Samsung UN75ES9000 Le manuel du propriétaire

BN68-04533B-01

Contact SAMSUNG WORLD WIDE

If you have any questions or comments about your Samsung TV, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs

Samsung.

Country

Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca (English)

www.samsung.com/ca_fr (French)

Samsung Electronics Canada Inc.,

Customer Service 55 Standish Court

Mississauga, Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 85

Challenger Road Ridgeﬁ eld Park, NJ 07660

LED TV

user manual

SUPPORT

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________Serial No. _____________

✎ If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

[UE9000-ZC]BN68-04533B-00L02.indb 1 2012-07-25 �� 10:51:06

English - 2

A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual see page 47.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Product design and

speciﬁcations may be changed without notice.

Important Warranty Information Regarding

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format full-

motion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to ﬁll the screen, if your model offers

this feature, with the images constantly in motion. Displaying stationary graphics and images on the screen, such as the dark sidebars on non-expanded

standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics

and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven

aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and

primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to

view different formats as a full screen picture.

Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of format selection and use, as

well as burned in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)

products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service

in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the

warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited

Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service

Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those

encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or

replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles), still image elements (such as TV channel logos, stock or news bars at the screen bottom etc.),

or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will

affect image quality. To reduce risk of this effect, please follow the recommendations below:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible match.

• Reduce brightness and contrast to avoid the appearance of after-images.

• Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.

[UE9000-ZC]BN68-04533B-00L02.indb 2 2012-07-25 �� 10:51:06

English - 3

Contents

• List of Features ...............................................4

• Accessories and Cables .................................. 5

• Installing the Wall Mount (Optional) .................. 7

• Providing Proper Ventilation for Your TV .......... 9

• Using the TV's Controller (Panel Key) ............10

• Connecting the Power Cord

and the Antenna or Cable Connection .......... 11

• The Standard Remote Control ...................... 12

• How to Navigate Menus ................................ 14

• Conﬁguring the Basic Settings in Initial Setup 15

• Connecting to AV Devices

(Blu-ray Players, DVD Players, etc.) ............... 19

• Connecting to Audio Devices ........................ 21

• Connecting to a PC ...................................... 22

• The EX-Link Cable Connection .................... 22

• Changing the Input Source ...........................23

• Using Smart Hub .......................................... 24

• SMART Interaction ........................................ 25

− Voice Control ........................................... 26

− Motion Control ........................................28

− Face recognition ......................................31

• The Evolution Kit Slot (Kit Sold Separately) .... 33

• Connecting to a Network .............................. 34

• Conﬁguring Network Connections ................. 36

• The Smart Touch Control ..............................38

• The IR Blaster ............................................... 42

• Setting up the Universal Remote Control .......44

• Using the Search

for Recommended Model Code .................... 46

• How to view the e-Manual ............................ 47

• Troubleshooting ............................................ 49

• Licenses ....................................................... 52

• Storage and Maintenance ............................. 52

• Speciﬁcations - Smart Touch Control ............55

• Speciﬁcations - IR Blaster ............................. 55

• Speciﬁcations ............................................... 56

• Display Resolution ........................................ 57

• Video Codec ................................................. 58

• Dimensions ................................................... 59

• Index ............................................................ 60

[UE9000-ZC]BN68-04533B-00L02.indb 3 2012-07-25 �� 10:51:07

English - 4

List of Features

• 3D: This exciting new feature enables you to view 3D content.

• SMART HUB: Your gateway to all your content, integrated in one place.

− Provides diverse entertainment choices.

− Lets you control your entertainment life with an easy-to-use, user friendly user interface.

− Gives you easy access to diverse apps, with more being added every day.

− Lets you customize your TV by grouping and sorting apps to your taste.

• AllShare Play: Lets you access, view, or play photos, videos, or music located on USB devices,

digital cameras, cell phones, and PCs. PCs and cell phones can be accessed wirelessly, through your

wireless network.

• Anynet+ (HDMI-CEC): Allows you to control all connected Samsung devices that support Anynet+

with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual that's built into your TV. (page 47)

• SMART Interaction: Using this function, you can access and control menu options and functions

using speech or motions. (page 25)

[UE9000-ZC]BN68-04533B-00L02.indb 4 2012-07-25 �� 10:51:07

English - 5

Accessories and Cables

✎

Please make sure the following items are included with your TV. If any items are missing, contact your

dealer.

✎

The items’ colors and shapes may vary depending on the model.

✎

Make sure that there are no accessories hidden behind or under packing materials after you open the

box.

• Smart Touch Control (AA59-00626A) & Batteries (AA x 2)

• IR Blaster (BN96-22897A) & Batteries (AA x 4)

• Remote Control (AA59-00637A) & Batteries (AAA x 2)

• User Manual

• Cleaning Cloth (BN63-01798B)

• Warranty Card / Safety Guide

• 3D Active Glasses

• Power Cord

AV Adapter Cover Bottom Screws (M3 x L6) x 5

(BN39-01154H) (BN63-08704B)

Input Cables (Sold Separately)

You will need one or more of these cables to connect your TV to your antenna or cable outlet and your

peripheral devices (Blu-ray players, DVD players, etc.)

To purchase the RS232 cable, contact www.SamsungParts.com.

RS232 (AA39-00311A) HDMI HDMI-DVI Audio

Component Composite (AV) Coaxial (RF)

[UE9000-ZC]BN68-04533B-00L02.indb 5 2012-07-25 �� 10:51:08

English - 6

✎

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks

are below.

Cable Plugs Ports / Jacks

HDMI

USB

Optical

Warning

Do not plug cables in upside down.

Be sure to check the orientation of the plug before plugging it in.

Wireless Keyboard (Sold Separately)

Wireless Keyboard

[UE9000-ZC]BN68-04533B-00L02.indb 6 2012-07-25 �� 10:51:09

English - 7

Installing the Wall Mount (Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the

manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious

injury to a child or adult, and serious damage to the product.

Attach the wall-mount cover (Cover Bottom)

1

4

2

5

3

6

or

1. Loosen three screws on the back of the TV.

2. Remove the stand cover.

3. Loosen 5 or 6 screws on the stand.

4. Make sure that at least two people are holding each side of the TV before removing the stand as

shown.

5. Have the provided wall-mount bracket ready.

6. If you want to mount the TV onto the wall, attach the wall-mount cover to the stand as shown.

[UE9000-ZC]BN68-04533B-00L02.indb 7 2012-07-25 �� 10:51:10

English - 8

Installing the Wall Mount Kit

Lets you mount the TV on the wall. You must use the dedicated wall mount kit (WMN4277S - sold

separately) for the installation.

For detailed information about installing the wall mount, see the instructions provided with the wall mount.

We recommend you contact a technician for assistance when installing the wall mount bracket. We do not

advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury

to yourself or others if you elect to install the wall mount on your own.

To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).

VESA Wall Mount Kit Notes and Speciﬁcations

✎

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to

surfaces other than plaster board, please contact your nearest dealer for additional information. If you

install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE

• Standard dimensions for wall mount kits are shown in the table below.

• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly

are provided.

• Do not use screws that do not comply with the VESA standard screw speciﬁcations.

• Do not use screws that are longer than the standard length or do not comply with the VESA

standard screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV

set.

• For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the

screws may differ depending on the wall mount speciﬁcations.

• Do not fasten the screws too ﬁrmly. This may damage the product or cause the product to fall,

leading to personal injury. Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed

wall mount is used or the consumer fails to follow the product installation instructions.

• Do not mount the TV at more than a 15 degree tilt.

• Always have two people mount the TV on a wall.

Product Family

TV size in

inches

VESA screw hole specs

(A * B) in millimeters

Standard

Screw

Quantity

LED-TV

26 100 X 100 M4

432 – 40 200 X 200 M6

46 – 75 400 X 400 M8

✎

Remove the screws in the mounting holes before you install the wall mount.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal

injury due to electric shock.

[UE9000-ZC]BN68-04533B-00L02.indb 8 2012-07-25 �� 10:51:10

English - 9

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls,

cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or a

problem with the product caused by an increase in its internal temperature.

✎

Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts

provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may cause difﬁculties with the product or result

in injury caused by the product falling.

Installation with a stand. Installation with a wall-mount.

4 inches

Other Warnings

✎

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be somewhat hot.

[UE9000-ZC]BN68-04533B-00L02.indb 9 2012-07-25 �� 10:51:10

English - 10

Using the TV's Controller (Panel Key)

The TV's Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV

without the remote control.

✎

The product color and shape may vary depending on the model.

✎

If both the camera and the microphone are pushed in, the applications related to the voice and motion

recognition functions will be disabled. To enable the functions, first press down on the camera so that

it pops up. You can adjust the angle from the back of the camera.

mR

P

Function menu

Remote control sensor

TV Controller

The image is drawn by facing

the front side of the TV.

When you use the Smart Touch Control, a standby

LED does not work (except P button).

Camera

✎

Follow these instructions facing the front of your TV.

✎

When selecting the function by moving the controller to the up/down/left/right directions, be sure

not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right

directions.

✎

When you use a TV camera, you should check whether a tape attached or not in rear of the TV

camera, and then you can use a TV camera after adjust a camera angle. When you don't want to

use a TV camera, we recommend to use after a camera lens fixes to upwards. In this case, Face

recognition and Motion Control are not available.

Power on Turn the TV on by pressing the Controller when the TV is in standby

mode.

Adjusting the volume Adjust the volume by moving the Controller from side to side when

the power is on.

Selecting a channel Select a channel by moving the Controller upwards and downwards

when the power is on.

Using the Function menu To view and use the Function menu, press and release the Controller

when the power is on. To close the Function menu, press and release

the Controller again.

Selecting the SMART HUB (™) With the Function menu visible, select SMART HUB (™) by moving

the Controller upwards. The SMART HUB main screen appears.

Select an application by moving the Controller, and then pressing the

Controller.

[UE9000-ZC]BN68-04533B-00L02.indb 10 2012-07-25 �� 10:51:11

English - 11

Selecting the MENU (m) With the Function menu visible, select the MENU (m) by moving the

Controller to the left. The OSD (On Screen Display) Menu appears.

Select an option by moving the Controller to the right. Move the

Controller to the right or left, or upwards and downwards to make

additional selections. To change a parameter, select it, and then press

the Controller.

Selecting a Source (s) With the Function menu visible, open the Source (s) list by moving

the Controller to the right. The Source list screen appears. To select

a source, move the Controller upwards and downwards. When the

source you want is highlighted, press the Controller.

Power Off (P) With the Function menu visible, select Power Off (P) by moving the

Controller downwards, and then press the Controller.

✎

To close the Menu, Smart Hub, or Source, press the Controller for more than 1 second.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric

power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long

periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

Assembling the Stand Wire Holder

Connecting the Power Cord and the Antenna or Cable Connection

ANT OUT

VHF/UHF Antenna

Power Input

or

Antenna Cable (Not Supplied)

Cable

✎

Plug the power cord into a wall outlet only after you have made all other connections.

✎

If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite

connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.

✎

Use caution when you move or swivel the TV if the antenna cable is tightly connected. You could

break the antenna jack off the TV.

[UE9000-ZC]BN68-04533B-00L02.indb 11 2012-07-25 �� 10:51:11

English - 12

The Standard Remote Control

Learn where the function buttons are on your remote. Especially note SOURCE, MUTE, VOL, CH, MENU,

TOOLS, E, INFO, CH LIST, RETURN, and EXIT.

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used

by visually impaired persons.

SOURCE

MUTE

MENU

HISTORY

INFOTOOLS

RETURN

Family Story

SEARCH CAMERA

SUPPORTP.SIZE

EXIT

PRE-CH

CH

LIST

M

BCD

l

Turns the TV on and off.

Displays and selects the available video

sources. (page 23)

Press to select additional digital

channels being broadcast by the same

digital station. For example, to select

channel ‘54-3’, press ‘54’, then press

‘-’ and ‘3’.

Adjusts the volume.

Opens the OSD (Menu).

Displays channel lists on the screen.

Quickly select frequently used functions.

Use this button in a speciﬁc feature. For

details, refer to the e-Manual.

Returns to the previous menu.

Use these buttons according to the

directions on the TV's screen.

Use these buttons in a speciﬁc feature.

For details, refer to the e-Manual.

Moves the cursor, selects the on-screen

menu items, and changes the values

seen on the TV's menu.

Turns the remote control light on or

off. When on, the buttons become

illuminated for a moment when pressed.

(Using the remote control with this

button set to On will reduce the battery

usage time.)

Returns to the previous channel.

Changes channels.

Displays a list of recently used functions.

You can select a function again easily

and quickly.

Displays information on the TV screen.

Exits the menu.

Family Story: Connect to the Family

Story application. See e-Manual chapter

Advanced Features → Family Story.

SEARCH: Starts search function. See

e-Manual chapter Advanced Features

→ Search.

CAMERA: Connect to camera

application.

SUPPORT: Lets you use various

support functions including the

e-Manual. (page 47)

P.SIZE: Lets you select the Picture

Size. See e-Manual chapter Basic

Feature → Changing the Picture Size.

X

: Turns the 3D image on or off. See

e-Manual chapter Advanced Features →

Using the 3D function.

Cuts off the sound temporarily.

Brings up the Smart Hub applications.

See e-Manual chapter Advanced

Features → Smart Hub.

Gives direct access to channels.

[UE9000-ZC]BN68-04533B-00L02.indb 12 2012-07-25 �� 10:51:12

English - 13

Installing batteries (Battery size: AAA)

Match the polarity of the batteries to the symbols in the battery compartment.







✎

Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, see

page 38.

✎

NOTE

• Install the batteries so that the polarity of the batteries (+/-) matches the illustration in the battery

compartment.

• Use the remote control within 23 feet of the TV.

• Bright light may affect the performance of the remote control. Avoid using it near ﬂuorescent lights

or neon signs.

• The color and shape of the remote may vary depending on the model.

[UE9000-ZC]BN68-04533B-00L02.indb 13 2012-07-25 �� 10:51:12

English - 14

How to Navigate Menus

Your TV’s Main and Tools menus contains functions that let you control the TV’s features. For example, in

the Main menu you can change the size and conﬁguration of the picture, its brightness, its contrast and so

on. There are also functions that let you control the TV’s sound, channel conﬁguration, energy use, and a

host of other features. To access the main, on-screen menu, press the MENUm button on your remote.

To access Tools menus, press the TOOLST button. Tools menus are available when the TOOLST menu

Icon is displayed on the bottom right of the screen.

The illustration below displays the buttons on the standard remote you use to navigate the menus and

select and adjust different functions. For information about using the Smart Touch Control, see page 38.

INF

O

TOOLS

RETURN

H

I

S

T

O

RY

MENU

EXIT

1

2

3

5

4

1 MENUm button: Displays the main on-screen menu.

2 TOOLST button: Displays the Tools menus when available.

3 E and Direction buttons: Use the Direction buttons to move the cursor and highight an item. Use the

Enter button to select an item or conﬁrm the setting.

4 RETURNR button: Returns to the previous menu.

5 EXITe button: Exits the on-screen menu.

How to Operate the Main Menu (OSD - On Screen Display) Using the Standard Remote

The access steps may differ depending on the menu option you select.

1

MENUm

The main menu options appear on the screen:

Picture, Sound, Channel, Network, System, Support.

2

u / d Select a main menu option on the left side of the screen with the u or d

button.

3

E Press E to access the sub-menus.

4

u / d Select the desired submenu with the u or d button.

5

u / d / l / r Adjust the value of an item with the l, r, u, or d button. The

adjustment in the OSD may differ depending on the selected menu.

6

E Press E to conﬁrm the selection.

7

EXITe Press EXITe.

[UE9000-ZC]BN68-04533B-00L02.indb 14 2012-07-25 �� 10:51:13

English - 15

Conﬁguring the Basic Settings in Initial Setup

When you turn the TV on for the ﬁrst time, a sequence of screens and on-screen prompts will assist you in

conﬁguring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the P button to

turn on the TV.

✎

Use the standard remote to run the Initial Setup.

✎

Setup is available only when the input source is set to TV. See "Changing the Input Source" (page 23).

✎

To return to the previous step in the Setup sequence, select Previous.

✎

If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna

or cable connection before you turn on the TV. See page 11 for instructions.

✎

If you want to configure a wired network connection during Setup, make sure you've connected a

LAN cable to your TV. See pages 35 for instructions. If you want to configure a wireless network

connection during Setup, make sure your wireless modem or router is on and working.

1

Menu Language:

Select a Language.

After you press the P button, the Start screen appears. Select Next

to continue. The Menu Language screen appears. Select the menu

language you want using your remote, and then select Next. The TV will

display on-screen menus using the language you select beginning with

the next step in the Setup process.

2

Use Mode: Select

the Home Use

Mode.

On the Use Mode screen, select the Home Use using your remote, and

then select Next. The Network Settings screen appears.

✎

Store Demo is for retail environments only. If you select Store

Demo, some functions will not work, and the TV will reset all

functions to their factory default after a certain period of time. For

more information about Store Demo, go to the end of this section.

3

Network Settings:

Conﬁgure the

network settings.

✎

To configure

later, select Skip.

You can set up

the network

connection later

using the on-

screen Network

menu.

To conﬁgure your network settings, select Next using your remote, and

then go to 3A - Wireless Network or 3B - Wired Network on the next

page.

If you do not know your network conﬁguration information or want to

conﬁgure the settings later, or do not have a network, select Skip, and

then go to 5 - Auto Program (1) on page 17.

To conﬁgure network settings later, refer to “Setting up the Wired or

Wireless Network” in the e-Manual or see the Network Connection

sections in this manual (pages 34 and 36).

[UE9000-ZC]BN68-04533B-00L02.indb 15 2012-07-25 �� 10:51:13

English - 16

3

a

Wireless Network 1. The TV searches for and then displays all the wireless networks

within range. When done, it displays a list of the networks. In the list

of networks, move the Highlight to select a network, and then select

Next. If the selected network requires a Security Key, the Security

Key screen appears.

✎

If you have a WPS(PBC) compatible router, select WPS(PBC)

instead, and then follow the directions on the screen. When

done, go to Step 4.

2. Enter your network security key or WPS PIN using your remote.

✎

Enter numbers and letters using your remote.

• If you are using the standard remote, you can enter numbers

by pressing the number buttons on the remote.

• To enter a letter, move the Highlight to the letter, and then

select it. You can enter numbers in the same fashion if you

choose.

✎

To display capital letters (or redisplay small letters if capital letters

are displayed), select Caps or Shift.

✎

To display symbols and punctuation, select 1F. To redisplay

letters, select 1F again.

3. When done, select Next if you have entered a security key or WPS

PIN if you have entered a WPS PIN.

4. The TV checks the wireless connection. If the connection is

successful, the You are connected to the Internet. If you have any

problems using online services, please contact your Internet

Service Provider. message appears. Select Next, and then go to 4

Software Upgrade Step.

✎

If the connection fails, select Previous, repeat Step 1 and 2,

carefully re-enter your security key or WPS PIN, then repeat

Steps 3 and 4. If it fails again, select Next on the “Connection

Failed” screen, and then go to 5 - Auto Program (1) on the next

page. Configure your network later through Network Settings

in the TV’s Menu. For more information, refer to “Setting up the

Wired or Wireless Network” in the e-Manual or see the Network

Connection sections in this manual (pages 34 and 36).

3

b

Wired Network The TV checks the network connection, then displays the You are

connected to the Internet. If you have any problems using online

services, please contact your Internet Service Provider. message

appears. Select Next. The Software Upgrade screen appears.

[UE9000-ZC]BN68-04533B-00L02.indb 16 2012-07-25 �� 10:51:13

English - 17

4

Software Upgrade:

Update the software

to the latest version.

✎

To update later,

select Skip.

When Network Settings is complete, your TV will check for a new

software version automatically. If new software is available, the TV

downloads and installs the new software. When the download is

complete, select Next.

✎

If you want to upgrade later, select Skip. For more information, refer

to Software Update (Preference Features → Support Menu) in the

e-Manual.

✎

This may take some time, depending on your network status.

✎

You can only upgrade software if your TV has an active network

connection.

✎

If no new update software is available, a no new updates message

appears on the screen. Select OK.

5

Auto Program (1):

Select where your

TV signal comes

from.

Select the appropriate option for your TV using your remote, and then

select Next.

• Yes, I need to.: Select if you have an antenna or a cable connection

without a set-top box. If you select this option, go to 6 - Auto

Program (2) Step.

• No, I don’t need to.: Select if you have a satellite or cable set-top

box. You do not need to run Auto Program. If you select this option,

go to 8 - Clock on the next page.

6

Auto Program (2):

Select the search

options.

1. Select Air or Cable using your remote. A check appears on your

selection. When done, select Next. You can check both if you have

both connected.

2. If you selected Air, go to 7 - Auto Program (3).

3. If you selected Cable, you’ll go to the cable system screen. Select

Digital Cable System. The option window appears. Select the

correct cable signal format; STD, HRC, or IRC. Most cable systems

use STD (Standard). Repeat the same process with Analog Cable

System.

4. When done, select Next.

7

Auto Program (3):

Channel

memorization

Channel memorization stars. Channel memorization can take up to 45

minutes, depending on your cable system.

For more information, refer to Auto Program (Channel Menu →

Memorizing Channels) in the e-Manual.

✎

Select Stop at any time to halt the memorization process.

[UE9000-ZC]BN68-04533B-00L02.indb 17 2012-07-25 �� 10:51:14

English - 18

8

Clock: Set the

Clock.

Select Auto or Manual, and then select Next.

✎

If you selected No, I don’t need to. in 5 - Auto Program (1), you can

only set the current time and date manually, using your remote.

Auto

If you selected Auto, the TV will automatically download the correct time

from a digital channel. The Time Zone screen will appear. Select your

Time Zone, and then select Next. The DST (Daylight Savings Time)

screen will appear. The DST function sets the time ahead one hour to

adjust the clock for Daylight Savings Time. Select On if you want to turn

the DST adjustment on. Select Off to turn off the DST adjustment. You

can also turn the DST function on through the TV's on screen menu

(Menu → System → Time → Clock → DST).

Manual

If you selected Manual, you’ll go to the Clock screen. Select Date or

Time. You can set the current date and time using your remote. When

done setting the Date and Time, select Next.

9

Voice and Motion

Control: Setting the

Voice and Motion

Control function.

You can turn the Voice and Motion Control function on or off. Select Off

or On, and then select Next.

10

Setup: Complete Review the Setup data, and then select Close to ﬁnish.

✎

The completed settings are displayed.

11

Set the Universal

Remote.

1. Turn on the POWER button on the bottom of the IR Blaster, and then

press the PAIRING button.

2. Select Yes to start the Universal Remote Setup.

✎

For more detailed information about the Universal Remote Setup,

refer to "Setting up the Universal Remote Control" section in the

manual (page 44).

If You Want to Rerun Setup...

Menu → System → Setup

If You Want to Turn the Store Demo Mode On or Off.

To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is

on. The Function menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more

than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using

the Controller, push the Controller to the right (to Source (s)) and hold for more than 5 seconds. See

page 10 for information about the Controller.

[UE9000-ZC]BN68-04533B-00L02.indb 18 2012-07-25 �� 10:51:14

English - 19

Connecting to AV Devices (Blu-ray Players, DVD Players, etc.)

Using an HDMI Cable for an HD connection (up to 1080p, HD digital signals)

For the best quality HD picture, we recommend using an HDMI connection.

Use with DVD players, Blu-ray players, HD cable boxes, and HD Set-Top-Box satellite receivers.

HDMI OUT

HDMI Cable (Not Supplied)

Device

✎

HDMI IN 1 (DVI), HDMI IN 2 (ARC), HDMI IN 3 (MHL)

• For the best picture and audio quality, connect digital devices to the TV using HDMI cables.

• An HDMI cable supports digital video and audio signals, and does not require an audio cable.

− To connect the TV to a digital device that does not support HDMI output, use an HDMI to DVI

cable and audio cables.

• If you connect an external device to the TV that uses an older version of HDMI, the video and audio

may not work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is

out of date, request an upgrade.

• Be sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display or a connection

error may occur.

• We recommend using a basic high-speed HDMI cable or an HDMI cable that is Ethernet

compatible. Note that this product does not support the Ethernet function via HDMI.

• This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note

that the ARC function is supported by the HDMI IN 2 (ARC) port only.

− If 3D Auto View is set to On, some functions such as SMART HUB may be disabled. In this

case, set 3D Auto View or 3D Mode to Off.

• The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port on the TV. It can be

enabled only when the TV is connected with an audio receiver that supports the ARC function.

• This product supports the Mobile High-Deﬁnition Link (MHL) function via an HDMI-MHL cable. Note

that the MHL function is supported by the HDMI IN 3 (MHL) port only.

• The MHL function lets you display a mobile device's screen via the HDMI IN 3 (MHL) port on the

TV. It can be enabled only when the TV is connected with a mobile device that supports the MHL

function. For more detailed information, see "Using the MHL function" in e-Manual.

[UE9000-ZC]BN68-04533B-00L02.indb 19 2012-07-25 �� 10:51:15

English - 20

• When you use MHL devices via a MHL cable, Picture Size is set to Screen Fit automatically. But

if you use MHL devices via an HDMI cable, Picture Size is not set to Screen Fit automatically.

To view an original size, select Screen Fit in the Picture Size menu (Menu → Picture → Picture

Size).

• If you use MHL devices via an HDMI cable, The TV will be recognized as the HDMI input. In this

case, the TV may work differently than when you use MHL devices via a MHL cable.

✎

For the best cable connection to this product, use cables no thicker than the cable illustrated below:

• Maximum thickness - 0.55 inches (14mm)

Using a Component Cable (up to 1080p HD signals) or an Audio/Video Cable (480i analog signals

only)

Use with DVD players, Blu-ray players, cable boxes, STB satellite receivers, VCRs.

Red White

Red

Blue

White

Green

Yellow

Component Cable

(Not Supplied)

Video Cable

(Not Supplied)

Video Cable (Not Supplied)

AV Adapter (Supplied)

Audio Cable (Not Supplied) Audio Cable (Not Supplied)

Audio Cable

(Not Supplied)

Device Device Device

✎

For better picture quality, we recommend the Component connection over the A/V connection.

✎

When you connect a Video cable to AV IN 1, the color of the AV IN 1 [VIDEO] jack (green) will not

match the video cable (yellow).

[UE9000-ZC]BN68-04533B-00L02.indb 20 2012-07-25 �� 10:51:15

La page charge ...

Samsung UN75ES9000 Le manuel du propriétaire

Ce manuel convient également à

Samsung UN75ES9000 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents