HDMI Connection on the next page).
E
Analog audio output connector — Connect a balanced or unbalanced, stereo or
mono audio output device to the 3.5 mm, 5-pole captive screw connector (see figure 5
for wiring details).
Do not tin the wires!
Balanced Audio Output
Tip
Ring
Tip
Ring
Slee
ves
Unbalanced Audio Output
Tip
No Ground Here
No Ground Here
Tip
Sleeves
LR
LR
Figure 5. Audio Output Wiring
ATTENTION:
For unbalanced audio, connect the sleeves to the contact ground. Do not
connect the sleeves to the negative (-) contacts.
Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne pas
connecter les manchons aux contacts négatifs (–).
NOTE: If the device is receiving 2-channel LPCM embedded audio on the HDMI
input signal, the audio signal is extracted and converted to a stereo analog signal.
F
S/PDIF output connector — Connect an audio device to the female orange RCA
connector for digital S/PDIF audio output. The type of audio present on this output is
dictated by the following (see Audio Output Overview on page 18 for supported audio
formats on the S/PDIF output):
The audio format selected on the source material or device.
The source device automatically outputting an audio format through EDID.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation 9
Receiver relay connection
G
Relay connector (see figure 4 on page 7) — Connect equipment controlled through
momentary or latching contact, like projector screens or lifts, to the normally open
relays.
ATTENTION:
Do not exceed 24 V at 1.0 A for each port.
Ne pas dépasser 24volts à 1,0A pour chaque port.
Receiver power connection
H
Power connector and LED — Connect the 12 V, 1.5 A power supply to the 2-pole
captive screw connector. For wiring considerations, see Power Connection on
page 13. The Power LED lights to indicate the device is receiving power. It is the same
as the front panel Power LED (see figure 13,
A
on page 17).
NOTE: The XTP R HD 4K can also be powered remotely (see Remote power on
page 15).
Connection Details
HDMI Connection
To secure the HDMI cable to the HDMI connector, use an Extron LockIt Cable Lacing
Bracket and a tie wrap.
3
1
2
3
4
5
Figure 6. Installing the LockIt Lacing Bracket
1. Plug the HDMI cable into the panel connection (see figure 6,
1
).
2. Loosen the HDMI connection mounting screw from the panel (
2
) enough to place the
LockIt over it. The screw does not have to be removed.
3. Place the LockIt on the screw and against the HDMI connector (
3
), and then tighten
the screw to secure the bracket.
4. Loosely place the included tie wrap around the HDMI connector and the LockIt (
4
).
5. While holding the connector securely against the cable lacing bracket, use pliers or
similar tools to tighten the tie wrap. Remove any excess length (
5
).
ATTENTION:
Connect and pull the tie wraps until they are secure. Do not overtighten.
Connectez et tirez les serre-câbles jusqu’à ce qu’ils soient sécurisés. Ne pas
trop serrer.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation 10
Twisted Pair Cable Termination and Recommendations for XTP
Communication
Use the following pin configurations for twisted pair cables used for XTP communication.
12345678
RJ-45
Connector
Inser
t Twisted
Pair Wires
Pins:
Pin
1
2
3
4
5
6
7
8
Wire color
White-green
Green
White-orange
Blue
White-blue
Orange
White-brown
Brown
Wire color
T568A T568B
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
TIA/EIA-T568B
Pin Wire Color
1 White-orange
2 Orange
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
Figure 7. Twisted Pair Cable Termination
Supported cables
The transmitter and receiver XTP connectors are compatible with shielded twisted pair
(F/UTP, SF/UTP, and S/FTP) and unshielded twisted pair (U/UTP) cables.
ATTENTION:
Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201
cable to link the XTP products.
N’utilisez pas le câble AV Skew-Free UTP version améliorée UTP23SF d’Extron ou
le câble STP201 pour relier les produits XTP.
To ensure FCC Class A and CE compliance, STP cables and STP connectors are
required.
Afin de s’assurer de la compatibilité entre FCC Classe A et CE, les câbles STP et
les connecteurs STP sont nécessaires.
Cable recommendations
Extron recommends using the following practices for XTP communication to achieve full
transmission distances up to 330 feet (100 meters) and reduce transmission errors.
Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best
performance:
XTP DTP 24/1000 Non-Plenum 1000' (305 m) spool 22-236-03
XTP DTP 24P/1000 Plenum 1000' (305 m) spool 22-235-03
XTP DTP 24 Plug Package of 10 101-005-02
If not using XTP DTP 24 cable, at a minimum, Extron recommends 24 AWG, solid
conductor, STP cable with a minimum bandwidth of 400 MHz.
Terminate cables with shielded connectors to the TIA/EIA-T568B standard.
Limit the use of more than two pass-through points, which may include patch points,
punch down connectors, couplers, and power injectors. If these pass-through points
are required, use shielded couplers and punch down connectors.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation 11
NOTE: When using STP cable in bundles or conduits, consider the following:
Do not exceed 40% fill capacity in conduits.
Do not comb the cable for the first 20 m, where cables are straightened, aligned,
and secured in tight bundles.
Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.
Separate twisted pair cables from AC power cables.
Twisted Pair Cable Termination for Pass-Through Ethernet Communication
The twisted pair cable used for Ethernet communication depends on the network speed.
The LAN connectors support both 10Base-T (10 Mbps Ethernet) and 100Base-T
(100 Mbps Fast Ethernet), half-duplex and full-duplex Ethernet connections. Terminate
the RJ-45 connectors for Ethernet communcation with straight-through or crossover
termination standards.
NOTES:
Do not use standard telephone cables. Telephone cables do not support Ethernet
or Fast Ethernet.
To avoid transmission errors, do not stretch or bend the cables.
Straight-through (patch) cable — Wire both ends of the twisted pair cable with the
T568B standard. Use this to connect to a switch, hub, or router.
Crossover cable — Wire one end of the twisted pair cable with the T568A standard
and the other with the T568B standard. Use this to connect to a computer.
Straight-Through Cable
Pin End 1 Wire End 2 Wire
1 White-orange White-orange
2 Orange Orange
3 White-green White-green
4 Blue Blue
5 White-blue White-blue
6 Green Green
7 White-brown White-brown
8 Brown Brown
Crossover Cable
Pin End 1 Wire End 2 Wire
1 White-green White-orange
2 Green Orange
3 White-orange White-green
4 Blue Blue
5 White-blue White-blue
6 Orange Green
7 White-brown White-brown
8 Brown Brown
Figure 8. RJ-45 Pin Assignment
12345678
RJ-45 Connector
Insert T
wisted
Pair Wires
Pins:
Side View
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation 12
RS-232 and IR Over XTP Communication
The RS-232 and IR Over XTP connector passes serial signals (such as projector control
signals) and infrared data. To pass bidirectional serial command signals between
XTP-compatible devices, connect a control device to the three poles (Tx, Rx, and G) under
“RS-232” of the 5-pole captive screw connector. To transmit and receive IR signals, connect
a control device to the three poles (G, Tx, and Rx) under “IR.” The ground (G) pole is shared.
NOTE: RS-232 and IR data can be transmitted or received simultaneously (see figure 9
for wiring considerations).
Tx/Rx
Pins
RxTx
RS-232 IR
RxTx
TxRx
RxTx
IR Device
RS-232 Device
G
G
G
Figure 9. RS-232 and IR Over XTP Connector Wiring Configuration
ATTENTION:
The length of the exposed wires in the stripping process is critical. The ideal length
is 3/16 inch (5 mm).
If the exposed portion is longer, the wires may touch, causing a short circuit
between them.
If the exposed wires are shorter, they can be easily pulled out, even if tightly
fastened by the captive screws.
La longueur des câbles exposés est primordiale lorsque l’on entreprend de les
dénuder. La longueur idéale est de 5 mm (3/16 inches).
S’ils sont trop longs, les câbles exposés pourraient se toucher et provoquer un
court circuit.
S’ils sont trop courts, ils peuvent être tirés facilement, même s’ils sont
correctement serrés par les borniers à vis.
Do not tin the wires. Tinned wire does not hold its shape and can become loose
over time.
Ne pas étamer les câbles. Les câbles étamés ne sont pas aussi bien fixés dans les
borniers à vis et pourraient s’arracher.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49

Extron XTP R HD 4K Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues