Braun BellaGlide Le manuel du propriétaire

contac[email protected]

www.silkn.com

INSTRUCTIONS FOR USE

MODE D’EMPLOI

INSTRUCCIONES DE USO

EN

ES

FR

BellaGlide

Beautiful Technology

TM

1-5 1-5 1-31-4 1-2

X

Energy Energy Energy Energy Energy

1-5 1-5 1-31-4 1-2

X

Energy Energy Energy Energy Energy

1

English

Quick Start

Plan your Silk’n BellaGlide hair removal for best results!

Treatments 1-4 - plan 2 weeks apart

Treatments 5-7 - plan four weeks apart

Treatments 8+ - treat as needed, until desired results are achieved.

Set up Silk’n BellaGlide!

. 1 Remove Silk’n BellaFlash HAIR REMOVAL UNIT and other components from box.

. 2 Plug the ADAPTOR cord into the Silk’n BellaFlash HAIR REMOVAL UNIT socket.

. 3 Plug the ADAPTOR into an electrical outlet. The STAND BY INDICATOR LIGHT will illuminate.

Treat with Silk’n BellaFlash safely and properly!

. 4 Choose areas to treat that have not had recent exposure to the sun.

. 5 The skin of the treatment areas should be shaved, clean, dry and free of any powders, antiperspirants

or deodorants. Do not wax, pluck or tweeze the hair out. Shaving is an important step to get the

results you want.

. 6 Press the CENTRAL BUTTON. The READY INDICATOR LIGHT (orange) will turn on and a fan

sound (similar to the sound of a hair dryer) will start.

. 7 Energy level 1 indicator light will turn on and the device is now ready to emit a pulse of light at the

lowest energy level.

Skin Test

Place the TREATMENT SURFACE on the skin and press the trigger to deliver one pulse. If you did

not experience abnormal discomfort after 24 hours, increase the energy level on your next test spot.

Continue testing at increased energy levels until you have reached the highest level that you feel

comfortable with. If after 24 hours at the tested level you experience no adverse eects you can start

your treatment at that energy level.

Wait 24 hours after the test and if you experience no adverse eects, you can start your full

treatment at that energy level. Repeat this test for each body part you intend to treat.

BellaGlide NA 1267B inside ED74-02 release.indd 1 10/30/2016 05:39:01 PM

2

English

If your skin blisters or burns, stop use immediately.

Set the energy level

. 8 Apply the TREATMENT SURFACE to the skin, making sure the skin is spread evenly and smoothly. As

soon as the TREATMENT SURFACE is in full contact with the skin, the READY INDICATOR LIGHT

will start blinking.

. 9 Press the PULSE BUTTON. The device will ﬁrst determine the color of your skin. If the color of the

skin is light enough for safe application, the device will ﬂash a pulse of light onto your skin, and the

READY INDICATOR LIGHT will turn o. You will see a bright ﬂash of light and simultaneously hear a

subtle pop sound, which is a normal noise for the device. You will feel a mild sensation of warmth and

tingling. Silk’n BellaFlash will immediately recharge for the next pulse.

. 10 Move the TREATMENT SURFACE to another area of skin avoiding gaps and overlaps between pulses.

. 11 Repeat the process until the entire treatment area is covered.

BellaGlide NA 1267B inside ED74-02 release.indd 2 10/30/2016 05:39:01 PM

1

English

Print date: 06/2016

Home Skinovations Ltd. reserves the right to make changes to its products or speciﬁcations to improve performance, reliability,

or manufacturability. Information furnished by Home Skinovations Ltd. Is believed to be accurate and reliable at the time of

publication. However, Home Skinovations Ltd. assumes no responsibility for its use. No license is granted by its implication or

otherwise under any patent or patent rights of Home Skinovations Ltd.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any

purpose, without the express written permission of Home Skinovations Ltd.

Data is subject to change without notiﬁcation. Home Skinovations Ltd. has patents and pending patent applications, trademarks,

copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document

does not give you any license to these patents, trademarks, copyrights, or other intellectual property rights except as expressly

provided in any written agreement from Home Skinovations Ltd. Speciﬁcations are subject to change without notice.

Home Skinovations Ltd. Tavor Building, Shaar Yokneam POB 533, Yokneam 2069206, ISRAEL www.silkn.com, [email protected]

1. What is BellaGlide? ............................................................................................................................................................................................. 2

1.1.BellaGlide device description ................................................................................................................................................................................. 2

1.2. Package contents ............................................................................................................................................................................................................... 2

2. Silk’n BellaGlide Intended Use .............................................................................................................................................................................. 3

3. Safety with BellaGlide .................................................................................................................................................................................................. 3

4. Contraindications ................................................................................................................................................................................................................ 3

5. When to avoid using BellaGlide? ......................................................................................................................................................................... 6

6. Precautions – How to use BellaGlide Safely .................................................................................................................................................... 7

7. Reducing the risk of injury .............................................................................................................................................................................................. 8

8. Risks of using BellaGlide .............................................................................................................................................................................................. 9

9. Long Term Hair Removal the BellaGlide Way .............................................................................................................................................. 11

10. How To Use BellaGlide ...................................................................................................................................................................................... 12

10.1. BellaGlide Setup .................................................................................................................................................................................................... 12

10.2. Treating with BellaGlide for the ﬁrst time ............................................................................................................................................. 12

10.3. What to expect when treating with BellaGlide? ................................................................................................................................ 14

10.4. After treating with BellaGlide ..................................................................................................................................................................... 15

11. BellaGlide Maintenance ........................................................................................................................................................................................ 15

11.1. Cleaning BellaGlide ............................................................................................................................................................................................. 15

12. Troubleshooting ........................................................................................................................................................................................................... 16

12.1. “My BellaGlide does not start.” ...................................................................................................................................................................... 16

12.2. “A light pulse is not emitted when I press the Pulse trigger.” ....................................................................................................... 16

13. Customer Service ........................................................................................................................................................................................................ 17

14. Speciﬁcations .................................................................................................................................................................................................................. 17

15. Labeling ............................................................................................................................................................................................................................... 54

16. IEC 60601-1-2 Declaration .................................................................................................................................................................................... 55

Table of Contents

BellaGlide NA 1267B inside ED74-02 release.indd 1 10/30/2016 05:39:02 PM

2

English

1.2 Package contents

Upon opening the BellaGlide package, you will ﬁnd the following parts:

BellaGlide Hair Removal device with TREATMENT SURFACE

AC cord Adaptor

This User Manual

Storage case

1. What is BellaGlide?

Before using BellaGlide

TM

for the ﬁrst time, please read this User Manual in its entirety. Pay particular

attention to procedures for using and operating the device and after-use procedures.

We recommend you re-familiarize yourself with this User Manual before each use of BellaGlide.

BellaGlide is a powerful electrical device. As such, it should be used with special attention

to safety. Please read all warnings and safety precautions before use, and strictly follow

them when using BellaGlide.

4

5

6

7

2

1

3

BellaGlide is a light-based device for long-

term hair removal, designed for home-use.

1.1 Silk’n BellaGlide device description

The Silk’n BellaGlide HAIR REMOVAL

DEVICE has a TREATMENT SURFACE, a

CONTROL PAD and a PULSE TRIGGER.

Control pad

Pulse Trigger

Skin Color Sensor

Treatment Surface

1

4

2

3

6

5

7

Central button

Energy level indicator lights

Ready/Skin tone warning

indicator light

On the Hair Removal device, you can ﬁnd

the BellaGlide Control Pad including a central Button which is also the Energy Level Setting Button, and

POWER, Energy Level, Ready, and System Warning Indicator Lights.

BellaGlide NA 1267B inside ED74-02 release.indd 2 10/30/2016 05:39:02 PM

3

English

2. Silk’n BellaGlide Intended Use

3. Safety with BellaGlide

4. Contraindications

HPL technology in BellaGlide - Superior safety with lower energy level:

Home Pulsed Light technology is able to achieve long-term hair removal results at a fraction of the

energy level used in other light-based hair removal equipment. The low energy used in BellaGlide reduces

its potential to cause harm or complications, and contributes to your overall safety.

BellaGlide protects your eyes: The BellaGlide Hair Removal Device is intended for use below the cheekbones

but not around the eyes. HPL light can be harmful to the eyes even when not pointed directly at them. To

protect your eyes from such harm the BellaGlide Hair Removal Device has a built-in safety feature for eye

protection. It has been designed so that a light pulse cannot be emitted when the treatment surface is facing

open air. The Pulse Trigger is enabled only when the treatment surface is in full contact with the skin.

BellaGlide protects your skin: BellaGlide comes with a Skin Color Sensor enabling use only on suitable

skin complexions to ensure skin safety. Furthermore, the 0.9X3cm² Optical Lens through which pulses of

light are delivered is recessed inside the device’s treatment surface. This enables BellaGlide to protect your

skin by avoiding direct contact between the optical lens and the skin.

BellaGlide is not designed for everyone. Please read and consider the information in the following section

before use. For further information and personalized advice, you may also visit www.silkn.com or your local

BellaGlide domain.

If you are unsure if BellaGlide is safe for you to use, please ask your doctor or dermatologist!

Important Safety Information – Read Before Use!

Silk’n BellaGlide is intended for removal of unwanted hair. Silk’n BellaGlide is also intended to eect long term,

or permanent hair reduction. The BellaGlide device is also intended for permanent reduction in hair regrowth,

deﬁned as the long-term, stable reduction in the number of hairs regrowing when measured at 6, 9, and 12

months after the completion of a treatment regime.

DO NOT USE BellaGlide on a naturally dark skin complexion!

BellaGlide NA 1267B inside ED74-02 release.indd 3 10/30/2016 05:39:02 PM

4

English

A unique Skin Color Sensor is embedded in BellaGlide to measure the treated skin complexion at the

beginning of each session and occasionally during the session. This Skin Color Sensor ensures that a pulse

will be emitted only on suitable skin tones (refer to the color chart on the manual cover).

BellaGlide removes unwanted hair by selectively addressing hair pigment. Varied quantities of pigment

also exist in the surrounding tissue of skin. The quantity of pigment in a particular person’s skin, which is

manifested by their skin complexion, determines the degree of risk they are exposed to using BellaGlide.

Treating dark skin with BellaGlide can result in adverse eects such as burns, blisters, and skin color changes

(hyper- or hypo-pigmentation)

Tanned skin, particularly following sun exposure, contains large quantities of the pigment Melanin. This

applies to all skin types and complexions, including those which don’t seem to tan quickly. The presence of

large quantities of Melanin exposes the skin to higher risk when using BellaGlide.

Using BellaGlide on skin that has been recently exposed to sunlight can result in adverse eects such as

burns, blisters, and skin color changes (hyper- or hypo-pigmentation).

DO NOT USE BellaGlide on naturally dark skin!

DO NOT USE BellaGlide on tanned skin or after recent sun exposure! Such use

can cause burns or skin injury.

Avoid exposure to the sun for 4 weeks before your BellaGlide treatment!

DO NOT USE BellaGlide on tanned skin or after recent sun exposure!

1-5 1-5 1-31-4 1-2

X

Energy Energy Energy Energy Energy

BellaGlide NA 1267B inside ED74-02 release.indd 4 10/30/2016 05:39:02 PM

5

English

Never use Silk’n BellaGlide around or near the eyes – Glide can be used only

from the cheekbones down.

Do not use the Silk’n BellaGlide Device anywhere on the ears, nipples, or genitals,

or around the anus. These areas may have more sensitive skin, a darker skin tone,

and/or a greater hair density, and using the Silk’n BellaGlide device there may

cause serious skin injury.

Do not use the Silk’n BellaGlide device on man’s face, jaw, or neck. The hair in a

man’s beard area is too dense, and using the Silk’n BellaGlide device in these areas

may result in skin injury.

The BellaGlide device is not eective on naturally white, grey, blond and red body hair. If your body hair is

of these colors, BellaGlide will not work on you.

Hair removal by lasers or intense pulse light sources can cause increased hair growth in some individuals.

Based upon currently available data, the highest risk groups for this response are females of Mediterranean,

Middle Eastern and South Asian heritage treated on the face and neck.

BellaGlide NA 1267B inside ED74-02 release.indd 5 10/30/2016 05:39:02 PM

6

English

5. When to avoid using BellaGlide?

Certain conditions may prevent the use of BellaGlide temporarily. DO NOT USE BellaGlide if any of the

following currently apply to you:

If you are pregnant or nursing (lactating).

If you were exposed to strong sunlight or an artiﬁcial tanning machine during the past 4 weeks.

If you have a tattoo or permanent makeup on the area to be treated.

If you have dark brown or black spots, such as large freckles, birth marks, moles or warts on the area to

be treated.

If you have eczema, psoriasis, lesions, open wounds or active infections, such as cold sores in the area to

be treated. Wait for the aected area to heal before using BellaGlide.

If you have a history of kelodial scar formation, a known sensitivity to light (photosensitivity) or are taking

medication that makes the skin more sensitive to light, including non-steroidal anti-inﬂammatory agents,

(e.g., aspirins, ibuprofens, acetaminophen), tetracyclines, phenothiazines, thiazide, diuretics, sulfonyluraes,

sulfonamides, DTIC, ﬂuorouracil, vinblastine, griseofulvin, Alpha-Hydroxi Acids (AHAs), Beta-Hydroxi

Acids (BHAs), Retin-A

®

, Accutane

®

and/or topical retinoids.

If you have abnormal skin conditions caused by diabetes, for example, or other systemic or metabolic diseases.

If you are currently or have recently been treated with Alpha-Hydroxi Acids (AHAs), Beta-Hydroxi Acids

(BHAs), Retin-A

®

, topical retinoids or azelaic acid.

If you have been treated with Accutane® (isotretinoin) within the past 6 months.

If you have been on a steroid regimen within the past 3 months.

If you have a history of herpes outbreaks in the area of treatment, unless you have consulted your

physician and received preventative treatment before using BellaGlide.

If you suer from epilepsy.

If you have an active implant, such as a pacemaker, incontinence device, insulin pump, etc.

If you have a disease related to photosensitivity, such as porphyria, polymorphic light eruption, solar

urticaria, lupus, etc.

If you have a history of skin cancer or areas of potential skin malignancies.

If you have received radiation therapy or chemotherapy treatments within the past 3 months.

If you have any other condition which in your physician’s opinion would make it unsafe for you to be treated.

If you are unsure if BellaGlide is safe for you to use, please consult with your doctor or dermatologist.

BellaGlide NA 1267B inside ED74-02 release.indd 6 10/30/2016 05:39:02 PM

7

English

6. Precautions – How to use BellaGlide Safely

Choose your energy levels CAREFULLY!

Energy level refers to the intensity of the light pulse that is projected on your skin during use, from the

lowest level to the highest level. Indicator lights on the control pad illustrate the energy level at which

the machine is set. As the energy level increases, so do the results of BellaGlide as well as the risk of side

eects (see section 8 -“Risks of Using Silk’n BellaGlide”).

Always begin your ﬁrst use of BellaGlide at the lowest energy setting!

Only if you experience little or no discomfort during and after use of BellaGlide at the lowest energy

setting, raise the energy level by one indicator light the next time you use BellaGlide, and so on for each

subsequent hair removal session. Treat at a level that is comfortable for your skin.

For detailed instructions on energy level setting, see “Energy Level” box in section 10.2 - “Treating with

BellaGlide for the ﬁrst time”.

Avoid adverse eects!

Do not treat the same area of skin more than once per hair removal session!

Try to avoid overlapping pulses!

If your skin blisters or burns, STOP USE IMMEDIATELY!

Avoid complications after use of BellaGlide!

Do not expose treated areas of skin to the sun!

Sun exposure includes constant unprotected exposure to direct sunlight for over 15 minutes, or constant

unprotected exposure to diuse sunlight for over 1 hour.

To protect recently treated skin when exposed to sunlight, be sure to thoroughly apply sunscreen SPF 30

or higher, for 2 weeks after each hair removal session.

Always shave the area to be treated and make sure that the skin is clean and dry before using BellaGlide.

Cover birthmarks and tattoos before BellaGlide application.

Cover dark brown or black spots, such as large freckles, birth marks, moles or warts before BellaGlide

application.

Never look directly at the light coming from the BellaGlide treatment surface.

Do not use BellaGlide on nipples and genitals (male or female).

Do not use BellaGlide on any body site where you might later want hair.

Do not use BellaGlide for any purpose other than hair removal.

Never point the BellaGlide treatment surface in an attempt to emit a light pulse into open space. Always

make sure that the surface is pointed at, and in full contact with the skin during application.

BellaGlide NA 1267B inside ED74-02 release.indd 7 10/30/2016 05:39:02 PM

8

English

Remove the BellaGlide treatment surface from the skin if either the skin or the surface is too hot.

Never use ﬂammable liquids such as alcohol (including perfumes, sanitizers, or other applications containing

alcohol) or acetone to clean the skin before using BellaGlide.

Use of BellaGlide may cause temporary pigmentation changes (See section 8 -“Risks of Using Glide”).

Keep this device out of the reach of children. Do not use BellaGlide on children or allow children to use it.

7. Reducing the risk of injury

As with any electrical device, certain precautions must be taken in order to ensure your safety when

using BellaGlide.

BellaGlide is an electrical device. As such it should always be kept away from water.

Do not place or store BellaGlide where it can fall or be pushed into a tub, sink or any other vessel containing

water. Do not place in, or drop into water or any other liquid.

This may cause severe electrocution.

Do not use BellaGlide while bathing.

Do not use BellaGlide if it becomes damp or wet.

Do not reach for BellaGlide if it has fallen into water.

Unplug BellaGlide immediately if it has fallen into water.

Keep BellaGlide away from water! Unplug BellaGlide immediately if it has fallen into water.

Keep BellaGlide away from water!

No modiﬁcation of this equipment is allowed!

Never open BellaGlide!

Do not attempt to open or repair your BellaGlide device. Opening BellaGlide may expose you to dangerous

electrical components and to pulsed light energy, either of which may cause bodily damage and/or eye injury.

BellaGlide NA 1267B inside ED74-02 release.indd 8 10/30/2016 05:39:02 PM

9

English

8. Risks of using BellaGlide

Side eects and complications associated with the use of BellaGlide according to its instructions are

uncommon. However every cosmetic procedure, including those designed for home use, involves some

degree of risk. Therefore it is important that you understand and accept the risks and complications that can

occur with pulsed light hair removal systems designed for home use.

Do not attempt to open or repair your BellaGlide device. Only authorized

BellaGlide repair centers are permitted to perform repairs.

Trying to open BellaGlide may also damage the device and will void your warranty.

Please contact BellaGlide Customer Service if you have a broken or damaged device in need of repair.

Use BellaGlide only for its intended use and as described in its manual.

BellaGlide should never be left unattended when plugged into an outlet.

Do not operate BellaGlide if it has a damaged cord or plug and keep the power cord away from heated

surfaces.

Do not use BellaGlide if you see or smell smoke when it is in use.

Do not use BellaGlide if it is not working properly or if it appears damaged.

Do not use BellaGlide if the fan vent in its treatment surface is cracked, coming o or missing.

Do not use BellaGlide if the Skin Color Sensor is cracked, or broken.

Do not use BellaGlide if the outer shell is cracked or coming apart.

Always unplug BellaGlide from the electrical outlet immediately after use.

Unplug BellaGlide before cleaning.

Do not use BellaGlide with any attachments or accessories not recommended by Home Skinovations Ltd.

BellaGlide must be operated only with its designated adaptor (for details on the right adaptor to use

please see chapter 14 – “Speciﬁcations”)

BellaGlide NA 1267B inside ED74-02 release.indd 9 10/30/2016 05:39:02 PM

10

English

Adverse Event Likelihood of the

Adverse Event

Adverse Eect Likelihood of the

Adverse Eect

Stacking or

Overlapping of

multiple pulses on

the same skin spot

Minor

Minor Skin Discomfort Minor

Skin Redness Minor

Increased Sensitivity of the Skin Minor

Skin Wounds and Burns Rare

Scarring Rare

Pigment Changes Rare

Excessive Redness and Swelling Rare

Infection Negligible

Bruising Negligible

Minor Skin Discomfort

Although home pulsed light hair removal is generally very well-tolerated, most users do feel some mild

discomfort during use, usually described as being a mild stinging sensation on the treated skin areas. The

stinging sensation usually lasts during the application itself or for a few minutes thereafter. Anything beyond

this minor discomfort is abnormal and means that either you should not continue to use BellaGlide because

you are unable to tolerate the hair removal application, or that the energy level setting is too high.

Skin Redness

Your skin may become red right after using BellaGlide or within 24 hours of using BellaGlide. Redness

generally clears up within 24 hours. See your doctor if redness does not go away within 2 to 3 days.

Increased Sensitivity of the Skin

The skin of the treated area is more sensitive so you may encounter dryness or ﬂaking of the skin.

Skin Wounds and Burns

Very rarely, burns or wounds to the skin can occur following the application. The burn or wound can

require a few weeks to heal and, extremely rarely, may leave a noticeable scar.

Scarring

Although very rare, scarring may occur. Usually when scarring occurs, it is in the form of a ﬂat and white

lesion on the skin (hypotrophic). However, it can be large and red (hypertrophic) or large and extend

beyond the margins of the injury itself (keloid). Subsequent aesthetic treatments may be required to

improve the appearance of the scar.

Pigment Changes

BellaGlide targets the hair shaft, in particular the pigmented cells in the hair follicle and the hair follicle

itself. Nevertheless, there is risk of temporary hyperpigmentation (increased pigment or brown

discoloration) or hypopigmentation (whitening) to the surrounding skin. This risk of changes in skin

pigmentation is higher for people with darker skin tones.

BellaGlide NA 1267B inside ED74-02 release.indd 10 10/30/2016 05:39:02 PM

11

English

A typical full hair growth cycle may take 18-24 months. During this time multiple BellaGlide sessions may be

required in order to achieve permanent hair removal.

The eciency of hair removal varies from person to person according to body area, hair color, and how

Silk’n BellaGlide is used.

Typical Silk’n BellaGlide hair removal plan during a full hair growth cycle:

Treatments 1-4 – plan two weeks apart

Treatments 5-7 – plan four weeks apart

Treatments 8 + – treat as needed, until desired results are achieved.

9. Long Term Hair Removal the BellaGlide Way

Fitzpatrick

skin type

Hair Color

Light Fluence

[J/cm

2

]

Anatomic area

of the body

2

Average Number of

Treatments

1

Eectiveness (% of hair

removal/regrowth)

1

I-IV

Light brown to

brown

2.5-4

Lower or upper legs 60% Hair reduction

Arms Session 10-12, approx. 50% Hair reduction

Bikini Line four weeks apart. 60% Hair reduction

Underarms 55% Hair reduction

I-IV Brown to black 2.5-4

Lower or upper legs 70% Hair reduction

Arms Session 8-10, approx. 60% Hair reduction

Bikini Line four weeks apart. 70% Hair reduction

Underarms 65% Hair reduction

Usually discoloration or changes to skin pigment are temporary and hyperpigmentation or

hypopigmentation rarely occur.

Excessive Redness and Swelling

In rare cases, treated skin may become very red and swollen. This is more common in sensitive areas of

the body. The redness and swelling should subside within 2 to 7 days and should be treated with frequent

applications of ice. Gentle cleansing is OK, but one should avoid exposure to sun.

Infection

Infection of the skin is exceedingly rare but is still a possible risk following a skin burn or wound caused

by BellaGlide.

Bruising

Very rarely, use of BellaGlide may cause blue-purple bruising that can last 5 to 10 days. As the bruising

fades, there may be a rust-brown discoloration of the skin (hyperpigmentation).

Expected Treatment Outcome for Hair Removal

BellaGlide NA 1267B inside ED74-02 release.indd 11 10/30/2016 05:39:02 PM

12

English

1. Individual response depends on hair type as well as biological factors that may aect hair growth patterns. Some users may respond quicker or slower

than the average number of treatments.

2. One cannot expect permanent epilation in a single or even double treatment sessions. The duration of the resting period for hair follicles also

depends on the body area.

10. How To Use BellaGlide

10.1. BellaGlide Setup

1. Remove the BellaGlide hair removal device, and other components from box.

2. Plug the power cord into the BellaGlide Device socket.

3. Plug the other end of the power cord into an electrical outlet.

4. All six LED lights will blink on and o, one after the other, in a circle.

Your BellaGlide is now ready to start.

10.2. Treating with BellaGlide

1. The skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants.

2. Press the central button brieﬂy. The Energy level 1 led will turn on.

About 1 second later, the Ready Indicator Light will turn on. The device is now set to deliver the lowest energy

level pulses. The device is ready for you to trigger the ﬁrst pulse.

3. If you wish to change the energy level, press the CENTRAL BUTTON quickly and repeatedly to increase the

energy level from 1 to 5 and from 5 directly back to 1, cyclically, until the desired energy level is set. The Energy

Level indicator Lights will indicate the energy level setting. (See “Energy Level” frame).

Energy Level

Energy level determines the intensity of the BellaGlide light pulse delivered to your skin, from the lowest

level (1) to the highest level (5). Corresponding indicator lights on the control panel represent the

increases in energy. As energy level increases, so do hair removal results as well as the risk of possible

side eects and complications.

Always start your ﬁrst BellaGlide hair removal session at the lowest energy setting.

If you experience little or no discomfort during and after the hair removal session using the lowest energy

level, raise the energy level by one indicator light at the next session, and so on for each subsequent session.

Do not raise the energy level if you experience abnormal discomfort during or after

treating with BellaGlide (See section 8 - “Risks of Using Glide”).

Do not raise the energy level during a hair removal session even if you experience no

discomfort. Discomfort may also appear sometime after the session.

BellaGlide NA 1267B inside ED74-02 release.indd 12 10/30/2016 05:39:02 PM

13

English

Whenever BellaGlide is turned on; its energy level will automatically be reset to the lowest energy level.

Only one Energy Level indicator Light will be on.

To set the energy level, press the central Button repeatedly to increase the energy level. After reaching level

5, an additional press will bring the level back down to Level 1. The number of Energy Level indicator Lights

will coincide with the change in energy level.

4. Apply the TREATMENT SURFACE to the skin, making sure the skin is spread evenly and smoothly and

the TREATMENT SURFACE is in full contact with the skin. Make sure the Ready Indicator Light starts

blinking slowly.

5. Press the Pulse Trigger. The device will ﬁrst determine the color of your skin.

If the color of the skin is light enough for safe application, the device will ﬂash a pulse of light onto your

skin. You will see a bright ﬂash of light and simultaneously hear a subtle pop sound, which is a normal

noise for the device. You may feel a mild sensation of warmth and tingling.

BellaGlide will immediately recharge for the next pulse. After a few seconds (depending on the set

energy level) the Ready Indicator Light will turn on again and start blinking.

If you see no light pulse, and the Ready Indicator Light blinks rapidly, this is now the SKIN COLOR

WARNING INDICATOR LIGHT alerting that your skin tone is too dark for safe application. Try using

the device on a dierent body part or contact Silk’n support.

6. Move the TREATMENT SURFACE to another area of skin.

Administer one pulse at a time at your chosen energy level. Use the pressure marks the device just made in

your skin to guide you for proper positioning of the next pulse, avoiding both gaps and overlaps between pulses.

BellaGlide can be applied in two ways: “Pulsing” and “Gliding”.

7. Repeat the process starting again with Step 5.

PULSING

When Pulsing, administer one pulse at a time at your chosen energy level. Use

the pressure marks the device just made in your skin to guide you for proper

positioning of the next pulse, avoiding both gaps and overlaps between pulses.

Covering skin areas

Treatments should be administered in rows, starting at one end of each row and

progressing sequentially towards the other end. This technique allows better

control of skin coverage, and helps you avoid treating the same area more than

once or overlapping skin areas. Ideal body areas for BellaGlide use include the

underarms, bikini line, arms and legs and below the cheekbones.

Try to avoid overlapping pulses!

Do not treat the same area of skin more than once per hair removal session!

BellaGlide NA 1267B inside ED74-02 release.indd 13 10/30/2016 05:39:02 PM

14

English

If your skin blisters or burns, STOP USE IMMEDIATELY!

10.3. What to Expect when treating with BellaGlide?

For many people, using BellaGlide may be their ﬁrst experience with a light-based device designed for home

use. BellaGlide is simple to use, and hair removal sessions go by quickly. During a BellaGlide session it is normal

to experience and feel:

A Flash of Light – The bright light of BellaGlide will not harm the eyes. Nevertheless, do not use the device

around or near your eyes.

A Fan Noise – The cooling fan in BellaGlide sounds similar to a hairdryer. This is normal.

A Pop Sound with Each Pulse – When a pulse of HPL light is activated, it is normal to hear a subtle pop

sound simultaneously with the ﬂash of light.

Moderate Pressure of the Treatment area – This is necessary and helpful for placement of adjacent pulses

of light, and is part of the unique safety features of BellaGlide.

A Sensation of Warmth and Tingling – During each pulse of light, it is normal to feel a mild sensation of

warmth and tingling from the light energy. Remember it is important to always use low energy settings for

initial hair removal sessions. You may feel some warmth for up to an hour after your BellaGlide session.

Some Mild Red or Pink Color – During and just after your BellaGlide session it is not uncommon to see

some very mild, pink-like color of the skin. This is usually most noticeable around the hairs themselves.

However if you see full redness of the skin, blistering or burns, stop use of BellaGlide immediately.

GLIDING

Alternatively, if you choose the Gliding method, hold the PULSE TRIGGER down continuously, and

slide the device smoothly along the treated area. Please note that this method is best applied when

working with low energy pulses. This way, the device takes only 1-1.5 seconds to recharge between

pulses and provides a nonstop sequence of ﬂashes.

In both methods of treatment you are cautioned not to treat the same area of skin more than once

per hair removal session! Treating the same area of skin more than once per session increases the

likelihood of adverse eects.

Gliding should be applied while holding the PULSE TRIGGER down continuously, and using a light

sliding motion, smoothly moving the device along the treated area. The treatment is then

administered quickly and more eciently. Even though Gliding is usually done using low energy

pulses for fast recharge, it is still essential to control skin coverage and avoid double treatments.

When applied to the skin, the BellaGlide TREATMENT SURFACE is designed to create temporary

pressure marks on the treated area. These visible marks can be used for proper positioning of the

device for treatment sessions.

BellaGlide NA 1267B inside ED74-02 release.indd 14 10/30/2016 05:39:02 PM

15

English

Skin care following hair removal session

Do not expose the treated areas of skin to the sun. Be sure to carefully protect the

treated skin with sunscreen, throughout the hair removal period and for at least 2 weeks

following the last BellaGlide session.

Side eects and complications

Some patients may experience pigmentation changes resulting from treating with BellaGlide. These eects, if

they occur, are generally mild and transient.

10.4. After treating with BellaGlide

When a BellaGlide session has been completed, turn BellaGlide with an extended press of the CENTRAL

BUTTON. Be sure to remember the last energy level setting you used, as it will not be restored when turning

BellaGlide on again.

Unplug the power cord from the electrical outlet.

After each hair removal session, it is recommended that you clean your BellaGlide device, especially the

Treatment surface (See section 11.1: “Cleaning BellaGlide”).

After cleaning, it is recommended you store your BellaGlide device in its original box, and keep it away from water

If you experience any complication (See section 8 – “Risks of using BellaGlide”)

please contact your physician immediately.

11. BellaGlide Maintenance

11.1. Cleaning BellaGlide

After each hair removal session, it is recommended that you clean your BellaGlide device, and especially the

treatment surface.

Unplug BellaGlide before cleaning.

Use a dry, clean cloth to gently wipe the BellaGlide outer shell, and especially the treatment surface.

Never immerse BellaGlide or any of its parts in water!

This device is to be orderly disposed of when reaching End of Life stage. In this way the device’s valuable

materials are recycled and the environmental burden avoided.

Deliver your old equipment to the nearest electronic waste collection point for safe and ecient disposal.

BellaGlide NA 1267B inside ED74-02 release.indd 15 10/30/2016 05:39:02 PM

La page est en cours de chargement...

Braun BellaGlide Le manuel du propriétaire

Ce manuel convient également à

Braun BellaGlide Le manuel du propriétaire

dans d''autres langues

Autres documents