M906 Vertical Wireless Mouse
manual
Features:
1. Silicone roller, feel comfortable
2. High sensitivity engine
3. Self-contained switch, instant power saving
4. Hidden mini USB receiver, anti-lost
5. Fit the wrist and hold it naturally
Specification Description:
1. Size: 11.6cmx7.6cmx4.8cm
2. Color: black/white
3. Connection: 2.4G
4. Number of keys: 3 keys
5. Working voltage: 1.5V
6. Working current: 25mA
7. Working temperature and humidity: -25～55℃/<85%RH
8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
9.Receiver information:Current: 20mA
Instructions:
Open the battery cover at the bottom of the mouse, put an AA battery (AA battery) into the
battery slot, take out the receiver, cover the battery cover of the mouse, turn on the power of the
mouse, turn the toggle switch to "ON", then turn on the receiver. It can be used by inserting it
into the USB port of the computer.
Precautions:
1. Do not expose the battery to humidity and high temperature, and avoid contact with
conductive materials or liquids
2. Do not short circuit
3. Do not disassemble or attempt to repair this product by yourself.
4. If the product does not operate normally, please contact the after-sales department in time to
obtain relevant services or maintenance
storage method:
Power off storage, do not expose to humidity, high temperature environment
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
ISED
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1) L'appareil ne doit pas produire de brouillage;
2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Cet émetteur ne doit pas être colocalisé ou fonctionner en conjonction avec une autre antenne ou un
autre émetteur.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
Le matériel a été évalué pour répondre aux exigences générales d’exposition aux radiofréquences.Le
dispositif peut être utilisé dans des conditions d ‘exposition portables illimitées.
-
1
-
2
-
3
