Asian Power devices WA-36A12S Guide d'installation

Catégorie
Lecteurs de disques optiques
Taper
Guide d'installation
Installation
NOTES
NOTES
Make sure you have a personal computer with any open USB port before
connecting the drive to your computer.
Power for all device should be turn off before attaching the cables.
Please do not connect the AC adapter and USB cable by any means other than specied above.
“Use only power supplies listed in the user instructions” or
“For applicable power supplies see user instructions”.
Adapter information
- Model name: WA-36A12S
- Manufacturer: Asian Power devices Inc.
- Rating: 36 W (3.0 A, 12 V)
The appliance is not intended for use by young children or inrm persons without supervision.
Young children should be supervised to ensure that they do not play with appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be
positioned so that it is not subject to splashing or ingress of moisture.
Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body
from electrostatic.
Connecting to computer
Connect the drive to the computer as shown in gure.
Connect the USB cable to the External Writer.
Connect the other end of the USB cable to your computer.
Connect the AC adapter plug to the power connector at
the rear of the drive. Attach the AC adapter to the AC
wall outlet.
Make sure the power switch is turned on.
When the computer is ready, conrm that the drive is
detected.
And then, insert the supplied software CD into the
External Writer and install the software.
To AC wall outlet.
USB cable
Hardware Installation
Location and function of controls
This following is the general gure of the design of the drive.
The drives appearance and specications may change without prior notice.
Remember - AC adapter must be connected.
Make sure the power is turned on.
Loading a disc
1. Touch the Eject Button to open the Disc tray.
2. Load a disc. (Label facing up.)
3. Close the Disc tray.
Ejecting a disc
1. Touch the Open/Close Button to open the Disc tray.
2. Removing the disc.
3. Close the Disc tray after removing the disc.
This drive has a feature that allows the CD to be ejected manually in case
of a drive failure or a power outage.
NOTE: Don’t use this feature except in an emergency.
1) Turn the power switch OFF.
2) Poke a ne-tipped object (such as a straightened heavy duty paper clip)
into the small hole above the eject button. The front door will pop open
and the disk tray will come partway out.
3) Pull the front door to open it all the way, then grip the disc tray
between thumb and forenger and gently pull it straight out.
* If you cannot get a good grip on the disc tray with your ngers, use a
steel binder clip or spring clamp to pull it out.
NOTE: Use this feature for an emergency
purpose only. Using it excessively will
cause malfunction.
Front View
Rear View
1. Disc Tray
2. Drive activity indicator (LED)
3. Emergency Eject Hole
4. Open/Close button
1. USB Connector
This connector is used to connect to the USB cable.
2. Power Switch
Use this switch to turn the drive on and off.
3. Power Connector
This connector is used to connect to the AC Power adapter cord.
1
2 43
3
NOTES
1
2
1
2 43
3
NOTES
1
2
Loading and ejecting a disc Emergency Eject
System requirements
To install of your product, please read this guide manual carefully and completely.
Quick Set-up Guide
External Blu-ray / DVD Writer
BE16
Operating Environment
This unit can be operated in the system environment explained here.
Playing Blu-ray Movies *NOTICE*
Due to copyright protection features, certain requirements must be met in order to playback BD movies on a
computer. When using digital video connections, the monitor and graphics card must support High-bandwidth
Digital Content Protection (HDCP). Note that most monitors and graphics cards currently don’t support HDCP.
But, most High Denition TVs and multimedia monitors do support HDCP. Refer to the PC or graphic card
maker’s web site to see if your card supports HDCP. Some video cards that currently support HDCP:
- Blu-ray Disc playback: Intel G45, ATI Radeon HD 2400, NVIDIA Geforce 7600GT or above
- 3D playback: Intel G45, ATI Radeon HD 2400, NVIDIA Geforce 8800GT or above
* When using ATI RadeonTM HD 1000 Series Graphic Card, some BLURAY movie title can not be played on
Windows7 normally. It caused by giving up supporting the device driver of this Graphic Card by ATI Radeon
TM
.
For more information, Please contact to customer service center or website of ATI Radeon
TM
.
*
1
Graphic card driver shall meet AACS compliance criteria. Please consult your graphics card vendor for proper
driver solution.
*
2
HDCP (High Bandwidth Digital Content Protection): Required to view pre-recoded Blu-ray Discs which are
copy protected.
Specications
Software
Install the appropriate CD Recording Authoring Software before using this unit.
* Please uninstall any previous CD burning software you may have loaded on your PC in order to prevent
possible compatibility issues.
Once you have installed the application software, you may (if you wish) begin to reinstall previous software,
taking note for errors. We recommend using the drive with the latest software as some problems encountered
when using the drive can be solved by updating the software.
Worldwide corporate site : http://www.LG.com
*
1
The disc of the cartridge type is not supported.
*
2
BD-RE: The disc of version 1.0 is not supported.
*
3
There might be some cases when this drive can not satisfy the best performance depending on the conditions
of the disc, the drive, and the recording format.
- The maximum data transfer rate varies according to the performance capabilities of the PC.
- For the sake of periodic improvements, specications and appearance are subject to change without notice.
- We have taken all possible measures to assure the quality of our products, but we cannot be responsible for
the consequences if defect occurs.
* Initial installation of Tool CD requires internet access for Windows Vista users.
* Compatibility problem in write/read function may occur with media depending on the media manufacturing quality.
* There may be some cases when motion picture playback is not smooth depending on bit rate.
* Please visit http://www.m-disc.com to learn more about the M-DISC
TM
.
• CPU : Intel Core 2 Duo E6750 (2.66 GHz), AMD Phenom 9450 (2.10 GHz) or above.
• O/S : Windows 10/ 8.1/ 8/ 7/ Vista(32 bit, 64 bit)/ XP SP3.
• RAM : 2 GB or more
• HDD : Needed free space for Blu-ray Disc authoring (BD-R SL/DL: 60 GB,
BD-R/RE XL (3 Layer): 100 GB, BD-R XL (4 Layer): 128 GB)
USB 2.0 or 3.0
BD-R SL : Sony.
BD-R DL : Panasonic.
BD-R XL (3 Layer)/ XL (4 Layer) : Mitsubishi Kagaku Media / Sony.
BD-R SL LTH : Taiyo Yuden.
BD-RE SL : Mitsubishi Kagaku Media, Verbatim, Sony.
BD-RE DL/XL (3 Layer) : Mitsubishi Kagaku Media / Sony.
DVD-R :Mitsubishi Kagaku Media.
DVD-RW : JVC, Mitsubishi Kagaku Media, Verbatim.
DVD+R : Mitsubishi Kagaku Media.
DVD+RW : Mitsubishi Kagaku Media, Verbatim.
DVD
±
R DL : Mitsubishi Kagaku Media.
DVD-RAM : Panasonic.
M-Disc (DVD+R SL, BD-R SL) : Millenniata
CD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden.
CD-RW : LG, Mitsubishi Kagaku Media, Verbatim.
System
requirements
Interface
Recommended
media
manufacturer
Digital
Interface
DVI or HDMI
HDCP
Compliant
Driver
AACS *
1
Compliant
Interface
DVI or HDMI
HDCP *
2
Compliant
Resolution
1024x768
or more
(
Recommended
: 1920x1080)
Graphic Card Monitor
General Supported Discs*
1
BD-ROM (SL/DL), BD-R (SL/DL/TL/QL), BD-R LTH, BD-RE*
2
(SL/
DL/TL), DVD-ROM (SL/DL), DVD-R (SL/DL), DVD-RW, DVD-RAM,
M-DISC (DVD+R SL, BD-R SL), DVD+R (SL/DL), DVD+RW,
CD-ROM Mode-1, Mode-2 data disc, CD-ROM XA, CD-I,
Photo-CD Multi-Session, Video CD, CD-Audio Disc, Mixed mode
CD-ROM disc (data and audio), CD-Extra, CD-Text, CD-R, CD-RW
Interface USB 2.0 and USB 3.0
Write/Read
speed*
3
Media Write Read
BD-ROM
(SL/DL)
USB 3.0 - 12x/ 8x max.
USB 2.0 - 6x max.
BD-R SL USB 3.0 2x, 4x, 6x, 8x, 10x,12x, 16x 12x max.
USB 2.0 2x, 4x, 6x 6x max.
BD-R DL USB 3.0 2x, 4x, 6x, 8x, 10x, 12x 8x max.
USB 2.0 2x, 4x, 6x 6x max.
BD-R TL USB 3.0 2x, 4x , 6x , 8x 6x max.
USB 2.0 2x, 4x , 6x
BD-R QL 2x, 4x , 6x 6x max.
BD-R SL LTH USB 3.0 2x, 4x , 6x, 8x 8x max.
USB 2.0 2x, 4x , 6x 6x max.
BD-R SL
(M-DISC)
USB 3.0 4x 12x max.
USB 2.0 4x 6x max.
BD-RE (SL/DL) USB 3.0 2x 10x/ 6x max.
USB 2.0 2x 6x max.
BD-RE TL 2x 4x max.
DVD-ROM (SL/DL) - 16x/ 12x max.
DVD-R (SL/DL)
2x, 4x, 8x, 16x/ 4x, 8x
16x/ 12x max.
DVD-RW 2x, 4x, 6x 12x max.
DVD-RAM 2x, 3x, 5x 5x max.
DVD+R (SL/DL)
4x, 8x, 16x/ 2.4x 4x, 8x
16x/ 12x max.
DVD+R SL(M-DISC)
4x
12x max.
DVD+RW 4x, 6x, 8x 12x max.
CD-R 8x, 16x, 24x, 32x, 40x, 48x 48x max.
CD-RW 4x, 10x, 16x, 24x 40x max.
CD-ROM - 48x max.
CD-DA - 40x max.
Performance Data transfer rate
Sustained
BD : 71.92 MB/s (16x max.)
DVD : 22.16 MB/s (16x max.)
CD : 7.2 MB/s (48x max.)
Average Access
(1/3 stroke)
BD-ROM:180 ms (Typical)
DVD-ROM: 160 ms (Typical)
DVD-RAM: 180 ms (Typical)
CD-ROM: 150 ms (Typical)
Buffer capacity 4 Mbytes
MTBF 100,000 Power On Hours
Environmental
Level
When operating Temperature: 5 °C to 40 °C Humidity: 15 % to 80 %
When not operating Temperature: -30 °C to 60 °C Humidity: 10 % to 90 %
Electrical Power DC 12 V
Safety Instructions
. CAUTION : The laser used in the Writer can damage your eyes.
Do not attempt to open the cover. To reduce the risk of electric shock, do not remove the
cover (or back). There are no user-serviceable parts inside. Refer servicing to qualied
service personnel. Use of controls or performance of procedures other than those specied
herein may result in hazardous radiation exposure.
. WARNING : To reduce the risk of re or electric shock, do not expose this appliance to rain
or moisture.
FCC COMPLIANCE STATEMENT
Note : This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio ortelevision reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an Authorized Service Center for help.
FCC WARNING
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This product is for use only with UL listed personal computers that have installation
instructions detailing user-installation of card cage accessory.
WARNING: This product contains chemicals known to the State of California to cause birth
defects or other reproductive harm. Wash hands after handling.
. PRECAUCION : El láser utilizado en la unidad puede dañar sus ojos. No intente abrir la
tapa. Para reducir el riesgo de descarga eléctrica, no quite la tapa (ni la parte posterior).
No hay piezas internas que deba mantener el usuario. El servicio de mantenimiento debe
efectuarlo personal técnico cualicado. El uso de controles o la ejecución de procedimientos
distintos de los especicados en este manual pueden ser causa de exposición a radiación
peligrosa.
. ADVERTENCIA : Para reducir el riesgo de fuego o descarga eléctrica, no exponga este
aparato a la lluvia ni a la humedad.
. ATTENTION : Le faisceau laser utilisé dans ce graveur est dangereux pour les yeux.
Ne pas tenter d’ouvrir le couvercle. Ne déposer ni la façade, ni le panneau arrière (risque
d’électrocution). Aucun élément interne n’est réparable par l’utilisateur. L’utilisation de
commandes ainsi que l’exécution de procédures autres que celles spéciées dans le présent
guide risque de provoquer une dangereuse exposition aux radiations.
. AVERTISSEMENT : Ne pas exposer ce matériel à la pluie ou à l’humidité (risques d’incendie
et d’électrocution).
CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO THE BEAM.
ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. UNDGÅ
UDSÆTTELSE FOR STRÅLING.
ADVARSEL : KLASSE 3B SYNLING OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPENS. UNNGÅ
EKSPONERING FOR STRÅLEN.
VARNING : KLASSE 3B SYNLING OCH OSYNLIG LASERSTRÅLNING NÄR DENNAL DEL ÄR
ÖPPNAD. STRÅLEN ÄR FARLIG.
VARO! : KURSSI 3B NÄKYVÄ JA NÄKYMÄTÖN AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE.
ÄLÄ KATSO SÄTEESEN.
Z
Microsoft® and Windows® are trademarks registered in the United States and other countries
by the Microsoft Corporation.
Z
The company names and product names written in this manual are trademarks or registered
trademarks of the respective companies.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASE 1 PRODUCTO LÁSER
CLASSE 1 PRODOTTO LASER
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Model : BE16NU50, BE16NU60
Responsible Party : Hitachi-LG Data Storage, Austin FA Center
Address : 11801 Stonehollow Dr. Suite 125 Austin, TX 78758
Telephone Number : (512) 832-8082
CUSTOMER ASSISTANCE NUMBERS / INFORMATION D’AIDE À LA
CLIENTÈLE / SERVIÇO DE ATENDIMENTO AO CONSUMIDOR
Call 1-800-243-0000 and choose the appropriate prompt.
(Mon. ~ Fri 10:00 am to 7:00 pm PST)
http://www.lg.com/us
USA
Canada
Brazil
Access our web-site at: www.LG.ca (Service Option) or
Call 1-888-LG-CANADA (542 2623)
Press the appropriate menu option, have your product
model & serial numbers & your postal code ready.
Aller au site Internet : www.LG.ca (option service)
ou téléphoner au 1,888,LG,CANADA (542.2623).
Presser l’option du menu approprier, et avoir les numéros
de modèle et de série et votre code postal sous la main.
4004 5400
* 0800 707 5454
Capitais e Regiões
Metropolitanas
Demais
Localidades
* Somente chamaas originadas de telefone fixo
W W W . L G E . C O M . B R
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Asian Power devices WA-36A12S Guide d'installation

Catégorie
Lecteurs de disques optiques
Taper
Guide d'installation

dans d''autres langues