EGO 2592347 Manuel utilisateur

OPERATOR'S MANUAL

STRING TRIMMER

ATTACHMENT

MODEL NUMBER STA1500/STA1500-FC

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

Español p. 69

Français p. 33

16-1107_EGO_STA1500_StringTrimmerAttachment_manual_NA_V1

EXCLUSIVELY FOR USE WITH

EGO POWER+ POWER HEAD

PH1400/PH1400-FC

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC2

TABLE OF CONTENTS

Safety Symbols ..........................................4

Safety Instructions ......................................5-9

Introduction .............................................9

Speciﬁcations ..........................................10

Packing List ............................................10

Description .........................................11-12

Assembly ...........................................13-16

Operation ...........................................17-22

Maintenance ........................................23-28

Troubleshooting ......................................29-30

Warranty ...........................................31-32

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 3

READ ALL INSTRUCTIONS!

READ & UNDERSTAND

OPERATOR'S MANUAL

WARNING:

Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contains chemicals known to the state of California

to cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

◾

Lead from lead-based paints

◾

Crystalline silica from bricks and cement and other masonry products, and

◾

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemicals: work in a well ventilated area, and

work with approved safety equipment, such as those dust masks that are specially

designed to ﬁlter out microscopic particles.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC4

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger.

The instructions and warnings they give are no substitutes for proper accident

prevention measures.

WARNING:

Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”

and “CAUTION” before using this tool. Failure to following all instructions listed below

may result in electric shock, ﬁre, and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

Indicates DANGER, WARNING, OR CAUTION.

May be used in conjunction with other symbols or pictographs.

WARNING!

The operation of any power tools can result in foreign

objects being thrown into your eyes, which can result in severe eye

damage. Before beginning power tool operation, always wear safety

goggles or safety glasses with side shield and a full face shield when

needed. We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields. Always use eye protection

which is marked to comply with ANSI Z87.1.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 5

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read,

understand, and follow all instructions on the machine before attempting to assemble

and operate it.

Safety Alert Indicates a potential personal injury hazard.

Read &

Understand

Operator's

Manual

To reduce the risk of injury, user must read and

understand the operator’s manual before using

this product.

Eye Protection

Always wear safety goggles or safety glasses

with side shields and a full face shield when

operating this product.

Recycle Symbols

This product uses lithium - ion (Li - ion) batteries.

Local, state, or federal laws may prohibit disposal

of batteries in ordinary trash. Consult your

local waste authority for information regarding

available recycling and/or disposal options.

IPX4

Ingress Protection

Degree

Protection from splashing water

V Volt Voltage

mm Millimeter Length or size

cm Centimeter Length or size

in. Inch Length or size

kg Kilogram Weight

lb Pound Weight

Direct Current Type or a characteristic of current

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC6

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

When using electric trimmers, basic safety precautions should

always be followed to reduce the risk of ﬁre, electric shock, and personal injury,

including the following:

READ ALL INSTRUCTIONS

DANGER!

Do not rely on the tool’s insulation against electric shock. To reduce

the risk of electrocution, never operate the tool in the vicinity of any wires or cables

which may carry electric current.

CAUTION!

Wear appropriate personal hearing protection during use. Under some

conditions and durations of use, noise from this product may contribute to hearing loss.

◾

Keep Children Away - All visitors should be kept at least 100 feet away from

work area.

◾

Avoid Dangerous Environments – Don’t use appliances on damp or wet slope.

◾

Dress Properly - Do not wear loose clothing or jewelry. They can be caught in

moving parts. Use of rubber gloves and substantial footwear is recommended

when working outdoors. Wear protective hair covering to contain long hair.

◾

Use Safety Glasses - Always use face or dust mask if operation is dusty.

◾

Use the Right Tool - Do not use the tool for any job except that for which it is

intended.

◾

Don’t Force the Trimmer - It will do the job better and with less likelihood of a

risk of injury at the rate for which it was designed.

◾

Don’t Overreach - Keep proper footing and balance at all times.

◾

Stay Alert - Watch what you are doing. Use common sense. Do not operate the

trimmer when you are tired.

◾

Do not operate the trimmer while under the inﬂuence of alcohol or drugs.

◾

Keep guards in place and in working order.

WARNING:

To reduce the risk of injury to persons, do not operate without guards

in place.

◾

Keep hands and feet away from the cutting area.

◾

Store Trimmer Indoors - When not in use the trimmer should be stored indoors in a

dry and high or locked-up place with the battery pack removed- out of reach of children.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 7

◾

Maintain Trimmer With Care - Keep the cutting attachment clean for best

performance and to reduce the risk of injury. Follow the instructions for changing

accessories. Keep the handles dry, clean, and free from oil and grease.

◾

Check Damaged Parts - Before further use of the trimmer, a guard or other

part that is damaged should be carefully checked to determine that it will operate

properly and perform its intended function. Check for alignment of moving parts,

binding of moving parts, breakage of parts, mounting, and any other condition

that may affect its operation. A guard or other part that is damaged should be

properly repaired or replaced by an authorized service center unless indicated

elsewhere in this manual.

◾

Clear the area to be cut before each use. Remove all objects such as rocks,

broken glass, nails, wire, or string that can be thrown or become entangled in the

cutting attachment. Make sure that other persons and pets are at least 100 ft.

(30.5m) away.

◾

Always hold the trimmer ﬁrmly, with both hands on the handles, while

operating. Wrap your ﬁngers and thumbs around the handles.

◾

Avoid Accidentally Starting - Don’t carry the trimmer with your ﬁnger on

the trigger.

◾

Do not operate the trimmer in gaseous or explosive atmospheres. Motors

in these appliances normally spark, and the sparks might ignite fumes.

◾

Damage to Trimmer - If you strike a foreign object with the trimmer or it

becomes entangled, stop the tool immediately, check for damage and have any

damage repaired before further operation is attempted. Do not operate with a

broken guard or spool.

◾

If the equipment should start to vibrate abnormally, stop the motor and

check immediately for the cause. Vibration is generally a warning of trouble.

A loose head may vibrate, crack, break or come off the trimmer, which may result

in serious or fatal injury. Make sure that the cutting attachment is properly ﬁxed

in position. If the head loosens after ﬁxing it in position, replace it immediately.

Never use a trimmer with a loose cutting attachment.

◾

Replace a cracked, damaged or worn-out cutting head immediately, even

if damage is limited to superﬁcial cracks. Such attachments may shatter at

high speed and cause serious or fatal injury.

◾

Check the cutting attachment at regular short intervals during operation,

or immediately if there is a noticeable change in cutting behavior.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC8

◾

When replacing the cutting line, use no more than 2.4mm nylon line;

using heavier lines than recommended by the manufacturer increases the load

on the motor and reduces its operating speed. This results in overheating and

damage to the trimmer.

◾

To reduce the risk of serious injury, never use wire or metal-reinforced

line or other material in place of the nylon cutting lines. Pieces of wire

could break off and be thrown at high speed toward the operator or bystanders.

◾

To reduce the risk of injury from loss of control, never work on a ladder

or on any other insecure support. Never hold the cutting attachment

above waist height.

◾

Do not charge the battery pack in rain, or in wet locations.

◾

Use only with the battery packs and chargers listed below:

BATTERY PACK CHARGER

BA1120, BA1120-FC, BA1400, BA1400-FC,

BA2240, BA2240-FC, BA2800, BA2800-FC,

BA4200, BA4200-FC, BA1400T, BA1400T-FC,

BA2800T, BA2800T-FC, BA4200T, BA4200T-FC,

BA5600T, BA5600T-FC

CH2100, CH2100-FC,

CH5500, CH5500-FC

◾

Use Only With The 56V Lithium-Ion Power Head PH1400/PH1400-FC.

◾

Do not dispose of the battery in a ﬁre. The cells may explode. Check with

local codes for possible special disposal instructions.

◾

Do not open or mutilate the battery. Released electrolyte is corrosive and

may cause damage to the eyes or skin. It may be toxic if swallowed.

◾

Exercise care in handling batteries in order not to short the battery with

conducting materials such as rings, bracelets, and keys. The battery or

conductor may overheat and cause burns.

◾

Replacement Parts - When servicing, use only identical EGO replacement parts.

Use of any other accessory or attachment may increase the risk of injury.

◾

Battery tools do not have to be plugged into an electrical outlet;

therefore, they are always in operating condition. Be aware of possible

hazards even when the tool is not operating. Take care when performing

maintenance or service.

◾

Remove or disconnect battery pack before servicing, cleaning or

removing material from the trimmer.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 9

◾

Do not wash with a hose; avoid getting water in motor and electrical

connections.

◾

Do not incinerate the appliance even if it is severely damaged. The

batteries can explode in a ﬁre.

◾

Do not expose a battery pack or tool to ﬁre or excessive temperature.

Exposure to ﬁre or temperature above 212 °F (100°C) may cause explosion.

◾

If situations occur that are not covered in this manual, use care and

good judgment. Contact the EGO Customer Service Center for assistance.

◾

Save these instructions. Refer to them frequently and use them to instruct

others who may use this tool. If you lend this tool to someone else, also lend

these instructions to them to prevent misuse of the product and possible injury.

SAVE THESE INSTRUCTIONS!

NOTE: SEE YOUR POWER HEAD OPERATOR’S MANUAL FOR

ADDITIONAL SPECIFIC SAFETY RULES.

INTRODUCTION

Congratulations on your selection of the STRING TRIMMER ATTACHMENT. It has been

designed, engineered and manufactured to give you the best possible dependability

and performance.

Should you experience any problem you cannot easily remedy, please contact EGO

customer service center 1-855-EGO-5656.

This manual contains important information on to the safe assembly, operation and

maintenance of your string trimmer. Read it carefully before using the string trimmer.

Keep this manual handy so you can refer to it at any time.

SERIAL NUMBER _____________________ DATE OF PURCHASE _________________

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A

SAFE PLACE FOR FUTURE REFERENCE

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC10

SPECIFICATIONS

Cutting Mechanism Bump Head

Cutting Line Type 0.095" (2.4 mm) nylon twist line

Cutting Width 15 in. (38 cm)

Recommended Operating Temperature 32°F-104°F (0°C-40°C)

Recommended Storage Temperature -4°F-158°F (-20°C-70°C)

Weight 3.51 lb. (1.59 kg)

Recommended Cutting Line

PART NAME TYPE MODEL NUMBER

Cutting Line 0.095"/2.4mm twist line (Recommended)

AL2415S

AL2450S

AL2420P

PACKING LIST

PART NAME QUANTITY

String Trimmer Attachment 1

Guard 1

Hex Wrench 1

Multi-Function Wrench 1

Operator's Manual 1

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 11

DESCRIPTION

KNOW YOUR STRING TRIMMER (Fig. 1)

The safe use of this product requires an understanding of the information on the tool and

in this operator’s manual, as well as knowledge of the project you are attempting. Before

using this product, familiarize yourself with all operating features and safety rules.

1

String-Trimmer Shaft

End Cap

Guard

Line-cutting Blade

Cutting Line

Release Tab

Trimmer Head

(Bump Head)

Multi-Function Wrench

Hex Wrench

WARNING:

Never operate the tool without the guard ﬁrmly in place. The guard

must always be on the tool to protect the user.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC12

TRIMMER HEAD (BUMP HEAD)

Stores the cutting line and releases the cutting line when the head is lightly tapped on

the ground during operation.

GUARD

Reduces the risk of injury from foreign objects ﬂung backwards toward the operator

and from contact with the cutting attachment.

LINE-CUTTING BLADE

Steel blade on the guard that maintains the cutting line at the proper length.

RELEASE TAB

Releases the spool retainer from the spool base.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 13

ASSEMBLY

WARNING:

If any parts are damaged or missing, do not operate this product

until the parts are replaced. Use of this product with damaged or missing parts could

result in serious personal injury.

WARNING:

Do not attempt to modify this product or create accessories not

recommended for use with this string trimmer. Any such alteration or modiﬁcation is

misuse and could result in a hazardous condition leading to possibly serious personal

injury.

WARNING:

Do not connect to power head until assembly is complete. Failure to

comply could result in accidental starting and possible serious personal injury.

UNPACKING

◾

This product requires assembly.

◾

Carefully remove the product and any accessories from the box. Make sure that

all items listed in the packing list are included.

WARNING:

Do not use this product if any parts on the Packing List are already

assembled to your product when you unpack it. Parts on this list are not assembled to

the product by the manufacturer and require customer installation. Use of a product

that may have been improperly assembled could result in serious personal injury.

◾

Inspect the tool carefully to make sure that no breakage or damage occurred

during shipping.

◾

Do not discard the packing material until you have carefully inspected and

satisfactorily operated the tool.

◾

If any parts are damaged or missing, please return the product to the place of

purchase.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC14

MOUNTING THE GUARD

NOTICE: Install the guard before the

attachment is connected to the power head.

WARNING:

To reduce the risk of

injury to persons, do not operate without

guards in place.

WARNING:

Always wear gloves

when mounting or replacing the guard. Be

careful of the blade on the guard and protect

your hands from being injured by the blade.

1. Loosen the two bolts in the guard

with the supplied hex wrench;

remove the bolts and spring

washers from the guard (Fig. 2).

2. Lift the trimmer head and face it

downward; align the two mounting

holes in the guard with the two

assembly holes in the base of the

shaft. Make sure that the internal surface of the guard faces towards the trimmer

head (Fig. 3).

3. Use the supplied hex wrench to lock the guard in place with the bolts.

CONNECTING THE STRING TRIMMER ATTACHMENT TO THE POWER HEAD

WARNING:

Never attach or adjust any attachment while the power head is

running or with the battery installed. Failure to stop the motor and remove the battery

may cause serious personal injury.

This string trimmer attachment is designed for use with EGO Power Head PH1400/PH1400-FC.

The string trimmer attachment connects to the power head by means of a coupler device.

1. Stop the motor and remove the battery pack.

2. Loosen the wing knob on the power-head coupler.

2

3

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 15

3. If the end cap is on the string trimmer attachment shaft, remove it and save it in a

safe place for later use. Align the arrow on the string trimmer shaft with the arrow

on the coupler (Fig. 4a) and push the string trimmer shaft into the coupler until

you hear a clear “CLICK” sound. The coupler should be positioned all the way to

the RED LINE labeled on the string trimmer shaft: the red line must be ﬂush with

the coupler edge (Fig. 4b).

4. Pull on the shaft of the string trimmer attachment to verify that it is securely locked into

the coupler. If not, rotate the string trimmer shaft from side to side in the coupler until a

clear “CLICK” sound indicates that it is engaged.

5. Tighten the wing knob securely.

WARNING:

Be certain that the wing knob is fully tightened before operating the

equipment; check it periodically for tightness during use to avoid serious personal injury.

Arrow on the Attachment Shaft

4a

Arrow on the Coupler

Shaft-Release Button

Wing Knob

Red Line

4b

Red Line

REMOVING THE ATTACHMENT FROM THE POWER HEAD

1. Stop the motor and remove the battery pack.

2. Loosen the wing knob.

3. Press the shaft-release button and, with the button depressed, pull or twist the

attachment shaft out of the coupler.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC16

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless.

Remember that a careless fraction of a second is sufﬁcient to inﬂict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shield

marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown

into your eyes and other possible serious injuries.

WARNING:

Do not use any attachments or accessories not recommended by the

manufacturer of this product. The use of attachments or accessories not recommended

can result in serious personal injury.

APPLICATIONS

You may use this product for the purpose listed below:

◾

Trimming grass and weeds from around porches, fences, and decks.

HOLDING THE STRING TRIMMER

WITH POWER HEAD (Fig. 5)

WARNING:

Dress properly to

reduce the risk of injury when operating

this tool. Do not wear loose clothing

or jewelry. Wear eye and ear/hearing

protection. Wear heavy, long pants, boots

and gloves. Do not wear short pants or

sandals or go barefoot.

Hold the string trimmer with one hand on

the rear handle and your other hand on

the front-assist handle. Keep a ﬁrm grip

with both hands while operating the tool.

The string trimmer should be held at a

comfortable position, with the rear handle

at about hip height. The trimmer head should be parallel to the ground such that it

easily contacts the material to be cut without the operator having to bend over.

5

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 17

USING THE STRING TRIMMER

WARNING:

To avoid serious personal injury, wear goggles or safety glasses at all

times when operating this unit. Wear a face mask or dust mask in dusty locations.

Clear the area to be cut before each use. Remove all objects, such as rocks, broken

glass, nails, wire, or string that can be thrown or become entangled in the cutting

attachment. Clear the area of children, bystanders, and pets. At a minimum, keep all

children, bystanders and pets at least 100 feet (30.5m) away; there still may be risk

to bystanders from thrown objects. Bystanders should be encouraged to wear eye

protection. If you are approached, stop the motor and cutting attachment immediately.

WARNING:

To prevent serious personal injury, remove the battery pack from the

tool before servicing, cleaning, changing attachments or removing material from the

unit.

Before each use check for damaged/worn parts

Check the trimmer head, guard and front-assist handle and replace any parts that are

cracked, warped, bent, or damaged in any away.

The line-cutting blade on the edge of the guard can dull over time. It is recommended

that you periodically sharpen it with a ﬁle or replace it with a new blade.

WARNING:

Always wear gloves when mounting or replacing the guard or when

sharpening or replacing the blade. Note the location of the blade on the guard and

protect your hand from injury.

Clean the trimmer after each use

See the Maintenance section for cleaning instructions.

WARNING:

Never use water for cleaning your trimmer. Avoid using solvents

when cleaning plastic parts. Most plastics are susceptible to damage from various

types of commercial solvents. Use clean clothes to remove dirt, dust, oil, grease, etc.

TO START/STOP THE TOOL

See "STARTING/STOPPING THE POWER HEAD" section in the power head PH1400/

PH1400-FC operator's manual.

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC18

Tips for best trimming results

(Fig. 6)

◾

The correct angle for the cutting

attachment is parallel to the ground.

◾

Do not force the trimmer. Allow the

very tip of the line to do the cutting

(especially along walls). Cutting with

more than the tip will reduce cutting

efﬁciency and may overload the

motor.

◾

The cutting height is determined by the distance of the cutting line from the lawn

surface.

◾

Grass over 8 inches (200 mm) should be cut by working from top to the bottom in

small increments to avoid premature line wear or motor drag.

◾

Slowly move the trimmer into and out of the area being cut, maintaining the

cutting head position at the desired cutting height. This movement can be either

a forward-backward motion or a side-to-side motion. Cutting shorter lengths

produces best results.

◾

Trim only when grass and weeds are dry.

◾

Wire and picket fences can cause extra string wear or breakage. Stone and brick

walls, curbs, and wood may wear strings rapidly.

◾

Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can

easily be damaged by the strings.

ADJUSTING CUTTING LINE

LENGTH

The trimmer head allows the operator to

release more cutting line without stopping

the motor. As line becomes frayed or

worn, additional line can be released by

lightly tapping the trimmer head on the

ground while operating the trimmer

(Fig. 7).

7

6

Best cutting

area

Rotation

direction

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC 19

WARNING:

Do not remove or alter the line-cutting blade assembly. Excessive

line length will cause the motor to overheat and may result in serious personal injury.

For best results, tap the trimmer head on bare ground or hard soil. If line release is

attempted in tall grass, the motor may overheat. Always keep the trimming line fully

extended. Line release becomes more difﬁcult as the cutting line becomes shorter.

LOAD NEW CUTTING LINE

NOTICE: Always use the recommended nylon cutting line with diameter not greater

than 0.095in. (2.4mm). Using line other than that speciﬁed may cause the string

trimmer to overheat or become damaged.

WARNING:

Never use metal-reinforced line, wire, or rope, etc. These can break

off and become dangerous projectiles.

WARNING:

To prevent serious personal injury, remove the battery pack from

the power head before servicing, cleaning, changing attachments or removing material

from the unit.

1. Remove the battery pack.

2. Remove the remaining cutting line,

if necessary. Simply pull it out by

hand.

3. Cut one piece of cutting line 16 ft.

(5m) long. Insert the line into the

eyelet. Push the line until the end

of the line comes out of the other

side of the trimmer head. Pull the

line from the other side until equal

amounts of line appear on both

sides (Fig. 8).

4. Press and rotate lower cover

assembly in the direction indicated

by the arrow to wind the cutting

line onto the spool that until

approximately 5.5 in. (14cm) of line

is showing on each side (Fig. 9).

9

5.5” (14 cm)

8

Arrow Direction

Eyelet

STRING TRIMMER ATTACHMENT — STA1500/STA1500-FC20

5. Push the lower cover assembly down while pulling on the lines to manually

advance the line and to check for proper assembly of the trimmer head.

When the cutting line breaks from the line outlet or the cutting line is not released when

the trimmer head is tapped, follow the steps below:

1. Remove the battery pack.

2. Hold the trimmer head as shown in

Fig. 10 and use one thumb to press

one release tab on either side while

gently pulling on the lower cover

assembly with the other hand to

release the tab.

3. Repeat on the other side to release

the other release tab from the

trimmer head.

4. Remove the lower cover assembly

with the spring from the trimmer

head (Fig. 11 & 12).

5. Remove the cutting line from the

spool (Fig. 12).

10

Release Tab

11

Spring

Lower Cover Assembly

12

La page charge ...

EGO 2592347 Manuel utilisateur

Ce manuel convient également à

EGO 2592347 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents