Nexus 4X4 Quick Reference Manual

Nexus
Marque
Nexus
Modèle
4X4
Taper
Quick Reference Manual
Quick Reference Guide
English EN
Español ES
Français FR
Nexus™ 4x4 QRG EN
2
About this
Guide
The Nexus™ 4x4 Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options,
and DMX
values. Download the User Manual from www.chauvetprofessional.com
for more details.
Disclaimer
The information and specifications contained in this QRG are subject to
change without notice.
Safety Notes
• DO NOT open this product. It contains no user-serviceable parts.
• DO NOT look at the light source when the product is on.
• CAUTION: This product’s housing may be hot when lights are
operating.
• Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
• USE a safety cable when mounting this product overhead.
• DO NOT hang product using only the coffin locks.
•
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
• DO NOT operate this product if the housing, lenses, or cables appear
damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate
this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland or Mexico, contact your
distributor to request support or return a product. Visit
www.chauvetlighting.com for contact information.
What Is
Included
• Nexus™ 4x4
• Neutrik® powerCON® power cord
• #5 Allen key with handle
• Warranty card
• Quick Reference Guide
Nexus™ 4x4 QRG EN
3
AC Power
voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
not link more than:
• 4 products at 120 V,
• 7 products at 208 V, or
• 8 products at 230 V.
Power linking cords can be purchased separately.
Power Linking
Diagram
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground Green/Yellow Green/Yellow Green
Replacing the
Fuse
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3.
rating.
4. Screw the fuse holder cap back in place.
5. Reconnect the product to power.
Other Products
Nexus™ 4x4 QRG EN
4
DMX Linking
The Nexus™ 4x4 works in Master/Slave mode or with a DMX
controller using its DMX ports
. A DMX Primer is available from
www.chauvetprofessional.com.
DMX Linking
Diagram
DMX
Personalities
The Nexus™ 4x4 has 5 DMX personalities: 3-, 5-, 9-, 48-,
and 53-channel. For more information, see the DMX Values
in this
QRG, or the User Manual on the CHAUVET® website at
http://www.chauvetlighting.com/product-manuals-literature/.
Master/Slave
Mode
The Nexus™ 4x4 works in Master/Slave mode. For more
information, see the User Manual on the CHAUVET® website at
http://www.chauvetlighting.com/product-manuals-literature/.
Ethernet
Connections
Ethernet connections link Nexus™ 4x4 panels to routers and each other
through their Neutrik®
etherCON® ports. Ethernet connections are for
running TCP/IP-based control system, such as Kling-Net and Art-Net™
.
All Neutrik® etherCON® ports can be either input or output ports
, and
panels can be linked to each other, but the start
of each chain of panels
must be a router port.
DMX Controller or Master
Other
DMX Products
Nexus™ 4x4 QRG EN
5
Ethernet
Connections
Diagram
Kling-Net Mode
Kling-Net is a network protocol that uses TCP/IP to send DMX
over a network and into the Neutrik® etherCON® connection ports
of the Nexus™ 4x4 panels. Kling-
Net works seamlessly with
Kling-Net-supported ArKaos software
for configuring and mapping
display devices. For more information, see the User Manual on the
CHAUVET® website at http://www.chauvetlighting.com/product-
manuals-literature/.
Art-Net™ Mode
Art-Net™ is an Ethernet protocol that uses TCP/IP to send DMX
signals over a network and into the Neutrik®
etherCON® connection
ports of the Nexus™ 4x4 panels. Art-
Net™ requires configuration
through the control panel. For more information, see the Menu Map
in
this QRG or the User Manual on the CHAUVET® website at
http://www.chauvetlighting.com/product-manuals-literature/.
An Art-Net™ Primer is available from www.chauvetprofessional.com
.
Art-Net™ is designed and copyrighted by Artistic Licence Holdings Ltd.
Nexus™ 4x4 panels do not work with Art-Net™ controllers sending in
Broadcast mode. For information about the controller’s mode, see the
controller’s User Manual.
Reset To
Factory
Defaults
1. Disconnect the Nexus™ 4x4 from power.
2. Press and hold <MENU> and <ENTER> simultaneously.
3. Reconnect the Nexus™ 4x4 to power.
4. Release <MENU> and <ENTER>. The words Factory reset?
ENTER = Confirm show on the display.
5. Press <ENTER>.
NOTE: Do not use the router WAN port!
Router
Computer or Controller
Running TCP/IP-based
protocol, such as Kling-
Net
or Art-Net™
Nexus™ 4x4
Panels
More
Nexus™ 4x4 Panels
Nexus™ 4x4 QRG EN
6
Kling-Net
Mapper
Kling-Net Mapper is part of the ArKaos software package. It informs the
ArKaos software about the layout of the Nexus™ 4x4
products in a
process called mapping.
The following section provides step-by-
step instructions for mapping the
Nexus™ 4x4 products.
Part 1: Confirm
Network
Connectivity
1. Connect the ArKaos computer and Nexus™ 4x4s to the same
network. See Ethernet Connections Diagram
.
2. Set all the Nexus™ 4x4s to Kling-Net operating mode.
3. Open the ArKaos Kling-Net Mapper. All the Kling-Net devices
populate a list on the left side of the screen in the Connected Devices
window.
The Connected
Devices
Window
It can take up to 20 seconds for all the products to populate the list and the
color of the device’s listing provides information about its status.
Colors and Activity
Explanation
Black with an ID number and IP
address
There is connectivity and everything is
working properly, but the device is not yet
mapped.
Green with an ID number and IP
address
There is connectivity and everything is
working properly, and the device is mapped.
Black to red with no IP address
during initial population
The King-Net™ Mapper could not find an IP
address for the device, most likely because
the system is using an Ethernet switch
instead of an Ethernet hub.
Black to red after initial population The connectivity has been lost.
Part 2: Test
Network
Connectivity
1. Select the Output dropdown icon from the tool bar at the top of the
Kling-Net Mapper screen. One of the options will be Test Pattern.
2. Select Test Pattern. The image to the right of the icon is a small
screen, indicating that Test Pattern is the current mode.
3. Select the icon to the right of the Output dropdown icon. One of the
options will be Flashing Output Selection.
4. Select Flashing Output Selection. The icon is a faded green square
with an arrow, indicating that a flashing green light is the current test
pattern.
5. Left click once on an LED display product. The product flashes
green.
6. Repeat Step 4 for every product in the list.
Nexus™ 4x4 QRG EN
7
Part 3: Map The
Produ
cts For
ArKaos
1. Make sure the Nexus™ Aw 4x4 products are all listed in the
Connected Devices window and have flashed when tested. For more
information, see Part 1: Confirm Network Connectivity
.
2. Click on the first product in the list and drag it onto the mapping
image in the center of the screen. A shape representing the display
product shows on the mapping image. The product displays the
pattern on the mapping image.
3. Drag, rotate, and resize the shape on the mapping image until it is in
the position needed for the presentation layout.
4. Repeat Steps 2 thru 3 for every Nexus™ Aw 4x4 product.
5. Complete Parts 1 and 2.
6. Click on File in the ArKaos Media Mapper.
7. Click on Save As.
8. Save the file.
Remember the location of the file because the file must be loaded into
the ArKaos software.
Mounting
The Nexus™ 4x4 can be mounted in almost any orientation provided each
individual product is secured through the m
ounting bracket. The coffin
locks are for product alignment only and are not weight bearing. DO NOT
hang product using only the coffin locks.
Product
Mounting
Diagram
Nexus™ 4x4 QRG EN
8
Control Panel
Description
Button
Function
<MENU>
Scrolls through the main menu options or exits the current menu option.
<ENTER>
Enters into the highlighted menu option or sets the currently selected value.
<UP>
Navigates up through a list of menu options or values.
<DOWN>
Navigates down through a list of menu options or values.
Home Screen
The home screen on the control panel display shows the current operating state
as follows:
• <Master> if the Nexus™ 4x4 is in Standalone or Master mode
• <Slave> if the Nexus™ 4x4 is in Art-Net™, Kling-Net, or DMX mode
Exiting Auto
Show
And
Static Modes
Auto Show and Static modes are not exited automatically when another
mode is selected. To exit Auto Show or Static mode, do the following:
1. Go to the Master/Slave main level.
2. Select Slave.
3. Press <ENTER>.
4. Press <MENU> for 10 seconds.
Setting changes are not activated until the control panel display
returns to the home screen. To return the control panel display to the
home screen press and hold <MENU> for 10 secs.
Menu Map
Main Level
Programming Levels
Description
Auto Show
Auto 1–12
Show Speed
000–100
Selects an auto program and its speed
Fade
Selects color fade and its speed
Static
Fixture Color
R
Selects a preset color
G
B
GB
RB
RG
RGB
Manual Color
R
G
B
000–255
Sets color levels for manual color mixing
Dimmer Mode
Off
Sets dimming curve
Dimmer 1–3
Back Lite
On
Sets control panel backlight time
10S
20S
30S
Nexus™ 4x4 QRG EN
9
Main Level
Programming Levels
Description
Info
Fixture Hours
Shows total operating hours
Version
Shows software version
IP Address
Shows IP address
Device ID
Shows ID number
DMX Address
001–512
Sets DMX start channel for DMX mode
DMX Channel
3Ch
Sets DMX personality for DMX, Art-Net™
mode, and Kling-Net modes
5Ch
9Ch
48Ch
53Ch
Master/Slave
Master
Sets Master mode
Slave
Sets Slave mode
White
R
125–255
Sets the color mix that will be white
G
B
Fan Speed
Auto
Sets fan to slow down when product is cool
High
Sets fan to run continuously at high speed
Temperature
Shows the product’s internal temperature
Ethernet Settings Protocol
Kling-Net
Sets Kling-Net protocol
Art-Net
IP Mode
Manual
Sets product to use a manually set IP address
DHCP
Sets product to use dynamic IP addressing
Static
Sets product to use its internal IP address
Net
000–127
Sets the net address of the product
Subnet
00–15
Sets the subnet of the product
Universe
Sets the universe of the product
Nexus™ 4x4 QRG EN
10
DMX Values
53Ch
Channel
Function
Value
Percent/Setting
1
Red 1
000 ó 255
0–100%
Warm White 1
When values 011–020 in CH. 53 are
activated
2
Green 1
000 ó 255
0–100%
Cool White 1
When values 011–020 in CH. 53 are
activated
3
Blue 1
000
ó
255
0–100%
4
Red 2
000 ó 255
0–100%
Warm White 2
When values
011
–
020
in CH. 53 are
activated
5
Green 2
000 ó 255
0–100%
Cool White 2
When values 011–020 in CH. 53 are
activated
6
Blue 2
000
ó
255
0–100%
7
Red 3
000 ó 255
0–100%
Warm White 3
When values 011–020 in CH. 53 are
activated
8
Green 3
000 ó 255
0–100%
Cool White 3
When values 011–020 in CH. 53 are
activated
9
Blue 3
000
ó
255
0–100%
10
Red 4
000 ó 255
0–100%
Warm White 4
When values 011–020 in CH. 53 are
activated
11
Green 4
000 ó 255
0–100%
Cool White 4
When values 011–020 in CH. 53 are
activated
12
Blue 4
000
ó
255
0–100%
13
Red 5
000 ó 255
0–100%
Warm White 5
When values 011–020 in CH. 53 are
activated
14
Green 5
000 ó 255
0–100%
Cool White 5
When values 011–020 in CH. 53 are
activated
15
Blue 5
000
ó
255
0–100%
16
Red 6
000 ó 255
0–100%
Warm White 6
When values 011–020 in CH. 53 are
activated
17
Green 6
000 ó 255
0–100%
Cool White 6
When values 011–020 in CH. 53 are
activated
18
Blue 6
000
ó
255
0–100%
19
Red 7
000 ó 255
0–100%
Warm White 7
When values 011–020 in CH. 53 are
activated
Nexus™ 4x4 QRG EN
11
53Ch
Channel
Function
Value
Percent/Setting
20
Green 7
000 ó 255
0–100%
Cool White 7
When values 011–020 in CH. 53 are
activated
21
Blue 7
000
ó
255
0–100%
22
Red 8
000 ó 255
0–100%
Warm White 8
When values 011–020 in CH. 53 are
activated
23
Green 8
000 ó 255
0–100%
Cool White 8
When values 011–020 in CH. 53 are
activated
24
Blue 8
000
ó
255
0–100%
25
Red 9
000 ó 255
0–100%
Warm White 9
When values 011–020 in CH. 53 are
activated
26
Green 9
000 ó 255
0–100%
Cool White 9
When values 011–020 in CH. 53 are
activated
27
Blue 9
000
ó
255
0–100%
28
Red 10
000 ó 255
0–100%
Warm White 10
When values 011–020 in CH. 53 are
activated
29
Green 10
000 ó 255
0–100%
Cool White 10
When values 011–020 in CH. 53 are
activated
30
Blue 10
000
ó
255
0–100%
31
Red 11
000 ó 255
0–100%
Warm White 11
When values 011–020 in CH. 53 are
activated
32
Green 11
000 ó 255
0–100%
Cool White 11
When values 011–020 in CH. 53 are
activated
33
Blue 11
000
ó
255
0–100%
34
Red 12
000 ó 255
0–100%
Warm White 12
When values 011–020 in CH. 53 are
activated
35
Green 12
000 ó 255
0–100%
Cool White 12
When values 011–020 in CH. 53 are
activated
36
Blue 12
000
ó
255
0–100%
37
Red 13
000 ó 255
0–100%
Warm White 13
When values 011–020 in CH. 53 are
activated
38
Green 13
000 ó 255
0–100%
Cool White 13
When values 011–020 in CH. 53 are
activated
39
Blue 13
000
ó
255
0–100%
40
Red 14
000 ó 255
0–100%
Warm White 14
When values 011–020 in CH. 53 are
activated
Nexus™ 4x4 QRG EN
12
53Ch
Channel
Function
Value
Percent/Setting
41
Green 14
000 ó 255
0–100%
Cool White 14
When values 011–020 in CH. 53 are
activated
42
Blue 14
000
ó
255
0–100%
43
Red 15
000 ó 255
0–100%
Warm White 15
When values 011–020 in CH. 53 are
activated
44
Green 15
000 ó 255
0–100%
Cool White 15
When values 011–020 in CH. 53 are
activated
45
Blue 15
000
ó
255
0–100%
46
Red 16
000 ó 255
0–100%
Warm White 16
When values 011–020 in CH. 53 are
activated
47
Green 16
000 ó 255
0–100%
Cool White 16
When values 011–020 in CH. 53 are
activated
48
Blue 16
000
ó
255
0–100%
49 Auto Programs
000
ó
010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 190
191 ó 210
211 ó 230
231
ó
255
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Auto 11
Auto 12
50
Auto Speed
000
ó
255
When CH. 49 has Auto 01–12 activated
51 Dimmer
000 ó 255 0–100%
52 Strobe
000
ó
010
011
ó
255
No function
0–20 Hz
53 Dimmer Speed
000
ó
010
011 ó 020
021 ó 030
031 ó 051
052 ó 101
102 ó 152
153 ó 203
204
ó
255
Preset dimmer speed from display menu
WW/CW Mode On (hold for 5 sec.)
WW/CW Mode Off (hold for 5 sec.)
No function
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3 (slowest)
Nexus™ 4x4 QRG EN
13
48Ch
Channel
Function
Value
Percent/Setting
1
Red 1
000
ó
255
0–100%
2
Green 1
000
ó
255
0–100%
3
Blue 1
000
ó
255
0–100%
4
Red 2
000
ó
255
0–100%
5
Green 2
000
ó
255
0–100%
6
Blue 2
000
ó
255
0–100%
7
Red 3
000
ó
255
0–100%
8
Green 3
000
ó
255
0–100%
9
Blue 3
000
ó
255
0–100%
10
Red 4
000
ó
255
0–100%
11
Green 4
000
ó
255
0–100%
12 Blue 4
000 ó 255 0–100%
13
Red 5
000
ó
255
0–100%
14
Green 5
000
ó
255
0–100%
15
Blue 5
000
ó
255
0–100%
16
Red 6
000
ó
255
0–100%
17
Green 6
000
ó
255
0–100%
18
Blue 6
000
ó
255
0–100%
19
Red 7
000
ó
255
0–100%
20
Green 7
000
ó
255
0–100%
21
Blue 7
000
ó
255
0–100%
22
Red 8
000
ó
255
0–100%
23 Green 8
000 ó 255 0–100%
24
Blue 8
000
ó
255
0–100%
25
Red 9
000
ó
255
0–100%
26
Green 9
000
ó
255
0–100%
27
Blue 9
000
ó
255
0–100%
28
Red 10
000
ó
255
0–100%
29
Green 10
000
ó
255
0–100%
30
Blue 10
000
ó
255
0–100%
31
Red 11
000
ó
255
0–100%
32
Green 11
000
ó
255
0–100%
33
Blue 11
000
ó
255
0–100%
34 Red 12
000 ó 255 0–100%
35
Green 12
000
ó
255
0–100%
36
Blue 12
000
ó
255
0–100%
37
Red 13
000
ó
255
0–100%
38
Green 13
000
ó
255
0–100%
39
Blue 13
000
ó
255
0–100%
40
Red 14
000
ó
255
0–100%
41
Green 14
000
ó
255
0–100%
42
Blue 14
000
ó
255
0–100%
43
Red 15
000
ó
255
0–100%
44
Green 15
000
ó
255
0–100%
45
Blue 15
000
ó
255
0–100%
Nexus™ 4x4 QRG EN
14
48Ch
Channel
Function
Value
Percent/Setting
46
Red 16
000
ó
255
0–100%
47
Green 16
000
ó
255
0–100%
48
Blue 16
000
ó
255
0–100%
Pixel Layout for 48- and 53-Channel Modes
9Ch
Channel
Function
Value
Percent/Setting
1
Dimmer
000
ó
255
0–100%
2
Red
000 ó 255
0–100%
Warm White
When values 011–020 in CH. 9 are
activated
3
Green
000 ó 255
0–100%
Cool White 1
When values 011–020 in CH. 9 are
activated
4
Blue
000
ó
255
0–100%
5 Strobe
000
ó
010
011
ó
255
No function
0–20 Hz
1
2
3
4
5
6
7
8
9
10
11
12
14
15
16
13
Nexus™ 4x4 QRG EN
15
9Ch
Channel
Function
Value
Percent/Setting
6
Color Macro +
White Balance
000 ó 010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 200
201 ó 205
206 ó 210
211 ó 215
216 ó 220
221 ó 225
226 ó 230
231 ó 235
236 ó 240
241 ó 245
246 ó 250
251
ó
255
No function
R: 100% G: 0–100% B: 0
R: 100%–0 G: 100% B: 0
R: 0 G: 100% B: 0–100%
R: 0 G: 100%–0 B: 100%
R: 0–100% G: 0 B: 100%
R: 100% G: 0 B: 100%–0
R: 100% G: 0–100% B: 0–100%
R: 100%–0 G: 100%–0 B: 100%
R: 100% G: 100% B: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10
White 11
7 Auto Programs
000
ó
010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 190
191 ó 210
211 ó 230
231 ó 255
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Auto 11
Auto 12
8
Auto Speed
000
ó
255
When CH. 7 has Auto 01–12 activated
9 Dimmer Speed
000
ó
010
011 ó 020
021 ó 030
031 ó 051
052 ó 101
102 ó 152
153 ó 203
204
ó
255
Preset dimmer speed from display menu
WW/CW Mode On (hold for 5 sec.)
WW/CW Mode Off (hold for 5 sec.)
No function
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3 (slowest)
Nexus™ 4x4 QRG EN
16
5Ch
Channel
Function
Value
Percent/Setting
1
Dimmer
000
ó
255
0–100%
2
Red
000
ó
255
0–100%
3
Green
000
ó
255
0–100%
4
Blue
000
ó
255
0–100%
5 Strobe
000
ó
010
011 ó 255
No function
0–20 Hz
3Ch
Channel
Function
Value
Percent/Setting
1
Red
000
ó
255
0–100%
2
Green
000
ó
255
0–100%
3
Blue
000
ó
255
0–100%
Nexus™ 4x4 GRR ES
17
Acerca de esta
Guía
La Guía de Referencia Rápida (GRR) del Nexus™ 4x4 contiene
información básica sobre el producto, como conexión, montaje, opciones
de menú y valores DMX. Descargue el Manual de U
suario de
www.chauvetprofessional.com para información más detallada.
Exención de
Responsa-
bilidad
La información y especificaciones contenidas en esta GRR están sujetas a
cambio sin previo aviso.
Notas de
Seguridad
• NO abra este producto. No contiene piezas reparables por el usuario.
• NO mire a la fuente de luz cuando el producto esté encendido.
• CUIDADO: la carcasa de este producto puede estar caliente cuando
las luces están en funcionamiento.
• Monte este producto en una ubicación con ventilación adecuada,
al menos a 20'' (50 cm) de superficies adyacentes.
• NO deje ningún material inflamable a menos de 50 cm de este
producto mientras esté funcionando o conectado a la alimentación.
• USE un cable de seguridad cuando monte este producto en lo alto.
• NO cuelgue el producto usando solo los cierres de la caja.
• NO ponga en funcionamiento este producto en el exterior o en
cualquier ubicación en la que el polvo, calor excesivo, agua o
humedad puedan afectarlo.
• NO ponga en funcionamiento este producto si sospecha que la
carcasa, lentes o cables están dañados.
• NO conecte este producto a un atenuador o reostato.
• Conecte este producto SOLO a un circuito con toma de tierra y
protegido.
• Use SOLAMENTE los soportes de colgar/montar para mover este
producto
• En caso de un problema grave de funcionamiento, deje de usarlo
inmediatamente.
• La temperatura ambiente máxima es de 104 °F (40 °C). No haga
funcionar este producto a temperaturas más altas.
Contacto
Fuera de EE.UU, Reino Unido, Irlanda o México póngase en contacto con
su distribuidor para solicitar asistencia o devolver el producto. Visite
www.chauvetlighting.com para información de contacto.
Qué va
Incluido
• Nexus™ 4x4
• Cable de alimentación Neutrik®
powerCON®
• Llave Allen nº 5 con asa
• Tarjeta de garantía
• Guía de Referencia
Rápida
Nexus™ 4x4 GRR ES
18
Corriente
Alterna
50/60 Hz.
Alimentación en
Cadena
especificadas más abajo. No enlace más de:
• 4 productos a 120 V,
• 7 productos a 208 V, o
• 8 productos a 230 V.
Los cables de alimentación en cadena se pueden adquirir por separado.
Diagrama de
Alimentación en
Cadena
Enchufe CA
Conexión
Cable (EE.UU)
Cable (Europa)
Color del Tornillo
CA Cargado
Negro
Marrón
Amarillo/Bronce
CA Neutro
Blanco
Azul
Plata
CA Tierra
Verde/Amarillo
Verde/Amarillo
Verde
Sustitución del
Fusible
1. Desconecte el producto de la toma de corriente.
2. Con un destornillador de punta plane, desatornille la tapa del
portafusibles.
3. Quite el fusible fundido del portafusibles y sustitúyalo con otro del
mismo tipo y categoría.
4. Vuelva a atornillar la tapa del portafusibles en su sitio.
5. conecte de nuevo la alimentación.
Otros Productos
Nexus™ 4x4 GRR ES
19
Enlace DMX
El Nexus™ 4x4 funciona en modo Maestro/Esclavo o con
controlador DMX utilizando sus puertos DMX.
Hay un Manual DMX
disponible en www.chauvetprofessional.com.
Diagrama de
Enlace DMX
Personalidades
DMX
El Nexus™ 4x4 tiene 5 personalidades DMX: de 3, 5, 9, 48 y 53 canales.
Para más información, consulte Valores DMX en
esta GRR o
el Manual de U
suario en el sitio web de CHAUVET®
http://www.chauvetlighting.com/product-manuals-literature/.
Modo
Maestro/Esclavo
El Nexus™ 4x4 funciona en modo Maestro/Esclavo. Para más
información, descargue el Manual de Usuario del sitio web de CHAUVET®
http://www.chauvetlighting.com/product-manuals-literature/.
Conexiones
Ethernet
Las conexiones Ethernet enlazan los paneles del Nexus™ 4x4 a routers y
entre sí a través de sus puertos Neutrik®
etherCON®. Las conexiones
Ethernet son para que
funcione el sistema de control basado en el
protocolo TCP/IP, como Kling-Net y Art-Net™
. Todos los puertos
Neutrik® etherCON® pueden ser tanto de entrada como de salida, y los
paneles se pueden enlazar entre sí, pero el inicio de cada cadena de
paneles tiene que ser el puerto de un router.
Controlador DMX o Maestro
Otros
Products DMX
Nexus™ 4x4 GRR ES
20
Diagrama de
Conexiones
Ethernet
Modo Kling-Net
Kling-Net es un protocolo de red que utiliza TCP/IP para enviar
DMX a través de una red y a los puertos de conexión Neutrik®
etherCON® de los paneles del Nexus™ 4x4. Kling-
Net funciona
perfectamente con el software ArKaos para configurar y mapear
dispositivos de pantalla, para el que KlingNet tiene soporte. Para más
información, descargue el Manual de Usuario del sitio web de CHAUVET®
http://www.chauvetlighting.com/product-manuals-literature/.
Modo Art-Net™
Art-Net™ es un protocolo Ethernet que utiliza TCP/IP para enviar
señales DMX a través de una red y a
los puertos de conexión
Neutrik® etherCON® de los paneles del Nexus™ 4x4. Art-Net™
necesita configuración a través del panel de control. Para más
información, vea el Mapa de Menú en esta GRR o el M
anual de Usuario
en el sitio web de CHAUVET® http://www.chauvetlighting.com/product-
manuals-literature/.
Hay un Manual Art-Net™ disponible en www.chauvetprofessional.com
.
El diseño y copyright de Art-
Net™ es propiedad de Artistic Licence
Holdings Ltd.
Los paneles del Nexus™ 4x4
no funcionan con controladores
Art-Net™ que envían en modo Broadcast. Para ver información sobre el
modo del controlador, consulte el Manual de Usuario del controlador.
Reiniciar a la
Configuración
de Fábrica
1. Desconecte el Nexus™ 4x4 de la alimentación.
2. Pulse y mantenga pulsado <MENU> y <ENTER> simultáneamente.
3. Conecte de nuevo el Nexus™ 4x4 a la alimentación.
4. Suelte <MENU> y <ENTER>. Las palabras Factory reset?
ENTER = Confirm aparecen en la pantalla.
5. Pulse <ENTER>.
NOTA: ¡No utilice el puerto WAN del router!
Router
Ordenador o controlador
usando protocolo basado
en TCP/IP, como Kling-Net
o Art-Net™
Paneles de
Nexus™ 4x4
Más paneles de
Nexus™ 4x4
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Nexus 4X4 Quick Reference Manual

Nexus
Marque
Nexus
Modèle
4X4
Taper
Quick Reference Manual
Télécharger le PDF
rapport

dans d''autres langues

Autres documents