VTech VSP608 Guide de démarrage rapide

Catégorie
Téléphones
Taper
Guide de démarrage rapide
ErisTerminal
®
SIP DECT Cordless Deskset
VSP608
Quick Start Guide
LOWER
VSP608
2
Important Safety Information
This symbol is to alert you to important operating or servicing
instructions that may appear on the product or in this user’s manual.
Always follow basic safety precautions when using this product to
reduce the risk of injury, re, or electric shock.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of re, electric shock and injury, including the following:
1. This product should be installed by a qualied technician.
2. This product should only be connected to the host equipment and never
directly to the network such as Public Switch Telephone Network (PSTN) or
Plain Old Telephone Services (POTS).
3. Read and understand all instructions.
4. Follow all warnings and instructions marked on the product.
5. Unplug this product from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
6. Do not use this product near water such as near a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.
7. Do not place this product on an unstable table, shelf, stand or other unstable
surfaces.
8. Slots and openings in the back or bottom of the handset are provided for
ventilation. To protect them from overheating, these openings must not be
blocked by placing the product on a soft surface such as a bed, sofa or rug.
This product should never be placed near or over a radiator or heat register.
This product should not be placed in any area where proper ventilation is not
provided.
9. This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supplied at the
premises, consult your dealer or local power company.
10. Do not allow anything to rest on the power cord. Do not install this product
where the cord may be walked on.
11. Never push objects of any kind into this product through the slots in the
handset because they may touch dangerous voltage points or create a short
circuit. Never spill liquid of any kind on the product.
3
12. To reduce the risk of electric shock, do not disassemble this product, but take
it to an authorized service facility. Opening or removing parts of the handset
other than specied access doors may expose you to dangerous voltages or
other risks. Incorrect reassembling can cause electric shock when the product
is subsequently used.
13. Do not overload wall outlets and extension cords.
14. Unplug this product from the wall outlet and refer servicing to an authorized
service facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operation instructions. Improper adjustment of other controls may
result in damage and often requires extensive work by an authorized
technician to restore the product to normal operation.
E. If the product has been dropped and the telephone base and/or
handset has been damaged.
F. If the product exhibits a distinct change in performance.
15. Avoid using a telephone (other than cordless) during an electrical storm.
There is a remote risk of electric shock from lightning.
16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under
certain circumstances, a spark may be created when the adapter is plugged
into the power outlet, or when the handset is replaced in its cradle. This is a
common event associated with the closing of any electrical circuit. The user
should not plug the phone into a power outlet, and should not put a charged
handset into the cradle, if the phone is located in an environment containing
concentrations of ammable or ame-supporting gases, unless there is
adequate ventilation. A spark in such an environment could create a re or
explosion. Such environments might include: medical use of oxygen without
adequate ventilation; industrial gases (cleaning solvents; gasoline vapors;
etc.); a leak of natural gas; etc.
17. Only put the handset of your telephone next to your ear when it is in normal
talk mode.
18. The power adapters are intended to be correctly oriented in a vertical or oor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
19. Use only the power cord indicated in this manual.
Power adapter rating: 6.0 Vdc @ 600 mA
4
20. For pluggable equipment, the socket-outlet shall be installed near the equipment
and shall be easily accessible.
21. In wall mounting position, make sure to mount the telephone base on the wall
by aligning the eyelets with the mounting studs of the wall plate. Then slide the
telephone base down on both mounting studs until it locks into place. Refer to
the full installation instructions in the User Guide.
22. CAUTION: Keep small metallic objects such as pins and staples away from the
handset receiver.
SAVE THESE INSTRUCTIONS
5
For cUL compliance only
Mesures de sécurité importantes
Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien
pouvant apparaître dans ce guide d’utilisation. Respectez toujours les mesures de
sécurité et de sécurité de base lorsque vous utilisez ce produit, an de réduire les
risques de blessures, d’incendie, ou d’électrocution.
Mesures de sécurité importantes
An de réduire les risques d’incendie, de blessures corporelles ou d’électrocution,
suivez toujours ces mesures préventives de base lorsque vous utilisez votre
téléphone :
1. Cet appareil doit être installé par un technicien qualié.
2. Cet appareil doit être branché à un équipement hôte et jamais branché à un
réseau, tel qu’un réseau PSTN publique ou un réseau téléphonique standard
(POTS).
3. Lisez et comprenez bien toutes les instructions.
4. Observez toutes les instructions et mises en garde inscrites sur l’appareil.
5. Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez pas
de nettoyeurs liquides ni en aérosol. N’utilisez qu’un chiffon doux et légèrement
humecté.
6. N’utilisez pas ce produit près de l’eau, tel que près d’un bain, d’un lavabo, d’un
évier de cuisine, d’un bac de lavage ou d’une piscine, ou dans un sous-sol
humide ou sous la douche.
7. Ne déposez pas ce téléphone sur un chariot, support ou table chancelants.
L’appareil pourrait tomber et être sérieusement endommagé.
8. Le boîtier de l’appareil est doté de fentes et d’ouvertures d’aération situées
à l’arrière ou en dessous. An d’empêcher la surchauffe, ces ouvertures ne
doivent pas être obstruées en plaçant l’appareil sur un lit, divan, tapis ou autre
surface similaires. Ne placez pas cet appareil à proximité d’un élément de
chauffage ni d’une plinthe électrique. De plus, ne l’installez pas dans une unité
murale ou un cabinet fermé qui ne possède pas d’aération adéquate.
9. Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur les
étiquettes de l’appareil. Si vous ne connaissez pas le voltage de votre maison,
consultez votre marchand ou votre fournisseur d’électricité.
10. Ne déposez rien sur le cordon d’alimentation. Installez cet appareil dans
un endroit sécuritaire, là où personne ne pourra trébucher sur la ligne
d’alimentation ni le cordon téléphonique modulaire.
11. N’insérez jamais d’objets à travers les fentes et ouvertures de cet appareil, car
6
ils pourraient toucher à des points de tension dangereux ou court-circuiter des
pièces, ce qui constituerait un risque d’incendie ou d’électrocution. N’échappez
pas de liquides dans l’appareil.
12. An de réduire les risques d’électrocution, ne démontez pas l’appareil, mais
apportez-le plutôt à un centre de service qualié s’il doit être réparé. En
enlevant le couvercle, vous vous exposez à des tensions dangereuses ou
autres dangers similaires. Un remontage inadéquat peut être à l’origine d’une
électrocution lors d’une utilisation ultérieure de l’appareil.
13. Ne surchargez pas les prises de courant ni les rallonges électriques, car ceci
peut constituer un risque d’incendie ou d’électrocution.
14. Débranchez cet appareil de la prise de courant et communiquez avec le
département de service à la clientèle de VTech dans les cas suivants:
A. Lorsque le cordon d’alimentation est endommagé ou écorché.
B. Si du liquide a été échappé dans l’appareil.
C. Si l’appareil a été exposé à une source d’humidité telle que la pluie ou l’eau.
D. Si l’appareil ne fonctionne pas normalement en suivant les directives du
guide. N’ajustez que les commandes couvertes dans le guide d’utilisation,
car un mauvais réglage de celles-ci peut être à l’origine de dommages, ce
qui nécessiterait des réparations considérables pour remettre l’appareil à
son état de fonctionnement normal.
E. Si l’appareil a été échappé ou son boîtier, endommagé.
F. Si le produit afche une nette diminution de sa performance.
15. Évitez d’utiliser un téléphone (autre qu’un sans l) pendant un orage. Les
éclairs peuvent être à l’origine d’une électrocution.
16. N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de
celle-ci. Sous certaines circonstances, une inteincelle pourrait survenir lorsque
l’adaptateur est branché à une prise de courant, ou lorsque le combiné
est déposé sur le combiné. Ceci est un événement commun associé avec
la fermeture d’un circuit électrique. L’utilisateur ne devrait pas brancher le
téléphone dans une prise de courant, et ne devrait pas déposer le combiné
chargé sur le socle, si le téléphone se trouve dans un environnement ou la
concentration de gaz inammables, sans ventilation adéquate. Une étincelle
dans ces endroits pourrait provoquer un incendie ou une explosion. Ces
environnements pourraient être l’utilisation médicale de l’oxygène sans
ventilation adéquate; le gaz industriel (dissolvants, vapeurs d’essence, etc.);
une fuite de gaz naturel, etc.
17. Placez uniquement le combiné de votre appareil près de votre oreille lorsqu’il
est en mode de conversation normal.
18. Les adaptateurs sont conçus pour être orientés en position verticale ou en
position horizontale sur le plancher.
7
19. N’utilisez que cordon d’alimentation et les piles indiquées dans ce guide
d’utilisation.
Note de l’adaptateur: 6.0 Vdc @ 600 mA
20. Pour les PRODUITS À BRANCHER À UNE PRISE DE COURANT, la prise
de courant doit être installée près du produit, an d’assurer une accessibilité
sécuritaire à la prise de courant.
21. En position de montage mural, assurez-vous de monter le socle du téléphone
sur le mur en alignant les oeillets avec les goujons de xation de la plaque
murale. Ensuite, faites glisser le socle vers le bas sur les deux goujons de
xation jusqu’à ce qu’il se verrouille en place. Reportez-vous aux instructions
complètes dans la section Installation dans ce guide d’utilisation.
22. MISE EN GARDE : Éloignez les petits objets métalliques tels que les broches
de l’écouteur du combiné.
CONSERVEZ CES INSTRUCTIONS
8
Compliance
FCC part 15
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at the
user’s expense.
Privacy of communications may not be ensured when using this phone.
Warning: Changes or modications to this equipment not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment.
Caution: To maintain the compliance with the FCC’s RF exposure guideline, place
the base unit at least 20 cm from nearby persons.
For body-worn operation, this handset has been tested and meets the FCC RF
exposure guidelines when used with the accessories supplied or designated for
this product. Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
This Class A digital apparatus complies with Canadian requirements:
CAN ICES-3 (A)/NMB-3(A).
Cet appareil numérique de la classe A est conforme à la norme CAN ICES-3 (A)/
NMB-3(A) du Canada.
This device complies with Industry Canada license-exempt RSS standard(s).
Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation of the device.
Privacy of communications may not be ensured when using this telephone.
The term ‘’IC:‘’ before the certication/registration number only signies that the
Industry Canada technical specications were met.
This product meets the applicable Innovation, Science and Economic Development
Canada technical specications.
9
Parts Checklist
Your telephone package contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.
About this Guide
This quick start guide provides a reference for the external features of the VSP608
SIP DECT cordless deskset and installation instructions.
The VSP608 SIP DECT cordless deskset is for use with the VSP600 SIP DECT
base station. Please refer to the VSP600/VSP608 SIP DECT Base Station and
Cordless Deskset User Guide for complete operation instructions. You can
download user guides from businessphones.vtech.com.
For customer service or product information, visit our website at
businessphones.vtech.com or call 1 (888) 370-2006.
Quick Start Guide Power adapter Directory card
Deskset base
Deskset stand
Handset and cord
Backup battery
Quick start guide
VSP608
10
Quick Reference Guide
Deskset overview
MESSAGE WAITING
Flashes when a line has a new
voice message.
LINE
Displays the Dialing Line menu.
MESSAGE
Displays the Message menu.
HOLD
Puts the active call on hold.
TRANSFER
Starts the transfer process.
FLASH
Press to answer a call after a call
waiting alert.
CONFERENCE
Starts the conference process.
NAVIGATION KEY
While in menus, press q or p to
scroll through the menu, highlight
items or change settings. While
entering names, numbers or other
text, press t or u to move the
cursor left or right.
DIRECTORY
Press to view
directory information.
CALL HISTORY
Press to view caller
ID information.
DND
Press to enter do-not-
disturb mode.
REDIAL
Press to view list of
previously dialed
numbers.
MENU/FUNC.
Press to display the
deskset menu.
DELETE
Press to delete a
selected item.
SELECT
Press to select a menu
item or save a setting.
CANCEL
While in a menu, press
to cancel an operation
and exit the menu.
LOWER
VSP608
LOWER
VSP608
11
Quick Reference Guide
Deskset overview
SPEED DIAL KEYS
Press to dial the desired speed dial
number.
LOWER
When assigning or dialing a speed
dial number, press to switch to
the lower lcation (the second 16
locations) of a speed dial key.
MIC
INTERCOM
Press to display the intercom list.
INT. ALL
Press to start an intercom call to all other
cordless desksets and handsets.
MUTE
During a call, press to mute the microphone.
HEADSET
When a corded headset is connected, press
to make, answer or hang up a call.
VOL pq
During a call, press to adjust the
listening volume.
During message playback, press to
adjust the playback volume.
When the phone is idle, press to
adjust the ringer volume.
SPEAKER
Press to turn the speakerphone on or off.
LOWER
VSP608
12
Deskset Installation
This section assumes that your network infrastructure is established and that your
IP PBX phone service has been ordered and congured for your location.
Deskset installation involves both the backup battery and the deskset. The deskset
is powered using the supplied power adapter. The deskset can be placed on a at
surface or mounted on a wall.
Avoid placing the deskset too close to:
Communication devices such as television sets, DVD players, or other cordless
telephones
Excessive heat sources
Noise sources such as a window with trafc outside, motors, microwave ovens,
refrigerators, or uorescent lighting
Excessive dust sources such as a workshop or garage
Excessive moisture
Extremely low temperature
Mechanical vibration or shock such as on top of a washing machine or work bench
Installing the backup battery
Install the backup battery as shown below. In the event of a power failure, the
charged backup battery allows the deskset to operate. The backup battery will be
charged when you connect the AC power adapter to a wall outlet not controlled by a
wall switch.
1. Press down on the tab to open the battery compartment cover.
13
2. Place the battery in the compartment. Make sure the supplied battery with the
label THIS SIDE UP faces up, as indicated.
3. Align the cover at against the battery compartment, then press down until it
clicks into place.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
(model BT266342). To order a replacement battery, visit our website at
businessphones.vtech.com or call 1 (888) 370-2006.
If you do not use the deskset for a long time, disconnect and remove the battery
to prevent possible leakage.
Battery charging
Once you have installed the battery, the screen indicates the battery status (see
the table below). The backup battery is fully charged after 16 hours of continuous
charging.
The following table summarizes the battery charge indicators and actions to take.
Battery indicators Battery Status Action
The screen shows Low
battery and ashes.
Battery has enough
charge to be used for a
short time.
Charge without
interruption (at least 30
minutes).
Full battery icon ( )
appears.
Battery is charged. To keep the battery
charged, place it in the
charger when not in use.
Battery Pack
BT166342/BT263342
2.4V 300mAh Ni-MH
WARNING:DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA GY1224
Battery Pack
BT166342/BT263342
2.4V 300mAh Ni-MH
WARNING:DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA GY1224
14
Installing the deskset
1. Install the mounting bracket for tabletop use.
Low tabletop position: Insert the xed tabs of the mounting bracket into slots
A
and
B
. Press the exible tabs into slots
C
and
D
until they click into place.
High tabletop position: Insert the xed tabs of the mounting bracket into slots
A
and
B
. Press the exible tabs into slots
C
and
D
until they click into place.
C D
A B
B A
CD
Low tabletop position
D
B
B A
CD
High tabletop position
D
B
15
2. Connect the coiled handset and the power cord to the deskset.
IMPORTANT INFORMATION
1. Use only the power adapter supplied with this product. To order a replacement
power adapter, visit our website at
businessphones.vtech.com or call 1 (888) 370-2006.
2. The power adapter is intended to be correctly oriented in a vertical or oor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Plug the large end of the
power adapter into a power
outlet not controlled by a
wall switch.
Raise the antenna for
optimum wireless range
and performance.
Plug the small end of the
power adapter into the
power jack at the bottom of
the deskset.
Route the power adapter
cord through the slot at the
bottom of the deskset.
Plug the end of the
coiled handset cord into
the jack at the bottom of
the deskset.
16
Wall mounting the deskset
The deskset is ready for tabletop use. If you want to mount the deskset on a wall,
make sure you rst unplug the power adapter from the electrical outlet.
To mount the deskset on the wall:
1. Place your corded handset aside. Use a coin to rotate the handset tab 180
degrees. The protruding edge holds the corded handset when the deskset is
mounted on the wall.
2. Press in the direction indicated by the arrows to release and remove the
mounting bracket from the deskset.
3. Place the corded handset back to the deskset. Plug the small end of the power
adapter cord into the power jack on the back of the deskset.
4. Align the wall mounting holes on the back of the deskset with the tabs of the
standard wall plate. Push the deskset down until it clicks securely in place.
5. Plug the large end of the power adapter into an electrical outlet not controlled by
a wall switch.
Protruding edge
Handset tab
Low tabletop position
High tabletop position
17
Adding a corded headset
You can use this deskset hands-free when you install any industry-standard 2.5 mm
corded telephone headset (purchased separately).
Registering the deskset to the base
The deskset must be registered to the base station in order to make and receive calls.
To register the deskset:
1. Make sure both the deskset and the base station is connected to power.
2. On the base station, press the HANDSET LOCATOR button for at least four
seconds, then release the button. Both LEDs on the
base station begin to ash slowly.
3. Press the # key on the deskset to begin registration. The
process takes up to 10 seconds to complete.
When the rst deskset registers, it beeps and the screen
displays HANDSET n (the number n depends on how many devices are already
registered to the base).The deskset is ready to use.
If the deskset fails to register, it displays Registration failed. Try again. Wait for a
few seconds and repeat the registration procedure.
Deregistering the deskset
Before using the deskset with a different base station, you must deregister the
deskset from the base station to which it is currently registered.
To deregister the deskset:
1. Press MENU on the deskset. The Main Menu appears.
2. Press q to scroll to User settings and then press SELECT.
3. Press q to scroll to Registration and then press SELECT.
4. Press q to highlight Deregistration and then press SELECT.
The deskset screen displays a list of devices registered to the base.
Plug a 2.5 mm headset into
the HEADSET jack on the side
of the deskset.
18
5. Highlight the name of the deskset you want to deregister, and then press SELECT.
6. On the deskset, enter the System PIN and then press SELECT to begin
deregistration. The default PIN is 1592.
The deregistration process takes up to 10 seconds to complete. When the
deskset deregisters, it beeps and the screen displays Handset is deregistered,
followed by the registration instructions.
Note: The deskset enters an energy-saving charging mode after being deregistered.
All cordless telephone functions except deskset-battery charging are disabled.
Energy-saving charging mode is deactivated after the deskset registers to the base
station.
Screen icons
The following screen icons indicate your phone’s current status:
Icon Status
Indicates signal strength, from one bar (weak) to four bars (strong).
Flashes when out of range.
Indicates battery strength from 1/3 to 3/3. Flashes when empty.
The ringer is off.
Headset—audio is coming through a headset after the HEADSET key
was pressed.
Speakerphone—the speakerphone is active.
Microphone is muted.
FWD
Call Forward All is on.
DND
Do Not Disturb is on.
19
Maintenance
Taking care of your telephone
Your base station and cordless deskset contain sophisticated electronic parts,
so you must treat them with care.
Avoid rough treatment.
Place the handset down gently.
Save the original packing materials to protect your products if you ever need to
ship them.
Avoid water
You can damage your cordless telephone if it gets wet. Do not use the handset
in the rain, or handle it with wet hands. Do not install the base station and
deskset near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic
equipment. For your own safety, take caution when using electric appliances
during storms.
Cleaning your telephone
Your products have a durable plastic casing that should retain its luster for
many years. Clean it only with a soft cloth slightly dampened with water or a
mild soap.
Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when you
are wet or standing in water. If the telephone base should fall into water, DO NOT
RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD FROM THE WALL, then
pull the unit out by the unplugged cord.
Technical Specications
RF frequency band 1921.536–1928.448 MHz
Channels 5
Operating temperature 32–122 °F (0–50 °C)
Power requirements Power adapter: 6.0 Vdc @ 600 mA
Cordless Deskset: 2.4 V 750 mAh, Ni-MH battery pack
VTECH COMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon 97008.
VTech is a registered trademark of VTech Holdings Limited.
ErisTerminal
®
is a registered trademark of VTech Communications Inc.
Copyright © 2016 for VTECH COMMUNICATIONS LTD. All rights reserved.
Printed in China. Version 1.1, 06/16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

VTech VSP608 Guide de démarrage rapide

Catégorie
Téléphones
Taper
Guide de démarrage rapide

dans d''autres langues