Sony CDX-M8800 Le manuel du propriétaire

Operating Instructions

Mode d’emploi

Manual de instrucciones

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No.

Serial No.

CDX-M8805X

CDX-M8800

For installation and connections, see the supplied installation/connections manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/raccordement fourni.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

3-261-850-11 (1)

US

FR

ES

FM

/

AM

Compact Disc Player

2

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy its various features

even more with:

• MP3 file playback.

• CD-R/CD-RW which can have a session added

can be played (page 7).

• Discs recorded in Multi Session can be played,

depending on the recording method (page 8).

• Optional CD/MD units (both changers and

players)*

1

.

•ID3 tag*

2

version 1.0, 1.1, 2.2, 2.3 or 2.4

information (displayed when an MP3 file is

played).

• CD TEXT information (displayed when a CD

TEXT disc*

3

is played).

• Supplied controller accessory

Card remote commander RM-X143A

• Optional controller accessories

Wireless rotary commander RM-X6S

Wired rotary commander RM-X4S

*1 This unit works with Sony products only.

*2 ID3 tag is an MP3 file that contains information

about album name, artist name, track name, etc.

*3 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

Warning

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment

and receiver.

–

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

–

Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

The use of optical instruments with this produc

t

will increase e

y

e hazard.

CAUTION

The “XM Ready” logo indicates that this product

will control a Sony XM tuner module (sold

separately).

Please see your nearest authorized Sony dealer

for details on the XM tuner module.

For instructions on XM tuner operation, please

refer to the XM tuner module’s included

instruction manual.

R

The BBE MP process improves digitally

compressed sound, such as MP3, by restoring

and enchancing the higher harmonics lost through

compression. BBE MP works by generating

even-order harmonics from the source material,

effectivel

y

recoverin

g

warmth, detail and nuance.

3

Table of Contents

Location of controls. . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 7

About MP3 files . . . . . . . . . . . . . . . . . . . . . . 8

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 9

Setting the clock . . . . . . . . . . . . . . . . . . . . . 10

CD Player

CD/MD Unit (optional)

Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . 10

Display items. . . . . . . . . . . . . . . . . . . . . . . . 12

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 13

Playing tracks in random order

— Shuffle Play . . . . . . . . . . . . . . . . . . . . 13

Labeling a CD

— Disc Memo*. . . . . . . . . . . . . . . . . . . . 14

Locating a disc by name

— List-up* . . . . . . . . . . . . . . . . . . . . . . . 15

* Functions available with optional CD/MD unit

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 15

Receiving the stored stations. . . . . . . . . . . . 16

Storing only the desired stations . . . . . . . . . 16

Storing station names

— Station Memo. . . . . . . . . . . . . . . . . . . 17

Tuning in a station through a list

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 18

Other Functions

Using the rotary commander. . . . . . . . . . . . 18

Adjusting the sound characteristics . . . . . . 20

Changing the BBE MP setting . . . . . . . . . . 20

Quickly attenuating the sound . . . . . . . . . . 20

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 21

Setting the equalizer (EQ7). . . . . . . . . . . . . 22

Setting the Dynamic Soundstage Organizer

(DSO). . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Selecting the display mode and display

image . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Connecting auxiliary audio equipment. . . . 24

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 25

Removing the unit. . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . 27

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 28

Error displays/Messages. . . . . . . . . . . . . . . 29

4

Location of controls

Refer to the pages listed for details.

a SCRL (scroll) button 12

b DSPL (display mode change) button

12, 14

c Number buttons

Radio:

To store stations/receive stored stations.

CD/MD:

(1): REP 13

(2): SHUF 13

(6): PAUSE*

1

11

Sound:

(5): BBE MP*

1

20

d EQ7 button 22

e MENU button

To display the menus.

f SOURCE (Power on/Radio/CD/MD*

2

/

AUX*

3

) button

To select the source.

g SEEK/AMS (</,) buttons

To skip tracks/fast-forward, reverse a track/

tune in stations automatically, find a station

manually/select a setting.

h SOUND button 18, 20

i OFF (Stop/Power off) button

11, 18,

24

j VOL (+/–) buttons

To turn up or down the volume.

k OPEN/CLOSE button 10, 11

l MODE button

To change the operation.

m DSO button 23

n LIST (CAT)*

4

button 15, 18

o DISC (ALBUM) (M/m) buttons

To receive preset stations/change the disc*

5

,

skip albums*

6

/select a menu.

p ENTER button

To enter a setting.

q ATT button 20

*1 Available only when playing back on this unit.

*2 When an optional MD unit is connected.

*3 Available only when an optional Sony portable

device is connected to AUX IN terminal of the unit.

When you connect a Sony portable device and CD/

MD unit(s) at the same time, use the AUX IN

selector.

*4 The CAT button is available only when the XM

tuner is connected.

*5 When an optional CD/MD unit is connected.

*6 Available only when an MP3 file is played.

Card remote commander RM-X143A

DISC

–

ATTOFF

SCRL

REP SHUF

DSPL

1

4

MODE

BBE MP PAUSE

2

5

3

6

SOURCE

DISC

+

SEEK

+

SEEK

–

SO

U

ND

ENTER

MENU

LIST

CA

T

EQ7 DSO

VOL

+

–

OPEN/CLOSE

DISC

–

SOURCE

DISC

+

SEEK

+

SEEK

–

In menu mode, the currently selectable button(s) of

these four are indicated with a “ v” in the display.

Note

If the display disappears by pressing (OFF), it cannot

be operated with the card remote commander unless

(SOURCE) on the unit is pressed, or a disc is inserted

to activate the unit first.

Tip

For details on how to replace the battery, see

“Replacing the lithium battery” on page 25.

(SEEK) (<):

to select

leftwards

(DISC) (M):

to select upwards

(DISC) (m):

to select downwards

(SEEK) (,):

to select

rightwards

5

.

The buttons on the unit share the same

functions as those on the card remote

commander.

a OPEN button 10, 11

b Main display window

c IMAGE button 23

d qf Receptor for the card remote

commander

e qa RESET button 9

f OFF (Stop/Power off) button*

7

g VOL (–/+) button

h ENTER button

i DISC (ALBUM) (+/–) button

j SOURCE button

l SCRL (scroll) button

m DSPL (display mode change) button

o ATT button

p

CLOSE (front panel close) button

10

q MODE button

r SOUND button

s DSO button

t SEEK/AMS (.m/M>) button

u EQ7 button

v MENU button

w LIST (CAT)*

8

button

x Z (eject) button 11

y Sub display window

Main display side

Operation side

13

45

2

CDX-M8805X/M8800

CLOSE

MODE

VOL

ENTER

SOURCE

SOUND

SCRL DSPL

LIST CATMENU

EQ7

OFF ATT

DSO

67 8 9 0 qaqs qdqf qg

wgwfwdwswaw;qlqkqjqh

continue to next page t

6

*7 Warning when installing in a car without an

ACC (accessory) position on the ignition switch

After turning off the ignition, be sure to press and

hold (OFF) on the unit until the display disappears.

Otherwise, the display does not turn off and this causes

battery drain.

*8 The CAT button is available only when the XM

tuner is connected.

Selecting a disc and album

Disc and album can be skipped using the DISC

(ALBUM) (M/m) buttons.

(With this unit)

(With optional unit)

*9 Available only when an MP3 file is played.

Skipping tracks continuously

Press once either SEEK/AMS (< or ,)

button, then press again within about 1 second

and hold.

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power antenna will extend automatically while

the unit is operating.

Caution

While driving, do not use the CUSTOM FILE

feature or any other functions which may divert

your attention from the road.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit

will not operate properly. In such a case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

To Press

Skip albums*

9

–Album selection

M or m [once for each

album]

To continuously skip

albums, press and hold

either button.

To Press

Skip discs

–Disc selection

M or m [once for each disc]

To continuously skip discs,

press once and press again

within about 1 second (and

hold) either button.

Skip albums*

9

–Album selection

M or m [hold for a moment]

and release.

To continuously skip

albums, press (and hold)

within about 1 second of

first releasing the button.

7

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc

magazines when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a parked car or on a

dashboard/rear tray.

• Do not attach labels, or use discs with sticky

ink/residue. Such discs may stop spinning

when used, causing a malfunction, or may ruin

the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from

using such discs:

– Inability to eject a disc (due to a label or

sticker peeling off and jamming the eject

mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to

heat shrinking of a sticker or label causing a

disc to warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do

not use such discs.

• You cannot play 8 cm (3 in) CDs.

• Before playing, clean the discs with a

commercially available cleaning cloth. Wipe

each disc from the center out. Do not use

solvents such as benzine, thinner, commercially

available cleaners, or antistatic spray intended

for analog discs.

Music discs encoded with copyright

protection

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

copyright protection are marketed by some

record companies. Please be aware that among

those discs, there are some that do not conform to

the CD standard and may not be playable by this

product.

Notes on CD-Rs (recordable CDs)/CD-

RWs (rewritable CDs)

This unit can play the following discs:

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the

condition of the disc) may not play on this unit.

• You cannot play a CD-R/CD-RW that is not

finalized*.

• You can play MP3 files recorded on CD-

ROMs, CD-Rs, and CD-RWs.

• A CD-R/CD-RW to which a session can be

added can be played.

* A process necessary for a recorded CD-R/CD-RW

disc to be played on the audio CD player.

Type of discs Label on the disc

Audio CD

MP3 files

8

About MP3 files

MP3 (MPEG 1 Audio Layer-3) is a standard

technology and format for compressing a sound

sequence. The file is compressed to about 1/10 of

its original size. Sounds outside the range of

human hearing are compressed while the sounds

we can hear are not compressed.

Notes on discs

You can play MP3 files recorded on CD-ROMs,

CD-Rs, and CD-RWs.

The disc must be in the ISO 9660*

1

level 1 or

level 2 format, or Joliet or Romeo in the

expansion format*

2

.

You can use a disc recorded in Multi Session*

3

.

*1 ISO 9660 Format

The most common international standard for

the logical format of files and folders on a

CD-ROM.

There are several specification levels. In

Level 1, file names must be in the 8.3 format

(no more than 8 characters in the name, no

more than 3 characters in the extension

“.mp3”) and in capital letters. Folder names

can be no longer than 8 characters. There can

be no more than 8 nested folder levels. Level

2 specifications allow file names up to 31

characters long.

Each folder can have up to 8 trees.

For Joliet or Romeo in the expansion format,

make sure of the contents of the writing

software, etc.

*2 Expansion format

Joliet: The maximum number of characters

for album (folder) names/track (file) names

that can be displayed is 32 each.

Romeo: The maximum number of characters

for album (folder) names/track (file) names

that can be displayed is 64 each.

*3 Multi Session

This is a recording method that enables

adding of data using the Track-At-Once

method. Conventional CDs begin at a CD

control area called the Lead-in and end at an

area called Lead-out. A Multi Session CD is a

CD having multiple sessions, with each

segment from Lead-in to Lead-out regarded

as a single session.

CD-Extra: The format which records audio

(audio CD data) as tracks on session 1, and

records data as tracks on session 2.

Mixed CD: In this format, data is recorded as

track 1, and audio (audio CD data) is recorded

as track 2.

Notes

• With formats other than ISO 9660 level 1 and level 2,

folder names or file names may not be displayed

correctly.

• When naming, be sure to add the file extension

“.mp3” to the file name.

• If you put the extension “.mp3” to a file other than

MP3, the unit cannot recognize the file properly and

will generate random noise that could damage your

speakers.

• The following discs take a longer time to start

playback.

– a disc recorded with complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added.

• If you play a high-bit rate MP3 file such as 320 kbps,

sound may be intermittent.

Cautions when playing a disc that is recorded in

Multi Session

• When the first track of the first session is audio CD

data:

Only audio CD data of the first session is played

back.

Any data in subsequent sessions is skipped.

• When the first track of the first session is not audio

CD data:

– If an MP3 file is in the disc, only MP3 file(s) is

played back and other data is skipped. (Audio CD

data is not recognized.)

– If no MP3 file is in the disc, “NO Music” is

displayed and nothing is played back. (Audio CD

data is not recognized.)

9

The playback order of the MP3 files

The playback order of the folders and files is as

follows:

Notes

• A folder that does not include an MP3 file is skipped.

• When you insert a disc with many trees, it takes a

longer time to start playback. We recommend that

you make only 1 or 2 trees for each disc.

• Maximum folder number: 150 (including root folder

and empty folders)

• The maximum number of MP3 files and folders that

can be contained in a disc: 300

When a file/folder name contains many characters,

this number may become less than 300.

Tip

To specify a desired playback order, before the folder

or file name, input the order by number (e.g., “01,”

“02”), then record contents onto a disc. (The order

differs depending on the writing software.)

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Press the RESET button with a pointed object,

such as a ball-point pen.

Resetting the unit during use in sub-

display position

Notes

• Pressing the RESET button will erase the clock

setting and some stored contents.

• After resetting the unit, press (OPEN/CLOSE) on the

card remote commander to make sure the front

panel opens and closes correctly once before

operating further.

1

2

6

3

5

7

1

2

6

7

4

8

3

5

8

4

9

Folder (album)

MP3 file (track)

Tree 1

(root)

Tree 2

Tree 4

Tree 5

Tree 3

RESET button

10

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press M or m

repeatedly until “Clock Adjust”

appears.

1 Press (ENTER).

The hour indication flashes.

2 Press M or m to set the hour.

3 Press ,.

The minute indication flashes.

4 Press M or m to set the minute.

2 Press (ENTER).

The clock starts. After the clock setting is

complete, the display returns to normal play

mode.

Tip

When Clock mode is set to “on,” the time is displayed

(page 21).

CD Player

CD/MD Unit (optional)

In addition to playing a CD with this unit, you

can also control external CD/MD units.

Playing a disc

(With this unit)

1 Press (OPEN/CLOSE) or (OPEN) on the

unit and insert the disc (labeled side

up).

Playback starts automatically.

2 Press (OPEN/CLOSE) or (CLOSE) on

the unit to close the front panel.

If a disc is already inserted, press (SOURCE)

repeatedly until “CD” appears to start playback.

11

*1 Pause is available only when playing back on this

unit (when playing back on the optional unit, pause

is not available). To cancel pause, press (6)

(PAUSE) again.

*2 Available only when an MP3 file is played.

To skip tracks continuously, press < or ,,

then press again within about 1 second and hold.

Notes

• Before playing a track, this unit reads all track and

album information on the disc. Depending on the

track structure, it may take more than a minute

before playback begins. During this time, “Read” is

displayed. Play will automatically start when reading

is complete.

• Depending on the condition of the disc, it may not

play back (page 7, 8).

• While the first/last track on the disc is playing, if

< or , is pressed, playback skips to the last/first

track of the disc.

• When the last track on the disc is over, playback

restarts from the first track of the disc.

• If you play a high-bit rate MP3 file such as 320 kbps,

sound may be intermittent.

(With optional unit)

1 Press (SOURCE) repeatedly to select

“CD” or “MD (MS*

1

).”

2 Press (MODE) repeatedly until the

desired unit appears.

Playback starts.

*1 MS: MG Memory Stick System-up Player MGS-X1

*2 Available only when an MP3 file is played.

Cautions when connecting MGS-X1 and MD unit(s)

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press (SOURCE) to

select “MS” or “MD.” When “MS” appears in the

source display, MGS-X1 starts to play. When “MD”

appears in the source display, press (MODE) to

select “MS,” to start playback.

• When you want to play an MD unit, press (SOURCE)

to select “MD” or “MS.” When your desired MD unit

appears in the source display, it starts to play. When

“MS” or another MD unit appears in the source

display, press (MODE) to select your desired MD

unit, to start playback.

Notes when playing back a disc with non-audio CD

data/MP3 file

If a disc with non-audio CD data/MP3 file is inserted:

– in the case of this unit, “NO Music” appears in the

display, and the display becomes the clock display

(CD playback stops).

– in the case of an optional MP3 compatible CD unit,

“NO Music” appears in the display and playback of

the next disc starts.

– in the case of an optional CD unit, which is

incompatible with MP3, the disc will play back with

no sound.

Note

With an optional unit connected, playback of the same

source will continue on to the optional CD/MD unit.

To Press

Pause*

1

(6) (PAUSE)

Stop playback (OFF)

Eject the disc (OPEN/CLOSE) or

(OPEN) then Z on the unit

Skip tracks

–Automatic

Music Sensor

(SEEK) (</,)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (</,)

[hold to desired point]

Skip albums*

2

–Album selection

(DISC) (M/m)

[hold to desired point]

To Press

Skip discs

–Disc selection

(DISC) (M/m)

[once for each disc]

Skip albums*

2

– Album selection

(DISC) (M/m)

[hold to desired point]

12

Display items

When the disc/album/track changes, any

prerecorded title*

1

of the new disc/album/track is

automatically displayed. (If the A.Scroll (Auto

Scroll) function is set to “on,” names exceeding

12 characters will be scrolled (page 21).)

*1 When pressing (DSPL), “NO Disc Name” or “NO

Track Name” indicates that there is no Disc Memo

(page 14) or prerecorded name to display.

*2 Only for CD TEXT discs with the artist name.

*3 Only for MP3 files.

Only track name/artist name/album name in ID3

tag is displayed.

When pressing (DSPL), “NO ID3 Tag” indicates

that there is no ID3 tag to display.

*4 Available only when an MP3 file is played.

*5 Available only when an optional MD unit with the

MDLP function is connected, and an MDLP disc is

played.

Notes

• Some characters cannot be displayed.

• For some CD TEXT discs or ID3 tags with very

many characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc.

Notes on MP3

• ID3 tag applies only to version 1.0, 1.1, 2.2, 2.3 and

2.4.

• Some characters and signs cannot be displayed

(appear as “ s”). The maximum number of

displayable characters for an album (folder) name/

track (file) is 64 (Romeo) or 32 (Joliet); ID3 tag 30

characters (1.0, 1.1, 2.2 and 2.3) or 126 characters

(2.4).

• In the following cases, elapsed playing time may not

be displayed accurately.

– when an MP3 file of VBR (variable bit rate) is

played.

– during fast-forward/reverse.

Tip

When the A.Scroll (Auto Scroll) function is set to “off,”

and the disc/album/track is changed, the disc/album/

track name or ID3 tag does not scroll.

To Press

Switch display

item

(DSPL)

Scroll display item (SCRL)

Track

number

Elapsed

playing time

Disc

number/

Album

number*

4

MP3*

4

/MDLP display*

5

MP3: MP3 playback

LP2: LP2 playback

LP4: LP4 playback

Clock

Source

Displayable items

• Disc name*

1

/artist name*

2

• Album name*

3

• Track name*

1

*

3

• ID3 tag*

3

13

Playing tracks repeatedly

— Repeat Play

You can select:

• REP-Track — to repeat the current track.

•REP-Album*

1

— to repeat the tracks in the

current album.

•REP-Disc*

2

— to repeat the tracks in the

current disc.

*1 Available only when an MP3 file is played.

*2 Available only when one or more optional CD/MD

units are connected.

During playback, press (1) (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

To return to normal play mode, select “REP-off.”

Playing tracks in random

order

— Shuffle Play

You can select:

• SHUF-Album*

1

— to play the tracks in the

current album in random order.

• SHUF-Disc — to play the tracks in the current

disc in random order.

• SHUF-Changer*

2

— to play the tracks in the

current optional CD (MD) changer in random

order.

• SHUF-All*

3

— to play all the tracks in all the

connected CD (MD) units (including this unit)

in random order.

*1 Available only when an MP3 file is played.

*2 Available only when one or more optional CD (MD)

changers are connected.

*3 Available only when one or more optional CD units,

or two or more optional MD units are connected.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears in the display.

Shuffle Play starts.

To return to normal play mode, select “SHUF-

off.”

Note

“SHUF-All” will not shuffle tracks between CD units

and MD units.

14

Labeling a CD

— Disc Memo (When connecting a CD unit

with the CUSTOM FILE function)

You can label each disc with a custom name

(Disc Memo). You can enter up to 8 characters

for a disc. If you label a CD, you can locate the

disc by name (page 15).

1 Start playing the disc you want to label

in a CD unit with the CUSTOM FILE

function.

2 Press (MENU), then press M or m

repeatedly until “Name Edit” appears.

3 Press (ENTER).

4 Enter the characters.

1 Press M*

1

repeatedly to select the

desired character.

A t B t C ... t 0 t 1 t 2 ... t +

t – t

*

... t *

2

t A

*1 For reverse order, press m.

*2 (blank space)

2 Press , after locating the desired

character.

If you press <, you can move back to the

left.

3 Repeat steps 1 and 2 to enter the

entire name.

5 Press (ENTER).

The unit returns to normal play mode.

Tips

• Simply overwrite or enter “ ” to correct or erase a

character.

• There is another way to start labeling a CD: Press

(LIST) (CAT) for 2 seconds instead of performing

steps 2 and 3. You can also complete the operation

by pressing (LIST) (CAT) for 2 seconds instead of

step 5.

• You can label CDs on a unit without the CUSTOM

FILE function if that unit is connected along with a

CD unit that has the function. The Disc Memo will be

stored in the memory of the CD unit with the

CUSTOM FILE function.

Viewing the Disc Memo

As a display item, the Disc Memo always takes

priority over any original CD TEXT information.

Tip

To find out about other items that can be displayed,

see page 12.

Erasing the Disc Memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the

CD unit storing the Disc Memo.

3 Press (MENU), then press M or m

repeatedly until “Name Delete”

appears.

4 Press (ENTER).

The stored names will appear.

5 Press M or m repeatedly to select the

disc name you want to erase.

6 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal play mode.

Notes

• When the Disc Memo for a CD TEXT disc is erased,

the original CD TEXT information is displayed.

• If you cannot find the Disc Memo you want to erase,

try selecting a different CD unit in step 2.

• If you have already erased all of the Disc Memo, “NO

Data” appears and the unit returns to normal play

mode in step 4 or 6.

To Press

View (DSPL) during CD/CD

TEXT disc playback

15

Locating a disc by name

— List-up (When connecting a CD unit with

the CD TEXT/CUSTOM FILE function, or an MD

unit)

You can use this function for discs that have been

assigned custom names*

1

or for CD TEXT

discs*

2

.

*1 Locating a disc by its custom name: when you

assign a name for a CD (page 14) or an MD.

*2 Locating discs by the CD TEXT information: when

you play a CD TEXT disc on a CD unit with the CD

TEXT function.

1 During playback, press (LIST) (CAT).

The name assigned to the current disc appears

in the display.

2 Press M or m repeatedly until you find

the desired disc.

3 Press (ENTER) to play the disc.

Note

Some letters cannot be displayed (exception: the

letters stored by Disc Memo).

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, AM1, and AM2).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (MENU), then press M or m

repeatedly until “BTM” appears.

4 Press (ENTER).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

16

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

Tip

Press M or m to receive the stations in the order they

are stored in the memory (Preset Search function).

If preset tuning does not work

Press < or , to search for the

station (automatic tuning).

Scanning stops when the unit receives a

station. Repeat until the desired station is

received.

Tips

• If automatic tuning stops too frequently, turn on the

Local Seek to limit seek to stations with stronger

signals. For details, see “Changing the sound and

display settings” on page 21.

• If you know the frequency of the station you want to

listen to, press and hold < or , to locate the

approximate frequency, then press < or ,

repeatedly to fine adjust to the desired frequency

(manual tuning).

If FM stereo reception is poor

Select monaural reception mode

For details, see “Changing the sound and

display settings” on page 21.

The sound improves, but becomes monaural

(“ST” disappears).

Note

If interference occurs, this unit will automatically

narrow the reception frequency to eliminate noise (IF

Auto function). In such cases, some FM stereo

broadcasts may become monaural while in the stereo

reception mode.

Tips

• To always hear FM stereo broadcasts in stereo, you

can change the IF Auto setting and widen the

frequency signal reception. For details, see

“Changing the sound and display settings” on

page 21. Note that some interference may occur in

this setting.

• If FM broadcasts are difficult to hear, set DSO to

“OFF” (page 23).

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press < or , to tune in the station

that you want to store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until the preset

number appears.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

17

Storing station names

— Station Memo

You can assign a name to each radio station and

store it in memory. The name of the station

currently tuned in appears in the display. You can

assign a name using up to 8 characters for a

station.

Storing the station names

1 Tune in a station whose name you

want to store.

2 Press (MENU), then press M or m

repeatedly until “Name Edit” appears.

3 Press (ENTER).

4 Enter the characters.

1 Press M*

1

repeatedly to select the

desired character.

A t B t C ... t 0 t 1 t 2 ... t +

t – t

*

... t *

2

t A

*1 For reverse order, press m.

*2 (blank space)

2 Press , after locating the desired

character.

If you press <, you can move back to the

left.

3 Repeat steps 1 and 2 to enter the

entire name.

5 Press (ENTER).

The unit returns to normal radio reception

mode.

Tips

• Simply overwrite or enter “ ” to correct or erase a

character.

• There is another way to start storing station names:

Press (LIST) (CAT) for 2 seconds instead of

performing steps 2 and 3. You can also complete the

operation by pressing (LIST) (CAT) for 2 seconds

instead of step 5.

Erasing the station name

1 During radio reception, press (MEN U),

then press M or m repeatedly until

“Name Delete” appears.

2 Press (ENTER).

3 Press M or m repeatedly to select the

station whose name you want to

erase.

4 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 3 to 4 if you want to erase other

names.

5 Press (MENU) twice.

The unit returns to normal radio reception

mode.

Note

If you have already erased all of the station names,

“NO Data” appears and the unit returns to normal play

mode in step 2 or 4.

18

Tuning in a station through a

list

— List-up

1 During radio reception, press (LIST)

(CAT).

The frequency or the name assigned to the

current station appears in the display.

2 Press M or m repeatedly until you find

the desired station.

If no name is assigned to the selected station,

the frequency appears in the display.

3 Press (ENTER) to tune in the station.

Other Functions

You can also control the unit (and optional CD/

MD units) with a rotary commander (optional).

Using the rotary commander

First, attach the appropriate label depending on

how you want to mount the rotary commander.

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

Press To

(SOURCE) Change the source

(Radio/CD/MD*

1

/AUX*

2

)/

Power on

(MODE) Change operation

(Radio band/CD unit*

1

/MD

unit*

1

)

(ATT) Attenuate the sound

(OFF)*

3

Stop playback or radio

reception/Power off

(SOUND) Adjust the sound settings

(DSPL) Change the display item

(For 2 seconds to scroll the

display item)

SOUND

DSPL

MODE

SOUND

DSPL

MODE

OFF

Rotate the VOL control

to adjust the volume.

(SOURCE)

(SOUND)

(ATT)

(DSPL)

(OFF)

(MODE)

19

By rotating the control

Rotate and release to:

– Skip tracks.

To continuously skip tracks, rotate once

and rotate again within 1 second and hold

the control.

– Tune in stations automatically.

Rotate, hold, and release to:

– Fast-forward/reverse a track.

– Find a station manually.

By pushing in and rotating the control

Push in and rotate the control to:

– Receive preset stations.

– Change discs during CD (MD) playback*

1

.

– Change albums*

4

.

*1 Only if the corresponding optional equipment is

connected.

*2 Available only when an optional Sony portable

device is connected to AUX IN terminal of the unit.

When you connect a Sony portable device and CD/

MD unit(s) at the same time, use the AUX IN

selector.

*3 If your car has no ACC (accessory) position on the

ignition key switch, after turning off the ignition, be

sure to press and hold (OFF) until the display

disappears.

*4 Available only when an MP3 file is played.

When an MP3 file is played, you can select an

album using the rotary commander.

(With this unit)

(With optional unit)

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SOUND) for 2 seconds while

pushing the VOL control.

Tip

You can also change the operative direction of these

controls with the unit (page 21).

SEEK/AMS

control

PRESET/DISC

control

To Do this

Skip albums

– Album selection

Push in and rotate [once for

each album] the control.

To continuously skip

albums, push in and rotate

(and hold) the control.

To Do this

Skip discs

–Disc selection

Push in and rotate [once for

each disc] the control.

To continuously skip discs,

push in and rotate once and

rotate again within about 1

second (and hold) the

control.

Skip albums

– Album selection

Push in and rotate the

control [hold for a moment]

and release.

To continuously skip

albums, push in and rotate

again (and hold) within

about 1 second of first

releasing the control.

To increase

To decrease

20

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, fader,

and subwoofer volume.

1 Press (SOUND) repeatedly to select

the desired item.

Each time you press (SOUND), the item

changes as follows:

BASS (bass) t TREBLE (treble) t

BALANCE (left-right) t

FADER (front-rear)

t

SUB (subwoofer volume)

2 Adjust the level of a selected item by

pressing < or ,.

After 3 seconds, the display returns to the

normal play mode.

Note

Adjust within 3 seconds after selecting the item.

Tip

When adjusting with the rotary commander, press

(SOUND) repeatedly and then rotate the VOL control.

Changing the BBE MP setting

The BBE MP process effectively adds warmth

and provides clear CD quality sound even from

heavily compressed MP3 material.

During playback on this unit, press

(5) (BBE MP) to select “BBE MP-on.”

To cancel the BBE MP, select “BBE MP-off.”

Note

The BBE MP function is available only when playing

back on this unit (when playing back on the optional

unit, BBE MP is not available).

Tip

You can change the BBE MP setting only when

playing back on this unit.

Quickly attenuating the

sound

Press (ATT).

“ATT-on” appears in the display momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

La page charge ...

Sony CDX-M8800 Le manuel du propriétaire

Sony CDX-M8800 Le manuel du propriétaire

dans d''autres langues

Documents connexes