EGO STA1600 String Trimmer Attachment Manuel utilisateur

OPERATOR'S MANUAL

STRING TRIMMER

ATTACHMENT

MODEL NUMBER STA1600/STA1600-FC

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

Español p. 79

Français p. 39

16-1107_EGO_STA1500_StringTrimmerAttachment_manual_NA_V1

EXCLUSIVELY FOR USE WITH

EGO POWER+ POWER HEAD

PH1400/PH1400-FC/PH1420/PH1420-FC

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC2

TABLE OF CONTENTS

Safety Symbols ..........................................4

Safety Instructions .....................................5-12

Introduction ............................................13

Specications ..........................................14

Packing List ............................................14

Description .........................................15-16

Assembly ...........................................17-19

Operation ...........................................20-26

Maintenance ........................................27-31

Troubleshooting ......................................32-35

Warranty ...........................................36-37

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 3

READ ALL INSTRUCTIONS!

READ & UNDERSTAND

OPERATOR'S MANUAL

WARNING: Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contains chemicals known to the state of California

to cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

◾Lead from lead-based paints

◾Crystalline silica from bricks and cement and other masonry products, and

◾Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemicals: work in a well ventilated area, and

work with approved safety equipment, such as those dust masks that are specially

designed to ﬁlter out microscopic particles.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC4

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger.

The instructions and warnings they give are no substitutes for proper accident

prevention measures.

WARNING: Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”

and “CAUTION” before using this tool. Failure to following all instructions listed below

may result in electric shock, ﬁre, and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.

May be used in conjunction with other symbols or pictographs.

WARNING: The operation of any power tools can result in foreign

objects being thrown into your eyes, which can result in severe eye

damage. Before beginning power tool operation, always wear safety

goggles or safety glasses with side shield and a full face shield when

needed. We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields. Always use eye

protection which is marked to comply with ANSI Z87.1.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 5

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read,

understand, and follow all instructions on the machine before attempting to assemble

and operate it.

Safety Alert Indicates a potential personal injury hazard.

Read &

Understand

Operator's

Manual

To reduce the risk of injury, user must read and

understand the operator’s manual before using

this product.

Wear Eye

Protection

Always wear safety goggles or safety glasses

with side shields and a full face shield when

operating this product.

Recycle Symbol

This product uses lithium-ion (Li-Ion) batteries.

Local, state, or federal laws may prohibit disposal

of batteries in ordinary trash. Consult your

local waste authority for information regarding

available recycling and/or disposal options.

Beware of thrown

objects Alerts user to beware of thrown objects

Disconnect

battery before

maintenance

Alerts user to disconnect battery before

maintenance.

Wear ear

protection Alerts user to wear ear protection

Wear head

protection Alerts user to wear head protection

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC6

The distance

between the

machine and

bystanders shall

be at least 50 ft

(15 m)

Alerts user to keep the distance between the

machine and bystanders be at least 50 ft (15 m)

Do not use metal

blades Alerts user not to use metal blades

IPX4 Ingress Protection

Degree Protection from splashing water

V Volt Voltage

mm Millimeter Length or size

cm Centimeter Length or size

in. Inch Length or size

kg Kilogram Weight

lb Pound Weight

Direct Current Type or a characteristic of current

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 7

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings, instructions, illustrations and

specications provided with this power tool.

Failure to follow all instructions listed

below may result in electric shock, ﬁre and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

The term “power tool” in the warnings refers to your mains-operated (corded) power

tool or battery-operated (cordless) power tool.

Work area safety

◾Keep work area clean and well lit. Cluttered or dark areas invite accidents.

◾Do not operate power tools in explosive atmospheres, such as in the

presence of ammable liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

◾Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Electrical safety

◾Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.

◾Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

◾Do not operate the machine in rain or wet conditions.Water entering the

machine may increase the risk of electric shock or malfunction that could result

in personal injury.

◾Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

◾When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC8

◾If operating a power tool in a damp location is unavoidable, use a ground

fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk

of electric shock.

Personal safety

◾Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A moment of inattention while

operating power tools may result in serious personal injury.

◾Use personal protective equipment. Always wear eye protection. Protective

equipment such as a dust mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce personal injuries.

◾Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up or

carrying the tool. Carrying power tools with your ﬁnger on the switch or

energising power tools that have the switch on invites accidents.

◾Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

◾Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

◾Dress properly. Do not wear loose clothing or jewelry. Keep your hair and

clothing away from moving parts. Loose clothes, jewelry or long hair can be

caught in moving parts.

◾If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust

collection can reduce dust-related hazards.

◾Do not let familiarity gained from frequent use of tools allow you to become

complacent and ignore tool safety principles. A careless action can cause

severe injury within a fraction of a second.

Power tool use and care

◾Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 9

◾Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

◾Disconnect the plug from the power source and/or remove the battery

pack, if detachable, from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool accidentally.

◾Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power

tool. Power tools are dangerous in the hands of untrained users.

◾Maintain power tools and accessories. Check for misalignment or binding

of moving parts, breakage of parts and any other condition that may affect

the power tool’s operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

◾Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

◾Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended

could result in a hazardous situation.

◾Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and control

of the tool in unexpected situations.

Battery tool use and care

◾Recharge only with the charger specied by the manufacturer. A charger that

is suitable for one type of battery pack may create a risk of ﬁre when used with

another battery pack.

◾Use power tools only with specically designated battery packs. Use of any

other battery packs may create a risk of injury and ﬁre.

◾When battery pack is not in use, keep it away from other metal objects, like

paper clips, coins, keys, nails, screws or other small metal objects, that

can make a connection from one terminal to another. Shorting the battery

terminals together may cause burns or a ﬁre.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC10

◾Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, ush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected from the battery may

cause irritation or burns.

◾Do not use a battery pack or tool that is damaged or modied. Damaged or

modiﬁed batteries may exhibit unpredictable behaviour resulting in ﬁre, explosion

or risk of injury.

◾Do not expose a battery pack or tool to re or excessive temperature.

Exposure to ﬁre or temperature above 265°F (130°C) may cause explosion.

◾Follow all charging instructions and do not charge the battery pack or

tool outside the temperature range specied in the instructions. Charging

improperly or at temperatures outside the speciﬁed range may damage the

battery and increase the risk of ﬁre.

Service

◾Have your power tool serviced by a qualied repair person using only

identical replacement parts. This will ensure that the safety of the power tool is

maintained.

◾Never service damaged battery packs. Service of battery packs should only be

performed by the manufacturer or authorized service providers.

String trimmer safety warnings

◾Do not use the machine in bad weather conditions, especially when there is

a risk of lightning. This decreases the risk of being struck by lightning.

◾Thoroughly inspect the area for wildlife where the machine is to be used.

Wildlife may be injured by the machine during operation.

◾Thoroughly inspect the area where the machine is to be used and remove

all stones, sticks, wires, bones, and other foreign objects. Thrown objects can

cause personal injury.

◾Before using the machine, always visually inspect to see that the cutter or

blade and the cutter or blade assembly are not damaged. Damaged parts

increase the risk of injury.

◾Follow instructions for changing accessories. Improperly tightened blade

securing nuts or bolts may either damage the blade or result in it becoming

detached.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 11

◾Wear eye, ear, head and hand protection. Adequate protective equipment will

reduce personal injury by ﬂying debris or accidental contact with the cutting line

or blade.

◾While operating the machine, always wear non-slip and protective footwear.

Do not operate the machine when barefoot or wearing open sandals. This

reduces the chance of injury to the feet from contact with the moving cutters or

lines

◾While operating the machine, always wear long trousers. Exposed skin

increases the likelihood of injury from thrown objects.

◾Keep bystanders away while operating the machine. Thrown debris can result

in serious personal injury.

◾Always use two hands when operating the machine. Holding the machine

with both hands will avoid loss of control.

◾Hold the machine by the insulated gripping surfaces only, because the

cutting line or blade may contact hidden wiring. Cutting line or blades

contacting a “live” wire may make exposed metal parts of the machine “live” and

could give the operator an electric shock.

◾Always keep proper footing and operate the machine only when standing on

the ground. Slippery or unstable surfaces may cause a loss of balance or control

of the machine.

◾Do not operate the machine on excessively steep slopes. This reduces the

risk of loss of control, slipping and falling which may result in personal injury.

◾When working on slopes, always be sure of your footing, always work

across the face of slopes, never up or down and exercise extreme caution

when changing direction. This reduces the risk of loss of control, slipping and

falling which may result in personal injury.

◾Keep all parts of the body away from the cutter, line or blade when the

machine is operating. Before you start the machine, make sure the cutter,

line or blade is not contacting anything. A moment of inattention while

operating the machine may result in injury to yourself or others.

◾Do not operate the machine above waist height. This helps prevent unintended

cutter or blade contact and enables better control of the machine in unexpected

situations.

◾When cutting brush or saplings that are under tension, be alert for spring

back. When the tension in the wood ﬁbers is released, the brush or sapling may

strike the operator and/or throw the machine out of control.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC12

◾Use extreme caution when cutting brush and saplings. The slender material

may catch the blade and be whipped toward you or pull you off balance.

◾Maintain control of the machine and do not touch cutters, lines or blades

and other hazardous moving parts while they are still in motion. This

reduces the risk of injury from moving parts.

◾Carry the machine with the machine switched off and away from your body.

Proper handling of the machine will reduce the likelihood of accidental contact

with a moving cutter, line or blade

◾Only use replacement cutters, lines, cutting heads and blades specied by

the manufacturer. Incorrect replacement parts may increase the risk of breakage

and injury.

◾When clearing jammed material or servicing the machine, make sure the

switch is off and the battery pack is removed. Unexpected starting of the

machine while clearing jammed material or servicing may result in serious

personal injury.

◾Damage to Trimmer - If you strike a foreign object with the trimmer or it

becomes entangled, stop the tool immediately, check for damage and have any

damage repaired before further operation is attempted. Do not operate with a

broken guard or spool.

◾If the equipment should start to vibrate abnormally, stop the motor and

check immediately for the cause. Vibration is generally a warning of trouble. A

loose head may vibrate, crack, break or come off the trimmer, which may result

in serious or fatal injury. Make sure that the cutting attachment is properly ﬁxed

in position. If the head loosens after ﬁxing it in position, replace it immediately.

Never use a trimmer with a loose cutting attachment.

◾Use Only With The 56V Lithium-Ion Power Head PH1400/PH1400-FC/PH1420/

PH1420-FC.

NOTE: SEE YOUR POWER HEAD OPERATOR’S MANUAL FOR

ADDITIONAL SPECIFIC SAFETY RULES.

SAVE THESE INSTRUCTIONS!

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 13

INTRODUCTION

Congratulations on your selection of the STRING TRIMMER ATTACHMENT. It has been

designed, engineered and manufactured to give you the best possible dependability

and performance.

Should you experience any problem you cannot easily remedy, please contact EGO

customer service center 1-855-EGO-5656.

This manual contains important information on the safe assembly, operation and

maintenance of your string trimmer. Read it carefully before using the string trimmer.

Keep this manual handy so you can refer to it at any time.

SERIAL NUMBER _____________________ DATE OF PURCHASE _________________

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A

SAFE PLACE FOR FUTURE REFERENCE

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC14

SPECIFICATIONS

Maximum Speed 5800 /min (RPM)

Cutting Mechanism Bump Head

Cutting Line Type 0.095" (2.4 mm) nylon twist line

Cutting Swath 16 in. (40 cm)

Recommended Operating Temperature 32°F – 104°F (0°C – 40°C)

Recommended Storage Temperature -4°F – 158°F (-20°C – 70°C)

Weight 3.36 lb. (1.53 kg)

Recommended Cutting Line

PART NAME TYPE MODEL NUMBER

Cutting Line 0.095"/2.4mm twist line

AL2420P

AL2420PD

AL2450S

PACKING LIST

PART NAME QUANTITY

String Trimmer Attachment 1

Guard 1

4 mm Hex Key 1

Operator's Manual 1

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 15

DESCRIPTION

KNOW YOUR STRING TRIMMER ATTACHMENT (Fig. 1)

The safe use of this product requires an understanding of the information on the tool and

in this operator’s manual, as well as knowledge of the project you are attempting. Before

using this product, familiarize yourself with all operating features and safety rules.

1

Hex Key

Guard

Line-cutting Blade

Cutting Line

Trimmer Head

(Bump Head)

Line-loading

Button

Release Tab

String-trimmer Shaft

End Cap

WARNING: Never operate the tool without the guard ﬁrmly in place. The guard

must always be on the tool to protect the user.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC16

TRIMMER HEAD (BUMP HEAD)

Stores the cutting line and releases the cutting line when the head is lightly tapped on

the ground during operation.

GUARD

Reduces the risk of injury from foreign objects ﬂung backwards toward the operator

and from contact with the cutting attachment.

LINE-CUTTING BLADE

Steel blade on the guard that maintains the cutting line at the proper length.

RELEASE TAB

Releases the spool retainer from the spool base.

LINE-LOADING BUTTON

Press this button to automatically wind the line into the trimmer head.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 17

ASSEMBLY

WARNING: If any parts are damaged or missing, do not operate this product

until the parts are replaced. Use of this product with damaged or missing parts could

result in serious personal injury.

WARNING: Do not attempt to modify this product or create accessories not

recommended for use with this string trimmer. Any such alteration or modiﬁcation is

misuse and could result in a hazardous condition leading to possibly serious personal

injury.

WARNING: Do not connect to power head until assembly is complete. Failure to

comply could result in accidental starting and possible serious personal injury.

UNPACKING

◾This product requires assembly.

◾Carefully remove the product and any accessories from the box. Make sure that

all items listed in the packing list are included.

WARNING: Do not use this product if any parts on the Packing List are already

assembled to your product when you unpack it. Parts on this list are not assembled to

the product by the manufacturer and require customer installation. Use of a product

that may have been improperly assembled could result in serious personal injury.

◾Inspect the tool carefully to make sure that no breakage or damage occurred

during shipping.

◾Do not discard the packing material until you have carefully inspected and

satisfactorily operated the tool.

◾If any parts are damaged or missing, please return the product to the place of

purchase.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC18

MOUNTING THE GUARD

NOTICE: Install the guard before the

attachment is connected to the power head.

WARNING: To reduce the risk of

injury to people, do not operate without

guard in place.

WARNING: Always wear gloves

when mounting or replacing the guard. Be

careful of the line-cutting blade on the guard

and protect your hands from being injured

by the blade.

1. Loosen the two bolts in the guard

with the supplied hex key; remove

the bolts and spring washers from

the guard (Fig. 2).

2. Lift the trimmer head and face it

upward; align the two mounting

holes in the guard with the two

assembly holes in the base of the shaft. Make sure that the internal surface of the

guard faces towards the trimmer head (Fig. 3).

3. Use the supplied hex key to secure the guard in place with the bolts and washers.

CONNECTING THE STRING TRIMMER ATTACHMENT TO THE POWER HEAD

WARNING: Never attach or adjust any attachment while the power head is

running or with the battery installed. Failure to stop the motor and remove the battery

may cause serious personal injury.

This string trimmer attachment is designed for use with EGO Power Head PH1400/PH1400-FC/

PH1420/PH1420-FC.

The string trimmer attachment connects to the power head by means of a coupler device.

1. Stop the motor and remove the battery pack.

2. Loosen the wing knob on the power-head coupler.

3

2

Line-cutting Blade

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 19

3. If the end cap is on the string trimmer attachment shaft, remove it and save it in a

safe place for later use. Align the arrow on the string trimmer shaft with the arrow

on the coupler (Fig. 4a) and push the string trimmer shaft into the coupler until

you hear a clear “CLICK” sound. The coupler should be positioned all the way to

the RED LINE labeled on the string trimmer shaft: the red line must be ﬂush with

the coupler edge (Fig. 4b).

4. Pull the shaft of the string trimmer attachment to verify that it is securely locked into

the coupler. If not, rotate the string trimmer shaft from side to side in the coupler until a

clear “CLICK” sound indicates that it is engaged.

5. Tighten the wing knob securely.

WARNING: Be certain that the wing knob is fully tightened before operating the

equipment; check it periodically for tightness during use to avoid serious personal injury.

4a

Arrow on the Coupler

Arrow on the Attachment Shaft

Attachment Shaft

Shaft-release Button

Power-head Shaft

Wing Knob

4b

Red Line

REMOVING THE ATTACHMENT FROM THE POWER HEAD

1. Stop the motor and remove the battery pack.

2. Loosen the wing knob.

3. Press the shaft-release button and, with the button depressed, pull or twist the

attachment shaft out of the coupler.

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC20

OPERATION

WARNING: Do not allow familiarity with this product to make you careless.

Remember that a careless fraction of a second is sufﬁcient to inﬂict serious injury.

WARNING: Always wear safety goggles or safety glasses with side shield

marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown

into your eyes and other possible serious injuries.

WARNING: Do not use any attachments or accessories not recommended by the

manufacturer of this product. The use of attachments or accessories not recommended

can result in serious personal injury.

APPLICATIONS

You may use this product for the purpose listed below:

◾Trimming grass and weeds from around porches, fences, and decks.

HOLDING THE STRING TRIMMER

WITH POWER HEAD (Fig. 5)

WARNING: Dress properly to

reduce the risk of injury when operating

this tool. Do not wear loose clothing

or jewelry. Wear eye and ear/hearing

protectors. Wear heavy, long pants, boots

and gloves. Do not wear short pants or

sandals or go barefoot.

Hold the string trimmer with one hand on the rear handle and your other hand on the

front handle. Keep a ﬁrm grip with both hands while operating the tool. The string

trimmer should be held at a comfortable position, with the rear handle at about hip

height. The trimmer head should be parallel to the ground so that it easily contacts the

material to be cut without the operator having to bend over.

USING THE STRING TRIMMER

WARNING: To avoid serious personal injury, wear goggles or safety glasses at all

times when operating this unit. Wear a face mask or dust mask in dusty locations.

5

La page est en cours de chargement...

EGO STA1600 String Trimmer Attachment Manuel utilisateur

EGO STA1600 String Trimmer Attachment Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents