Fender EXP-1 Le manuel du propriétaire

Fender
Marque
Fender
Modèle
EXP-1
Catégorie
Jouets
Taper
Le manuel du propriétaire
FINAL SHEET DIMENSIONS: 215mm x 332mm
(CUT ON CROP MARKS)
FRONT COVERBACK COVER
FOLDED DIMENSIONS: 215mm x 83mm
(FOLD TWICE IN HALF)
FOLD 1
> <
FOLD 1
FOLD 2
> <
FOLD 2
FOLD 2
> <
FOLD 2
P/N 2301050000
EQUIPO DE AUDIO
IMPORTADO POR: Instrumentos Musicales Fender S.A. de C.V., Calle Huerta # 132, Col. Carlos Pacheco, C.P. 228890, Ensenada, Baja California, Mexico.
RFC: IMF870506R5A Hecho en China. Servicio de Cliente: 001-8665045875
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA, USA
Fender®, Mustang™ and Fender® FUSE™ are trademarks of FMIC.
Copyright © 2011 FMIC. All rights reserved.
P/N 1157CMU004 REV. A
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FCC COMPLIANCE NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not used in accordance with the instructions, may cause harmful interference to radio communications
and there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or
relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment
into an outlet on a circuit different from that of the receiver. Consult the dealer or an experienced radio/TV technician
if help is needed with interference. NOTE: FMIC will not be responsible for unauthorized equipment modifications
that could violate FCC rules, and/or void product safety certifications.
有毒有害物质或元素
(Hazardous Substances’ Name)
部件部件名称
(Part Name)
铅
(PB)
汞
(Hg)
镉
(Cd)
六价铬
(Cr
6+
)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
部分电子元件
x o o o o o
部分机器加工金属部件
x o o o o o
部分其他附属部件
x o o o o o
O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的现量要求以下
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的现量要求
FOLD 1
> <
FOLD 1
FOLD 2
> <
FOLD 2
FOLD 2
> <
FOLD 2
EN: The EXP-1 is a two-mode expression pedal that is
compatible with Fender® Mustang™ III/IV/V ampliers and the
Mustang™ Floor pedal. It can also be daisy-chained together
with a Fender® MS-4 footswitch (P/N0080996000) for additional
exibility.
SYSTEM REQUIREMENTS: To use the EXP-1 expression pedal
with a Mustang amplier, install the latest version of Fender®
FUSE™ software on a PC computer running Windows 7, Vista
or XP, or a Mac computer with Intel® processors running OSX
version 10.5 (Leopard) or above. You can download Fender
FUSE software free of charge, from fuse.fender.com. Please
also download the Fender FUSE owner’s manual and turn to the
EXP-1 section for step-by-step instructions on how to calibrate,
congure and get the most out of your EXP-1 expression pedal!
SP: El EXP-1 es un pedal de expresión de doble modo compatible
con los amplicadores Fender® Mustang™ III/IV/V y la pedalera
Mustang™ Floor. También puede conectarlo en cadena con
una pedalera Fender® MS-4 (referencia0080996000) para una
mayor exibilidad.
REQUISITOS DEL SISTEMA: Para usar el pedal de expresión
EXP-1 con un amplicador Mustang, instale la última versión del
software Fender® FUSE™ en un PC con Windows 7, Vista o XP,
o en un Mac con procesadores Intel® y el sistema OSX versión
10.5 (Leopard) o posterior. Puede descargarse gratis el software
Fender FUSE desde la web fuse.fender.com. Descárguese
también el manual de instrucciones del Fender FUSE y vea en
la sección EXP-1 instrucciones paso-a-paso de cómo calibrar,
congurar y sacar el máximo partido de su pedal EXP-1!
FR: L’EXP-1 est une pédale d’expression à deux modes
compatible avec les amplis Fender® Mustang™ III/IV/V et
la pédale Mustang™. Elle peut également être reliée à un
contacteur au pied Fender® MS-4 (Réf.0080996000) pour une
polyvalence accrue.
SYSTÈME REQUIS : Pour utiliser la pédale d’expression EXP-1
avec un ampli Mustang, installez la dernière version du logiciel
Fender® FUSE™ sur un PC avec Windows 7, Vista ou XP, ou un
Mac (processeurs Intel®) avec OSX version 10.5 (Leopard) ou
plus récent. Vous pouvez télécharger Fender FUSE gratuitement
sur le site fuse.fender.com. Téléchargez également le mode
d’emploi de Fender FUSE et lisez la section sur l’EXP-1 sur la façon
de calibrer, congurer et utiliser l’EXP-1 de façon optimale!
IT: EXP-1 è un pedale di espressione a due modalità compatibile
con gli ampli Fender® Mustang™ III/IV/V e il pedale Mustang™.
Puoi anche concatenarlo a un interruttore a pedale Fender®
MS-4 (C/P 0080996000) per una maggiore versatilità.
REQUISITI DI SISTEMA: per usare il pedale di espressione
EXP-1 con un ampli Mustang, installa l’ultima versione del
software Fender® FUSE™ su un PC con Windows 7, Vista o XP,
o un Mac con processore Intel® e OS X versione 10.5 (Leopard)
o successiva. Puoi scaricare gratuitamente il software Fender
FUSE da fuse.fender.com. Scarica anche il manuale utente
di Fender FUSE e consulta la sezione EXP-1: troverai istruzioni
dettagliate su come calibrare, congurare e usare al meglio il
tuo pedale di espressione EXP-1.
DE: Das EXP-1 ist ein Expressionpedal mit 2 Modi. Es ist
kompatibel mit Fender® Mustang™ III/IV/V Amps und dem
Mustang™ Floor Pedal. Für mehr Flexibilität kann es auch
mit einem Fender® MS-4 Fußschalter (Art.-Nr. 0080996000)
gekoppelt werden.
SYSTEMANFORDERUNGEN: Für den Einsatz des EXP-1 mit
Mustang Amps installieren Sie die neueste Version der Fender®
FUSE™ Software auf einem PC mit Windows 7, Vista oder XP
bzw. einem Mac mit Intel® Prozessoren und OSX Version 10.5
(Leopard) oder höher. Sie können die Fender FUSE Software
gratis unter fuse.fender.com herunterladen. Bitte laden Sie
auch das Fender FUSE Bedienungshandbuch herunter und
lesen Sie im EXP-1 Kapitel die schrittweisen Anleitungen zur
Kalibrierung, Konguration und optimalen Nutzung Ihres EXP-1!
PT: O EXP-1 é um pedal com dois modos de expressão que é
compatível com os amplicadores Fender® Mustang™ III/IV/V e
com o pedal Mustang™ Floor. Ele também pode ser conectado
em cadeia com um pedal Fender® MS-4 (P/N 0080996000) para
obter mais exibilidade.
EXIGÊNCIAS DO SISTEMA: Para usar o pedal de expressão
EXP-1 com um amplicador Mustang, instale a versão mais atual
do software Fender® FUSE™ em um computador PC (Windows
7, Vista ou XP), ou em um computador Mac com processadores
Intel® rodando a versão OSX 10.5 (Leopard) ou superior. Pode-se
baixar Fender FUSE gratuitamente, a partir do site fuse.fender.
com. Favor, baixar o manual do usuário Fender FUSE também
e verique a seção EXP-1 para obter instruções passo a passo
sobre como calibrar, congurar e obter o melhor resultado
possível do seu EXP-1 expression!
JP: EXP-1 は 2 モ ー ド の エ ク ス プ レ ッ シ ョ ン ・ ペ ダ
ル で、 Fender® Mustang™ III/IV/V お よ び、 Mustang™
Floor ペ ダ ル に 使 用 で き ま す。ま た、Fender® MS-4 フ
ッ ト ス イ ッ チ (品 番0080996000) と デ イ ジ ー チ ェ
イ ン 接 続 す る と 、 さ ら に フ レ キ シ ブ ル に ご 活 用 い
た だ け ま す。
システム要件: EXP-1エクスプレッション・ペダルをMustang
アンプリファーに使用するには、Fender® FUSE™ ソフトウ
ェアの最新バージョンを、Windows 7、Vista または XPを
搭載したPCコンピューターもしくは、Intel®プロセッサー搭
載の、OSXのヴァージョン10.5(Leopard)以降のMacコンピ
ューターにインストールしてください。 Fender FUSEソフト
ウェアは、fuse.fender.com より無料でダウンロードしていた
だけます。 同時にFender FUSE オーナーズ・マニュアルも
ぜひダウンロードください。EXP-1の章に、キャリブレーショ
ンや設定、EXP-1エクスプレッション・ペダルを最大限 活用す
るための方法がわかりやすく解説されておりますので、どうぞ
ご利用くださいl!
TM
SETUP
®
™
MUSTANG III-IV-V
  • Page 1 1
  • Page 2 2

Fender EXP-1 Le manuel du propriétaire

Fender
Marque
Fender
Modèle
EXP-1
Catégorie
Jouets
Taper
Le manuel du propriétaire
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents