Miniso K616-833 Manuel utilisateur
- Catégorie
- Claviers
- Taper
- Manuel utilisateur
Ce manuel convient également à
K616-833 wireless keyboard and mouse set
manual
Features:
1. The keyboard and mouse share a USB receiver and both the keyboard and mouse have their
own receiver storage compartment to prevent loss
2. 2.4G connection, 10 meters stable transmission distance
3. The bottom bracket design of the keyboard can adjust the angle of the keyboard for easy use
4. Low power consumption, automatically enter power saving mode when not in use
5. Mute mouse buttons
Specification Description:
mouse:
1. Size: 9.8cmx5.8cmx3.7cm
2. Color: pink
3. Connection: 2.4G
4. Number of keys: 3 keys
5. Working voltage: 1.5V
6. Working current: 25mA
7. Working temperature and humidity: -25～55℃/<85%RH
8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
keyboard:
1. Size: 36.6cmx13.1cmx2.4cm
2. Color: pink
3. Connection: 2.4G
4. Number of keys: 100 keys
5. Working voltage: 1.5V
6. Working current: 20mA
7. Working temperature and humidity: -25～55℃/<85%RH
8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
Instructions:
Open the battery cover at the bottom of the keyboard, take out the receiver, insert the receiver
into the USB port of the computer, put a AA battery (AA battery) into the battery slot, cover the
keyboard battery cover, and then open the battery cover of the mouse to put a battery Insert AA
batteries (AA batteries) into the battery slot and then cover the mouse battery cover to use.
Precautions:
1. Do not expose the battery to humidity and high temperature, and avoid contact with
conductive materials or liquids
2. Do not short circuit
3. Do not disassemble or attempt to repair this product by yourself.
4. If the product does not operate normally, please contact the after-sales department in time to
obtain relevant services or maintenance
storage method:
Power off storage, do not expose to humidity, high temperature environment
Receiver information:
1. Current: 20mA
2. USB interface: Compatible with USB 1.1/2.0/3.0
3. Product size: 18.5*14.5*5.5mm
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
ISED
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1) L'appareil ne doit pas produire de brouillage;
2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Cet émetteur ne doit pas être colocalisé ou fonctionner en conjonction avec une autre antenne ou un
autre émetteur.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
Le matériel a été évalué pour répondre aux exigences générales d’exposition aux radiofréquences.Le
dispositif peut être utilisé dans des conditions d ‘exposition portables illimitées.
-
1
-
2
-
3
Miniso K616-833 Manuel utilisateur
- Catégorie
- Claviers
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Miniso K616-833 User manual