Huf 3145 Door Handle Manuel utilisateur

3145 Door Handle
Marque
Huf
Modèle
3145 Door Handle
Taper
Manuel utilisateur
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 1 of 10 11.03.2022
Huf Hülsbeck & Fürst
Technical Description
and
User’s Manual
of the
Door-Handle with NFC
Model: HUF13145
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 2 of 10 11.03.2022
Huf Hülsbeck & Fürst
Contents
1 General description of the door-handle ...................................................................................................... 3
2 Communication Interfaces.......................................................................................................................... 4
3 Block diagram ............................................................................................................................................. 5
4 Technical data ............................................................................................................................................ 6
4.1 Electrical characteristics ...................................................................................................................... 6
4.2 Connector definition ............................................................................................................................. 6
4.3 General NFC specification ................................................................................................................... 6
5 Declaration of Conformity, product Label ................................................................................................... 8
5.1 Radio equipment authorization to FCC in USA ................................................................................... 8
5.2 Radio equipment authorization to RSS-210 in Canada ...................................................................... 8
6 Regulatory Information ............................................................................................................................... 9
6.1 USA: ..................................................................................................................................................... 9
6.2 Kanada:................................................................................................................................................ 9
6.3 Taiwan ................................................................................................................................................. 9
7 Location of product label .......................................................................................................................... 10
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 3 of 10 11.03.2022
Huf Hülsbeck & Fürst
1 General description of the door-handle
The Door-Handle HUF13145 with NFC is equipped with sensors that enable users of a car with passive
entry system to lock/unlock the doors by carrying the key fob or an authorised NFC-Device with them.
NFC-Reader:
When an NFC-Device approaches to the NFC-Antenna, the door handle sends a signal to the electronic
control unit to initiate the authorisation sequence for unlocking or locking the door.
NFC detection
area
Hall (grip deflection)
SPOT (Comfort Close)
BS (Close)
NS (Approach Open)
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 4 of 10 11.03.2022
Huf Hülsbeck & Fürst
2 Communication Interfaces
Following picture shows a simplified diagram of the system.
The door-handle communicates with the Electronic Control Unit (ECU) by using one-wire interface and
with the NFC-Device by using Near Field Communication.
Communication with the NFC-Device
Near Field Communication between the door-handle and the NFC-Device.
Communication with the ECU
Bidirectional communication with the ECU during the NFC-authorisation sequence
NFC Device
Door-Handle
(driver’s door)
Electronic with NFC ECU
1
2
1
2
ECU
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 5 of 10 11.03.2022
Huf Hülsbeck & Fürst
3 Block diagram
Overview over all Sensors
2,5V-Regulator
IC100
T601 KG/EDS-TX
Door-Handle
1
2
3
EDS-RX
µC
5V-Regulator
IC101
IC202
R607
NFC Reader
DC
Supply
Data
Ground
AS3915-AQFT
IC401
SPI Filter Antenna
(13.56MHz)
27.12MHz
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 6 of 10 11.03.2022
Huf Hülsbeck & Fürst
4 Technical data
4.1 Electrical characteristics
min.
typ.
max.
Unit
Voltage
8.5
12
16
V
Temperature
-40
+85
°C
Quiescent current: Iquies ≤ 400μA for
Active current: Iactive ≤ 250mA
4.2 Connector definition
Counterpart: TE Nr. 1-2236656-1 6pol Bu-Geh Daimler
4.3 General NFC specification
Standards: ISO 14443-A
Communication role: Proximity Coupling Device (PCD)
Anti-collision support: Yes
Communication range: ≤ 2cm approx. (dependent on Proximity Integrated Circuit Card (PICC))
Type of NFC antenna: PCB Loop antenna
NFC Frequency rate: 13.56 MHz ± 7 kHz
Data rate: 106 kb/s
Type of modulation: ISO 14443-A → Load modulation OOK
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 7 of 10 11.03.2022
Huf Hülsbeck & Fürst
Test Modes NFC Field-On: The Door-Handle produces a high frequency
electromagnetic field (13.56 MHz)
NFC-A Frames: The Door-Handle produces frames of high frequency
electromagnetic field (13.56 MHz) and modulates its amplitude according
to ISO 14443-A in order to transmit data. The Inter-frame space is 5ms
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 8 of 10 11.03.2022
Huf Hülsbeck & Fürst
5 Declaration of Conformity, product Label
5.1 Radio equipment authorization to FCC in USA
FCC ID: YGOHUF13145
The transmitter will be supplied as an original equipment device to the car manufacturer.
According to 47 CFR 15.19 (labelling requirements) the car manufacturer will print the following text in
the appropriate User’s Manual of the car:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Usually this is followed by the following FCC caution:
Any changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
5.2 Radio equipment authorization to RSS-210 in Canada
IC: 4008C- HUF13145
The transmitter will be supplied as an original equipment device to the car manufacturer.
According to RSS-210 (labelling requirements) the car manufacturer will print the following text in the
appropriate User’s Manual of the car:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, mêmesi le brouillage
est susceptible d'en compromettre le fonctionnement.
Usually this is followed by the following RSS caution:
Any changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 9 of 10 11.03.2022
Huf Hülsbeck & Fürst
6 Regulatory Information
6.1 USA:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Any changes or modification not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
6.2 Kanada:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, mêmesi le brouillage est
susceptible d'en compromettre le fonctionnement.
Any changes or modification not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
6.3 Taiwan
「取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更
頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安
全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續
使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功
6.4 South Korea
Class A decvice: 이 기기는 업무용(A급) 전자파적합기기로서 판 매자 또는 사용자는 이 점을
주의하시기 바라 며, 가정외의 지역에서 사용하는 것을 목적으 로 합니다.
Technical Description and User’s Manual of the HUF14016 Door-Handle with NFC
Page 10 of 10 11.03.2022
Huf Hülsbeck & Fürst
7 Location of product label
The labelling with radio certification marks, the product model and the manufacturer logo, country code
and control identification data can be found at the door-handle.
Position of the labelling is on the back side of the NFC Module:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Huf 3145 Door Handle Manuel utilisateur

3145 Door Handle
Marque
Huf
Modèle
3145 Door Handle
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents