Electrolux E24ID75SPS3A Le manuel du propriétaire

EN DISHWASHER

FR LAVE-VAISSELLE

ES LAVAVAJILLAS

USE AND CARE GUIDE 2

GUIDE D’UTILISATION ET D’ENTRETIEN 23

GUIA DE USO Y CUIDADO 45

EI24ID81S

E24ID75SPS

2

Finding Information

Table of contents Please read and save

this guide

Thank you for choosing Electrolux, the new

premium brand in home appliances. This Use

and Care Guide is part of our commitment

to customer satisfaction and product quality

throughout the service life of your new appliance.

We view your purchase as the beginning of a

relationship. To ensure our ability to continue

serving you, please use this page to record

important product information.

Keep a record for

quick reference

_________________________________

Purchase Date

_________________________________

Model Number

_________________________________

Serial Number

Registering your product with Electrolux

enhances our ability to serve you. You can

register online at www.electroluxappliances.com

or by dropping your Product Registration Card in

the mail.

For toll-free telephone support in the U.S. and

Canada:

1-877-4ELECTOLUX (1-877-435-3287)

For online support and Internet production

information visit:

http://www.electroluxappliances.com

Finding Information ............................................. 2

Important Safety Instructions............................. 3

Feature Overview ................................................. 4

Operating Instructions ..................................... 5-9

Preparing & Loading Dishes ....................... 10-14

Dishwasher Dispenser & Detergents .......... 15-17

Care & Cleaning ................................................. 18

Solutions to Common Problems ................. 19-21

Warranty ............................................................. 22

French ................................................................. 23

Spanish ............................................................... 45

3

Important Safety Instructions

• Do not tamper with controls.

• Use care unloading the dishware when

the SANITIZE option has been selected.

Contents may be hot to the touch

immediately after the end of cycle.

• Under certain conditions, hydrogen gas may

be produced in a hot water system that

has not been used for 2 weeks or more.

HYDROGEN GAS IS EXPLOSIVE. If hot

water system has not been used for such a

period, before using dishwasher, turn on all

hot water faucets and let water ﬂ ow from

each for several minutes. This will release

any accumulated hydrogen gas. HYDROGEN

GAS IS FLAMMABLE. Do not smoke or use

an open ﬂ ame during this time.

• Do not store or use combustible materials,

gasoline or other ﬂ ammable vapors and

liquids in the vicinity of this or any other

appliance.

• Disconnect electrical power to dishwasher

before servicing.

• Repairs should be done by a qualiﬁ ed

technician.

• To avoid entrapment and/or suffocation,

remove door or door latch mechanism from

any dishwasher that is discarded or not in

use.

For your Safety

• Use your dishwasher only as instructed in

this Use and Care Manual.

• This Manual does not cover every possible

condition and situation that may occur. Use

common sense and caution when installing,

operating and maintaining any appliance.

• NSF certiﬁ ed residential dishwashers are not

intended for licensed food establishments.

• DISHWASHER MUST BE ELECTRICALLY

GROUNDED.

This appliance must be

connected to a ground metal, permanent

wiring system, or an equipment-

grounding conductor must be run with the

circuit conductors and connected to the

equipment-grounding terminal or lead on this

appliance. Read the Installation

appliance. Read the Installation Instructions

for details.

• This dishwasher is designed to operate on

regular house current (120V, 60Hz). Use

a circuit equipped with a 15 ampere fuse

or circuit breaker. Use a 20 ampere fuse

if dishwasher is connected with a food

disposer.

• Do not operate dishwasher unless all

enclosure panels are in their proper place.

• Keep young children and infants away from

dishwasher when it is operating.

• To reduce the risk of injury, do not allow

children to play in or on the dishwasher.

• Do not let children abuse, sit, stand or play

on door or racks of a dishwasher.

• Use only detergents and rinse agents

recommended for use in a dishwasher.

• Store dishwasher detergent and rinse agents

out of the reach of children.

• If the dishwasher drains into a food disposer,

make sure disposer is completely empty

before running dishwasher.

• Do not wash plastic items unless marked:

“Dishwasher Safe” or equivalent. Check

with manufacturer for recommendations,

if not marked. Items that are not marked

dishwasher safe may melt and create a

potential ﬁ re hazard.

• When loading items to be washed:

-Locate sharp items and knives so that

they are not likely to damage the door

seal or tub.

-Load sharp items and knives with

the handles up to reduce the risk of cut-

type injuries.

WARNING

To reduce the risk of ﬁ re, electrical shock or

injury when using your dishwasher, follow the

above basic precautions.

WARNING

This symbol will help alert you to such

dangers as personal injury, burns, ﬁ re and

electrical shock.

WARNING

When using your dishwasher, follow basic

precautions, including the following:

SAVE THESE INSTRUCTIONS

4

Feature Overview

How your dishwasher cleans

Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against

soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while loading,

then ﬁ lls with water covering the ﬁ lter area. Water is then pumped through the spray arms. Soil particles

go through and across the ﬁ lter and down the drain as the water is pumped out. This series of steps are

repeated as needed. The number of water ﬁ lls varies with the cycle being used.

Getting Started

To run your dishwasher, follow these basic steps:

1. Load Dishwasher (See Preparing and Loading

Dishes).

2. Add detergent (See Dishwasher Dispenser &

Detergents).

3. Add Rinse Aid, if needed (See Rinse Aid).

4. Run hot water faucet nearest dishwasher until

water is hot. Turn water off.

5. Select desired CYCLE (See Cycle Selections

Chart).

6. Select desired OPTION (See Energy Option

Selection).

7. To start, press START pad and close door

immediately.

Upper Spray Arm

Adjustable Rack

Mechanism

Flex Wash

Silverware Basket

Filters

Serial Label

(located on right

side of door)

Tub Gasket

Cup Shelves

Soft Grip Rack

Middle Spray

Arm

Bottom Rack

Stemware

Holder

Lower Spray

Arm

Detergent

Dispenser

Rinse Aid

Dispenser

Cutlery Tray

Upper Rack

Interior Light

NOTE

Racks and Features in your dishwasher model

may vary in appearance from illustrations in this

manual

5

Operating Instructions

Normal Operating Sounds

Your dishwasher uses energy efﬁ cient motors

for the wash and drain portions of the cycle you

select. Each cycle has a series of water ﬁ lls and

drains for washing and rinsing dishes. As each

cycle begins, you may or may not hear the drain

motor. You may also hear the splashing of water as

it enters the tub and the spray arms as they rotate

and circulate water. The wash motor often pulsates

throughout the cycle, which varies water pressure

and optimizes performance.

Energy Use

The yellow energy guide label that came on your

unit tells how much energy it would use in one year

and how it compares to others that are available.

The energy is based on the Normal cycles

response to tests that apply soils and dishware that

simulate the average use. Eight place settings of

dishware and some serving pieces are used during

the test. The total energy is based on running

the average number of cycles per year, applying

typical soil levels to the dishware and half the time,

selecting the option of using extra energy to more

fully dry the dishware. Actual energy and water use

will depend upon the cycle and options you select.

This will help the cleaning and it will also get the

dishwasher hotter. When the ﬁ nal drain removes

all standing water, the extra heat stored in the

dishware will act to evaporate the remaining water.

Your unit provides a selection of cycles. In general,

the more water used by a cycle and the hotter the

temperatures it reaches the more energy that it

uses. Several cycles, such as the Normal cycle will

change their response based on soil level, options

selected, and ambient conditions. The Normal

cycle is good for all around use. Other cycles are

focused toward special use like the Heavy cycle

that is designed for heavily solid cookware.

If the user prefers to save energy and dry the

dishes by hand they select air dry instead of

heated dry. Air dry is still an option. If you prefer to

spend slightly more energy to get the dishes drier

then turn the air dry option off. In response the

wash and rinse temperatures in the cycle will be

increased.

This unit uses an in-line water heating element

that is located under the tub. There is no exposed

heater that plasticware might come in contact

with or that is accessible to touch. The heat is

taken to the dishware through the heated water.

For this reason, plastic dishware may be placed

where it best ﬁ ts in either the top or bottom

rack. Temperatures are uniform throughout the

dishwasher.

Normal Operating Lights

Your dishwasher pad lights when either the Cycle

or Option desired is selected. All cycle and option

pads have a white back light when the pads are

deselected and turn blue when selected. In Delay

selection and Rinse Aid setting, the deselected

pads are turned off.

NOTE

Your unit has DishSense

TM

Technology that

is used to understand how heavily soiled the

dish load is so the cycle can be automatically

adjusted to the appropriate response. This

helps to prevent energy waste. The sensor is

calibrated at the end of the cycle. For the ﬁ rst

cycle after power is applied (when ﬁ rst installed

or after a power failure) the sensor will not be

calibrated and so cannot determine the soil

load. Therefore, your unit will provide a response

suitable for heavy soils on the ﬁ rst run after power

is restored. This will assure that whatever is

loaded will be cleaned. Energy use during this

ﬁ rst run may be higher than would be typical.

6

Operating Instructions

Wash Cycle Selections

Cycle times are approximate and vary by options

selected. Hot water is necessary to activate

dishwasher detergent and melt fatty food soils.

An automatic sensor checks the water temperature

for the main wash of each cycle. When HI-TEMP

is selected, the sensor checks for an even higher

temperature. Run hot water in a faucet nearest the

dishwasher until water is hot before starting.

Cycle Selections

The Smart Sensor checks the soil level on your

dishes in the Auto, Normal and Eco cycles. Cycle

time and water usage will vary based on the

amount of soil on the dishes.

The dishwasher’s Smart Sensor technology will

determine the type of cycle required to clean the

dishes and will clean more efﬁ ciently every time.

When a partial load of lightly soiled dishes are

placed in the unit, a wash cycle similar to a short

wash will automatically be performed. When a full

load of heavily solid dishes are placed in the unit, a

heavy wash cycle will automatically be performed.

Water usage ranges from approximately 3.0 to 7.4

gallons. Wash time ranges from approximately 118

to 200 mins.

Heavy

For pots, pans, casserole dishes and dinnerware

with dried-on or baked-on soils. Water usage

ranges from approximately 7.1 to 8.1 gallons.

Wash time ranges from approximately 129 to 189

mins.

Normal

For regularly soiled dishes and silverware. Water

usage ranges from approximately 3.0 to 7.4

gallons. Wash time ranges from approximately 118

to 200 mins.

Eco

For lightly soiled and pre-rinsed dishes

and silverware. Water usage ranges from

approximately 4.3 to 7.7 gallons. Wash time ranges

from approximately 86 to 93 mins.

Rinse

For rinsing dishes that will be washed later. Water

usage is approximately 2.2 gallons. Cycle time is

approximately 15 mins.

Favorite

This cycle allows you to program your preferred

cycle and options into one button. To program

this cycle: select the cycle and options your desire

then press and hold the Favorite pad until the pad

becomes blue. The selected cycle and options

are saved as the FAVORITE. All the settings that

were chosen are illuminated with a blue light.

Once programmed, simply press the Favorite pad

to select the saved cycle and options, press the

START pad and close the door immediately to start

your programmed cycle.

Fast

For regularly soiled and pre-rinsed dishes and

silverware. Water usage is approximately 4.5

gallons. Wash time is approximately 30 mins.

Upper

For lightly soiled and pre-rinsed dishes and

silverware when you do not have a full load. Water

usage is approximately 3.5 to 4.3 gallons. Wash

time ranges from approximately 52 to 128 mins.

Stemware

For regularly soiled China and Crystal. Water

usage is approximately 4.9 gallons. Wash time

ranges from approximately 96 to 116 mins.

Auto

NOTE

Opening the door during normal operation will

only pause the selected cycle.

7

Operating Instructions

Energy Option Selections

Hi-Temp

When HI-TEMP option is selected, the dishwasher

heats water in the main wash to approximately

140

0

F (60

0

C).

This increase in water temperature helps

dishwasher detergent remove food, grease and soil

from dishes more effectively and aids in drying. HI-

TEMP option can only be used with AUTO, HEAVY,

NORMAL and UPPER cycles.

Sanitize

To sanitize your dishes and glassware, select the

SANITIZE option. This option heats the water

temperature in the ﬁ nal rinse to 157

0

F (69.4

0

C)

and maintains that temperature for 7 minutes.

SANITIZE is available in Auto, Heavy, and Normal

cycles. Only these sanitization cycles have been

designed to meet NSF requirements.

The cycle time will be extended until the proper

water temperature is reached. Washing action will

continue during the water heating delay. For best

results, the incoming water temperature should be

at least 120

0

F (49

0

C).

If the SANITIZE option is selected, the pad

illuminates with a blue light. The sanitization

criteria may not be satisﬁ ed if there is an

interruption of the cycle, a power failure occurs,

or if incoming water temperature is below 120

0

F

(49

0

C).

Sanitize pad ﬂ ashes at the end of the cycle if the

NSF requirements for sanitization are not reached.

Child Lock Controls/Air Dry

To prevent children from accidently changing the

dishwasher cycle or starting the dishwasher, lock

the dishwasher controls by pressing the AIR DRY

pad until “ ” shows in the status window. The

controls are locked and no new selections can

be made until the lock is released. To unlock

the controls, press the AIR DRY pad until “ ”

disappears.

Max Dry

MAX DRY is available on Auto, Heavy, Normal,

Upper and Stemware cycles The cycle time will

increase when MAX DRY option is selected.

Operation Selection

Delay

The DELAY START option allows you to

automatically delay starting your dishwasher from

1-24 hours.

Select your desired cycle and options, then press

the Delay pad until the desired delay time displays

in the status window. The LEDs of selected cycle

and options are illuminated. The status window

displays the delay time and then displays ‘Press

Start’.

To start the delay countdown, press START pad

and close door immediately. The status window

displays ‘Close’ after the START pad is pressed.

A tone will sound indicating that countdown has

started after the door is closed. The selected cycle

starts when the countdown is completed.

When cycle and options are selected, the LEDs

of selected cycle and options are illuminated. The

status window displays the cycle time and then

displays ‘Press Start’.

To start the cycle, press START pad and close the

dishwasher door immediately.

The status window displays ‘Close’ after the START

pad is pressed.

A tone will sound indicating the cycle has

successfully started after the door is closed.

Start

Both running cycle and delay countdown can be

cancelled at any time. Open the dishwasher door,

press the CANCEL pad until you hear a tone. The

running cycle or delay countdown is cancelled.

If desired, a new cycle can now be selected, by

pressing the START pad and closing the door

immediately, the new cycle will begin.

If you have selected your cycle and options and

decide to cancel, press the CANCEL pad, the unit

will go into a stand-by mode, which all LEDs will go

out.

Cancel

8

Status window

That STATUS window display codes typically seen

during the programming of the dishwasher. The

STATUS window will not illuminate when the unit

is running. The STATUS window indicates the

following activities:

Opening the door while the

appliance operates

If you open the door while a cycle is running or

delay is counting down, the appliance stops.

The LEDs of selected cycle and options are

illuminated. The status window displays the

remaining cycle time or delay time and then

displays ‘Press Start’.

To resume, press START pad and close the

dishwasher door immediately. The status window

displays ‘Close’ after the START pad is pressed.

A tone will sound indicating that the dishwasher

continues from the point of interruption after the

door closing.

If the dishwasher door is kept open for too long,

or the door is closed without pressing START

pad, the running cycle or delay countdown may be

cancelled.

The cycle duration remaining

time.

Remaining time of Delay

start

End of cycle

Error codes

1HR-24HR - Indicates

number of delay start

hours for selected

cycle.

PRESS START -Scroll

across the status

window indicating the

START pad needs to be

pressed.

CLOSE - Scroll across

the status window once

the program has been

entered and the START

pad is pressed.

Child Lock is

activated.

MIN - The cycle duration

or the remaining time.

L1 - L4 - Level of Rinse

Aid Dosage.

LOW RINSE - Reﬁ ll

Rinse Aid

CLEAN - End of Cycle.

Display on floor

The display on ﬂ oor indicates the following

activities:

Green and Blue lights on the

Floor

When the GREEN LIGHT illuminates on the ﬂ oor

this indicates that the wash cycle is complete.

When the BLUE LIGHT illuminates on the ﬂ oor this

indicates that the wash cycle is operating.

This feature is available on E24ID75SPS model

only

This feature is available on EI24ID81S model only

9

Error Codes

Displayed

Error Code*

Problem Solution

i10

A low ﬁ ll has been detected.

Look for a pinched water supply line, or water shutoff is

not completely opened.

i20;

i40;

iF0

Clogged ﬁ lters or a restricted

drain line has been detected.

Check and clean both ﬁ lters and sump area and check

for a pinched or blocked drain hose. If the drain line is

attached to a disposer, check that the knockout plug

has been removed.

i30

A leak or overﬂ ow of water

has been detected in the

bottom pan.

Look for loose connections at the water inlet valve and

ensure the unit is properly leveled.

i50

A problem has been

detected with the drain or

wash motor.

Pressing the cancel button or turning power off at the

breaker for 5 min. should clear this error code and

the unit can be restarted.

If this does not resolve the problem, service

will need to be called.

i60

A problem has been

detected with the water

heating system.

iC0

A problem has been

detected with the electronic

control system.

*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min.

does not resolve the problem, contact the Electrolux Customer Care Center at 1-877-435-3287.

User Instruction Code

Instruction

Code

Displayed

Problem

Solution

Close This indicates the door has been

left open or not properly latched.

Ensuring the door is properly latched will clear

the display. This does not indicate a problem with

your dishwasher and service will not need to be

contacted.

Operating Instructions

10

Preparing & Loading Dishes

Dish Preparation

Scrape away large pieces of food, bones, pits,

toothpicks, etc. The continuously ﬁ ltered wash ﬂ uid

will remove remaining food particles. Burned-on

foods should be loosened before loading. Empty

liquids from glasses and cups.

Foods such as mustard, mayonnaise, vinegar,

lemon juice and tomato based products may

cause discoloration of stainless steel and plastics

if allowed to sit for a long period of time. Unless

the dishwasher is to be operated at once, it is best

to pre-rinse or use the rinse only cycle to rinse off

these food soils.

Load racks so that large items do not prevent the

detergent dispenser from opening.

Check manufacturer’s recommendations before

washing items in question.

If the dishwasher drains into a Food Disposer, be

sure disposer is completely empty before starting

dishwasher.

Features and appearance of racks and silverware

basket may vary from your model.

The upper rack is designed for ﬂ exibility in loading

a wide variety of items including cups, glasses,

stemware, small plates, bowls, etc.

Load glasses and plastic items in Upper rack only.

Load items with open end facing down for better

cleaning and draining.

Damage may occur if delicate items touch each

other during dishwasher operation.

Long-handled knives and utensils can be placed in

Upper rack.

Be sure nothing protrudes through the bottom of

the rack to block rotation of middle spray arm.

NOTE

Racks and Features in your dishwasher model

may vary in appearance from illustrations in this

manual.

Loading the Upper Rack

Loading the Cutlery Rack

The Cutlery Rack is designed for ﬂ atware and

most cooking or serving utensils. Heavily soiled

utensils or items with baked on foods should be

placed in the upper rack or silverware basket for

best washing performance. The seperators on the

cultery racks help keep ﬂ atware separated to avoid

damage and improve cleaning.

11

Preparing & Loading Dishes

Adjustable Upper Rack

The top rack height can be easily adjusted to

accommodate loading taller dishes in either rack.

To raise the rack to the upper position, lift rack

until both sides are at the same height and the

rack will secure in place. Ensure that the rack

remains level from front to back with both sides at

the same height. To lower rack lift the rack slightly

then push down and release.

Flex Wash

The Flex Wash system gives you the ability to wash

the inside areas of baby bottles, narrow glassware

and other items. To turn this feature on turn these

clips to have them pointing upward (B). To turn off

just slide them back down toward the rack (A). See

image below.

A

B

10 place settings standard loading pattern

12 place settings standard loading pattern

8 place settings standard loading pattern

12

Fold-down Tines Upper Rack

The fold-down tines in the top and bottom racks

makes it easy to load those extra large and hard-

to-ﬁ t items. The tines may be left up for normal

use or folded down for more ﬂ exible loading.

Upper Rack

Preparing & Loading Dishes

Upper Rack

The Cupshelf holder can be folded down to be

used to load two levels of cups, juice glasses, and

other short items or fold down both and use for

long items such as utensils and spatulas. Fold up

to load tall glasses.

Cup Shelf/Stemware Holders

The Stemware holder is used to securely

hold your wine glasses in place for the best

wash. To properly secure you glass simply

press the stem of the glass into the center

of the Cupshelf the plastic pieces will secure

around the stem to hold the glass in place.

Soft Grip Rack

The Soft Grip Rack is used to secure in place

glassware and those plastic items that may move

around with the water from the spray arm.

13

Preparing & Loading Dishes

Loading the bottom Rack

Features and appearance of racks and silverware

basket may vary from your model.

The lower rack is best for plates, saucers, bowls,

and cookware. Large items should be placed

along the edge so they do not block the spray arm

rotation. For best results, place bowls, casseroles,

and sauce pans with soiled surface facing down or

toward the center. Tilt slightly for better drainage.

Make sure tall items do not block spray arm

rotation.

Be sure pan handles do not protrude through the

bottom of the rack and block the spray arm rotation.

8 place settings standard loading pattern

10 place settings standard loading pattern

12 place settings standard loading pattern

Bottom Rack

Fold-down Tines lower Rack

The fold-down tines in the top and bottom racks

makes it easy to load those extra large and hard-

to-ﬁ t items. The tines may be left up for normal

use or folded down for more ﬂ exible loading.

14

Preparing & Loading Dishes

Features and appearance of racks and silverware

basket may vary from your model.

Load the silverware basket while it is in the bottom

rack or take the basket out for loading on a counter

or table.

In some models small items like baby bottle caps,

jar lids, corn cob holders, etc., Can be placed in

a covered section. Close the cover to hold small

items in place.

Loading the Silverware Basket

Use suggested loading patterns, as shown, to

increase washability of the silverware.

Be sure nothing protrudes through bottom of

basket or rack to block the spray arm.

Do not mix silver and stainless to avoid damaging

the silver ﬁ nish.

CAUTION

TO AVOID CUT INJURY: Load sharp items

(knives, skewers, etc.) pointing down. Failure to

do so may result in injury.

When covers are up, mix items in each section of

the basket with some pointing up and some down

to avoid nesting. Water spray cannot reach nested

items.

To add or remove items after wash cycle starts:

Unlatch door and wait a few seconds until wash

action stops before opening.

Add the item. To resume cycle, press START pad

and close the door ﬁ rmly to latch immediately.

Adding a dish

15

Dishwasher Dispenser & Detergents

The detergent dispenser has one covered cup.

The covered cup opens automatically to release

detergent.

• Use only fresh automatic dishwashing

detergent. Other detergents may cause

oversudsing.

• When using automatic dishwashing detergent

tabs, place one tab in main wash cup and

close.

• Add detergent just before starting cycle.

• Store detergent in a cool, dry location. Moist or

caked detergent may not dissolve properly.

Filing the Detergent Dispenser

CAUTION

The use of industrial grade detergent can damage

parts of the dishwasher leading to damage to

the unit and surrounding property. Use only

household grade automatic dishwasher detergent.

NOTE

Hard water may cause lime deposit buildup

on the interior of the dishwasher. For cleaning

instructions see “Removing Spots and Film”

section.

How much Detergent to use

The amount of detergent to use depends on the

water hardness. Water hardness is measured in

grains per gallon. Using too little detergent can

result in poor cleaning and hard water ﬁ lming or

spotting. Using too much detergent in soft water

can cause etching to some glassware which is

surface damage that appears like a ﬁ lm but cannot

be wiped off. Your local water company, water

softener company or county extension agent can

tell you the water hardness in your area.

Main Wash Cup

Main Wash Cover

Cover

Latch

NOTE

Detergent tablets and All-In-One packs may not

dissolve completely if used with the Quick Wash

cycles. If one of these products are used, place

the tab or pack directly on the bottom of the tub

in a corner before starting the dishwasher, rather

than placing these products in the dispenser.

NOTE

To achieve the best results from your dishwasher,

visit www.dishwashingexpert.com for general tips

regarding the performance and operation of your

dishwasher.

16

Dishwasher Dispenser & Detergents

Detergent Usage Chart

Soft Water

(0-3 grains)

Medium Hard Water

(4-8 grains)

Hard Water

(9-12 grains)

4 teaspoons

First Line

6 teaspoons

Second Line

8 teaspoons

Full

NOTE

For very hard water, detergent alone may not be enough. A water softener is recommended to improve

water quality and dishwashing performance. Try adding more detergent at the beginning of the main

wash portion of the cycle. As a rule, use 1 teaspoon for each grain above 12. Unlatch the door, open

slowly add detergent to the bottom of the tub. Close the door to latch and the diswasher will continue

through the cycle.

Water Hardness

Amount

(teaspoons)

Dosage of detergent

Place a single detergent tablet or packet into the detergent dispenser compartment.

Dispenser

cup level:

17

Dishwasher Dispenser & Detergents

Rinse Aid

Rinse aid greatly improves drying, reduces water

spots, ﬁ lming, and lubricates wash arm bearing for

proper rotation. With it water “sheets” off dishes

rather than forming water droplets that cling and

leave spots.

A dispenser, located next to the detergent cup,

automatically releases a measured amount of rinse

aid during the last rinse. If spotting and poor drying

are problems, increase the amount of rinse aid

dispensed. The indicator will be dark when full and

the status window will show LOW RINSE when it is

time to reﬁ ll.

Do not overﬁ ll since this can cause oversudsing.

Wipe up any spills with a damp cloth.

The dispenser holds enough for 11 to 66 washes,

depending on setting.

To add liquid rinse aid, open the cover. Pour in

rinse aid until liquid touches the indicated ﬁ ll level.

Close the cover.

Indicator

Rinse Aid

Compartment

Rinse Aid Cover

Water Pressure

The hot water line to dishwasher must provide

water pressure between 20 and 120 psi.

Low water pressure may occur when laundry or

showers are in operation. If you experience poor

wash performance you may need to wait until water

use is reduced before starting dishwasher.

How to adjust the rinse aid

dosage

The rinse aid dosage is shown in the Status

Window. Press and hold the RINSE pad for 5

seconds until the Status Window shows L1, L2,

L3 or L4, RINSE pad illuminates with white light,

while the other pads are off. Pressing “RINSE” pad

will change the levels. Once the Rinse-aid level

reaches L4, the level will go back to L1 and start

the count over. Press START pad to save setting,

the setting will be shown for 10 seconds. Press

START pad to save.

Water Temperature

Hot water is needed for best dishwashing and

drying results. Water entering dishwasher should

be at least 120

o

F (49

o

C) to give satisfactory results.

To check water temperature entering dishwasher:

• Turn on hot water faucet nearest dishwasher

for several minutes to clear cool water from

pipes.

• Hold a candy or meat thermometer in the water

stream to check the temperature.

• If temperature is below 120

o

F (49

o

C), have

a qualiﬁ ed person raise the hot water heater

thermostat setting.

IMPORTANT

Before starting a cycle, run hot water to clear

cool water from pipes.

Not selecting the AIR DRY option in

combination with rinse aid will enhance drying

performance. The energy required to use the

AIR DRY option saves pennies per cycle. You

may choose to select the AIR DRY option;

however you will have items in your dish load

that will not be completely dry at the end of the

cycle.

Factors Affecting Performance

18

Care & Cleaning

Clean the Cylinder Fine Filter

The Cylinder Fine Filter is designed to collect some

big items such as broken glass, bones and pits.

The Cylinder Fine Filter needs to be cleaned to

maximize wash performance.

Remove the Cylinder Fine Filter as shown, rotate

it counterclockwise, lift it out, empty and clean it by

rinsing under running water and replace. It may

be necessary to use a sponge or bottle brush to

remove excess food residue.

Outside - Occasionally wipe with a mild

nonabrasive detergent and water. Rinse and dry.

Care of Drain Air Gap

If a drain air gap was installed for your built-in

dishwasher, check to make sure it is clean so the

dishwasher will drain properly. A drain air gap is

usually mounted on the counter top and can be

inspected by removing the cover. This is not part

of your dishwasher and is not covered by warranty.

Clean the Coarse Filter

Take out the Cylinder Fine Filter and remove the

Coarse Filter from the dishwasher tub bottom.

Flush the Coarse Filter by holding it under running

water and replace.

19

Winterizing

To Disconnect Service:

1. Turn off electrical power to the dishwasher

at the supply source by removing fuses or

tripping circuit breaker.

2. Shut off water supply.

3. Place a pan under the inlet valve. Disconnect

water line from the inlet valve and drain into

pan.

4. Disconnect drain line from pump and drain

water into pan.

To Restore Service:

1. Reconnect the water, drain, and electrical

power supply.

2. Turn on water and electrical power supply

3. Fill detergent cup and run the dishwasher

through HEAVY WASH cycle.

4. Check connections to make sure they do not

leak.

CAUTION

Freezing temperatures may cause water lines to

rupture. Be sure all supply lines to and circulating

lines within your dishwasher are protected.

Failure to do so could result in property damage.

NOTE

See Installation Instructions for more details.

Before calling for service, review this list. If

may save you both time and expense. This list

includes common experiences that are not the

result of defective workmanship or material in

your dishwasher.

Food Soils Left on Dishes

• Choose another cycle for longer washing time.

• Choose the Hi-Temp Wash option.

• Check rack loading section for proper loading-

avoid nesting items.

• Home water pressure may be too low-should

be 20 to 120 pounds per square inch (psi).

• Check incoming water temperature. It should

be about 120

o

F (49

o

C). (See Factors Affecting

Performance.)

• Check water hardness. For extremely hard

water, it may be necessary to install a water

softener. (See Detergent Chart).

• Use Fresh Detergent.

• Make sure items are not blocking the spray

arms, preventing them from rotating.

• Select heat dry option.

• Make sure the rinse aid dispenser is ﬁ lled.

• Increase the discharge setting of rinse aid.

(See Rinse Aid).

• Check the incoming water temperature. Be

sure it is at least 120

o

F (49

o

C).

• Check for proper loading-avoid nesting items.

• Plastic items may need to be towel dried.

• Cups with a concave bottom will collect water.

Load them at the far left of the upper rack so

they will be held in a tilted position.

Dishes not Dry

A dishwasher left in an unheated place should be

protected from freezing. Have a qualiﬁ ed person

do the following.

NOTE

To achieve the best results from your dishwasher,

visit www.dishwashingexpert.com for general tips

regarding the performance and operation of your

dishwasher.

Solutions to Common Problems

20

Solutions to Common Problems

Glassware/Flatware Spotted or Cloudy

• Check water hardness. For extremely hard

water, it may be necessary to install a water

softener. (See Detergent Chart).

• Water temperature may be low. Avoid

extremely low or high temperatures. (See

Factors Affecting Performance.

• Avoid overloading and improper loading. (See

Preparing and Loading Dishes).

• Use fresh detergent. Old detergent is

ineffective.

• Make sure rinse aid dispenser is ﬁ lled.

• Check to see that proper amount of detergent

is being used for cycle selected. Also, check

phosphate level. (See Detergent Dispenser.)

• Home water pressure may be too low - it

should be 20 to 120 pounds per square inch

(psi).

Water in Bottom of Tub

• Water left in the tub bottom after the cycle is

complete is not normal. If water remains in the

bottom of the tub, the dishwasher may not be

draining properly. (See Dishwasher Does not

Drain Properly).

Dishware Chipped

• Load with care and do not overload. (See

Preparing and Loading Dishes).

• Place delicate items in top rack.

• Place glasses securely against pins and not

over pins.

• Load items so they are secure and don’t jar

loose when moving racks in and out. Move

racks in and out slowly.

• Make sure tall glasses and stemware will clear

top of tub when rack is pushed in.

Dishware Stained or Discolored

• Tea and coffee can stain cups. Remove the

stains by hand washing in a solution of 1/2 cup

(120 ml) bleach and one quart (1L) of warm

water. Rinse thoroughly.

• Aluminum utensils can leave gray/black marks

when they rub against other items. Load

Properly.

• Certain high acid foods can cause discoloration

of stainless steel and plastics if allowed to sit

for a long period. Use the Rinse Only cycle or

rinse by hand if not operating dishwasher at

once.

• Mixing stainless steel and silver utensils in

silverware basket can cause pitting of the

stainless steel blades. Avoid mixing stainless

steel and silver.

Cycle Takes a Long Time

• Is cycle in a water heating delay?

• Has the delay start option been selected?

• Has the sanitize option been selected?

Normal Sounds You Will Hear

• Normal sounds include water ﬁ ll, water

circulation and motor sounds.

Dishwasher Leaks

• Use only fresh detergent designed for

automatic dishwashers. Measure detergent

carefully. Try a different brand.

Etching

• Using too much detergent especially in soft or

softened water causes damage that looks like

a ﬁ lm but cannot be removed.

• Adjust the amount of detergent based on the

water hardness. (Check Detergent Chart).

• Lower the water temperature.

• Iron deposits in water can cause a yellow or

brown ﬁ lm. A special ﬁ lter installed in the

water supply line will correct this problem. (See

Removing Spots and Film).

Detergent Left in Dispenser Cup

• Detergent may be old. Discard and use fresh

detergent.

• Be sure the dish load doesn’t block spray from

entering the detergent cup.

• Check to see if cycle has been completed.

• Make sure items do not prevent the detergent

dispenser from opening.

La page charge ...

Electrolux E24ID75SPS3A Le manuel du propriétaire

Ce manuel convient également à

Electrolux E24ID75SPS3A Le manuel du propriétaire

dans d''autres langues

Autres documents