Aeg-Electrolux 68031K-MN 68U Manuel utilisateur

68031 K-MN

User Manual

Notice d’utilisation

Gebruiksaanwijzing

Ceramic glass induction

hob

Table de cuisson

vetrocéramique à

induction

Glaskeramische

inductie-kookplaat

2

Contents

Operating Instructions 3

Safety instructions 3

Description of the Appliance 4

Cooking surface layout 4

Control panel layout 5

Operating the appliance 7

Switching the appliance on and off 7

Setting the heat setting 7

Locking/unlocking the control panel 7

Turning the STOP+GO function on and off 7

Using the automatic warm-up function 8

Using the child safety device 9

Switching the power function on and off 9

Using the timer 10

Automatic switch off 12

Tips on Cooking and Frying 13

Cookware for induction cooking zones 13

Tips on energy saving 14

Examples of cooking applications 14

Cleaning and Care 15

What to do if … 16

Disposal 19

Installation Instructions 19

Service 21

Assembly 64

Rating Plate 67

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruc-

tion manual carefully. It will enable you to navigate all processes perfectly and most ef-

ficiently.

To refer to this manual any time you need to, we recommend you to keep it in a safe

place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

The following symbols are used in this user information:

1

Warning! This must be read! Important advice for the safety of persons and information

on avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

3Operating Instructions

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do not, any damage resulting is not cove-

red by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose physical,

sensory or mental capabilities or lack of experience and knowledge prevents them

from using the appliance safely without supervision or instruction by a responsible

person to ensure that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or fusible ob-

jects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

• To avoid small children and pets unintentionally switching the appliance on, we re-

commend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered service en-

gineers.

• Built-in appliances may only be used after they have built in to suitable built-in units

and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic (cracks, scrat-

ches or splits), the appliance must be switched off and disconnected from the electri-

cal supply, to prevent the possibility of an electric shock.

• Repairs to the appliance must only be carried out by trained registered service engi-

neers.

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of the appliance or

hot cookware.

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep their upper body at least 30 cm from

induction cooking zones that are switched on.

Description of the Appliance4

• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and

saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-pressure clea-

ning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the cookware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch

the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic and

should be removed straightaway.

• Do not use the cooking zones with empty cookware or without cookware.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying

pans to boil dry.

• The ventilation gap of 5mm between the worktop and front of the unit underneath it

must not be covered.

Description of the Appliance

Cooking surface layout

Induction cooking zone 2300 W

with power function 3700 W

Induction cooking zone 18

00 W

with power function 2

800 W

Induction cooking zone 18

00 W

with power function 2

800 W

Control panel Induction cooking zone 1400 W

with power function 1800 W

5Description of the Appliance

Control panel layout

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by

touching sensor fields and confirmed by displays and acoustic signals.

Touch the sensor fields from above, without covering other sensor fields.

Sensor field Function

On / Off To switch the appliance on and off

Child lock Locking control panel for children

Stop+Go To switch the Keep Warm setting on/off

Power Switching the power function on and off

Timer Timer selection

Increase settings To increase Timer time

Reduce settings To reduce Timer time

On/Off

with indicator

Timer display

Cooking zone indicators

Timer function

Child lock with display

Timer

STOP+GO

with indicator

Heat setting selection

Heat setting indicator

Power function

Description of the Appliance6

Displays

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off, the cooking zones

need some time to cool down. Look at the residual heat indicator

.

3 Residual heat can be used for melting and keeping food warm.

Control bar

The control bar is a special Touch Control field.

The control bar is touched where the desired

heat setting is positioned. The heat setting is

shown in the display. Correct to the left or the

right, if necessary.

Do not release before the desired heat setting is

reached.

3 If the control bar is touched for longer than 6

seconds, a signal sounds and the appliance

switches itself off.

The induction cooking zones create the heat required for cooking directly in the base

of the cookware. The glass ceramic is merely heated by the residual heat of the cookwa-

re.

The cooling fan switches itself on and off depending upon the temperature of the elec-

tronics.

Display Description

Keep Warm setting STOP+GO function is set

- Heat settings To set heat settings

Power Power function is switched on

Fault Malfunction has occurred

Residual heat Cooking zone is still hot

Child safety device Lock/child safety device is engaged

Automatic switch off Switch off is active.

7Operating the appliance

Operating the appliance

3 Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

3 After switching on, within approx. 10 seconds a heat setting or a function must be set,

otherwise the appliance automatically switches itself off.

Setting the heat setting

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any

time in order to prevent the settings being changed e.g. by wiping over the panel with a

cloth.

3 When you switch the appliance off, the locking function is automatically switched off.

Turning the STOP+GO function on and off

The STOP+GO function simultaneously toggles all active cooking zones to keep-warm

mode then back to the heat setting they were at before.

Control panel Display Pilot light

Switch on Touch for 1 second / lights up

Switch off Touch for 1 second / none goes out

Control bar Display

To set the heat set-

ting

Touch the desired heat setting, if neces-

sary, correct to the left or the right

to /

To switch off Touch 0

Control panel Display

Switch on Touch (for 4 seconds)

Switch off Touch previously set heat setting

Control panel Display

To switch on Touch

To switch off Touch Previous heat setting (not automatic

warm-up or power function)

Operating the appliance8

3 STOP+GO does not stop timer functions.

3 STOP+GO controls the entire control panel apart from the sensor field .

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When setting a

heat setting using the automatic warm-up function, the cooking zone switches to full

power for a certain amount of time and then automatically switches back to the heat

setting set.

The length of time that the automatic warm up function operates depends on the heat

setting selected.

Step Control panel Display

1. Touch

2. Move your finger down from to select

the desired heat setting between

and

/ ,

after 5 seconds

.

As long as is displayed, the

appliance works at full power.

After the automatic warm up

is completed, the heat set-

ting / is displayed

again.

Heat setting Length of the automatic warm up

[min:sec]

v 0:12

1 0:12

2 0:12

3 1:21

4 3:07

5 4:24

6 5:51

7 8:12

8 10:12

9 10:36

10

2:01

11

2:01

12

2:28

13

2:52

14

---

9Operating the appliance

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety device

Switching off the child safety device

3 The child safety device can only be switched on and off, if no heat setting is set.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking session; it re-

mains activated afterwards.

3 After overriding the child safety device, a heat setting or a function must be set within

approx. 10 seconds, otherwise the appliance automatically switches itself off.

Switching the power function on and off

The power function makes more power available to the induction cooking zones, e.g.

to bring a large quantity of water to the boil quickly.

The power function is activated for 10 minutes at most. After that the induction cooking

zone automatically switches back to heat setting 14.

Step Control panel Display/Signal

1. Switch on appliance. (Do not set a

heat setting.)

2. Touch for 4 seconds

The child safety device is switched on.

Step Control panel Display/Signal

1. Switch on appliance. (Do not set a

heat setting.)

2. Touch for 4 seconds lights up

3. Switch appliance off.

The child safety device is switched off.

Step Control panel Display/Signal

1. Switch appliance on

2. Touch for 4 seconds lights up

Until the appliance is next switched off, it can used as normal. After switching off the

appliance, the child safety device is active again.

Control panel Display

To switch on Touch

To switch off Touch a heat setting /

Operating the appliance10

3 If the power function has ended, the cooking zones automatically switch back to the

heat setting set previously.

Power Management

The cooking zones of the cooking surface have

a maximum power.

The maximum power is reached when the heat

setting 14 has been set for all cooking zones.

Two cooking zones generate a pair (see figure)

and therefore, the power management shares

the maximum available power between these

cooking zones.

When the power function is selected for one

cooking zone, the power management makes

the additional power for this cooking zone

available by reducing the power of the other

cooking zone.

Example: the heat setting 14 is selected on one

cooking zone. The power function is switched

on for the corresponding cooking zone. The po-

wer function is carried out but the heat setting

14 of one of the cooking zones and the power

function for the other cooking zone of the pair

exceed the maximum power for both at the same time. For this purpose, the power ma-

nagement reduces the power of the cooking zone that switched on first from 14 to ex-

ample 5 and the display of this cooking zone changes between 14 and 5 and then stays

at the current possible maximum 5. (If the display changes between 14 and 5 or 14 and

3 or another value depends on the type of appliance and the size of the cooking zone.).

Using the timer

3 If just one countdown value is set you can change it only when the appliance is swit-

ched on.

3 If a heat setting is set on this cooking zone in addition to a countdown timer, the

cooking zone is switched off after the time set has elapsed.

Function Condition Outcome after the time

has elapsed

Automatic cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches

off

Countdown timer cooking zones not in use acoustic signal

00 flashes

11Operating the appliance

3 If a cooking zone is switched off, the timer function set is also switched off.

Selecting a cooking zone

3 If other timer functions are set, after a few seconds the shortest remaining time of all

the timer functions is displayed and the corresponding pilot light flashes.

Setting the time

Switching off the timer function

Step Control panel Display

1. Touch once Pilot light of the first cooking

zone flashes

2. Touch once Pilot light of the second

cooking zone flashes

3. Touch once Pilot light of the third cooking

zone flashes

4. Touch once Pilot light of the fourth

cooking zone flashes

Step Control panel Indicator

1. Select cooking zone Pilot light for the cooking zone selected flas-

hes

2. Touch or 00 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel Indicator

1. Select cooking zone Pilot light of cooking zone selected flashes

faster

Time remaining is displayed

2. Touch The time remaining counts backwards to 00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Operating the appliance12

Changing the time

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Automatic switch off

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for a cooking zone

within approx. 10 seconds, the cooking surface automatically switches itself off.

• If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx.

10 seconds, a signal sounds and the cooking surface switches off automatically.

• If all cooking zones are switched off, the cooking surface automatically switches itself

off after approx. 10 seconds.

Control panel

• When the appliance is switched off, if one or more of the sensor fields on the control

panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic si-

gnal switches itself off automatically when the sensor fields are no longer covered.

Induction cooking zones

• In the case of overheating (e.g. when a saucepan boils dry) the cooking zone auto-

matically switches itself off. is displayed. Before being used again, the cooking

zone must be set to

0 and cooled down.

• If cookware that is not suitable is used, lights up in the display and after 2 minutes

the indicator for the cooking zone switches itself off.

Step Control panel Indicator

1. Select cooking zone Pilot light of the selected cooking zone flashes

faster

Time remaining is displayed

2. Touch or 01 to 99 minutes

After a few seconds, the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected flashes

faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch Acoustic signal to acknowledge.

Acoustic signal stops.

13Tips on Cooking and Frying

• If one of the cooking zones is not switched off after a certain time, or if the heat set-

ting is not modified, the relevant cooking zone switches off automatically. is dis-

played. Before being used again, the cooking zone must be set to .

Tips on Cooking and Frying

3 Information on acrylamides

According to the latest scientific knowledge, intensive browning of food, especially in

products containing starch, can constitute a health risk due to acrylamides. Therefore we

recommend cooking at the lowest possible temperatures and not browning foods too

much.

Cookware for induction cooking zones

Cookware material

3 * Cookware for induction cooking zones is labelled as suitable by the manufacturer.

Suitability test

Cookware is suitable for induction cooking, if …

• ... a little water on an induction cooking zone set to heat setting 14 is heated very

quickly.

• ... a magnet sticks to the bottom of the cookware.

Cookware base

The bottom of the cookware should be as thick and flat as possible.

Heat setting Switches off after

1 - 3 6 hours

4 - 7 5 hours

8 - 9 4 hours

10 - P 1.5 hours

Cookware material suitable

Cast iron +

Steel, enamelled steel +

Stainless steel +*

Multi-layer pan bottom +*

Aluminium, copper, brass -

Glass, ceramic, porcelain -

Tips on Cooking and Frying14

Pan size

Up to a certain limit, induction cooking zones adapt themselves to the size of the bot-

tom of the cookware automatically. However, depending on the cooking zone size, the-

magnetic part of the bottom of the cookware must have a minimum diameter.

3 The cookware must be placed centrally on the cooking zone.

Tips on energy saving

2 Place cookware on the cooking zone before it is switched on.

2 If possible, always place a lid on the cookware.

Examples of cooking applications

The information given in the following table is for guidance only.

Diameter of cooking zone

[mm]

Minimum diameter of dish base [mm]

210 180

180 145

145 120

Heat

setting

Cooking-

process

suitable for

Cooking

time

Tips/Hints

0 Off position

1

Keeping

food warm

Keeping cooked foods warm as required Cover

1-3

Melting

Hollandaise sauce,

melting butter, chocolate,

gelatine

5-25 mins. Stir occasionally

Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on

3-5

Simme-

ring on

low heat

Simmering rice and milk-

based dishes

Heating up ready-cooked

meals

25-50 mins.

Add at least twice as

much liquid as rice, stir

milk dishes part way th-

rough cooking

5-7

Steaming

Braising

Steaming vegetables, fish

braising meat

20-45 mins.

With vegetables add only

a little liquid (a few table-

spoons)

7-9 Boiling

Steaming potatoes 20-60 mins.

Use only a little liquid, e.

g.: max.

¼ l water for

750 g potatoes

Cooking larger quantities of

food, stews and soups

60-150 mins.

Up to 3 l liquid plus in-

gredients

15Cleaning and Care

The power function is suitable for heating large quantities of liquid.

Cleaning and Care

1 Take care! Risk of burns from residual heat.

1 Warning! Sharp objects and abrasive cleaning materials will damage the appliance.

Clean with water and washing up liquid.

1 Warning! Residues from cleaning agents will damage the appliance. Remove residues

with water and washing up liquid.

Cleaning the appliance after each use

1. Wipe the appliance with a damp cloth and a little washing up liquid.

2. Rub the appliance dry using a clean cloth.

Removing deposits

1. Place a scraper on the glass ceramic surface at an angle.

2. Remove residues by sliding the blade over the surface.

3. Wipe the appliance with a damp cloth and a little washing up liquid.

4. Rub the appliance dry using a clean cloth.

9-12

Gentle

Frying

Frying escalopes, veal cor-

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts

Steady frying

Turn halfway through

cooking

12-13

Heavy

Frying

Hash browns, loin steaks,

steaks, Flädle (pancakes for

garnishing soup)

5-15 mins.

per pan

Turn halfway through

cooking

14

Boiling

Searing

Deep

frying

Boiling large quantities of water, cooking pasta, searing meat (goulash,

pot roast), deep frying chips

Heat

setting

Cooking-

process

suitable for

Cooking

time

Tips/Hints

What to do if …16

*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops

3 Remove stubborn residues with a cleaner for glass ceramic or stainless steel.

3 Scratches or dark stains on the glass ceramic that cannot be removed do not however

affect the functioning of the appliance.

What to do if …

Remove

Type of dirt

immedi-

ately

when the appliance has

cooled down

using

sugar, food containing sugar yes ---

a scraper*

plastics, tin foil yes ---

limescale and water rings --- yes

cleaner for glass cera-

mic or stainless steel*

fat splashes --- yes

shiny metallic discolouration --- yes

Problem Possible cause Remedy

The appliance cannot be swit-

ched on or is not operating

More than 10 seconds have

passed since the appliance was

switched on

Switch the appliance on again.

The lock is switched on Switch off the lock (See the

section “Locking/unlocking the

control panel”)

The child safety device is swit-

ched on

Deactivate child safety device

(See the section “Child safety

device”)

Several sensor fields were tou-

ched at the same time

Only touch one sensor field

Automatic switch off has been

triggered

Remove any objects (pan,

cloths, etc.) that are lying on

the control panel. Switch the

appliance on again

Dirty control panel The sensor fields must be dry

and fat-free.

There is water on the control

panel or the control panel is

covered with fat splashes

Wipe the control panel

STOP+GO is activated Switching off STOP+GO

17What to do if …

If you are unable to remedy the problem by following the above suggestions, ple-

ase contact your local Service Force Centre.

1 Warning! Repairs to the appliance are only to be carried out by qualified service engi-

neers. Considerable danger to the user may result from improper repairs.

3 If the appliance has been operated incorrectly, the engineer's visit will be chargeable,

even during the warranty period.

Acoustic signal sounds when

appliance is switched off

The control panel is wholly or

partly covered by objects.

Remove objects.

The residual heat indicator is

not displaying anything

The cooking zone was only on

for a short time and is there-

fore not hot

If the cooking zone is sup-

posed to be hot, call the Cus-

tomer Service Department.

Repeated acoustic signal (6x),

appliance switches off

One or more sensor fields have

been covered for longer than

10 seconds

Uncover sensor field

Acoustic signal sounds and

appliance switches itself on

and then off again; after 5 se-

conds another acoustic signal

sounds

The On/Off sensor field has

been covered up, e.g. by a

cloth

Do not place any objects on

the control panel

Display is switching between

two heat settings

Power management is redu-

cing the power of this cooking

zone

See the section “Switching the

power function on and off”

lights up Unsuitable cookware Use suitable cookware

No cookware on the cooking

zone

Place cookware on the cooking

zone

The diameter of the bottom of

the cookware is too small for

the cooking zone

Move onto a smaller cooking

zone

Use suitable cookware

lights up Overheating protection for the

cooking zone has been trigge-

red

Switch off the cooking zone.

Switch the cooking zone on

again

Automatic switch-off has

been triggered

Switch appliance off. Switch

appliance on again

and number are displayed Electronics fault Disconnect the appliance from

the electrical supply for a few

minutes (Take the fuse out of

the house’s wiring system)

If after switching on again,

is displayed again, call the cus-

tomer service department

Problem Possible cause Remedy

What to do if …18

Operating noises

Depending on the material and the processing of the base, the following noises may oc-

cur when using induction cooking zones.

• Cracking noise (1)

when using cookware made of different materials (Sandwich construction)

• Whistling (1)

when using an individual cooking zone or several cooking zones with high powers

when the cookware is made of different materials (Sandwich construction)

• Humming (2)

can occur at high power levels

• Clicking (2)

during electric switching processes

• Hissing, buzzing (3)

The device is fitted with a fan for cooling the electrics. A whiring noise can be heard

when operating the fan which may deviate depending on the performance and may

continue for a while after the appliance is switched off.

The noises described are normal and do not refer to any defects.

3

2

1

19Disposal

Disposal

2 Packaging material

The packaging materials are environmentally friendly and can be recycled. The plastic

components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pa-

ckaging materials in the appropriate container at the community waste disposal facili-

ties.

2 Old appliance

The symbol

W on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it shall be handed over to the applicable collec-

tion point for the recycling of electrical and electronic equipment. By ensuring this pro-

duct is disposed of correctly, you will help prevent potential negative consequences for

the environment and human health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed information about recycling of this

product, please contact your local city office, your household waste disposal service or

the shop where you purchased the product.

Installation Instructions

1 Safety instructions

Warning! This must be read!

The laws, ordinances, directives and standards in force in the country of use are to be

followed (safety regulations, proper recycling in accordance with the regulations, etc.)

Installation may only be carried out by a qualified electrician.

The minimum distances to other appliances and units are to be observed.

Anti-shock protection must be provided by the installation, for example drawers may

only be installed with a protective floor directly underneath the appliance.

The cut surfaces of the worktop are to be protected against moisture using a suitable

sealant.

The sealant seals the appliance to the work top with no gap.

Do not use silicon sealant between the appliance and the work top.

When building in, protect the underside of the appliance from steam and moisture, e.g.

from a dishwasher or oven.

Avoid installing the appliance next to doors and under windows. Otherwise hot cookwa-

re may be knocked off the rings when doors and windows are opened.

Installation Instructions20

z Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by installing correctly.

• The appliance must be connected to the electrical supply by a qualified electrician.

z Risk of injury from electrical current.

• Loose and inappropriate plug and socket connections can make the terminal overheat.

• Have the clamping connections correctly installed by a qualified electrician.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connection, the appropriate mains cable of

type H05BB-F Tmax 90°C(or higher) or an equivalent type must be used.

• If this appliance’s mains cable is damaged, it must be replaced by a special cable (type

H05BB-F Tmax 90°C; or higher) or an equivalent type. The latter is available from the

Customer Care Department.

A device must be provided in the electrical installation which allows the appliance to be

disconnected from the mains at all poles with a contact opening width of at least 3 mm.

Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to

be removed from the holder), earth leakage trips and contactors.

La page charge ...

Aeg-Electrolux 68031K-MN 68U Manuel utilisateur

Ce manuel convient également à

Aeg-Electrolux 68031K-MN 68U Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents